Engineering Jobs in New Canaan, CT

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

 The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

Diagnostics & Repair

• Independently diagnose and repair:
  • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
  • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
  • Air and hydraulic brake systems, ABS, and suspension components.
  • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
  • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

Preventive Maintenance & Compliance

• Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
• Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
• Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

Road Calls & Operational Support

• Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
• Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

Mentorship, Training & Documentation

• Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
• Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
• Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. 

Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
• Performs repairs and assigned preventative maintenance services.
• Estimates time and material cost on vehicle repairs and requisition of new parts.
• Conduct safety checks on vehicles.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
• Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
• Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
• This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
• Assists Sr. Technicians in the completion of project work.

• Applicants must be at least 18 years of age and legally eligible to work in the United States.
• A valid driver’s license is required. CDL a plus.
• At least 5 years of experience in job duties.
• Sanitation or construction industry experience a plus.
• Computer diagnostic experience as diesel technician a plus.
• Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
• Working knowledge of applicable DOT and OSHA standards and regulations.
• Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
• Must be able to meet the physical and safety requirements of the position.
• Must be able to provide own tools

Work Environment

• We are continuously investing in equipment, and many of our trucks are less than 2 years old.
• Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings.
• Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
• Personal Protective Equipment (PPE) will be provided.
• The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Schedule:

Overnight Wednesday to Sunday 6pm to 5am.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

• Performs all work in accordance with established safety procedures. 
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.  
• Assists in the repair and adjustment of equipment.  
• Washes vehicles and equipment.  
• Conducts safety checks on vehicles.  
• Assists with service calls for breakdowns.  
• Perform other maintenance related work as required. 
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. 

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.Preform other duties as assigned.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio!  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. 

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. 

Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
• Performs repairs and assigned preventative maintenance services.
• Estimates time and material cost on vehicle repairs and requisition of new parts.
• Conduct safety checks on vehicles.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
• Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
• Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
• This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
• Assists Sr. Technicians in the completion of project work.

• Applicants must be at least 18 years of age and legally eligible to work in the United States.
• A valid driver’s license is required. CDL a plus.
• At least 5 years of experience in job duties.
• Sanitation or construction industry experience a plus.
• Computer diagnostic experience as diesel technician a plus.
• Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
• Working knowledge of applicable DOT and OSHA standards and regulations.
• Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
• Must be able to meet the physical and safety requirements of the position.
• Must be able to provide own tools

Work Environment

• We are continuously investing in equipment, and many of our trucks are less than 2 years old.
• Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings.
• Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
• Personal Protective Equipment (PPE) will be provided.
• The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

Requirements

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.
• Preform other duties as assigned.

What We Offer?

• Competitive wage (based on experience) plus Time and a half for Overtime.
• Union Shop.
• Medical, dental, vision, life, short-term and long-term disability coverage.
• 401(k).
• Uniforms provided with laundry services.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

This position is for the Overnight Shift 2am - 1030am Monday to Friday

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets.  This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet.

Advanced Diagnostics & Complex Repairs

• Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:
• Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems).
• CAN-bus and multiplex electrical systems, electronic control modules, and communication networks.
• Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs.
• Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds.

Technical Leadership & Training

• Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks.
• Assist in training on:
  • Diagnostic software and tools.
  • New equipment technology, safety systems, and telematics.
  • Company maintenance standards, PM strategies, and repair procedures.

Fleet Reliability, Compliance & Continuous Improvement

• Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications.
• Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT.
• Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC).

Operational & Customer Support

• Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area.
• Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets.
• Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety.

Administrative & Leadership Duties (as assigned)

• Help plan daily shop workload and allocate jobs according to technician skill level.
• Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts.
• Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop.

• High school diploma or GED required; additional technical training strongly preferred.

• A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul.
• CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads.

• Demonstrated expert-level knowledge of:
  • Heavy truck and refuse systems.
  • Refuse hydraulic, electrical, and powertrain systems.
  • Diagnostic software, scan tools, and OEM service information.
• Proven track record of performing complex diagnostics and repairs independently.
• Must provide own professional-grade tools required for diagnostic and repair work.
• ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred.
• Possession of a valid driver’s license is required.
• Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred.
• Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred.
• Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Our client is a well-established, global FinTech company that supports the financial services industry in the digital transformation of their incentive and retention award plan administration processes. Their clients include some of the most prominent banks, asset managers, wealth managers, insurance companies and private capital firms in the world. They employ over 90 professionals in offices throughout the U.S. and Europe in an entrepreneurial culture that places significant value on employees. The company is proud that nearly a quarter of their employees have been with them for over ten years, and that many of their leaders have been promoted through the organization. Despite having already achieved a sizeable market share, the company is poised to capitalize on tremendous growth opportunities that exist in the current U.S. and European target markets and in untapped markets throughout Asia and the Middle East.

The Role: Executive Services Associate / Team Support

The Executive Services Associate is a great client service role to accelerate or start your career and give you valuable training and exposure to all departments with direct contact to clients. S/he will closely support the Executive Services team by liaising with executives regarding reporting, data and analytics, communicating regarding clients’ online investment and compensation plan accounts, facilitating the set-up and execution of related events and communications.

Ongoing responsibilities will include:

• Communicate with Financial Services executives via phone and email regarding online client requests
• Act as Team Support to help at the front desk in answering calls, assisting with administrative tasks, booking meetings and travel, maintaining and restocking office kitchen, and other special projects as needed.
• Coordinate the resolution of complex issues or concerns received from executives with input from various internal or external teams.
• Special projects or any other requests by the Executive Services Manager.
• Facilitate the set-up and execution of plan related events including, but not limited to: event creation within the Company system, document generation and posting, collection of electronic signatures and elections and communication management.
• Coordinate with internal teams to process market events and corporate actions for both domestic and international securities.
• Compile and deliver executive and plan related data analytics to clients.
• Provide feedback about business processes to promote a high level of efficiency.
• Work with clients’ HR and Recruiting departments to assess and perform valuations of deferred compensation awards held by potential hires/new hires.
• Communicate with clients’ HR, Recruiting and Legal departments to resolve general inquiries relating to client request
• Coordinate the resolution of complex issues or concerns received from executives with input from various internal or external teams.
• Compile and deliver executive, plan and award related data analytics to clients.
• Analyze business inefficiencies and assist with process (re)engineering.

Compensation and Professional Development

The chosen candidate will earn a competitive base salary, be eligible for a discretionary performance bonus and will participate in a generous benefits package. Given the company’s history of promoting from within, it is anticipated that the successful candidate will have numerous opportunities for growth within functional areas throughout the organization. Further, success in this role will broaden the candidate’s credentials within the marketplace while vastly expanding their professional network within the financial services industry.

Candidate Profile & Qualifications

Ideal candidates will have an aptitude to learn, will enjoy problem solving and will possess outstanding organization skills. Candidates should be creative, outside-the-box thinkers who thrive in a client-focused setting. Previous client service is a plus. In addition, candidates should have a genuine interest in pursuing a long-term career in the FinTech sector.

About Liberty:

Founded in Boston, Massachusetts in 2007, Liberty offers expertise in a broad array of construction and equipment services nationwide including general requirements, equipment, supply, concrete, special projects, and site access solutions. Our experience, combined with our innovative approach and stellar customer service, ensures a seamless experience —with safety and reliability at the forefront. We’ve built strong relationships with key contractors and clients in every sector, including commercial, residential, healthcare, and higher education.

Overview:

Responsible for a broad spectrum of duties, covering all aspects of project management, including project planning, cost management, cost estimating, time/labor management, quality management, contract administration, and safety management. The Senior Project Manager is responsible for ensuring that all aspects of project management are successfully completed. Manages overall project planning, scheduling, resource allocation, project specific estimating, submittal/RFI procurement, document control, constructability resolutions, aspects of project accounting, project specific purchasing and safety, while providing technical direction and ensuring compliance with quality standards.

Duties & Responsibilities:

• Oversees the construction project from start to finish.
• Develops project schedules and labor plans.
• Ensures optimum utilization of resources, including labor, materials and equipment, and their procurement at most cost-effective terms.
• Develops effective communications and mechanisms for resolving conflicts among various stakeholders and participants.
• Manages project estimating including all project changes.
• Oversees Submittal/RFI Procurement.
• Ensures proper Document Controls both in the office and in the field.
• Works with the accounting office to ensure that all aspects of Project accounting functions are complete.
• Ensures that construction activities move according to pre-determined schedule.
• Devises the project work plans and make revisions as and when need arises.
• Communicates effectively with the field staff, construction managers, clients and sub-contractors.
• Monitors the progress of the construction activities on a regular basis and holds regular status meetings with our field staff.
• Maintains strict adherence to budgetary guidelines, quality and safety standards.
• Performs weekly inspections of construction sites.
• Attends weekly project meetings.
• Identifies and proposes solid solutions to constructability issues.
• Reports weekly on project status.
• Performs multiple duties as necessary to timely and accurately complete project responsibilities (PM/APM/Asst. Est./ ETC.).
• Travels as needed to support the organization as needed.
• Maintains a complete understanding of the current status of the assigned project and organization, contributing to the growth and success of the business.
• Performs other related duties as required or directed.

Qualifications:

• Bachelor's degree in engineering or construction management.
• High degree of Division 6, 10, 12, 32 construction knowledge and analytical skills preferred.
• Strong ability to read and understand project plans and specifications.
• Robust experience with project planning, forecasting and cost Estimating.
• Proficiency with PC and software, including Microsoft Office, Digital Takeoff programs, Bluebeam, Onscreen Takeoff, AutoCAD, Microsoft Project and Timberline.
• A strong understanding of the critical importance of project safety.
• Excellent communication, organization and time management skills.
• Ability to effectively plan, organize and schedule and make logical decisions based on new information.
• Ability to work and contribute in a professional, team-oriented environment.
• Willingness and ability to wear multiple hats (PM/APM/Asst. Est./Asst. BIM, etc.)
• Ability to travel to other regions as needed.

Working Conditions:

Construction jobsite and warehouse conditions, which include exposure to high temperatures; cool/cold temperatures; weather conditions, and loud noises. Some general office and construction trailer working conditions. Job site walking.

Physical Requirements:

While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level and spend additional time on the physical job site or construction trailer. Job site walking.

Disclaimer:

The Above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day.

LOCATION Ridgefield, CT

JOB TYPE Full-Time, On-Site

COMPANY DESCRIPTION

Vibrant Building Technologies is building the next generation of home health technology — hardware and software designed to actively manage the environment people live in.

Our first product is an intelligent HVAC platform. We are transitioning from product development into manufacturing and building the operational foundation to produce our systems at scale. Our commitment is to American manufacturing and uncompromising product quality.

ROLE DESCRIPTION

We are looking for a Head of Manufacturing & Test Operations to build Vibrant's manufacturing organization from the ground up. This role is full-time and on-site in Ridgefield, CT.

This is not a maintenance role inside an established factory. This is a 0 to 1 build.

You will design the production floor, implement manufacturing systems, develop testing infrastructure, and establish the quality processes that ensure every system leaving the facility performs reliably in the field. You will work directly with executive leadership to define how our products are built, tested, and delivered.

The right person is both strategic and hands-on — comfortable defining manufacturing architecture and stepping onto the floor to debug hardware and solve problems. Your work will directly determine Vibrant's ability to scale.

RESPONSIBILITIES

Manufacturing System Architecture

• Design and build Vibrant's manufacturing operations from the ground up
• Define production line architecture, workstation layouts, and assembly flow
• Establish SOPs, assembly instructions, and process controls
• Implement systems for inventory, traceability, and production tracking

Production Operations

• Own throughput, yield, and reliability across all manufacturing lines
• Launch and stabilize new production stations and assembly processes
• Identify and eliminate bottlenecks affecting cycle time and output
• Drive continuous improvement across efficiency and cost structure

Test Infrastructure & QA

• Design and deploy production testing infrastructure for every manufactured unit
• Develop automated and manual test procedures to validate system performance
• Establish root cause analysis processes for production failures and field returns
• Partner with engineering on validation testing and product verification

Supply Chain & Component Quality

• Manage vendor performance and component quality with supply chain leadership
• Establish incoming quality control processes for critical components
• Maintain feedback loops between production, suppliers, and product development

Team Building & Leadership

• Recruit, train, and develop Vibrant's early manufacturing team
• Build a culture of ownership, accountability, and operational excellence
• Serve as the escalation point for all manufacturing and quality issues

Cross-Functional Execution

• Close feedback loops between design and production with hardware, firmware, and software teams
• Support prototype builds, pilot runs, and engineering validation cycles
• Partner with executive leadership on scaling strategy and facility expansion

WHAT SUCCESS LOOKS LIKE — FIRST 12 TO 18 MONTHS

• A stable, repeatable manufacturing line running at consistent throughput
• Production testing infrastructure validating every unit before shipment
• QA processes that significantly reduce field failures and service escalations
• Throughput increased without sacrificing quality
• Operational foundation in place to scale production significantly
• A high-ownership manufacturing team performing at a high level

YOU MIGHT BE A FIT IF

• You enjoy building systems from scratch rather than maintaining existing ones
• You have taken a hardware product from prototype into real production and understand what scaling physical products actually requires
• You move comfortably between strategic planning and hands-on execution — process design, production debugging, test fixture improvement
• You believe great manufacturing leaders belong on the production floor
• You are motivated by ownership and want to directly shape how a company builds and delivers its products
• You are energized by environments where the playbook is still being written
• You take pride in eliminating operational chaos through durable systems, not constant firefighting

You will likely thrive here if you are the type of person who looks at an empty production floor and immediately starts thinking about the systems, processes, and team required to bring it to life.

QUALIFICATIONS

Required:

• 5+ years in manufacturing, production engineering, or industrial engineering
• Experience scaling hardware production in fast-moving environments
• Strong technical understanding of electromechanical systems
• Able to operate across strategy and execution — from system design to shop floor
• Track record of building durable processes, not just solving immediate fires

Strongly Preferred:

• Experience at an early-stage hardware company
• Background designing production test systems for complex hardware
• Familiarity with HVAC or similar electromechanical products
• Experience with MES or manufacturing analytics systems

Position: Construction Superintendent 

Job Location: Greenwich CT, and Other Cities/ Towns 

Main Office: 250 Sargent Drive, New Haven, CT

Company: VASE Construction

Industry: Construction Management | Real Estate Development | General Contracting

Reports To: Project Manager, Vice President / Chief Estimator

Contact: ; 2

Company Description

VASE is a Construction Management firm overseeing renovations and new construction projects for public and private sectors, including government agencies, institutions, hospitals, and nonprofits. Learn more at

VASE is a leader in construction management, combining expertise with cutting-edge practices to deliver exceptional project results. The company is dedicated to exceeding industry standards, prioritizing efficiency and quality craftsmanship in all aspects of its operations. With a strong focus on innovation and client satisfaction, VASE Construction strives to streamline workflows and ensure the success of every project. Our commitment to excellence and a collaborative approach define who we are.

Role Description

We are seeking a dedicated Construction Superintendent for a full-time, on-site role in Greenwich, CT as well as other towns in Connecticut. The Construction Superintendent will oversee daily on-site operations, ensure projects are completed efficiently, and maintain high-quality standards. The responsibility includes supervising construction teams, coordinating schedules, enforcing safety regulations, managing budgets, and ensuring project timelines are met.

Qualifications

1. Experience in Construction Site Management and Construction Safety practices
2. 5+ Years Experience in a Superintendent role is required
3. Thorough understanding of construction processes, materials, and equipment
4. Proficiency in interpreting construction blueprints and documents
5. Proficiency in Excel, Word, Procore, or related Project Management software
6. Strong Project Management and Budgeting skills
7. Exceptional Organization Skills and the ability to manage multiple priorities effectively
8. Excellent communication and leadership abilities
9. Bachelor's degree in Construction Management, Engineering, Architecture, or related field preferred
10. Self-starter with the ability to multitask and work both independently and collaboratively.

Qualifications and Getting Started

Competitive salary commensurate with experience, plus benefits. To Apply: Send your resume and a brief cover letter to with the subject line “Construction Superintendent – [Your Name]”. For further assistance, call 2