Engineering Jobs in Mapleton Peoria County Il Remote

Overview

As a member of the interdisciplinary team, contributes professional nursing knowledge and skills in the provision and management of care to patients through the application of the nursing process

Qualifications

License/Certifications:
Basic Life Support (BLS) within 30 days - American Heart Association (AHA); Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)

Education:
Bachelor's Degree: Nursing (Required)

Other Knowledge/Skills:
Registered Nurse
Responsibilities

CLINICAL EXCELLENCE FOCUS: Promotes the use of evidence based practice through the nursing process, protocols and procedures.

• Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes.
• Develops an individualized plan of care using a collaborative approach with the patient/family and health care team.
• Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes.
• Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift.
• Modifies plan of care based on evaluation and as needed based on changes in patient condition.
• Completes required documentation as appropriate, including patient chart and event reports.
• Demonstrates professional accountability for own practice as evidenced through seeking resources and continued self-development.
• Demonstrates technical knowledge of equipment and troubleshoots when problems arise.
• Acquires and maintains current knowledge and skills in evidence based nursing practice.
• Promotes the professional development of self and team members
• Shares clinical knowledge through informal teaching and in response to the learning needs of others.
• Demonstrates a practical problem solving approach to patient moving and handling issues (as applicable).
• Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable).
• Possesses knowledge and skills necessary to obtain adequate lab specimens for testing.
• Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies

WORK ENVIRONMENT & CULTURE FOCUS: Coordinates the interdisciplinary care of the patient through collaboration with team members and utilizes additional resources when necessary.

• Analyzes clinical situations in a systematic way and acts to obtain resources or correct problems to meet or exceed expected outcomes or patient needs.
• Recognizes need for assistance and utilizes resources, including physician and nurse to nurse (RRT) consultation in a timely manner.
• Demonstrates ownership and persistence to ensure problem is resolved in best way possible.
• Able to assume assignment of non-complex and some complex patient management with some turnover in assignment.
• Consistently prioritizes work based on changes in patient condition, changes in assignment and unanticipated interruptions.
• Identifies and utilizes team resources to solve identified problems or needs.
• Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes.
• Works with other team members in delegating tasks and activities appropriately.
• Provides goal-focused shift report.
• Advocates with physicians on patient's behalf when necessary.
• Utilizes communication and teamwork strategies aimed at promoting high team performance and achieving optimal patient outcomes and unit productivity.
• Chooses an appropriate and meaningful communication style when interacting with others: gives and accepts constructive feedback to/from peers

PATIENT EDUCATION FOCUS: Assesses and chooses teaching strategies appropriate to the patient's/family's age specific needs.

• Adapts teaching strategies based on patient's response, readiness to learn and level of comprehension.
• Takes cultural, age-specific, gender, and developmental factors into consideration when teaching patients about procedures, illness, hospital experience, etc.
• Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals.
• Consults appropriate resources within the hospital to provide specialized education.
• Utilizes SVI patient education system as a resource for patients and family members

PERFORMANCE IMPROVEMENT FOCUS: Actively participates in data collection, analysis, and problem solving and gives input on process improvements and patient satisfaction.

• Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital
• Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction
• Actively promotes and achieves customer satisfaction (patient, family, departments, physicians).
• Participates in the implementation of Performance Improvement initiatives.
• Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs.
• Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards.
• Serves on unit based councils
• Identifies practice problems on the unit
• Implements changes in own clinical practice based on literature and unit process improvement outcomes.
• Works on assigned projects, data collection, audits as assigned

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $32.81per hour - $56.43per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

Sign-on Bonus Available!

Relocation bonus available for 1yr+ experience and >50mi

To perform routine and specialized nuclear medicine procedures for patients of all ages in order to confirm or deny required treatment. To adapt procedures to obtain specific diagnostic results under the direction of a radiologist.

Qualifications

Certifications: Registered in Nuclear Medicine Technology (N) within 1 year - VariesVaries; Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA); Licensed Radiologic Technologist - Nuclear Medicine - Illinois Emergency Management Agency (IEMA)Illinois Emergency Management Agency (IEMA); Certified Nuclear Medicine Technologist (CNMT) within 1 year - Nuclear Medicine Technology Certification Board (NMTCB)Nuclear Medicine Technology Certification Board (NMTCB), Education: Certificate of Completion: Nuclear Medicine; Bachelor's Degree: Related Field; Associate's Degree: Radiologic Technology, Work Experience:
Responsibilities

Clinical Excellence/Patient Care

• Performs diagnostic Nuclear Medicine procedures in a manner that ensures an accurate and complete examination within the guidelines, policies, procedures and standards of Medical Imaging to assigned patients of all ages.
• Exhibits competency in performing diagnostic imaging and radionuclide therapy
• Completes scheduling, ordering radiopharmaceutical and patient preparation guidelines
• Performs and documents administrations of all Radiopharmaceuticals
• Maintains quality care throughout the procedure practicing radiation protection maintaining personal exposure ALARA
• Performs required equipment quality control
• Documents quality control records and images camera floods
• Follows all conditions of MMCI radioactive material license and IDNS regulations
• Completes all radiation safety documentation
• Possesses knowledge and skills necessary to obtain adequate lab specimens for testing.
• Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.

Clinical Excellence

• Maintains working knowledge of equipment and procedures in order to function in multiple areas of the department.
• Technically knowledgeable of equipment operation and performs reasonable troubleshooting
• Checks and observes equipment for general safety and appropriate operation
• Maintains clean work area, checks and stocks all supplies in their specific area and verifies pertinent accessories assigned to that room
• Knowledgeable of Hot Lab and procedures
• Receives radioactive packages; prepares doses for disposition; maintains radioactive waste for storage
• Knowledgeable of thyroid ablations and therapies
• Fulfills all documentation for IDNS requirements
• Performs Schilling's and Red Cell mass procedures
• Demonstrates a practical problem solving approach to patient moving and handling issues.
• Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment.

Building Relationships

• Performs support functions of the Nuclear Medicine/PET Department to ensure patient expectations and needs are met. Assumes personal responsibility for training fellow technologists/students and uses time, supplies and other resources productively to promote responsive and cost-effective care for our patients.
• Promptly processes films and paper work to ensure timely turn around in providing a report
• Maintains and coordinates patient flow to ensure efficient and expedient patient care by transporting to and from the department as required and working with multiple patients at one time utilizing appropriate resources to ensure safety
• Promptly and accurately enters patient information into RIS system and all other medical records to ensure efficient patient throughput
• Maintains the QA, QC and QI programs
• Shares knowledge, guides, and encourages fellow technologists/students with proper department protocol and procedures
• Displays a professional attitude in the area toward fellow technologists/students, fostering mutual respect and creating a productive learning environment

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $37.08per hour - $63.78per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

As a member of the interdisciplinary team, contributes professional nursing knowledge and skills in the provision and management of care to patients through the application of the nursing process.
Qualifications

License/Certifications:
Basic Life Support (BLS) within 30 days - American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)

Education:
College Diploma in Nursing; Nursing Diploma

Responsibilities

Promotes the use of evidence-based practice through the nursing process, protocols and procedures.Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes.Develops an individualized plan of care using a collaborative approach with the patient/family and health care team.Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes.Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift.Modifies plan of care based on evaluation and as needed based on changes in patient condition.Completes required documentation as appropriate, including patient chart and event reports.Demonstrates technical knowledge of equipment and troubleshoots when problems arise.Shares clinical knowledge through informal teaching and in response to the learning needs of others.Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.Coordinates the interdisciplinary care of the patient through collaboration with team members and utilizes additional resources when necessary.Analyzes clinical situations in a systematic way and acts to obtain resources or correct problems to meet or exceed expected outcomes or patient needs.Recognizes need for assistance and utilizes resources, including physician and nurse to nurse (UAT) consultation in a timely manner.Consistently prioritizes work based on changes in patient condition, changes in assignment and unanticipated interruptions.Identifies and utilizes team resources to solve identified problems or needs.Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes.Provides goal-focused shift report.Advocates with physicians on patient's behalf when necessary.Utilizes communication and teamwork strategies aimed at promoting high team performance and achieving optimal patient outcomes and unit productivity.Assesses and chooses teaching strategies appropriate to the patient's/family's age specific needs.Adapts teaching strategies based on patient's response, readiness to learn and level of comprehension.Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals.Consults appropriate resources within the hospital to provide specialized education.Utilizes SVI patient education system as a resource for patients and family members.Actively participates in data collection, analysis, and problem solving and gives input on process improvements and patient satisfaction.Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospitalWorks with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfactionParticipates in the implementation of Performance Improvement initiatives.Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs.Serves on unit based councils
About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $33.32per hour - $57.31per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

Sign-on Bonus Available!

Relocation bonus available for 1yr+ experience and >50mi

As a health care professional, the incumbent is responsible for, but not limited to, managing the processes involved in performing respiratory therapy, ventilator management, ECG, oxygen administration and airway management

Qualifications

Certifications:

Neonatal Resuscitation Program (NRP) within 1 year - American Academy of Pediatrics (AAP);

Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA);

Basic Life Support (BLS) within 30 days - American Heart Association (AHA);

Registered Respiratory Therapist (RRT) - National Board for Respiratory Care (NBRC);

Licensed Respiratory Care Practitioner (RCP) - Illinois Department of Financial and Professional Regulation (IDFPR)

Education:

Associate's Degree: Respiratory Therapy; Certificate of Completion: Respiratory Therapy

Work Experience: Respiratory therapy

Responsibilities

PERFORMS PATIENT CARE ACTIVITIES TO INCLUDE ALL FORMS OF RESPIRATORY THERAPY, NON-INVASIVE CARDIOLOGY, AND OTHER ASSIGNED DUTIES UTILIZING APPLICABLE POLICIES AND PROCEDURES.

• Interprets and executes physician orders
• Demonstrates the ability to individualize therapy to meet the patient's need
• Demonstrates the ability to anticipate the patient needs
• Demonstrates the ability to calculate medication dosages
• Performs patient education
• Performs all duties in an efficient and timely manner
• Notify leader of respiratory care, nursing supervisor, or unit leader of any inappropriate patient care issues
• Documents all medication and patient care errors
• Uses protective equipment appropriately
• Performs intubations and change tracheostomy tubes as assigned
• Practices good body mechanics, getting assistance as needed to protect patient and own safety
• Remains alert and responsive to all alarms/call lights
• Follows proper hand washing and infection control between patients and procedures
• Performs testing in a manner that ensures accurate results.
• Maintains a clean work area, checks and stocks supplies in their specific area.
• Performs oxygen rounds
• Responds to all pages and requests in a timely manner
• Performs home care instructions and arrange for home oxygen, nebulizer, and/or suction equipment
• Responds to emergency situations, RRT calls and codes immediately
• Remains calm and effective in emergency and/or stressful situations
• Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals
• Possesses knowledge and skills necessary to obtain adequate lab specimens for testing.
• Performs patient bedside lab testing (ABGs) and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.

PERFORMS VENTILATOR MANAGEMENT AND MAINTENANCE

• Maintains knowledgeable of all modes of ventilation and a weaning modalities
• Responds promptly to urgent needs
• Uses protective equipment appropriately
• Participates in patient rounds with physicians if assigned
• Performs ventilator checks every 2 hours and PRN
• Sets appropriate ventilator alarms within recommended parameters
• Educates students and other health professionals about ventilator functions
• Documents ventilator settings and patient information accurately
• Acts as patient advocate
• Practices appropriate patient assessment skills to evaluate patient needs
• Contacts physicians to improve patient care
• Contacts physicians concerning ventilator settings
• Collaborates with appropriate healthcare worker concerning patient care issues
• Sets-up, verifies proper function, operates, and monitors ventilators, BIPAP and CPAP

MAINTAINS ACCURATE DOCUMENTATION AND ACCURATE COMPUTER ENTRY

• Completes documentation of all therapy, ventilator, and oxygen
• Completes documentation on all internal forms
• Documents complete and accurate charge entry daily
• Completes accurate information on all ECGs
• Performs editing of ECGs accurately when assigned
• Documents on all diagnostic tests

ASSUMES RESPONSIBILITY FOR HIS/HER ONGOING PROFESSIONAL GROWTH AND DEVELOPMENT

• Learns the functions of all new equipment
• Learns new procedures
• Knowledgeable of departmental policies and procedures
• Completes all mandatory education within the stated timeframe
• Attends educational offerings to validate skills
• Maintain current knowledge of all equipment
• Maintain current license
• Maintain current credentials
• Acts as a resource person for others
• Participates in clinical instruction of students and other healthcare workers

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $29.78per hour - $51.22per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

As a member of the interdisciplinary team, contributes professional nursing knowledge and skills in the provision and management of care to patients through the application of the nursing process.
Qualifications

License/Certifications:
Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR); Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA); Basic Life Support (BLS) within 30 days of hire - American Heart Association (AHA)

Education:
College Diploma in Nursing

Other Knowledge/Skills:

Responsibilities

• Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes.
• Develops an individualized plan of care using a collaborative approach with the patient/family and health care team. Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes. Modifies plan of care based on evaluation and as needed based on changes in patient condition.
• Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift.
• Completes required documentation as appropriate, including patient chart and event reports.
• Acquires and maintains current knowledge and skills in evidence-based nursing practice.
• Shares clinical knowledge through informal teaching and in response to the learning needs of others.
• Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable).
• Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.
• Analyzes clinical situations in a systematic way and acts to obtain resources or correct problems to meet or exceed expected outcomes or patient needs.
• Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes.
• Takes cultural, age-specific, gender, and developmental factors into consideration when teaching patients about procedures, illness, hospital experience, etc.
• Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals.
• Actively promotes and achieves customer satisfaction (patient, family, departments, and physicians).

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $32.81per hour - $56.43per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

Sign-on Bonus Available!

Relocation bonus available for 1yr+ experience and >50mi

The Medical Physicist is responsible for performing all medical physics tasks necessary for the safe and accurate delivery of therapeutic ionizing radiation in collaboration with the radiation oncologists and staff of Carle Health– Methodist. The Medical Physicist will be responsible for maintaining state and federal regulatory requirements specific to the practice of radiation therapy at Carle Health– Methodist. Creates and monitors clinical quality indicators and collaborates with physicians to ensure appropriate treatment guidelines are utilized and/or developed and monitored.

Willing to consider partial remote if within driving distance of Peoria.

Qualifications

Certifications: Certified Specialist in Therapeutic Radiology Physics - American Board of Radiology (ABR);

Licensed Radiologic Technologist - Radiation Therapy - Illinois Emergency Management Agency (IEMA),

Education: Master's Degree: Physics; Master's Degree: Related Field,

Work Experience: Related field

Responsibilities

• Knowledgeable of all aspects of medical physics in radiation therapy including brachytherapy, SRS, SBRT, radiation shielding, treatment planning, radiation safety and regulatory compliance. Purposefully conducts all aspects of the job in an ethical manner in support of the UPH-Methodist commitment to ethical behavior in all areas of personal and professional activity
  • Completes hospital-wide orientation, annual hospital competencies and unit specific competencies.
  • Demonstrates good verbal and written communication skills with patients, families, healthcare team members and other customers. Verbal communication is clear and precise. Written communication is legible, if handwritten, and done in a timely manner using approved abbreviations.
  • Completes computer documentation in accordance with hospital policies.
  • Assures compliance with local, state, and federal guidelines in the acquisition, storage, and application of radioactivity used in therapeutic applications.
  • Assures compliance with regulatory agencies such as IEMA, JCAHO, ACR, NRC, by adhering to the respective guidelines of each agency.
  • Assures departmental compliance with outside organizations to maintain compatibility with protocol studies.

• Develops, implements, and reviews the policies and procedures that assure proper functioning of all therapeutic equipment including accelerators, and brachytherapy equipment, insuring smooth and safe operation. Performs required QA activities.
  • Participates in departmental and radiation safety meetings.
  • Participates in strategic planning for the needs of the radiation oncology department.
  • Monitors and maintains documentation for radiation monitoring of departmental staff.
  • Evaluates all equipment for its continued utility, appropriateness, reliability, and condition and makes recommendations on obsolescence and replacement.
  • Participates in or leads physics projects
  • Participates in regulatory compliance tasks
  • Assures performance of an annual output check of each beam to verify their consistency with national standards and prepares a report on this process and its results.
  • Assures that the daily output and quality assessment checks of radiation producing equipment are performed and that equipment is in proper working order.
  • Maintains proper output checks on accelerators, simulation, and other radiation therapy associated equipment.
  • Initiates and routinely reviews all treatment equipment operational logs and service reports.
  • Performs clinical QA of equipment specifications, acceptance testing, commissioning and calibrations on all new and repaired clinical equipment, and the lead shielding requirements of rooms.
  • Participates in quality assurance checks and performance improvement initiatives.
  • Participates in routine QA of patient treatment records.
  • Develops and performs departmental physics QA program
  • Maintains and documents the inventory of all radioactive materials and returns used materials in a timely manner.
  • Acts as Department Radiation Safety Officer and assists in radiation safety tasks.
  • Develops and implements new radiation oncology projects in coordination with the department manager, as directed by the radiation oncologists.
  • Maintains and organizes required records, reports and files, and collects necessary statistics.

• Assists dosimetry in treatment planning for External Beam, Stereotactic Radiosurgery and Brachytherapy
  • Evaluates and implements necessary changes and updates in treatment planning computer, radiation calculation and measurement, and record and verification software.
  • Prepares coordinates and effectively collaborates with the radiation oncologists and technical staff on optimal treatment plans.
  • Instructs and supervises dosimetrist and technologist in special treatment techniques associated with treatment plan.
  • Oversees technical aspects of dosimetrist’s and technologist’s activities.
  • Provides technical in-services as necessary for the demonstration of new techniques and other appropriate subjects.
  • Assumes responsibility of maintaining proficiency in job skills and seeks opportunities for continued growth and has ability to meet the department work schedule.
  • Assists radiation oncologists with brachytherapy procedures and maintains all regulatory requirements for all radioactive materials.
  • Assists with orientation of new employees and students.
  • Performs other related duties incidental to the work described herein

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $86.01per hour - $147.94per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

The Oncology Counselor and Social Worker is a core member of the oncology navigation and supportive care team, providing comprehensive psychosocial assessment, clinical counseling, and resource navigation for adult cancer patients, survivors, families, and caregivers. This role delivers therapeutic counseling, crisis intervention, and practical support throughout the cancer journey, addressing emotional, social, financial, and psychosocial barriers that may affect the quality of life of cancer patients and their families. The position collaborates with the interdisciplinary team to ensure coordinated, patient-centered care and supports transitions across the continuum, including diagnosis, treatment, survivorship, and end-of-life care.
Qualifications

Certifications:

• Licensed Clinical Social Worker (LCSW) - Illinois Department of Financial and Professional Regulation (IDFPR),
• Driver's License - Illinois Secretary of State (ILSOS)
• Licensed Clinical Professional Counselor (LCPC) - Illinois Department of Financial and Professional Regulation (IDFPR).
• Licensed Social Worker (LSW) - Illinois Department of Financial and Professional Regulation (IDFPR).

Education: Master's Degree: Clinical Psychology; Counseling; Social Work (Required).

Work Experience: Clinical in a related field; Social worker in healthcare setting

Other Requirements

Writes, reads, comprehends and speaks fluent English Ability to handle multiple interruptions and changing priorities Demonstrate basic knowledge of medical and cancer terminology Demonstrate basic knowledge of health system operations Demonstrate proficiency in Microsoft Office Advanced reading skills Advanced writing skills Advanced oral skills Professionalism Relationship management

Responsibilities

Clinical Counseling & Psychosocial Support

• Conducts comprehensive psychosocial assessments, identifying emotional, social, and behavioral needs.
• Provides individual, family, and group counseling (in-person and via telehealth) to support coping, resilience, and adherence to treatment plans.
• Delivers crisis intervention and supportive counseling for oncology-related issues, including non-pharmacologic support for pain, sleep, and distress.
• Develops and implements goal-directed care plans in collaboration with the multidisciplinary team.
• Utilizes evidence-based interventions, including cognitive behavioral therapy and brief therapies.
• Documents all assessments, interventions, and referrals in the health record according to standards.
• Participates in distress and depression screening, assessment, evaluation, and follow-up.
• Engages in advance care planning and end-of-life conversations.
• Identifies and addresses risk management issues, involving appropriate hospital and community agencies as needed.
• Ensures timely, thorough, and concise documentation that meets payor and regulatory requirements.

Resource Navigation & Case Management

• Assists patients in accessing resources for transportation, lodging, financial assistance, and insurance.
• Maintains comprehensive knowledge of community, hospital, and national resources; acts as a liaison to connect patients/families to appropriate services.
• Provides education and assistance with Advance Directives, end-of-life planning, and legal documentation.
• Advocates for patient rights, confidentiality, autonomy, and informed consent.
• Supports patients and families with transitions to survivorship and end-of-life care.
• Active member of the medical interdisciplinary team, ensuring ongoing communication to facilitate understanding and support of patient/family needs.
• Works collaboratively to develop and implement coordinated care plans.
• Participates in team meetings, family conferences, and quality improvement activities.

Program Outreach & Quality Improvement

• Promotes oncology support programs and services within the organization and community.
• Organizes and facilitates psychosocial programming for youth and families (e.g., Kids Konnected).
• Participates in public relations, educational events, and professional associations.
• Engages in ongoing professional development and maintains knowledge of regulatory standards and best practices.

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $27.36per hour - $45.69per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

Provides care to individuals with behavioral/emotional/mental health problems.
Qualifications

Certifications:

• Crisis Prevention Institute (CPI) Training within 3 months.
• Basic Life Support (BLS) within 30 days - American Heart Association (AHA).

Education: Bachelor's Degree: Social Work, Psychology, Related Field.

Other Requirements

Required English Skills Advanced reading skills Advanced writing skills Advanced oral skills Communication Skills Ability to respond appropriately to customer/co-worker Interaction with a wide variety of people Maintain confidential information Ability to communicate only the facts to recipients or to decline to reveal information Ability to project a professional, friendly, helpful demeanor Computer Skills Basic computer knowledge: Uses word processing, spreadsheet, e-mail application, and web browser. Comfortable within a Windows OS and learning new applications.

Responsibilities

ENSURES PATIENTS RECEIVE COMPREHENSIVE SERVICES: Assists the interdisciplinary treatment team in patient assessments and the development of goal directed treatment.

• Obtains pertinent information from referral sources seeking patient admission; assists in facilitating admissions
• Completes admission assessments (except for nursing components)
• Ensures compliance with legal components of admissions (voluntary/involuntary admissions, patients’ rights, obtaining releases of information, 5-day request for release)
• Maintains sound knowledge base of advanced directives
• Administers/scores assessment scales per protocol
• Participates in interdisciplinary clinical staffing or ensures pertinent information is provided to team
• Develops, reviews, and revises plan of care on assigned patients
• Completes required documentation as appropriate including assessment scales
• Addresses the patient's strengths, impairments and interventions identified in the plan of care to achieve expected patient outcomes.

THERAPEUTIC ENVIRONMENT AND SAFETY FOCUS: Assists in the creation and maintenance of a therapeutic milieu so that the unit is a safe, caring, nurturing, healing, and educative environment.

• Sets behavioral limits on patients according to unit policies, individual plan of care and behavior modification plans
• De-escalates patients utilizing CPI techniques
• Participates in application of seclusion/restraints when appropriate; provides monitoring of patients in such situation; completes appropriate documentation, including restriction of rights forms
• Provides supportive care to patients and families.
• Conducts safety rounds
• Assists patients in conflict resolution
• Role models stress management
• Ensures patient safety of unit by following policies/procedures and adhering to unit protocols and national patient safety goals

THERAPEUTIC GROUPS AND INDIVIDUAL THERAPIES: Provides group and individual therapies for all patients as assigned in order to provide comprehensive, quality treatment.

• Facilitates educational sessions, structured groups and psychoeducational groups in accordance with the patient's plan of care
• Utilizes a variety of therapeutic models as appropriate to the clinical situation, but primarily has a brief therapy/cognitive behavioral therapy focus
• Ensures the milieu maintains a therapeutic environment
• Incorporates Recovery principles in all therapeutic interventions
• Documents interventions in a succinct and goal directed manner using DAR format
• Recognizes and reports abuse/neglect situations as required by law
• Provides support, sets limits, and/or facilitates learning from the situation when providing situational 1:1 intervention
• Adheres to group rules and scheduled groups start and end on time.
• Follows group content outlines in group manual and individualizes groups to needs of current patient population
• Engages patients to participate of all patients as appropriate in community meetings
• Interacts with parents/significant others to answer programming questions, patient progress, etc.

PERFORMANCE IMPROVEMENT FOCUS: Assists in Performance Improvement activities on unit.

• Actively promotes and achieves customer satisfaction (patient, family, departments and physicians)
• Generates ideas for improving processes, treatment, and patient care
• Participates in Root Cause Analyses and assists in development of action plans and implementation of action plans
• Serves on unit-based and hospital-based committees
• Precepts new employees
• Follows through on assignments generated by Program Manager or unit committees
• Volunteers for assignments which are designed to affect needed changes.

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $22.54per hour - $37.64per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

As a member of the interdisciplinary team, contributes professional nursing knowledge and skills in the provision and management of care to patients through the application of the nursing process.
Qualifications

Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR), Education: Bachelor's Degree: Nursing (Required), Work Experience:
Responsibilities

CLINICAL EXCELLENCE FOCUS: Promotes the use of evidence-based practice through the nursing process, protocols and procedures.

- Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes.
- Develops an individualized plan of care using a collaborative approach with the patient/family and health care team.
- Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes.
- Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift.
- Modifies plan of care based on evaluation and as needed based on changes in patient condition.
- Completes required documentation as appropriate, including patient chart and event reports.
- Demonstrates professional accountability for own practice as evidenced through seeking resources and continued self-development.
- Demonstrates technical knowledge of equipment and troubleshoots when problems arise.
- Acquires and maintains current knowledge and skills in evidence-based nursing practice.
- Promotes the professional development of self and team members
- Shares clinical knowledge through informal teaching and in response to the learning needs of others.
- Demonstrates a practical problem-solving approach to patient moving and handling issues (as applicable).
- Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable).
- Possesses knowledge and skills necessary to obtain adequate lab specimens for testing.
- Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.

WORK ENVIRONMENT & CULTURE FOCUS: Coordinates the interdisciplinary care of the patient through collaboration with team members and utilizes additional resources when necessary.

- Analyzes clinical situations in a systematic way and acts to obtain resources or correct problems to meet or exceed expected outcomes or patient needs.
- Recognizes need for assistance and utilizes resources, including physician and nurse to nurse (UAT) consultation in a timely manner.
- Demonstrates ownership and persistence to ensure problem is resolved in best way possible.
- Able to assume assignment of non-complex and some complex patient management with some turnover in assignment.
- Consistently prioritizes work based on changes in patient condition, changes in assignment and unanticipated interruptions.
- Identifies and utilizes team resources to solve identified problems or needs.
- Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes.
- Works with other team members in delegating tasks and activities appropriately.
- Provides goal-focused shift report.
- Advocates with physicians on patient's behalf when necessary.
- Utilizes communication and teamwork strategies aimed at promoting high team performance and achieving optimal patient outcomes and unit productivity.
- Chooses an appropriate and meaningful communication style when interacting with others: gives and accepts constructive feedback to/from peers.
- Able to adhere to assigned weekly, weekend, and holiday call shifts in accordance with hospital policies and protocols.

PATIENT EDUCATION FOCUS: Assesses and chooses teaching strategies appropriate to the patient's/family's age specific needs.

- Adapts teaching strategies based on patient's response, readiness to learn and level of comprehension.
- Takes cultural, age-specific, gender, and developmental factors into consideration when teaching patients about procedures, illness, hospital experience, etc.
- Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals.
- Consults appropriate resources within the hospital to provide specialized education.
- Utilizes SVI patient education system as a resource for patients and family members.

PERFORMANCE IMPROVEMENT FOCUS: Actively participates in data collection, analysis, and problem solving and gives input on process improvements and patient satisfaction.

- Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital
- Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction
- Actively promotes and achieves customer satisfaction (patient, family, departments, physicians).
- Participates in the implementation of Performance Improvement initiatives.
- Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs.
- Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards.
- Serves on unit based councils
- Identifies practice problems on the unit
- Implements changes in own clinical practice based on literature and unit process improvement outcomes.
- Works on assigned projects, data collection, audits as assigned.

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $32.81per hour - $56.43per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Overview

Sign-on Bonus Available!

Relocation bonus available for 1yr+ experience and >50mi

To assist the Cardiologists in performing invasive and diagnostic/interventional cardiac/vascular and electrophysiologic procedures; as well as technical hemodynamic monitoring and interpretation using automated techniques. Providing care to meet patient needs and handle other duties as required and assigned.

Qualifications

License/Certifications:
Basic Life Support (BLS) Provider - American Heart Association (AHA); Licensed Radiologic Technologist - Radiography - Illinois Emergency Management Agency (IEMA); Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA); Registered in Radiography (R) - American Registry of Radiologic Technologists (ARRT)

Education:
Certificate of Completion: Radiologic Technology (Required)

Other Knowledge/Skills:

Responsibilities

To assist cardiologists in performing invasive coronary/vascular/EP diagnostic and/or therapeutic procedures using a specific technique. To set up and operate a variety of electrical/imaging equipment and computers.
Knowledge of hemodynamic concepts, cardiac anatomy and physiology, and the purpose and operation of equipment and supplies inherent in cardiac/vascular diagnostic and interventional procedures
Knowledge and competency in moderate sedation administration and policy protocol
Knowledge of EP concepts, theory, and the fluoroscopic anatomy and physiology involved in diagnostic and interventional EP procedures
Displays good judgement and problem-solving skills
Displays ability to organize and prioritize performance based on procedural findings
Ability to recognize and assist in treatment of any complication arising from cardiac/vascular/EP diagnostic and interventional procedures
Advocates for patient's needs
Ability to set up sterile table with appropriate supplies specific to each procedure performed within the area
Knowledge of correct preparation and draping of patients
Extensive knowledge of use and function of supplies specific to cardiac/vascular diagnostic and interventional procedures
Knowledge and ability to properly connect to appropriate physiologic monitoring equipment
Knowledge of radiation safety and appropriate use and function of imaging equipment
Advanced knowledge of EKG interpretation and arrhythmia recognition, analysis, and interpretation
Hemodynamic and procedural results/outcome interpretation
Selection and operation of procedural supplies/equipment based on procedural findings
Knowledge of data analysis and interpretation specific to device implantation and function
Operation of both monophasic and biphasic defibrillators
Ability to effectively communicate and educate patient during procedures to alleviate anxiety and ensure focused patient care
Ability to recognize and assist any anesthesia needs inherent in the care of the deeply sedated or anesthetized patient
Collaborate with Research RN/Coordinator in carrying out laboratory-based research
Excellence in communication skills and professional interaction enable incumbent to interact with physicians so that patient safety, satisfaction and optimal patient outcomes are facilitated during procedures
Collaborates with team members and other health care providers in planning patient care specific to procedures being performed; assumes accountability for patient care by directing team members, if necessary, so that a standard of excellence and optimal patient outcomes can be achieved
Excellence in communication skills enable incumbent to effectively train and mentor team members
Appropriate, professional interaction with various vendors to ensure patient safety and positive outcomes resulting from product and/or equipment/supply use
Updates knowledge and skills as equipment changes are implemented within the area
Checks and evaluates equipment to ensure adequate performance and general safety on a daily basis
Manages digital archiving system ensuring safe storage of patient images and reports
Promptly notifies appropriate personnel and removes any malfunctioning equipment
Promptly reports any equipment or supply malfunction or defective status so that proactive steps may be taken to ensure patient safety
Demonstration of knowledge and ability to trouble-shoot and/or problem-solve any equipment within the area
Demonstrate the ability to query archived images from deep archive storage, as well as create CD's to facilitate transmission of patient information
Knowledge and recognition of Invasive Cardiology routinesProvides care to the patient undergoing coronary invasive procedures in the Cath Lab through the use of guidelines, policies, procedures, and standards of care. To report significant observations and reactions to appropriate personnel and document care provided.
To maintain a working knowledge of aseptic technique
Proficient in set-up of all procedures
Assist in passing sterile guidewires, catheters, and other devices as required, using aseptic technique
Prepare instruments for sterilization
Suggest equipment of procedural changes required for the quality care of the patient
Aseptic technique
Proficient in preparing sterile field
Understands requirements for maintaining aseptic technique
Observes for deviation from proper aseptic technique by others then has it corrected
Report significant observations to appropriate personnel and document observations and care provided.
Accurate interpretation of EKG and alerts physician of any irregular activity.
Accurate documentation of the procedure, in regards to catheter used, patient care, and response, medication given by the nurse, and complications during the procedure.
Ability to assist in selecting catheters that will permit the Cardiologists in obtaining a complete diagnosis.
Record, interpret, and calculate variousActively participates in data collection, analysis, problem solving and gives input on process improvements and patient satisfaction. Actively engages and attends educational opportunities to achieve continuing education specific to cardiac/vascular disease process and physiology. Achieve continuing education points to maintain active licensure.
Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital
Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction
Actively promotes and achieves customer satisfaction (patient, family, departments, physicians)
Participates in the implementation of Performance Improvement initiatives
Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs
Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards
Serves on unit based councils
Identifies practice problems on the unit
Implements changes in own clinical practice based on literature and unit process improvement outcomes
Works on assigned projects, data collection, audits as assigned
Follow-up and/or feedback to management with problem solving and incident reports.
Continuing education such as seminars and college classes
Participation in department decision making by providing input on new products and policy changes.
Attend departmental education and/or staff meetings
Willingly shares knowledge and guides new orientees
Perform daily QI checks on the equipment.Assigns/completes charging/coding worksheet on each patient undergoing procedures within the area in an accurate and timely manner to ensure correct billing, optimal revenue reimbursement, and productivity statistics based on procedural charges.
Selects/identifies appropriate charge sheet/charge codes depending on the procedure/procedures performed on the individual patient
Completes charge sheet with correct charges/codes to facilitate accurate coding based on the procedures performed/completed
Validates correct charges/codes with clinical cardiac coder to ensure accuracy when questions/issues arise
Attends yearly education to ensure competency and concurrent knowledge as CPT codes are modified/updated on an annual basis in all areas (cardiology, radiology and endovascular)
Maintains a charge/code error or missed charge rate of less than 3% of total charges on a monthly and annual basis

About Us

Find it here.

Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.

Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care.

We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:

Compensation and Benefits

The compensation range for this position is $31.32per hour - $53.87per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.

Job Title: Sr. Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design:

- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration:

- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation:

- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture:

- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation:

- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience:

- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.

**This position supports hybrid work schedule depending on organization needs.**

Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.

JOB SUMMARY

Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.

- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities

JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:

- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).

EDUCATION & EXPERIENCE REQUIREMENTS

- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.

Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.

You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.

What can you expect to do?

LEADERSHIP RESPONSIBILITIES

- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.

- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.

- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)

- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.

- Empowered to make key decisions with respect to quality and features that may impact customer experience.

- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.

- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.

- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.

- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.

- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.

- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.

- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.

- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.

- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).

FUNCTIONAL RESPONSIBILITIES

- Primary technical interface for manufacturing rack test development efforts from concept through delivery.

- Own driving resolution of all issues regarding test solutions aligned with critical path.

- Reviewer and approver of technical risks, and contingency/mitigation plans.

- Can review and provide input to material plans, test plans, test reports, lessons learned.

- Owns preventative actions so gaps in E2E process or capability are addressed long-term.

- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.

- Provide technical and product subject matter expertise to the factories and customers.

- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.

KNOWLEDGE REQUIREMENTS

- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.

- Exceptional knowledge and experience regarding product development processes and tools.

- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.

- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.

- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.

What is the experience needed to be successful in this role?

- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.

- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.

- Excellent verbal and written communication skills.

- Prior experience directly or indirectly managing engineering and/or development teams.

- Experience managing remote, multi-national and geographically dispersed development teams.

- Domestic and/or international travel, up to 30%, may be required.

Benefits Package with Jabil

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.