Engineering Jobs in Nellis Afb Nv Flexible
179 positions found — Page 5
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Working under general technical guidance, an Electronic Technician III specializes in ground-based electronic systems, communications infrastructure, and works on various types of electronic and network equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing Employee will be responsible for the following functions/duties: Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements.
Determines when equipment malfunctions warrant shutdown of various systems.
Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation.
Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems Utilizes technical knowledge of electronic principles to troubleshoot and solve problems using diagrams, schematics, engineering data, and test equipment Diagnose equipment malfunctions and effect repairs to restore equipment to required operating condition Configure equipment utilizing manufacturer software interfaces; troubleshoot to the component level and make needed repairs Lead other junior personnel in the planning and installation activities of new and modified systems Research new products, support integration, develop operator instructions and configuration drawings Perform other job-related duties, as required REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree or higher from an accredited college; or technical schooling with courses in math, basic electronics, and microwave theory; or a military equivalent and a minimum of seven years of hands-on experience are required for this position.
In addition, an Electronic Technician III must possess the following qualifications: Minimum of five years proficiency in maintaining electronic equipment Minimum of five years' experience using multi-meters, oscilloscopes, copper, fiber, and coax testers Minimum of five years maintaining Digital Airport Surveillance Radar (DASR-AN/GPN-30); FMQ-19 or 23 Weather System; GRC, GRT, GRR, CM-300, URC-200 Radio Systems; FCS-127 ETVS; GSH-74 DALR, Instrument Landing System (ILS), TACAN, associated support equipment Interpret drawings, training manuals, and instructions in order to perform duties Good understanding of electronic, electro-mechanical, and computer systems Experience maintaining ground to air VHF/UHF radios Demonstrated ability to troubleshoot to the component level and competency in soldering.
SALARY This non-exempt position offers an AWD Rate of $36.59 per hour.
Note: The salary offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer matching JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee will be required to work some shift work, at remote locations, off site mission support and occasional over-night assignments.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs, (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JELT4, JOM68; A2NTTR
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Perform operations on assigned Joint Data Network (JDN) / Link-16 equipment.
Perform a variety of assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic/mechanical equipment and systems.
Supports functions as a network manager for locally operated networks and modify and operate equipment associated with Link-16 as required.
Provides the correct information required to operate in the network (as extracted from the appropriate Operational Tasking Data Links (OPTASK LINK) message) directly to own-unit platforms and to other participants.
Extracts data from an OPTASK LINK message, as defined in Mil-STD 6040, U.S.
Message Text Formatting Program and to provide platforms with data essential to operate Tactical Data Links (TDL).
Align track number blocks with procedures as indicated in the appropriate TDL section of the OPTASK LINK.
Acts as a Multi-TDL expert and interfaces between wing TDL participants and other elements of the TDL operational infrastructure.
Interfaces between own unit platforms and the exercise/host manager when wing assets are either participating in an exercise or deploying to participate in TDL operations managed by another unit.
Coordinates unit TDL equipment requirements and the networks to meet local unit requirements, to include interfacing between the wing and higher level agencies.
Knowledge of and follow procedures mandated in CJCSM 6120.01, Joint Multi-Tactical Data Link Operating Procedures when operating TDL's.
Maintain a TDL reference library.
The employee shall obtain network descriptions for all networks, to include joint and allied networks, and maintain them in a local TDL network library for use by operations personnel.
Determines requirements for networks and identifies them to the appropriate agency tasked with providing network support.
Manages training requirements applicable to local and subordinate unit link operators.
Perform other related duties and assignments as directed.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE Associates Degree in a technical discipline or formal academic/vocational/military training with a minimum of 7 years of experience in the specialty field are required for this position.
Minimum of two years of experience with Link-16 equipment.
Completion of JT-101, Introduction to Joint Multi-TDL Network Operations, is required or must be completed upon hire.
Completion of JT-102, Multi-TDL Advanced Joint Interoperability Course, is preferred.
Must be able to obtain and maintain a Network+/Security+ Certification as required.
The incumbent must possess broad knowledge of Link-16 operations.
This position requires knowledge on the Joint Range Extension (JRE) Client Software, Battlefield Command and Control Center
- Theater (BC3-T), Air Defense Systems Integrator, Amalgamated Remote Management System (ARMS), and various other types of associated Link-16 equipment and software.
Excellent communications and analytical skills; working knowledge of computer systems and integrated software application programs.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY -- ESSENTIAL FUNCTIONS/DUTIES A Software Engineer III performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Plans, conducts, and technically implements software engineering projects or major phases of software engineering projects, coordinating the efforts of supporting staff in the performance of work.
This may include Project Management duties.
Leads software development, testing, deployment, integration, documentation, and maintenance in the support of customer requirements.
Employee will be responsible for the following functions/duties: Based on broad objectives from management and customers, independently analyzes, evaluates and integrates solutions to complex technical problems.
Encourages optimum design within customer specifications, quality standards, schedule, and funding limitations.
Assists in formulating engineering project requirements to meet the customer's needs and deadlines.
Develops detailed implementation plans to execute and meet project requirements.
Works closely with project management, hardware engineering, communications engineering, configuration management, quality assurance and operations support to ensure proper integration of software engineering with the other disciplines involved in the project.
Designs, implements, tests, and deploys software projects.
Provides technical guidance, mentoring, direction, and assistance to other engineering team members.
Reviews modifications to system software to ensure compatibility with existing hardware and software.
Ability to solicit and document detailed product requirements; writes technical data packages in support of software development or modifications.
Attends and facilitates meetings as required.
Perform other job-related duties, as required DESIRED QUALIFICATIONS Minimum of ten years work experience.
At least seven years of experience with computer programming using C, C++, and C#.
Ada, FORTRAN, and Assembly Language a plus.
Ability to program in C, C++, and C#.
Experience designing Windows and Linux applications and graphical user interfaces.
Experience with Web Applications and Services toolsets (Vue, React, Java, Java Script, XML, ASP).
Experience with database development (SQL Server, Oracle, Access).
Experience with Open Source software and systems, experience with Jenkins.
Experience with containerization, orchestration, and micro-services architecture, including Docker, Rancher, and Kubernetes.
Experience working with air-gapped networks.
Experience with Hyper-V and/or VMWare.
Knowledge and understanding of formal software development standards and software development processes to include the Software Capability Maturity Model.
Ability to deploy and troubleshoot network applications and systems.
Ability to assist/design in the architecture of new networks, submit requests for hardware/software, and employ it.
Ability to perform system administration activities in Windows and Linux operating system environments.
Sound understanding of network switches and routers.
Ability to effectively interact with system users.
Ability to analyze data, resolve problems, and make decisions independently.
Ability to communicate effectively in both oral and written form.
Ability to write and prepare a variety of technical and user-oriented reports, manual, and other types of written communications.
Ability to cross-collaborate with multiple stakeholders and groups to meet differing requirements.
Ability to establish and maintain effective work relationships with those contacted in the performance of this position.
Ability to travels as required by the company.
REQUIREMENTS -- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor's degree in Software Engineering, Computer Science, Electrical Engineering or an equivalent scientific or technical discipline from an ABET
- accredited academic institution and four-years of related engineering experience, or an accredited Masters of Science in engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
LICENSES OR CERTIFICATIONS Must obtain and maintain CompTIA Security + Certification.
Must possess a valid Nevada Driver's License.
Ability to obtain and maintain a Government Security Clearance.
SALARY The expected salary range for this position is $91,000 to $130,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 30 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB DUTIES
- ESSENTIAL FUNCTIONS An Engineer III performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Employee will be responsible for the following functions/duties: Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface with customers at all levels from quotation to final design and test activities Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation Perform other job-related duties, as required RANGE POSITION DESCRIPTION Key Responsibilities: Provide simulation support for the Joint Simulation Environment project at Nellis AFB, building simulations to support USAF operational test and training missions.
Perform control room functions, including role-playing for constructive air assets, to support test and training exercises.
Assist in developing test planning, test conduct, test processes, test reports, operational procedures, data deliverables, and safety packages.
Simulation Support: Configure the battle space, perform post-test reconfigurations, and prepare the virtual environment with customer-defined threat laydowns.
Develop and implement threat configurations, System Under Test (SUT) configurations, and weapons configurations.
Operate and act as a flyer/operator within the simulation environment to support verification and validation.
Training and Mentorship: Instruct, mentor, and demonstrate to fellow flyers and engineers the threat system, operations, sensor systems, communication and navigation systems, and Pilot Vehicle Interface (PVI).
Modeling and Simulation: Provide modeling and simulation support for the development, upgrade, operations, and integration of constructive, real-time, and virtual piloted simulators.
Support the flying quality, airframe, propulsion, avionics, sensors, weapon, and electronic warfare mission areas.
Engineering Support: Provide operations engineering support for test planning working groups, design reviews, and other related testing activities. REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area Working knowledge of computer systems and computer-based engineering tools Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills and the ability to work under deadlines The incumbent must possess a valid, state issued driver's license.
The Operations/Test Analyst must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
There is occasional lifting up to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY ESSENTIAL FUNCTIONS/DUTIES Serves as subject matter expert (SME) to support development, integration, and fielding of numerous high power and low power RF simulators representing potential military threat systems.
The simulator systems may be transportable/relocatable/remote controlled as required to represent adversary air defense systems and prevailing technology.
The emitters will be a combination of open and closed-loop systems utilizing phased-array antenna systems.
Serves as a systems integration engineer working with vendors to field systems ensuring the following elements are addressed: Provides expert systems/equipment analysis and recommendations to leadership and engineering teams.
Identify and document system level open-loop emitter and closed-loop radar requirements for range integration to include power, communication, instrumentation and command & control.
Validate existing power, communications, instrumentation and command and control (C2) range interface control documents (ICDs) and update/re-create as necessary.
Support the testing and sustainment of advanced radar threat system simulators.
Advanced radars can be defined as digital and phased array systems.
Develop remote operations concept and infrastructure requirements.
Document range modernization needs and generate cost estimates to upgrade the ranges to meet future needs.
Recommends tests, equipment modifications, and corrections to design deficiencies through evaluation of operational capability of systems/equipment and review of performance data against standards.
Provides training, mentoring, and assisted other engineers, technicians, and operators in the diagnostics and repair of threat systems.
Verifies and complies with engineering documentation standards and test procedures.
Supports development of technical proposals and provides comments on the technical content and level of effort of the proposed scope of work.
Develops, maintains, and produces technical documentation and system/subsystem specifications.
Conducts site visits and experimental investigations and analyzes engineering problems, proposes solutions and alternatives, and provides recommendations.
Creates technical proposals, requirements definitions, test plans and other technical documentation following JT4's systems engineering processes and procedures.
Research and analyze data such as customer design proposals, specifications and manuals to determine the feasibility of a design or application.
Devise appropriate tests to evaluate, debug and check systems.
Document the results of complex analysis and design tasks.
Collaborate with Air Force customers to obtain requirements, develops system requirements documents, acquisition and vendor statement of work documents, evaluation tests, and summary reports.
Performs other position-related duties and assignments as directed.
DESIRED QUALIFICATIONS AND EXPERIENCE Four (4) years of applicable RF / Threat (electronic warfare systems) engineering preferred.
Comprehensive knowledge of electronic warfare (EW) policy, doctrine, practices and capabilities combined with a thorough understanding of the analytical, evaluative, and administrative methods required for integration, development, and acquisition of training systems Mastery of IO-related systems analysis and design to serve as technical authority on a wide range of technology and applications.
Must have knowledge of emerging technology to apply new solutions to requirements and to plan advanced projects.
Ability to develop new approaches, establish innovative techniques, and identify measurement and evaluation criteria to determine program effectiveness, develop new or modified work methods, and analyze and resolve highly complex problems.
Ability to apply the principles and techniques of electrical engineering design to specific projects.
Ability to manage engineering projects efficiently and effectively.
Ability to provide technical direction to other engineers, technicians and support personnel.
Write and prepare a variety of technical reports, manuals and other types of written communications.
Ability to analyze data, resolve problems and make decisions independently.
DoD experience is required.
Required to qualify for and maintain a government security clearance and must have a valid, current state driver's license.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience, or an accredited Master of Science in Engineering with at least 2 years of related engineering experience, or have an accredited doctoral degree in Engineering.
Mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
Working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
Excellent communication and analytical skills.
Planning/organizational skills and the ability to work under deadlines.
SALARY The expected salary range for this position is $91,000 to $130,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Duties are performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, indoors or outdoors, may be required.
Government vehicle is used on an as-needed basis.
Grease or oil may be found on working surfaces.
Ability to work in a field environment with some shift work, at remote locations with overnight assignments.
There is occasional lifting to 40 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A2NTTR
WHO WE ARE
Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.
WHO WE NEED
We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor's Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.
The primary duties associated with this position include:
- The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
- Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
- Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
- Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
- Write and review related reports for the services provided.
- Scoping projects and assisting project managers with proposal creation.
- Serving as a Quality Control reviewer for the designs of team members.
- Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
- Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
- Attending client meetings/presentations in the daytime or evenings.
- Communicating with client representatives, contractors, and suppliers.
- Participating in site visits/inspections/documentation during construction.
- Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
- This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.
Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.
Delta is driven to exceed our clients' expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.
WHAT WE OFFER
Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)
The following are a few of the benefits that we offer:
- Paid Holidays, Vacation, Sick time
- Health and Dental Insurance
- Optional Vision, LTD and Term Life Insurance
- Enhanced Short Term Disability
- 401K Retirement Plan
- Tuition Assistance Program
- Professional Licensing Reimbursement
- Recruitment Bonus Program
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Remote working/work at home options are available for this role.
Our biotech client is seeking a Communications Project Manager to support Corporate Communications and R&D Communications in a part-time freelance capacity.
This is an ongoing 20 hours/week role with an expected duration of 6 months, with potential to extend. This position is fully remote and you will be reporting directly to the VP, Enterprise Communications.
The Communications Project Manager will serve as an operational and organizational engine for two fast-moving communications teams. This role ensures projects progress on schedule, leadership receives accurate and timely reporting, and executive-ready materials are consistently delivered. The ideal candidate is proactive, highly organized, experienced in cross-functional communications, and comfortable working directly with senior leaders.
Responsibilities
- Compile weekly project updates for the VP to support executive staff meeting discussions.
- Prepare and maintain monthly team reports for Corporate Communications and R&D Communications.
- Build quarterly business reviews (QBRs), consolidating inputs from multiple workstreams into executive-ready presentations.
- Create and update executive briefing books (1-2 per week), synthesizing complex information into clear, strategic narratives.
- Attend weekly team meetings (Wednesdays at 10 AM PST and Thursdays at 11 AM PST), maintaining agendas, tracking follow-ups, and ensuring all commitments are completed.
- Coordinate project inputs across cross-functional partners; track progress, identify risks, and flag blockers.
- Gather updates from stakeholders and ensure completeness, clarity, and alignment to team priorities.
- Synthesize themes across projects to identify patterns, insights, and strategic throughlines for reporting.
- Prepare materials in polished, executive-ready formats.
- Maintain project trackers, shared documents, and operational workflows across Airtable, OneNote, and Teams.
- Support the operational organization of both communications teams as they undergo structural changes, helping maintain consistency, accountability, and predictable information flow.
Requirements
- Minimum of 3 years of experience in project management, communications, executive support, or similar roles
- Experience supporting executive communications or communications teams.
- Strong organizational skills with demonstrated success managing multiple deadlines and stakeholder inputs.
- Proactive, self-starting working style with a Type A attention to detail.
- Exceptional written communication skills and comfort preparing executive-level materials.
- Ability to confidently engage senior leaders to request updates, clarify details, and push for high quality inputs.
- Comfortable synthesizing information and identifying key themes, insights, and priorities.
- Strong collaboration skills and a personable, professional presence.
Software Required:
- Airtable
- Workfront
- PowerPoint
- OneNote
In this position, you may have access to client or customer systems, confidential and/or proprietary information or data, including medical data.
Benefits
Creative Circle's Freelance Employee benefits package includes eligibility for Minimum Essential Coverage (MEC) medical plan, dental/vision/term life package, discount prescription program, critical illness, accident, tele-behavioral health, and 401(k) plan. Sick leave is provided to Candidates whose assignment work location is in a state or city subject to sick leave laws. A Minimum Value (MV) PPO medical plan, Employee Stock Purchase Plan, and paid holiday eligibility are based on length and dates of service.Email Your Resume In Word To
Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply.
Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : AG24-1980766 -- in the email subject line for your application to be considered.
Allie Gribble - Senior Solutions Delivery Recruiter
For Creative Circle to represent you for this opportunity, you must be currently authorized to work in the United States without the need of employer sponsorship for a non-immigrant visa such as a H-1B, TN, or O visa. We do not support or provide training for STEM/OPT programs. Additionally, you must be physically located in and perform the work for our client in the United is a new role.
This job was first posted by Creative Circle on 03/16/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.
This job was posted on 03/16/2026 and is open for 60 days
Creative Circle is an Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, disability, status as a crime victim, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Creative Circle will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. If you need a reasonable accommodation in the application process, please contact your Recruiter (the person you'll be interviewing with) or a member of our Human Resources team to make arrangements. United Healthcare creates and publishes the Transparency in Coverage Machine-Readable Files on behalf of Creative Circle.
Copyright 1999 - 2026. CreativeCircle , Inc. All rights reserved.
Remote working/work at home options are available for this role.
Job Title: Director of Analytics & Insights (Amazon Agency)
Location: Milwaukee, WI
Alternate location: Or home based anywhere in the US
Industry: Ecommerce (Amazon Agency)
Channel: Mostly Amazon and
Direct Reports: Team of 5-6 Analysts
Visa: No sponsorship possible. Must have valid work authorization
Job ID: ZR_9557_JOB
Remote work policy: Full remote
Job Seniority: Executive Level, Middle Management Level
Company size: Medium (50-1000 ppl)
Company Ownership: Privately Owned
Industry(ies): Ecommerce, Consumer Goods,
Function(s): eCommerce,
Region(s): Arizona, Atlanta, Boston, Chicago, Cincinnati, Las Vegas, Los Angeles Area, New Orleans, NORTH AMERICA, USA, Dallas, California, Fort Lauderdale / West Palm Beach, Houston, Colorado, Connecticut, San Francisco Area, Florida, Miami, Georgia, Illinois, Louisiana, Massachusetts, Michigan, Minnesota, Nevada, New Jersey, New York City area, North Carolina, Ohio, Pennsylvania, Texas, Utah, Washington DC, Maryland, Delaware, Washington
Company Description
Our client is a well-established ecommerce services organization that supports brands in building and scaling their presence across major online marketplaces (Amazon and mostly). With a long-standing track record in digital commerce, the firm provides strategic and operational support spanning retail, media, creative and performance enablement. Its environment is collaborative, entrepreneurial and data-driven, with a strong emphasis on translating complexity into clear business value.
Objective of the Role
Our client is seeking a Director of Analytics & Insights to lead the strategic development of its measurement and insights capability. This individual will define how performance is measured, interpreted and communicated across client engagements, with a particular focus on ecommerce, digital advertising effectiveness and broader brand growth.
The role is designed for a senior leader who can combine technical depth with business judgment. The successful candidate will establish a clear vision for analytics and reporting, strengthen the quality of insight generation across the organization, and help create scalable frameworks that enable client teams to translate data into action. This position will also play an important role in shaping how advanced tools, automation and artificial intelligence support a modern analytics function.
Ideal Profile
The ideal candidate will bring a strong background in ecommerce analytics, digital advertising measurement and commercial insight generation, ideally gained within a brand-led environment, an agency, or a similarly complex client-facing business. A deep understanding of marketplace ecosystems is essential, particularly in relation to Amazon advertising, Amazon Marketing Cloud, omnichannel measurement and upper-funnel media effectiveness.
This person should be equally credible in technical and executive settings: capable of engaging with analysts, data partners and technical teams while also presenting clear, actionable conclusions to senior leadership. The right profile will combine strategic thinking, intellectual curiosity, sound judgment and the ability to bring structure to an evolving function.
Responsibilities
- Define and advance the analytics and insights vision for the organization.
- Establish scalable measurement frameworks covering retail performance, advertising effectiveness, brand growth and operational health.
- Lead and develop the analytics team, strengthening capabilities, role clarity and professional growth.
- Create clear standards for reporting, dashboards and insight delivery across client accounts.
- Improve the quality of interpretation by ensuring data is translated into commercial recommendations and action plans.
- Serve as a subject matter expert on advanced ecommerce measurement, including Amazon Marketing Cloud and omnichannel analytics.
- Partner with internal technology and engineering teams to improve data infrastructure, automation and reporting efficiency.
- Evaluate the current operating model and clarify ownership between analytics, reporting and client-facing teams.
- Support the development of advanced analyses that go beyond standard dashboard reporting and provide deeper strategic value.
- Ensure analytical output remains relevant, accurate, decision-oriented and aligned with the evolving needs of clients and the business.
Requirements
- Significant experience in analytics and insights leadership, including team management.
- Strong expertise in digital advertising measurement and ecommerce performance analysis.
- Demonstrated knowledge of Amazon advertising tools, metrics and measurement methodologies, including Amazon Marketing Cloud.
- Familiarity with omnichannel measurement, customer journey analysis and upper-funnel media evaluation.
- Advanced capability in SQL and experience with business intelligence and visualization platforms such as Tableau, Looker or similar tools.
- Working knowledge of statistical or analytical tools such as Python, R or equivalent.
- Ability to design measurement frameworks that connect media investment to broader business outcomes.
- Strong communication skills, with the ability to simplify complex analysis for non-technical audiences.
- Experience operating in a fast-paced, evolving environment with multiple stakeholders.
- Bachelor's degree required; an advanced degree is advantageous.
Remote working/work at home options are available for this role.
IDR is hiring for a 6 Month Contract to Hire Technical Product Owner
Join a leading organization in the data technology sector, where innovation and agility drive success. This fully remote role offers the opportunity to influence key data engineering initiatives, collaborating across diverse teams to deliver impactful digital products. If you're passionate about data solutions, thrive in fast-paced environments, and possess a strong technical acumen, this is your chance to make a difference and grow your career.
Position Overview for the Technical Product Owner:
• Act as a pivotal link between Data Engineering teams and business stakeholders to facilitate successful technology delivery across digital products
• Manage and prioritize data engineering product backlog, ensuring alignment with organizational objectives
• Author user stories and acceptance criteria, leading refinement sessions and sprint planning
• Lead Agile ceremonies including daily standups, sprint reviews, and retrospectives to ensure smooth delivery
• Utilize data and AI tools to analyze issues, optimize workflows, and maintain high quality in product artifacts
Requirements for the Technical Product Owner:
• Proven experience in stakeholder interaction and managing product backlogs in an Agile environment
• Strong documentation skills and the ability to communicate complex technical requirements effectively
• Proficiency with SQL, data engineering processes, and related technologies such as Azure SQL, Data Factory, SSIS, and Azure Data Lake
• Familiarity with Microsoft tech stack and data delivery tools is highly preferred
• Solid understanding of data engineering concepts and successful delivery of technical products
What's in it for you?
• Opportunity to work remotely with flexible hours, supporting a dynamic team that values innovation and autonomy
• Competitive pay rate of $60-68/hr, leading to an annualized salary of approximately $135,000 + 10% STIP
• Be part of a company with a strong focus on data-driven solutions and cutting-edge technology adoption
• Gain hands-on experience with AI-driven processes and advanced data engineering tools
Why IDR?
• 25+ Years of Proven Industry Experience in 4 major markets
• Employee Stock Ownership Program
• Dedicated Engagement Manager who is committed to you and your success
• Medical, Dental, Vision, and Life Insurance
• ClearlyRated's Best of Staffing Client and Talent Award winner 12 years in a row.
REMOTE
Remote working/work at home options are available for this role.
Applied AI Engineer
Compensation:
- Up to $150,000 base salary (direct hire w2 only, no c2c, no 1099), (flexibility on base salary for exceptional experience)
Location:
- Hybrid / Onsite - Greater Kansas City Metro Area
- 3 days per week onsite, 2 days remote
- Candidates must currently reside in the KC metro area or be willing to relocate within a reasonable timeframe
- Fully remote candidates cannot be considered
Work Authorization:
- Must be authorized to work in the U.S.
- No current or future visa sponsorship available
Engagement Type:
- Full time, direct hire only
- No third-party agencies, consulting firms, C2C, or 1099 arrangements
About the Opportunity
Vaco Highspring is conducting a confidential search on behalf of a global enterprise organization with a strong technology footprint, including a proprietary SaaS platform and a technology?enabled services business.
The organization is making a focused investment in artificial intelligence to improve internal efficiency, modernize workflows, and embed intelligent capabilities into its software platform. This role offers meaningful ownership and visibility, with a mandate to build and deploy AI systems that have real, production level impact.
The Role
As an Applied AI Engineer, you will play a key role in integrating AI across internal systems and a customer facing SaaS platform. You will work hands on with large language models (LLMs) and modern AI tooling to automate processes, build internal tools, and deliver intelligent product features.
This is a production focused role operating at the intersection of engineering, product, and business operations, with close collaboration across teams in a hybrid/onsite environment. (3-days per week onsite in Greater Kansas City Metro Area, 2-days remote work.)
Key Responsibilities
- Design and build scalable AI powered services and tools to streamline internal workflows across multiple teams (e.g., operations, content, sales, support).
- Develop and deliver intelligent features within a proprietary SaaS platform.
- Integrate, manage, and optimize multiple LLMs and AI APIs (e.g., OpenAI style, Anthropic style, or comparable providers).
- Provide technical leadership and mentorship to other engineers, including guidance on architecture, best practices, and performance.
- Build and maintain backend systems and APIs that support AI functionality across products and services.
- Design infrastructure for model serving, orchestration, monitoring, and lifecycle management.
- Implement fallback strategies, model routing, and cost performance optimization.
- Partner cross functionally with engineering, product, and business stakeholders to identify high impact AI opportunities.
- Apply best practices related to data privacy, security, compliance, and responsible AI use.
- Stay current with advancements in AI, LLMs, and MLOps, introducing new approaches where appropriate.
Qualifications
- 6+ years of engineering experience with multiple years of experience in a production environment deploying AI/ML applications or infrastructure.
- Proven experience applying LLMs or similar AI models to real business or product challenges.
- Strong backend engineering skills (Python and/or TypeScript preferred).
- Experience with AI/ML orchestration and deployment tools (e.g., LangGraph style frameworks, Airflow like systems, Kubeflow, Ray, or workflow automation tools).
- Hands on experience with cloud platforms (AWS, GCP, or Azure) and containerization (Docker, Kubernetes).
- Front end development experience in areas like React, Node.js, Web Development, front end web product design
- Solid understanding of MLOps practices, including deployment, monitoring, logging, and evaluation.
- Knowledge of data privacy, security, and ethical AI considerations.
- Experience supporting SaaS platforms or technology driven products is a plus.
- Strong communication skills and the ability to collaborate across technical and non-technical teams.
- Passion for applying AI in practical, high impact ways.
Why This Role
- High visibility and ownership of AI initiatives
- Opportunity to build AI systems that directly impact business outcomes
- Emphasis on production grade systems, not experimentation alone
- Collaborative, hybrid environment with close access to stakeholders
Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual's skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs. With that said, as required by local law in geographies that require salary range disclosure, Vaco/Highspring notes the salary range for the role is noted in this job posting. The individual may also be eligible for discretionary bonuses, and can participate in medical, dental, and vision benefits as well as the company's 401(k) retirement plan. Additional disclaimer: Unless otherwise noted in the job description, the position Vaco/Highspring is filing for is occupied. Please note, however, that Vaco/Highspring is regularly asked to provide talent to other organizations. By submitting to this position, you are agreeing to be included in our talent pool for future hiring for similarly qualified positions. Submissions to this position are subject to the use of AI to perform preliminary candidate screenings, focused on ensuring minimum job requirements noted in the position are satisfied. Further assessment of candidates beyond this initial phase within Vaco/Highspring will be otherwise assessed by recruiters and hiring managers. Vaco/Highspring does not have knowledge of the tools used by its clients in making final hiring decisions and cannot opine on their use of AI products.
Remote working/work at home options are available for this role.
