Engineering Jobs in Maple Valley Washington

Press Operator Hydraulic & Mechanical A - 13706

$26.32

Auburn, WA 2 days ago

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington .

As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials. Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained. You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes. Your attention to detail and commitment to excellence will directly contribute to our operational success.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
Load and secure dies into the press, checking for defects and torquing as necessary.
Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.

Physical Demands and Potential Hazards:

Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators?
1+ Years of experience reading blueprints and structural drawings.
1+ Years of experience operating a hydraulic press.
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

permanent

Electronic Technician - C2209

🏢 Boeing

$33.32

Auburn, WA 4 days ago

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician to join our Electronics team in Auburn & Puyallup , Washington.

In this role, you will be empowered to apply your technical expertise and creativity to solve complex challenges in cutting-edge aerospace technology. You’ll work with a diverse team to develop, test, and maintain advanced electronic systems that are critical to the success of our aircraft. This position offers a dynamic environment where innovation, precision, and continuous learning are valued, giving you the chance to grow your skills while making a tangible impact on aviation excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

Perform electronic and software testing, diagnosis, troubleshooting, adjustment, repair, calibration, checkout, and maintenance of electronic systems and associated equipment, often developing and improvising service procedures as needed.
Fabricate, assemble, and test developmental and prototype mechanical, electrical, electromechanical, and electronic assemblies, including those utilizing software/firmware applications.
Lead, instruct, and review the work of employees in lower classifications assigned to fabricate, assemble, test, calibrate, repair, modify, maintain, and service electronic equipment and systems.
Operate and utilize test equipment, instruments, tools, and machines required to complete work assignments.
Interpret and work from block diagrams, schematic diagrams, prints, specifications, technical information, manufacturing records, sketches, and verbal instructions.
Perform design and fabrication work related to packaging developmental assemblies, including mechanical and assembly fabrication, with engineering assistance.
Maintain certifications, licenses, and permits necessary for work assignments.
Prepare reports, maintain records, and ensure accountability of contract tools and test equipment.
Devise and build temporary tools and work-around methods to facilitate troubleshooting and repair.
Handle and protect components and assemblies in accordance with shop practices, procedures, and drawing requirements.
Prioritize work assignments as directed by leads or supervisors and obtain necessary engineering drawings and test documents when not provided.
Set up and perform bench or automatic tests per work orders, test documents, equipment manuals, and engineering instructions.
Troubleshoot faults in electronic circuits and hardware, adjusting, repairing, or replacing components as required.
Select and use appropriate hand, power, and bench tools to perform required operations.
Maintain test equipment through periodic maintenance and monitor certification dates.
Troubleshoot and repair computerized test systems.
Handle and dispose of hazardous materials safely, following Safety Data Sheets (SDS) and using personal protective equipment.
Pack electronic equipment for travel according to drawings and Boeing specifications.
Verify work quality after each operation to ensure compliance with drawings and standards.
Prepare completed or reworked jobs for inspection.
Communicate with leads, supervisors, engineers, or planners when assistance or clarification is needed, especially regarding drawings, paperwork, or discrepancies.

Physical Demands and Potential Hazards:

Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications :

Ability to lift, push, and pull up to 35 pounds.
3+ years of experience using electronic test equipment.
3+ years of hands-on experience with power and control electronics circuit design, product design and manufacturing.
3+ years of experience testing and troubleshooting electronics and electrical systems.

Preferred Qualifications:

UL Certified Electrician.

Conflict of Interest:

Successful candidates for this job must successfully satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

permanent

Tool and Die Maker - 76010

🏢 Boeing

$40

Renton, WA 4 days ago

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washingto n.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

Perform all functions related to tool fabrication, rework, and repair as required.
Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.
Read work orders and blueprints to identify required tasks, tools, and equipment.
Develop plans for the fabrication, maintenance, and repair of tools.
Initiate and coordinate engineering change requests with internal support groups when necessary.
Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.
Access and utilize appropriate tool drawings, models, and specifications using available computing systems.
Select and verify necessary equipment from the shop storage area, ensuring current tool certification.
Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.
Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.
Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.
Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.
Maintain accurate records of orders and coordinate tooling information with other shifts and departments.
Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.
Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.
Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.
Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.
Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.
Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.
Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.
5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.
2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

5+ years of experience as a Tool & Die Maker.
2+ years of experience with hydraulics and pneumatics.
Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.
Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.
Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.
Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.
Ability to reverse engineer and manufacture mold components within time limitations
Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

permanent

Crane Main Mech A-81409-029

🏢 Boeing

Salary not disclosed

Kent, WA 5 days ago

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

Determine and/or develop methods where procedures may not be available.
Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
Operate, use and maintain overhead maintenance work platforms
Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
Inspect and maintain building runway rails and expansion joints.
Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
Maintain logs, charts, and perform written and verbal tie-in records.
Prepare reports and schedules as required.
Work with and assist employees of other classifications as required.
Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
Able to lift up to 35 pounds.

Preferred Qualifications:

Experience inspecting and maintaining building runway rails and expansion joints.
Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

permanent

Electronic Technician - Precision Machine Tool Maintenance - 87210

🏢 Boeing

Salary not disclosed

Kent, WA 5 days ago

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.

As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
Comply with all Federal, State, and Company regulations while performing duties.
Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
Communicate relevant information to succeeding shifts using management-approved methods.
Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
Maintain equipment records, logs, and updates, preparing reports and schedules as required.
Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
Ensure system configurations comply with FAA and accreditation requirements.
Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal).
Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
Perform tasks associated with other job classifications when necessary to complete assignments.
Obtain and maintain applicable licenses, certificates, and certifications.
Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.

Physical Demands and Potential Hazards:

Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications :

3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.

Preferred Qualifications:

Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
Ability to work around electromagnetic fields as a result of various types of production equipment.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

This position is for a variety of shifts . Working in other shifts and/or overtime varies based on business needs.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 30, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

permanent

AI Experimentation Strategy Director (Remote)

✦ New

🏢 GoDaddy

Salary not disclosed

Remote, Oregon 1 day ago

Location: United States

At GoDaddy the future of work looks different for each team. Some teams work in the office full-time; others have a hybrid arrangement (they work remotely some days and in the office some days) and some work entirely remotely.

This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or meetings.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join Our Team

We are looking for an experienced leader in experimentation methodology to join our core Applied ML team. The Applied AI and Machine Learning team handles large-scale data to support many business areas. We develop a cohesive navigation experience across channels and web pages. Our goal is to simplify and improve the shopping experience for everyday entrepreneurs worldwide, helping them quickly find what they need on our website.

In this leadership role, you will enhance the strategic direction of our experimentation methodology efforts. You will use simulations and reinforcement learning, ensuring consistency with business objectives, and supporting cross-functional teams in data-informed experimentation solutions. You will guide teams working at the intersection of large-scale foundation models, multi-agent systems, and RL-based optimization, encouraging a culture of collaboration, innovation, and technical excellence.

What you'll get to do...

Define and drive the strategic roadmap for AI driven experimentation methodology, aligning initiatives with organizational goals and business impact
Supervise and mentor teams of scientists and engineers, providing technical guidance and career development
Promote meticulous experimentation, including the development of simulation environments and robust evaluation frameworks using machine learning and RL
Collaborate with product, engineering, and business teams to translate research outcomes into scalable, production-ready experimentation solutions
Facilitate knowledge sharing and cultivate a collaborative, innovative environment across the Applied ML team and broader organization

Your experience should include...

3+ years of professional experience managing and leading high-performing teams, including mentoring and coaching team member to achieve organizational goals
5+ years of professional experience in experimentation methodology, Reinforcement Learning, and software development
2 + years of professional with experimentation platforms, data pipelines, and analytical tools to guide methodological rigor
A deep understanding of statistical principles, causal inference, and experimental design for large-scale digital products
A track record of partnering effectively with experimentation platform teams, product managers, and business stakeholders to drive data-informed decision-making
5+ years of professional experience translating complex statistical concepts into actionable insights for technical and non-technical audiences
The ability to define and implement a vision for experimentation best practices across diverse product areas

You might also have...

Master's in computer science or equivalent quantitative fields

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way.

About us... GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us.

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.

Remote working/work at home options are available for this role.

Not Specified

Lead Experimentation Scientist in AI (Remote)

✦ New

🏢 GoDaddy

Salary not disclosed

Remote, Oregon 1 day ago

Location: United States

At GoDaddy the future of work looks different for each team. Some teams work in the office full-time; others have a hybrid arrangement (they work remotely some days and in the office some days) and some work entirely remotely.

This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or meetings.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join Our Team

We are looking for an experienced leader in experimentation methodology to join our core Applied ML team. The Applied AI and Machine Learning team handles large-scale data to support many business areas. We develop a cohesive navigation experience across channels and web pages. Our goal is to simplify and improve the shopping experience for everyday entrepreneurs worldwide, helping them quickly find what they need on our website.

In this leadership role, you will enhance the strategic direction of our experimentation methodology efforts. You will use simulations and reinforcement learning, ensuring consistency with business objectives, and supporting cross-functional teams in data-informed experimentation solutions. You will guide teams working at the intersection of large-scale foundation models, multi-agent systems, and RL-based optimization, encouraging a culture of collaboration, innovation, and technical excellence.

What you'll get to do...

Define and drive the strategic roadmap for AI driven experimentation methodology, aligning initiatives with organizational goals and business impact
Supervise and mentor teams of scientists and engineers, providing technical guidance and career development
Promote meticulous experimentation, including the development of simulation environments and robust evaluation frameworks using machine learning and RL
Collaborate with product, engineering, and business teams to translate research outcomes into scalable, production-ready experimentation solutions
Facilitate knowledge sharing and cultivate a collaborative, innovative environment across the Applied ML team and broader organization

Your experience should include...

3+ years of professional experience managing and leading high-performing teams, including mentoring and coaching team member to achieve organizational goals
5+ years of professional experience in experimentation methodology, Reinforcement Learning, and software development
2 + years of professional with experimentation platforms, data pipelines, and analytical tools to guide methodological rigor
A deep understanding of statistical principles, causal inference, and experimental design for large-scale digital products
A track record of partnering effectively with experimentation platform teams, product managers, and business stakeholders to drive data-informed decision-making
5+ years of professional experience translating complex statistical concepts into actionable insights for technical and non-technical audiences
The ability to define and implement a vision for experimentation best practices across diverse product areas

You might also have...

Master's in computer science or equivalent quantitative fields