Engineering Jobs in Los Angeles Wfh

RELOCATION ASSISTANCE: Relocation assistance may be available

Northrop Grumman’s Defense Systems is currently seeking a FPGA Digital Design Engineer 3 with the desire to learn new technologies to join our innovative Digital Technologies Organization to help develop, enhance, and maintain FPGA designs on cutting edge products and systems. As a Digital FPGA Engineer at Northrop Grumman, you will have a challenging and rewarding opportunity to be a part of our Enterprise-wide digital transformation. Through the use of Model-based Engineering, DevSecOps and Agile practices we continue to evolve how we deliver critical national defense products and capabilities for the warfighter. Our success is grounded in our ability to embrace change, move quickly and continuously drive innovation.

The selected individual will work on FPGA and ASIC Design across the full product life cycle process. In this capacity, you will utilize your working knowledge of digital signal processing and digital interfaces. This role will support the ARRGM-ER program within the Advanced Weapons Business Unit in Northridge, CA .

This position requires the selected candidate to work on-site in Northridge; CA on a 9/80 schedule . Telework is not available for this position. Relocation assistance, although not guaranteed, may be available.

Roles and Responsibilities:

Responsible for research, design, and development for complex high speed digital designs. 
Support the implementation of digital FPGA hardware architecture and algorithms.
Collaborate with Systems Engineering to ensure firmware design meets system level requirements, review designs and analysis.

Basic Qualifications for FPGA Digital Design Engineer 3:

• Bachelor’s degree in electrical engineering or other STEM discipline with 5 years of digital verification engineering experience using industry standard simulation tools; 3 years with an MS degree

• Must have hands on FPGA design experience with VHDL and/or Verilog within the past 3 years.

• Experience with AMD/Xilinx and/or Intel/Altera SoC FPGAs

• Experience with Electronic Design Automation (EDA) Tools: Vivado, Quartus, and QuestaSim

• Must have an active DoD Secret Clearance to start

Preferred Qualifications for FPGA Digital Design Engineer 3:

• Experience with DSP, MATLAB, and SimuLink

• Knowledgeable in FPGA physical constraints and achieving timing closure.

• Experience with board or system level debug using test equipment such as oscilloscopes and logic analyzers.

• Generation of Test Benches and support of formal VHDL Verification

• Experience in high-speed FPGA implementation such as AXI, DMA, and Ethernet

• Strong design skills in VHDL and/or Verilog

• Experience in debugging FPGA applications using Altera signal tap or Xilinx ILA

• Experience with PCB schematics 

#LI-MA1

AAR OEM Supply-NewVac, which is a highly specialized aerospace and defense manufacturer producing mission-critical wire harnesses and cables. Our products support U.S. Government programs and leading aerospace prime contractors, including systems used in advanced fighter aircraft, naval launch systems, and precision targeting platforms. In these environments, failure is not an option. NewVac, has built a strong reputation for precision manufacturing, uncompromising quality, and deep engineering expertise in high-reliability connectivity solutions.

Located In Chatsworth, CA.

Description:

NewVac is seeking a General Manager to lead the company’s operations, growth strategy, and organizational development. This executive will oversee all functional areas, including manufacturing, engineering, quality, and program management.

The General Manager will be responsible for scaling operations, strengthening relationships with prime aerospace customers, and ensuring flawless execution of mission-critical defense programs. This is a hands-on leadership role suited for an experienced aerospace manufacturing executive who understands the rigor of defense contracting and high-reliability production environments.

What you will be responsible for:

• Lead all manufacturing and operational activities across production, engineering, quality, and supply chain.
• Drive operational performance, on-time delivery, and scalable production capabilities.
• Implement lean manufacturing and continuous improvement initiatives to enhance efficiency and quality.
• Serve as a key operational interface with U.S. Government program offices and prime aerospace OEM customers.
• Ensure successful execution of complex defense programs and long-term production contracts.
• Support business development efforts with Tier-1 aerospace and defense contractors.
• Maintain rigorous compliance with AS9100, ITAR, and defense program quality standards.
• Ensure mission-critical products meet the reliability requirements of aerospace and defense systems.
• Identify opportunities to expand NewVac’s presence across next-generation aerospace and defense programs.
• Scale manufacturing capacity to support increasing demand from prime contractors.
• Build, develop, and mentor a high-performing leadership team across operations, engineering, and program management.
• Foster a culture of accountability, precision, and operational excellence.

What you will need to be successful in this role:

• 10+ years of leadership experience in aerospace, defense, or high-reliability manufacturing environments
• Experience working with prime aerospace contractors or U.S. defense programs
• Background in electromechanical assemblies, wire harnesses, connectivity systems, or aerospace components preferred
• Strong operational leadership with proven P&L management experience
• Deep understanding of aerospace quality systems and regulatory compliance frameworks
• Demonstrated ability to scale manufacturing operations while maintaining uncompromising quality standards
• Experience managing complex defense and aerospace supply chains
• Operationally rigorous with a strong focus on execution and results
• Customer-oriented with the credibility to effectively engage with aerospace prime contractors
• Ability to lead in environments where precision, reliability, and accountability are paramount

The rewards of your career go far beyond just your salary:

• Competitive salary and bonus package
• Comprehensive benefits package including medical, dental, and vision coverage.
• 401(k) retirement plan with company match
• Generous paid time off program
• Professional development and career advancement opportunities

Physical Demands/Work Environment:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility.
• The environmental characteristic for this position is an office setting.
• Candidates should be able to adapt to a traditional business environment.

Provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources.

Compensation:

The anticipated salary range for this position is $137,000 to $175,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. In addition to base pay, this role is eligible for a bonus.

About Monarch Landscape Companies

Monarch Landscape Companies is a leading network of landscape brands operating across the U.S. We proudly serve clients nationwide, delivering reliable, high-quality landscape services at scale.

At Monarch Landscape Companies, your achievements determine your rewards, your abilities define your success, and your professionalism leads to autonomy!

• Job Title: Vice President of Construction
• Location: Milpitas, CA or Los Angeles, CA

JOB SUMMARY:

The Vice President of Construction for Jensen Landscape serves as the second-in-command for the construction division and is responsible for driving EBITDA growth, operational excellence, and people leadership across the business. This role partners closely with the President of Construction to execute strategy, enhance field labor productivity, and scale a high-performing organization.

The VP leads all aspects of construction operations including estimating, project management, and field execution, while ensuring Monarch is a best place to work and a best-in-class operator in the industry.

MINIMUM QUALIFICATIONS

Education

• Bachelor’s degree in Construction Management, Engineering, Business or related field or equivalent experience.

Experience

• 10+ years of leadership experience in commercial construction or landscape construction.

Specialized Skills

• Proven success managing P&L and driving EBITDA growth.
• Strong leadership, financial, and operational expertise.
• Bilingual English/Spanish preferred.

Other Requirements

• 30- 50% travel
• Valid driver’s license

ESSENTIAL DUTIES

• Serve as the clear #2 leader for the construction division, acting as a strategic partner to the President of Construction.
• Establish people leadership as the top priority by building a high-performance, A-player culture and making Monarch the best place to work.
• Drive EBITDA growth through operational effectiveness, targeting >5% organic growth and strong margin performance.
• Lead workforce planning, recruiting, and talent development to ensure the organization can support growth.
• Be highly visible in the field, building followership and ensuring alignment between leadership and crews.
• Own and improve labor productivity, crew efficiency, and field execution standards.
• Drive accountability for full P&L performance including budgeting, forecasting, and financial reviews.
• Lead annual strategic planning, budgeting, and quarterly business reviews for the construction division.
• Ensure organization-wide understanding of profit drivers, KPIs, and operational levers.
• Implement and monitor KPIs, dashboards, and BI tools to drive performance improvements.
• Oversee estimating, bid strategy, and project lifecycle execution from start to closeout.
• Ensure strong collaboration between sales, operations, and customers to drive successful project delivery.
• Strengthen customer relationships and drive initiatives that improve satisfaction and retention.
• Lead safety culture and ensure full compliance with OSHA and company standards.
• Drive fleet, equipment, and capital efficiency to improve productivity and reduce costs.
• Partner with functional leaders (HR, Finance, Safety, IT) to prioritize and execute operational initiatives.
• Lead integration of acquisitions and ensure alignment to Monarch operating standards.
• Stay ahead of industry trends including technology, automation, and equipment innovation.
• Develop and implement training programs for managers and field leaders.
• Maintain strong subcontractor relationships and ensure quality standards are met.

CORE COMPETENCIES:

Leadership

• Builds high-performing teams, develops talent, and drives accountability.

Financial Acumen

• Strong understanding of P&L, EBITDA drivers, and operational levers.

Operational Excellence

• Deep expertise in field operations, labor productivity, and project execution.

Strategic Thinking

• Ability to translate strategy into execution and prioritize high-impact initiatives.

Customer Focus

• Strong orientation toward delivering customer value and retention.

Collaboration

• Works effectively across functions and builds strong relationships.

Execution

• Moves quickly, drives results, and follows through on commitments.

Total Rewards

At Monarch, we strive to deliver a Total Rewards package that will attract, engage, and retain top talent. Elements of our Total Rewards package include competitive base pay and variable compensation opportunities.

Monarch also provides eligible employees with an array of additional benefits, including:

• Medical, Dental, and Vision Plans
• Retirement Savings & Employee Equity Program
• Flexible Time Off, 6 paid Holidays, Bereavement, and Jury Duty
• Education Assistance & Career Advancement
• Company Vehicle
• On-Demand Pay through DailyPay
• Referral Bonus Programs
• Gym Membership and Mobile Carrier Discounts

The specific programs and options available to any given employee may vary depending on eligibility factors such as position, tenure, geographic location, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is provided in compliance with state specific laws. Salaries are based upon candidate experience and qualifications, as well as market and business considerations, and therefore may be different in other locations or operating divisions.

Pay Range: $195,000 - $200,000

Monarch Landscape Companies is an EEO and E-Verify participating employer.

Monarch Landscape Companies is an On Demand Daily Pay employer.

Position Title: CNC Programmer Location: Montebello, CA 90640, USA Job Category: Manufacturing Req ID: CNCPR001448 Schedule: Full Time Posted:Nov 4, 2025 Job Details Description Close to You Anywhere in the World Groupe SEB is the global reference for small domestic appliances, cookware and professional coffee with its portfolio of 35 emblematic brands such as Tefal, Seb, Rowenta, Moulinex, Calor, Lagostina, Krups, WMF.

Present in 150 countries, we produce in more than 40 industrial sites and sell 11 products per second.

We believe in the richness of diversity and aspire to create an inclusive and stimulating work environment where our more than 30,000 employees can grow and give their best.

SEB Professional is a subsidiary of Groupe SEB.

At SEB Professional North America, we are a leader in the professional coffee machine industry, offering three equipment lines: Schaerer, WMF, and Curtis.

Our innovative coffee machines are trusted worldwide and can be found in a variety of settings, including hotels, restaurants, coffee shops, and convenience stores.

You've likely enjoyed coffee from our machines at McDonald's, Dunkin', Chick-fil-A, Peet’s, or Tim Hortons.

Join us in delivering exceptional coffee experiences worldwide.

What We Will Achieve Together: The CNC Programmer is the Subject Matter Expert and works independently, making decisions related to the interpretation from reading blueprints, translating these into the proper set up of mills, lathes, lasers to accurately set the tolerance limits in support of “just in time” delivery of fabrication to production.

The CNC Programmer acts as a backup to the Supervisor/Manager covering vacation and sick time and the CNC Programmer trains others in the programming and setup for the application of job runs.

Base Salary Range: $30/hr
- $38/hr DOE.

Key Responsibilities Include: Collaborates with engineering on building prototypes Leads and/or Assists in the design and development of machine tooling Proficient in set up and operation of Turrets, Laser, Panel Bender, Safan First article inspection Adjusts machine settings to operate machinery in accordance with established procedures Communicate machine operation or parts defects In collaboration with the Fabrication Manager makes decisions on spending needs for the machine shop equipment Assists Machine Operators answering questions and solving problems Identify tool and die issues and perform repair (sharpening) and replacement of tool & die Observes operation of machine and verifies conformance of formed or cut workpiece to specifications, using measuring instruments, such as fixed gauges, calipers, and micrometers Sources and obtains quotes on machine shop tooling needs Leads and Supports training and preparing bench strength Ensures that all IMS Standards are maintained and followed Has responsibility for scrap control and reduction Review production schedule for turret and laser and maximize sheet metal yield Runs simulations for new routings and bill of materials for costing purposes Maintain cleanliness of workstations Ability to operate electric pallet jack and hand pallet jack Requirements: Experience: Minimum of 3 years of experience in a role with equivalent experience.

Preferably in a fast-paced organization with an international presence.

Manufacturing experience is a must.

Education: High School Diploma.

Certification: CNC Programmer from accredited school/program.

Key Skills: CNC Programming, Blueprint Reading, CAD/CAM Software, Machine Tooling, and Safety Standards.

Core Competencies: Problem Solving, Interpersonal Skills, Action Orientation, Detail Orientation, Effective Communication and Collaboration.

Overview: Type of Employment: Full time.

Non-Exempt Workplace Schedule Type: On-Site (May be required to work weekends) Position Location: Montebello Why SEB Professional North America? Whether working remotely, in one of our offices, or flexing in between, we offer a number of benefits and perks to support you and your family.

Here is a sample of some of our benefits programs: Medical / Dental / Vision Insurance – Generous Employer Contribution 401(K) Retirement Plan w/ up to a 9% employer contribution after 1 st year of employment.

On Site Gym 12 Paid Holidays Voluntary Benefits and Discount programs Equal Employment Opportunity (EEO) SEB Professional is an Equal Opportunity Employer.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other category protected by federal, state, or local law.

SEB Professional does not make employment decisions based on any protected class status.

For more information, please see OFCCP Equal Employment.

PIb2aec8b2dad

Hermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries.

As a Manager of the Avionics Build you will have a unique opportunity to build and lead a cross-functional team of individuals that develop wire harnessing and integrated electro-mechanical assemblies.

You will be responsible for standing up and optimizing end-to-end avionics harnessing and electro-mechanical assembly capabilities that ensure high-speed, high-reliability, manufacturing with a commitment to cost reduction, novel process definition, and rapid iteration.

Responsibilities

• Build a team that delivers the flight and development harnessing, and electrical subassembly/component built and tested ready for aircraft integration
• Ownership of avionics development test assets including environmental testing
• Harness component innovation, design, and qualification
• Manage a team of supervisors, technicians, and engineers that represent avionics harness and electro-mechanical assembly manufacturing in a development environment
• Develop and/or source new tools and capital equipment to drive harness manufacturing new heights of performance
• Evangelize and drive design for manufacturing best practices and design for test with design engineers and test engineers
• Lead the overall manufacturing development strategy for the areas under ownership for key metrics: quality, delivery, and cost. Actively measure team's performance against these metrics

Basic Qualifications

• Experience with avionics or aerospace manufacturing standards (e.g., IPC-A-610, IPC/WHMA-A-620, NASA-STD-8739)
• 3+ years of experience in a production leadership role in aerospace, electronics, or a high-reliability manufacturing environment
• Direct experience managing or supporting teams building wire harnesses or electronic assemblies
• Strong technical background in electronics or harness design, build, or test

Preferred Skills and Qualifications

• Experience standing up a manufacturing shop/capability from scratch (highly desired)
• Competence with electrical test equipment (multimeters, oscilloscopes, power supplies, etc.)
• Bachelor's degree in engineering, manufacturing, or a related field, or equivalent practical experience
• Strong organizational and problem-solving skills with a focus on execution
• Proven ability to collaborate across departments in a fast-paced environment
• Strong computer and analytical skills including proficiency in spreadsheets, databases, shop floor management software (ERP/MRP/MES) or related programs and dashboards

$138,125 - $230,000 a year

U.S. EXPORT CONTROL COMPLIANCE STATUS

The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a \"U.S. person\" as defined by or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending.

EQUAL OPPORTUNITY

Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Silvus Technologies, a leading provider of advanced MANET and MIMO communications systems, is reshaping mesh network technology for mission-critical applications on the ground, in the air, and at sea. Its battle-proven StreamCaster family of MANET radios and proprietary MN-MIMO waveform provides the vital communications link for defense, law enforcement, and public safety agencies around the world, and in the toughest operational environments.

With deep roots in DARPA research, Silvus Technologies develops world-class advanced communications technologies that are reshaping the tactical communications landscape. From pure line-of-sight to extreme non-line-of-sight, Silvus radios form a self-healing, self-forming mesh network, enabling secure and reliable connectivity, including video and high-bandwidth data.

Silvus Technologies is a wholly owned subsidiary of Motorola Solutions, Inc.

Silvus is seeking an Associate Inside Sales Representative (ISR) - DoD, reporting to the Senior Director of Sales, USA, on the Sales team. This position is a junior-level sales support role focused on the U.S. Department of Defense. The successful individual in this Associate ISR role will support the Senior ISR and Sales Directors through CRM data management, quote preparation, research, and customer engagement. This role is ideal for individuals new to defense sales who are eager to learn and contribute to a high-performing team.

This position can be hybrid or fully remote (depending on location). If on hybrid schedule, a minimum of 3 days onsite per week is expected. On-site days are Mondays, Wednesdays, and Thursdays. The location for this role if hybrid is Silvus Technologies' HQ in the heart of vibrant West Los Angeles.

The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion.

• Assist with quote generation, CRM updates, and pre-sales documentation.
• Conduct initial research on DoD opportunities, solicitations, and market developments.
• Support Sales Directors with basic correspondence and scheduling.
• Shadow product demos and join virtual client meetings as needed.
• Collaborate with the Sales Administration and Sales Engineering teams on proposals.
• Monitor contract portals and highlight leads to Senior ISR.
• Prepare briefing materials and data summaries for internal use.
• Support tradeshow preparation and follow-up logistics.
• Actively pursue ongoing education on industry terminology, government procurement processes, competitors, and competitive technologies.

• High School Diploma or GED
• Minimum 2 years of sales, proposal, or analyst experience.
• Organized, communicative, and eager to learn about defense sales.
• Proficient with Microsoft Office tools (Word, PowerPoint, Excel), and/or equivalent Google tools.
• NOTE - Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.

• Bachelor's or Associate's degree.
• Familiarity with defense, aerospace, or electronics manufacturing environments.
• Experience with Zoom, Microsoft Teams, PDF tools, and CRM systems for daily communication and collaboration.

• Outdoor environment for demonstrations.
• While performing the duties of this job, the employee is required to do the following:
  • Lift equipment up to 50 lbs. for the setup of demonstration and testing.
  • Manage the movement of large, suitcase-size Pelican cases (e.g., for travel, demonstrations, etc.).

US Pay Range $24.04 - $28.85 USD

All employment is contingent upon the successful clearance of a background check and drug test. Silvus is proud to be an equal opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws.

We will ensure that individuals with disabilities are provided with reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation.

*Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands

Qualification path

No previous professional experience is required to apply to this role, however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project and your work will be subject to our standard quality assurance checks during the term of this agreement. 

Basic Requirements

• Full Professional Proficiency in Spanish language
• Being a resident in United States for the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in United States
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe but at your convenience.

Equal Opportunity

All qualified applicants will receive consideration for a contractual relationship without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. At TELUS Digital AI, we are proud to offer equal opportunities and are committed to creating a diverse and inclusive community. All aspects of selection are based on applicants’ qualifications, merits, competence, and performance without regard to any characteristic related to diversity.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands. 

Qualification path

No previous professional experience is required to apply to this role, however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project and your work will be subject to our standard quality assurance checks during the term of this agreement. 

Basic Requirements

• Full Professional Proficiency in Bengali and English language
• Being a resident in The United States or the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in India
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe but at your convenience.

Equal Opportunity

All qualified applicants will receive consideration for a contractual relationship without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. At TELUS Digital AI, we are proud to offer equal opportunities and are committed to creating a diverse and inclusive community. All aspects of selection are based on applicants’ qualifications, merits, competence, and performance without regard to any characteristic related to diversity.

Assistant Project Manager

Construction | Chicago, IL | Hybrid Flexibility

A globally recognized Architecture, Engineering, and Construction firm is seeking an Assistant Project Manager to join their downtown Chicago office. This firm delivers complex, high profile projects across the United States and internationally, with a diverse portfolio including industrial, residential, commercial, education/public, mixed use, and hospitality developments valued up to $200M+.

This role offers the opportunity to support the delivery of large scale projects while working within a fully integrated AEC delivery model alongside architecture, engineering, and construction teams.

The Opportunity

• The Assistant Project Manager will support senior project leadership in the planning and execution of construction projects from preconstruction through completion. This role will assist with coordination across project teams, consultants, subcontractors, and clients to ensure projects are delivered safely, on schedule, and within budget.
• You will gain exposure to complex projects across multiple sectors while developing your leadership and project management capabilities within a collaborative AEC environment.

Key Responsibilities

• Support the planning and execution of construction projects valued up to $200M+.
• Assist in managing projects from preconstruction through project closeout.
• Coordinate with project managers, superintendents, project engineers, and subcontractors to maintain project progress.
• Work closely with internal architectural and engineering teams within the integrated AEC environment.
• Assist with project financial tracking including budgets, cost reporting, forecasting, and change management.
• Help maintain project schedules, documentation, and reporting.
• Support communication between clients, consultants, subcontractors, and internal teams.
• Participate in project meetings and assist in tracking action items and deliverables.
• Ensure project documentation complies with safety standards, contractual requirements, and company procedures.

Qualifications

• 2 to 6 years of construction project management experience.
• Experience supporting commercial, mixed use, residential, industrial, hospitality, or institutional construction projects preferred.
• Exposure to projects valued $10M to $100M+.
• Strong organizational and coordination skills.
• Ability to support project financials, schedules, and documentation.
• Excellent communication and teamwork capabilities.
• Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.

Why Join

• Globally respected Architecture, Engineering, and Construction firm with an international project portfolio.
• Opportunity to work on complex projects across multiple sectors.
• Strong mentorship and career progression toward Project Manager and Senior Project Manager roles.
• Collaborative environment working alongside architecture and engineering teams in an integrated delivery model.
• Downtown Chicago office with a hybrid work schedule with 2 days work from home.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment, such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands.

Qualification path

No previous professional experience is required to apply to this role; however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project, and your work will be subject to our standard quality assurance checks during the term of this agreement.

Basic Requirements

• Full Professional Proficiency in the English language
• Being a resident in the United States for the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in the United States
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open-book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe, but at your convenience.