Engineering Jobs in Minnesota

• Conduct routine sampling/testing following PMO Chapter 7 and company requirements.
• Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
• Maintain accurate logs for raw, treated, and post-treatment water.
• Conduct trend analysis to identify areas with continuous improvement opportunity.

• Monitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
• Manage water inventory through planning and predicting production of potable water and purchase of city water.
• Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
• Participate in maintenance planning and troubleshooting of water system components.
• Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
• CIP rinse and final rinse water.
• Direct-contact water used in equipment, valves, and product pathways.
• Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
• Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
• Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.

• Ensure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
• Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
• Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
• Lead water-related corrective action investigations and preventive action documentation.

• Maintain water sampling schedules, test results, calibration records, and system maintenance documentation.
• Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
• Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
• Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.

• Train CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
• Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
• Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.

• Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
• 2+ years in dairy manufacturing, water treatment, or environmental monitoring.
• Understanding of CIP systems, dairy sanitation, and hygienic design principles.
• Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
• Experience with microbial testing, water analysis equipment, and trend evaluation.

• Bilingual in English/Spanish.
• HACCP and/or Preventive Controls Qualified Individual certification.
• Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
• Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.

• Conduct routine sampling/testing following PMO Chapter 7 and company requirements.
• Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
• Maintain accurate logs for raw, treated, and post-treatment water.
• Conduct trend analysis to identify areas with continuous improvement opportunity.

• Monitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
• Manage water inventory through planning and predicting production of potable water and purchase of city water.
• Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
• Participate in maintenance planning and troubleshooting of water system components.
• Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
• CIP rinse and final rinse water.
• Direct-contact water used in equipment, valves, and product pathways.
• Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
• Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
• Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.

• Ensure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
• Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
• Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
• Lead water-related corrective action investigations and preventive action documentation.

• Maintain water sampling schedules, test results, calibration records, and system maintenance documentation.
• Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
• Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
• Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.

• Train CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
• Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
• Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.

• Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
• 2+ years in dairy manufacturing, water treatment, or environmental monitoring.
• Understanding of CIP systems, dairy sanitation, and hygienic design principles.
• Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
• Experience with microbial testing, water analysis equipment, and trend evaluation.

• Bilingual in English/Spanish.
• HACCP and/or Preventive Controls Qualified Individual certification.
• Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
• Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.

• Conduct routine sampling/testing following PMO Chapter 7 and company requirements.
• Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
• Maintain accurate logs for raw, treated, and post-treatment water.
• Conduct trend analysis to identify areas with continuous improvement opportunity.

• Monitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
• Manage water inventory through planning and predicting production of potable water and purchase of city water.
• Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
• Participate in maintenance planning and troubleshooting of water system components.
• Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
• CIP rinse and final rinse water.
• Direct-contact water used in equipment, valves, and product pathways.
• Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
• Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
• Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.

• Ensure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
• Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
• Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
• Lead water-related corrective action investigations and preventive action documentation.

• Maintain water sampling schedules, test results, calibration records, and system maintenance documentation.
• Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
• Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
• Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.

• Train CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
• Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
• Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.

• Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
• 2+ years in dairy manufacturing, water treatment, or environmental monitoring.
• Understanding of CIP systems, dairy sanitation, and hygienic design principles.
• Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
• Experience with microbial testing, water analysis equipment, and trend evaluation.

• Bilingual in English/Spanish.
• HACCP and/or Preventive Controls Qualified Individual certification.
• Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
• Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.

Vantive is a vital organ therapy company on a mission to extend lives and expand possibilities for patients and care teams everywhere. For 70 years, our team has driven meaningful innovations in kidney care. As we build on our legacy, we are deepening our commitment to elevating the dialysis experience through digital solutions and advanced services, while looking beyond kidney care and investing in transforming vital organ therapies. Greater flexibility and efficiency in therapy administration for care teams, and longer, fuller lives for patients— that is what Vantive aspires to deliver.

We believe Vantive will not only build our leadership in the kidney care space, it will also offer meaningful work to those who join us. At Vantive, you will become part of a community of people who are focused, courageous and don’t settle for the mediocre. Each of us is driven to help improve patients’ lives worldwide. Join us in advancing our mission to extend lives and expand possibilities.

Your Role:
The Senior Quality Engineer is responsible for supporting and sustaining Medical Device Quality Technology and Engineering activities related to design control and post-market product support for therapeutics products. 

What you'll be doing:

• Prepare and manage the internal audit schedule for Vantive Twin Cities

• Assist in performing internal audits for the Medical Device R&D organizations as well as Drug Product R&D organizations

• Prepare internal communications related to the audit including final reports.

• Perform and host internal audits in conjunction with the Quality Manager

• Ensure site compliance with local and global Quality Management System Procedures.

• Perform quality-related functions for post market activities such as Nonconformance Investigation and Corrective and Preventive Action (CAPA) Management.

• Consult with site personnel as QMS Subject Matter Expert to advise on QMS requirements.

• Assist in preparing and hosting external audits with regulatory authorities.

• Review and approve design inputs, outputs, verifications, validations, and design transfers in accordance with QMS requirements.

• Assist in decision making for process and product improvement efforts.

• Write, review, analyze and revise Local QMS documentation.

What you'll bring:

• Bachelor's Degree in related field and 3+ years of relevant experience in the medical device industry or similarly regulated industry. Or substitute 7 years of relevant experience in the medical device industry or similarly regulated industry.

• Minimum 2 years of experience performing internal or external audit activities.

• Demonstrate understanding in the areas of Quality Engineering and worldwide Quality System standards and regulations.

• Ability to work under deadlines and changing priorities with minimal supervision.

• Must be a team player with excellent verbal and written communication skills to work cross-functionally in a highly matrixed organizational environment.

• Strong analytical and problem-solving skills 

• Demonstrated ability to perform within project and investigational environments.

Nice to have:

• B.S. in Engineering or Science Discipline

• Formal Audit training or certification

• American Society for Quality Certification (e.g., CQE, CQA, etc.) and/or Six Sigma certification highly preferred.

• Demonstrated assertiveness and ability to represent the Quality function in various roles in support of R&D engineering activities including product support and lifecycle management. 

• Experience / understanding of Risk Management techniques and principles.

Vantive is committed to supporting the need for flexibility in the workplace. We do so through our flexible workplace policy which includes a minimum of 3 days a week onsite. This policy provides the benefits of connecting and collaborating in-person in support of our Mission.

We understand compensation is an important factor as you consider the next step in your career. At Vantive, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $80,000 to $100,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. This position may also be eligible for discretionary bonuses. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview.

#LI-BT1

US Benefits at Vantive

This is where your well-being matters. Vantive offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical, dental and vision coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Aon Pooled Employer Plan (“Aon PEP”), Vantive’s 401(k) retirement savings plan, to help you prepare for your future.  The Aon PEP is designed to help improve retirement outcomes by providing retirement resources more efficiently.  The plan offers a robust set of investment options, financial education, and a suite of resources to support your retirement goals.

We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Vantive’s US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Vantive

Equal Employment Opportunity

Vantive is an equal opportunity employer. Vantive evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic.
                                                                                                                                                               
Know Your Rights: Workplace Discrimination is Illegal

Reasonable Accommodation

Vantive is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Form Link

Recruitment Fraud Notice

Vantive has discovered incidents of employment scams, where fraudulent parties pose as Vantive employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

Build an Aviation Career You're Proud Of

Your work ties us all together, helping our teams' function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.

Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.

As an Aircraft Engine Mechanic, you'll maintain, repair, and overhaul aircraft engines, modules, components and accessories to assure compliance with established company standards, contractual obligations and airworthiness regulatory requirements. Performs technical troubleshooting using mechanical ability and extensive product knowledge. Cross train in other complementary skills as needed to support production requirements.

What You'll Do:

Follow all required standards in the performance of assigned work displaying appropriate competencies in accordance with FAA Regulations, OEM manuals, and related materials. Incumbent is required to meet all training requirements set out in a separate, but specific Training Matrices chart for each job. Duties include but not limited to the following:

• Conducts necessary troubleshooting and/or repair (either on or off wing) on turbine engines.
• Disassembly and assembly of various models of turbine engines according to sequence utilizing aircraft tools, balance machines, surface grinders, drill presses, and other equipment for repair and/or overhaul.
• Receives engine parts to conduct inspections using precision measuring tools in order to detect physical defects such as cracks, burns, foreign object damages, proper screws and structure deviations.
• Evaluates engine parts to determine which parts are repairable or unrepairable; refers to micrometers and other precision-measurement tests to determine further routing to other destinations or to scrap parts.
• Inspect aircraft engine parts to determine and/or perform NDT requirements.
• Utilizes applicable database system in order to retrieve information regarding parts inventory, manufacturing models, serial numbers, and/or other pertinent information to ensure proper documentation.
• Refers to technical publications, specification sheets and/or other regulatory requirements in order to ensure that all tasks have been completed in proper sequence and required signed-off.
• Customer contact and travel (up to 25% of the time) may be required.
• General facility cleaning and maintenance.

Position Requirements:

• High School diploma or GED.
• 1 - 5 years or more experience in gas turbine engine/components maintenance and repair.
• FAA Airframe and Power Plant license required or must be acquired within 1 year of job award.
• Previous engine maintenance experience in the aerospace field on turbine engines.

Preferred Characteristics:

• Engine maintenance experience on Honeywell, Rolls Royce and/or Pratt and Whitney experience preferred.
• Computer literacy skills are required.
• Must be able to read, interpret and understand technical manuals, work specifications and written work instructions, ability to read micrometers and other precision-measuring instruments.
• Ability to express or exchange ideas verbally with pers, clients, and public.
• Ability to get along with co-workers and peers.
• Maintenance of regular attendance and punctuality with customary tolerance.
• Must be authorized to work in the U.S.

Benefits That Make Life Better:

• Comprehensive Healthcare
• 401(k) with 100% company match; up to 5% vested
• Paid Time Off starting on day one
• Bonus opportunities
• Health- & Dependent Care Flexible Spending Accounts
• Short- & Long-Term Disability
• Life & AD&D Insurance
• Learning & Training opportunities

• Design and manage automation projects from start to finish—think PLC programming, HMI screens, and system start-ups.
• Keep our automated systems running safely and smoothly.
• Troubleshoot and improve systems like PLCs, HMIs, SCADA, and robotics.
• Work closely with production, maintenance, and quality teams to make processes better.
• Make sure everything meets food safety and regulatory standards.
• Train and support automation technicians.
• Stay up to date on the latest automation trends and technologies.

• Degree in Electrical Engineering, Mechatronics, Automation —or equivalent experience.
• Hands-on experience with PLC programming (Allen-Bradley/Rockwell), HMI development, and SCADA systems.
• Strong problem-solving skills and attention to detail.
• Knowledge of food safety standards and hygienic design is a plus.
• Bonus points for experience with robotics, vision systems, or automated packaging lines.

• Competitive pay and great benefits.
• Opportunities to learn, grow, and make an impact.
• A supportive team that values innovation and collaboration.
• Work for a company that's been a leader in dairy for decades.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Test Architect to support the NASAMS® surface to air defense system programs. The Test Architect (TA) will be accountable for architecting a technically sound approach for the Test and Evaluation (T&E) strategy for the entire lifecycle of the product along with influencing the prime item architecture to support that strategy.

 

What You Will Do

• Responsible for test strategy for all aspects of the program and defines metrics to gauge progress.

• Responsible for defining or optimizing test environments and requirements to ensure on-time deliveries.

• Responsible for interface and coordination with internal and external organizations on test strategy, coordination, execution, and reporting activities.

• Extensive interaction with Program Managers, Directorate Leads, Chief Engineers, and technical subject matter experts (SMEs).

• Coordinate with other program disciplines to draw on their SMEs to address emergent issues across the systems, software, and hardware domains.

• Represent the interests of the Systems Integration and Test (SI&T) discipline on the program.

• Interface with the customer community on a regular basis to share test status, issues, and address programmatic concerns.

• Knowledge base for Model Based Systems Engineering and how to use this in Integration and Test for test strategy.

• International travel up to 20%, Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience with formal system test activities, including ground tests, flight tests, system verification, and system integration check out events

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer

• Excellent technical writing and formal presentation experience

• Strong proven communication skills

• Raytheon Test Architect Certification

• Experience with Department of War or similar major programs throughout the product lifecycle

• Active and transferable U.S. government issued security clearance is required prior to start date.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists for a Sr. Principal RF Module Design/Development Engineer to join our Module Development Section with the Advanced Microelectronics Solutions (AMS) Department as a technical lead. The AMS department designs, fabricates, and tests state-of-the-art Monolithic Microwave Integrated Circuits (MMICs) in our on-site foundry. These chips are designed into custom modules to support multiple programs and enhance the capabilities of next generation radar systems.

The successful candidate will be responsible for leading the technical design and development of RF/microwave modules containing GaAs- and GaN-based monolithic microwave integrated circuit (MMIC) products. This would be in active support of existing technologies in production as well as next generation products in development. This position requires a strong academic background and experience in RF/Microwave Design, Development, Integration & Test.

What You Will Do:

• Designing RF structures and transitions on multi-layer, multi-channel RF Modules and analog circuitry enabling both receive and transmit behavior

• Consulting across RF module design, MMIC design and assembly teams

• Troubleshooting RF Modules that are prototyped and under development

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in a Science, Technology, Engineering & Math (STEM) Field and Ten (10) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with Microwave/RF module, subsystem and component analysis, design, and test

• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master’s degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field 

• Experience leading teams and/or projects

• Experience in module/sub-system assembly & packaging process

• Experience in thermal modeling and analysis.

• Experience of different topology trade-offs, process and active/passive component selection, system/sub-system level, gain-loss analysis and flowing down requirements from the system to the component level

• Hands-on experience with electromagnetic simulation tools such as HFSS, ADS, CST.

• Layout experience in Mentor Graphics’ Xpedition, Cadence Virtuoso or AutoCAD

• Experience with analytical tools such as Matlab, Python, or JMP

• Experience in cost estimating, budget and schedule management

• Understanding of allocating and flowing down requirements from the system to the component level

• Experience in a production environment

• Experience with microwave testing techniques, including using spectrum analyzers, Real-time Spectrum Analyzers (RSAs), Vector Network Analyzers (VNAs) and Performance Network Analyzer (PNAs)

• Experience with GaAs and/or GaN MMIC devices

• Current DoD Secret level security clearance

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Systems Engineering and Test Capabilities (SE&TC) is seeking a Section Leader for the System Integration and Test (SI&T) Integrated Systems Department. This department supports multiple programs including Patriot and NASAMS Systems. As a Section Leader, the candidate will be expected to actively participate in Department level leadership team goals and initiatives, support department hiring and program staffing, provide employee feedback and mentoring, and be actively involved in daily program operations. This position provides an opportunity to grow your skillsets by contributing to the development of our workforce and creating and fostering a collaborative environment.

What You Will Do

• Lead a cross functional team of engineers

• Establish meaningful and measurable goals and communicate effectively with the team

• Oversee the direct line management activities for the section including communication, performance impact, career development, and talent acquisition

• Support department and discipline level initiatives

• Ensure employee compliance with company policies and procedures

• Oversight of personnel issue resolution

• Adhere to and ensure alignment to Raytheon Technologies Values and Behaviors

• Work as a technical lead or individual contributor; Section Leader duties account for approximately 10% of the employee’s time.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience in system, software, and/or test.

Qualifications We Prefer

• Strong communication and interpersonal skills

• Experience with team leadership

• Experience with the Earned Value Management System (EVMS) or similar budget tracking system

• Experience with Raytheon’s Proposal Capture Process (development of Basis of Estimates, etc)

• Experience with the Estimate at Complete (EAC) process

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory. The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have

• Requires a Bachelors degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Senior Systems Engineer to support integration and test activities for NASAMS (surface to air defense system) programs. In this role you will collaborate internally across functions and externally with our industry partners and U.S. Government customers to plan, prepare and execute Product Acceptance Testing and System Demonstration of the NASAMS Fire Unit. This position reports into the overall NASAMS SI&T Cross Product Team Lead.

What You Will Do:

• Support the test architect in the integration and test strategy development and implementation to include metric collection and tracking.

• Support the development and review of test plans and test procedures.

• Support the planning, preparations, and conduct and product acceptance, system demonstration, and System Integration and Checkout (SICO) events.

• Identify and coordinate resources required for execution of demonstration and test events.

• Responsible for providing technical assistance to the program SI&T CPT lead to include development of technical briefings for program and engineering leadership.

• International travel up to 20%. Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics. (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with the systems, software, operation, integration, and/or test.

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer :

• Experience with DOORS

• Experience with the integration and test of Air Defense Systems

• Experience with creating test scripts, and/or conducting performance analysis.

• Experience with Microsoft applications.

• Effective written and verbal communication, customer focus, collaboration, and multitasking skills.

• Active and transferable U.S. government issued security clearance.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists for an experienced Principal MMIC and Module Design Engineer to join Raytheon’s RF Microelectronics/Module Design & Foundry Services department in Andover, MA. This department develops, designs, and manufactures compound semiconductor devices, microwave/millimeter-wave integrated circuits, and modules for defense applications. The successful candidate will develop state-of-the-art MMIC and module products that support air and missile defense systems and radars. Using advanced semiconductor and module technologies, they will be responsible for the complete product cycle of the MMIC, including concept, design, layout, test, evaluation, and interfacing with the customer.

What You Will Do:

• Develop insights that extend your knowledge in the MMIC design field and form the basis of new concepts, theories, and products
• Design RF structures and transitions on multi-layer, multi-channel RF Modules and analog circuitry enabling both receive and transmit behavior
• Consult across MMIC design, module design, test and assembly teams
• Act independently to troubleshoot, and uncover and resolve issues
• Research and develop new technology that results in new product/business opportunities for Raytheon
• Serve as a technical resource and represent the Department as a technical contact to Raytheon and external customers

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and 8+ years of relevant work experience with RF/microwave/mm-wave MMIC design, module/subsystem design and test. An advanced STEM degree can count in lieu of some experience)
• Experience with Circuit Simulation tool ADS and in EM tools such as HFSS, Momentum
• Experience designing RF/Microwave MMIC circuits and modules
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Value:

• Master’s or Doctoral Degree in Electrical Engineering or related engineering curriculum
• Broad background in theory and techniques of microwave/mm-wave circuits, design, and test
• Experience in thermal modeling and analysis.
• Experience of different topology trade-offs, process and active/passive component selection, system/sub-system level, gain-loss analysis and flowing down requirements from the system to the component level
• Layout experience in Mentor Graphics’ Xpedition, Cadence Virtuoso or AutoCAD
• Experience with analytical tools such as Matlab, Python, or JMP
• Experience with microwave testing techniques, including using spectrum analyzers, Real-time Spectrum Analyzers (RSAs), Vector Network Analyzers (VNAs) and Performance Network Analyzer (PNAs)
• Experience with GaAs and/or GaN MMIC devices
• Current DoD Secret level security clearance

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms