Engineering Jobs in Lake, VA
175 positions found — Page 3
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES A Joint Data Network & Information Technology Field Engineer performs or leads complex field engineering assignments and perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic / mechanical equipment and information technology (IT) systems and infrastructures.
Employee will be responsible for the following functions/duties: Apply knowledge of design specifications for more complex systems/projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Recommend technology refresh upgrades for end-of-life systems as a technical subject matter expert Define / write function and security requirements for service delivery of command, control, computer, communication and IT systems, which could include virtual environments and associated applications Manage, design and implement command-and-control, debriefing and other associated information system infrastructure and applications Provide operation, troubleshooting and debugging support for computer operations systems, including system security, access, configuration, backups and restores Assist in incident handling in conjunction with the Facility Security Officer and Information Security Officer / Information Systems Security Manager Assures common engineering principles are consistently applied to internal software, hardware and multimedia inventories Researches engineering solutions to address software and hardware requirements in support of system sustainment and new system projects that handle computing, networking, video, audio and data while taking into consideration emissions and communications requirements Assists in system administration, troubleshooting and remediation of command-and-control, debriefing and other IT systems operation performance issues Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface and liaison with customers at all levels from quotation to final design and test activities, design reviews, and technical working group meetings to comply with requirements and specifications Conduct site visits, experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendations Perform other job-related duties, as required DESIRED QUALIFICATIONS Ability to work with a group or independently High energy, multi-disciplined and professional Experience in a variety of disciplines across electronics, computers, networks, radio frequency, datalink, video, mechanical and associated technological fields REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 12 years of experience in the specialty field are required for this position.
In addition, a Joint Data & Information Technology Field Engineer must possess the following qualifications: Broad knowledge of concepts, principles, and practices of engineering that enable performance as a senior technical contributor on complex projects or programs Knowledge and skill sufficient to apply developments in engineering to solve problems in the specialty area Working knowledge of computer systems and integrated software application programs Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA’s Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is typically performed an office environment with no unusual hazards.
Occasional lifting (up to 750 pounds), constant sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations will be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment.
Calibrate all controls, gauges, meters, etc.
Identify, locate, and operate all shut-off valves.
Order, mark, and stock parts and supplies as needed.
Maintain inventory and purchase orders log.
Inspect tools, equipment, or machines.
Enter and locate work-related information using computers.
Operate power lift.
Complete the life safety checklist, including the fire-pump run test and generator run test.
Inspect fire sprinkler valves and alarm systems.
Assist in development of disaster response protocols.
Respond and attend to owner/guest repair requests.
Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees.
CORE WORK ACTIVITIES Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications.
Ensure uniform and personal appearance is clean and professional, maintain confidentiality of proprietary information, and protect company assets.
Speak with others using clear and professional language.
Develop and maintain positive working relationships with others, and listen and respond appropriately to the concerns of other employees.
Ensure adherence to quality expectations and standards.
Reach overhead and below the knees, including bending, twisting, pulling, and stooping.
Visually inspect tools, equipment, or machines.
Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance.
Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds.
Move up and down stairs, service ramps, and/or ladder.
Grasp, turn, and manipulate objects of varying size and weight.
Perform other reasonable job duties as requested by Supervisors.
Perform other duties as assigned.
Attention to customer service with a professional and pleasant personality.
Available to work a flexible schedule including evenings, weekends, and holidays.
Marriott Vacations Worldwide is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Under minimum direction of a supervisor or engineering personnel and with considerable latitude for independent and innovative actions within a technical area, a Drafter designs and/or creates layouts of complex major and minor systems, assemblies, and components, using various software programs, or freehand drawings.
Employee will be responsible for the following functions/duties: Prepare multiple-view mechanical detail and assembly drawings often of a complex nature from layout drawings, sketches, existing or prototype parts, and or verbal instructions Perform other routine drafting activities such as revising or redrawing existing drawings, making blocks, cells, etc.
Use a variety of precision measuring tools to verify or obtain data for drawing development Provide complete printed circuit board drawing packages to include assemblies, detail drawings, smart schematics, Gerber files, etc.
Research scientific and technical materials, standards, and specifications for information and selection of components Ensure all work conforms to DoD MIL-STD-100 and company drafting standards Provide information and direction to lower-level drafters as necessary Perform other job-related duties, as required Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.
In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching and crawling.
Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.
Travel to remote company work locations will be required.
Requirements -- Education, Technical, and Work Experience A graduate certificate from an accredited two- to four-year technical institute, or equivalent, and a minimum of 10 years of experience in a related field are required for this position.
In addition, a Drafter must possess the following qualifications: Competence in the use of a variety of CAD software programs such as MicroStation, AutoCAD, Schematic Capture, and PCB Auto-router tool, as appropriate Effective verbal and written communication skills Planning/organizational skills Ability to work under deadlines.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses / certification, and the inability to obtain and maintain the required clearance, license, or certification may affect and employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
The R&D Scientist II would be working for a Major Fortune 500 Company and has career growth potential.
R&D Scientist II Highlights: ??? Schedule: Monday???Friday, Day Shift (40 hours/week, 8 hours/day) ??? Pay Range: $38.81???$41.67 hourly R&D Scientist II Responsibilities: ??? Represent the R&D function as an Extended Team member supporting large technology and product development programs ??? Design and execute experiments supporting development, verification, and evidence generation efforts ??? Prepare samples/prototypes for internal and external analysis ??? Develop and execute test protocols; document results with guidance from senior staff ??? Conduct root cause analysis for product development and sustaining engineering activities ??? Support product development work streams including Requirements Management, Design Verification, and Design Transfer ??? Collaborate cross-functionally with Engineering, Marketing, Medical Affairs, Manufacturing, Quality, and Regulatory Affairs ??? Contribute to intellectual property growth, including patent applications and invention disclosures ??? Maintain laboratory equipment and ensure adherence to Good Laboratory Practices (GLP) ??? Mentor junior team members and foster a collaborative team environment ??? Travel as required (conferences, manufacturing sites, customer visits) R&D Scientist II Qualifications: ??? Bachelor???s degree in Materials Engineering, Mechanical Engineering, Chemical Engineering, Chemistry, Biomedical Engineering, Cell/Molecular Biology, Biochemistry, Materials Science, or related field ??? Minimum 2 years of direct laboratory experience ??? Proficiency with Microsoft Office ??? Regulatory experience in medical device or pharmaceutical industry ??? Materials testing experience (polymers, hydrogels, TCA lab, Environmental Stress Cracking testing) Preferred Qualifications: ??? Master???s or PhD degree ??? Experience with statistical analysis tools ??? Experience handling clinical specimens (especially human blood); bloodborne pathogen training will be provided If you are interested in this R&D Scientist II position, please apply to this posting with Luke H.
at A-Line!
Position Summary The Water Specialist ensures all product contact water (city water and plant generated potable water) used in the facility meets regulatory FDA Grade ‘A' Pasteurized Milk Ordinance (PMO) requirements and internal food safety and quality standards. This role oversees water treatment systems, monitors water quality, supports compliance with FDA/FSMA, and ensure all water used in manufacturing, sanitation, ingredient preparation and CIP systems is compliant with internal, customer, and regulatory expectations. Essential Functions
Water Quality Monitoring & ControlConduct routine sampling/testing following PMO Chapter 7 and company requirements.
Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
Maintain accurate logs for raw, treated, and post-treatment water.
Conduct trend analysis to identify areas with continuous improvement opportunity.
Water System ManagementMonitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
Manage water inventory through planning and predicting production of potable water and purchase of city water.
Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
Participate in maintenance planning and troubleshooting of water system components.
Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
CIP rinse and final rinse water.
Direct-contact water used in equipment, valves, and product pathways.
Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.
ComplianceEnsure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
Lead water-related corrective action investigations and preventive action documentation.
Documentation, Reporting & Continuous ImprovementMaintain water sampling schedules, test results, calibration records, and system maintenance documentation.
Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.
Training & Cross-Functional SupportTrain CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.
Competencies
Page Break Problem Solving/Analysis
Integrity
Dependable
Strong Communication Skills
Teamwork
Innovative
Computer Skills
Time Management/Initiative
Attentive to detail
Continuous Learning
Page Break Supervisory ResponsibilityThis position has no supervisory responsibilities but will provide guidance and direction to plant staff.Work EnvironmentThis job operates in an office, lab and plant environment. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud.Position Type/Expected Hours of WorkThis is a full-time position, typically working Monday through Friday. This position may require some work on weekends and holidays.TravelLess than five percent travel expected for this position. Required Education, Experience & Certifications
Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
2+ years in dairy manufacturing, water treatment, or environmental monitoring.
Understanding of CIP systems, dairy sanitation, and hygienic design principles.
Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
Experience with microbial testing, water analysis equipment, and trend evaluation.
Preferred Education
, Experience & Certifications
Bilingual in English/Spanish.
HACCP and/or Preventive Controls Qualified Individual certification.
Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.
Additional Eligibility QualificationsMinimum age requirement is 18. Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice.
Position Summary The Water Specialist ensures all product contact water (city water and plant generated potable water) used in the facility meets regulatory FDA Grade ‘A' Pasteurized Milk Ordinance (PMO) requirements and internal food safety and quality standards. This role oversees water treatment systems, monitors water quality, supports compliance with FDA/FSMA, and ensure all water used in manufacturing, sanitation, ingredient preparation and CIP systems is compliant with internal, customer, and regulatory expectations. Essential Functions
Water Quality Monitoring & ControlConduct routine sampling/testing following PMO Chapter 7 and company requirements.
Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
Maintain accurate logs for raw, treated, and post-treatment water.
Conduct trend analysis to identify areas with continuous improvement opportunity.
Water System ManagementMonitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
Manage water inventory through planning and predicting production of potable water and purchase of city water.
Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
Participate in maintenance planning and troubleshooting of water system components.
Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
CIP rinse and final rinse water.
Direct-contact water used in equipment, valves, and product pathways.
Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.
ComplianceEnsure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
Lead water-related corrective action investigations and preventive action documentation.
Documentation, Reporting & Continuous ImprovementMaintain water sampling schedules, test results, calibration records, and system maintenance documentation.
Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.
Training & Cross-Functional SupportTrain CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.
Competencies
Page Break Problem Solving/Analysis
Integrity
Dependable
Strong Communication Skills
Teamwork
Innovative
Computer Skills
Time Management/Initiative
Attentive to detail
Continuous Learning
Page Break Supervisory ResponsibilityThis position has no supervisory responsibilities but will provide guidance and direction to plant staff.Work EnvironmentThis job operates in an office, lab and plant environment. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud.Position Type/Expected Hours of WorkThis is a full-time position, typically working Monday through Friday. This position may require some work on weekends and holidays.TravelLess than five percent travel expected for this position. Required Education, Experience & Certifications
Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
2+ years in dairy manufacturing, water treatment, or environmental monitoring.
Understanding of CIP systems, dairy sanitation, and hygienic design principles.
Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
Experience with microbial testing, water analysis equipment, and trend evaluation.
Preferred Education
, Experience & Certifications
Bilingual in English/Spanish.
HACCP and/or Preventive Controls Qualified Individual certification.
Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.
Additional Eligibility QualificationsMinimum age requirement is 18. Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice.
Position Summary The Water Specialist ensures all product contact water (city water and plant generated potable water) used in the facility meets regulatory FDA Grade ‘A' Pasteurized Milk Ordinance (PMO) requirements and internal food safety and quality standards. This role oversees water treatment systems, monitors water quality, supports compliance with FDA/FSMA, and ensure all water used in manufacturing, sanitation, ingredient preparation and CIP systems is compliant with internal, customer, and regulatory expectations. Essential Functions
Water Quality Monitoring & ControlConduct routine sampling/testing following PMO Chapter 7 and company requirements.
Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
Maintain accurate logs for raw, treated, and post-treatment water.
Conduct trend analysis to identify areas with continuous improvement opportunity.
Water System ManagementMonitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
Manage water inventory through planning and predicting production of potable water and purchase of city water.
Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
Participate in maintenance planning and troubleshooting of water system components.
Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
CIP rinse and final rinse water.
Direct-contact water used in equipment, valves, and product pathways.
Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.
ComplianceEnsure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
Lead water-related corrective action investigations and preventive action documentation.
Documentation, Reporting & Continuous ImprovementMaintain water sampling schedules, test results, calibration records, and system maintenance documentation.
Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.
Training & Cross-Functional SupportTrain CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.
Competencies
Page Break Problem Solving/Analysis
Integrity
Dependable
Strong Communication Skills
Teamwork
Innovative
Computer Skills
Time Management/Initiative
Attentive to detail
Continuous Learning
Page Break Supervisory ResponsibilityThis position has no supervisory responsibilities but will provide guidance and direction to plant staff.Work EnvironmentThis job operates in an office, lab and plant environment. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud.Position Type/Expected Hours of WorkThis is a full-time position, typically working Monday through Friday. This position may require some work on weekends and holidays.TravelLess than five percent travel expected for this position. Required Education, Experience & Certifications
Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
2+ years in dairy manufacturing, water treatment, or environmental monitoring.
Understanding of CIP systems, dairy sanitation, and hygienic design principles.
Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
Experience with microbial testing, water analysis equipment, and trend evaluation.
Preferred Education
, Experience & Certifications
Bilingual in English/Spanish.
HACCP and/or Preventive Controls Qualified Individual certification.
Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.
Additional Eligibility QualificationsMinimum age requirement is 18. Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes Production Engineering Team is hiring a Mid-Level or Senior Level Staff Analyst . This position supports recruiting, hiring, and workforce management of our manufacturing engineering population across Boeing Commercial Airplane programs.
About the Team
The Production Engineering Hiring Team is a small, fast-moving group responsible for sourcing and hiring engineers, interns, and technicians across Manufacturing Engineering, Equipment & Tooling Engineering, and Numerical Control (NC) Programming. We partner closely with Talent Acquisition team, hiring managers, and university partners to build a strong, diverse pipeline of early-career and experienced technical talent.
Role Summary
We are seeking an energetic, highly organized Staff Analyst to support our hiring operations. This person will project-manage hiring activities, engage with universities and candidates, coordinate closely with recruiters and hiring managers, schedule interviews, and create dashboards and metrics to track hiring performance. The ideal candidate is proactive, personable, and skilled at managing multiple priorities in a collaborative environment.
Primary Responsibilities:
Manage end-to-end recruiting project activities for Manufacturing Engineering, Equipment & Tooling, and NC Programming roles, including interns, technicians, and engineers.
Partner with the recruiting team and hiring managers to define role requirements, timelines, and candidate screening criteria.
Conduct outreach to candidates via email, phone, and LinkedIn; manage candidate communications and provide timely status updates.
Coordinate interview logistics: scheduling, interviewer briefings, room/virtual meeting setup, and candidate travel arrangements when needed.
Plan and execute university hiring trips and on-campus events (career fairs, information sessions, technical demos).
Develop and maintain hiring performance dashboards and reports (time-to-hire, pipeline velocity, source effectiveness, diversity metrics).
Track requisition and candidate status; ensure data integrity and compliance with hiring policies.
Assist with employer branding materials and event collateral for campus engagements.
Provide post-offer onboarding coordination support in partnership with HR and hiring managers.
Continuously improve hiring processes and candidate experience through feedback and metrics-driven recommendations.
Basic Qualifications (Required Skills/ Experience):
Bachelor’s degree (Business, Human Resources, Engineering, or a related field preferred but not required)
2+ years’ experience in recruiting operations, talent sourcing, university relations, workforce planning, or project coordination—experience supporting technical or manufacturing hiring strongly preferred.
Demonstrated project management skills with the ability to manage multiple concurrent hiring projects and deadlines.
Proficiency with Microsoft Excel and PowerPoint; experience building dashboards (Smartsheet) preferred.
Experience with Applicant Tracking Systems (ATS) and recruiting tools (LinkedIn Recruiter, Handshake, etc.) desirable.
Ability to travel for university visits and hiring events (frequency as required).
3 or more years of related work experience or an equivalent combination of education and experience (Mid-Level)
Preferred Qualifications (Desired Skills/Experience):
Strong written and verbal communication skills; comfortable engaging with students, candidates, hiring managers, and campus partners.
Energetic, personable, and highly engaging—able to represent the team on campus and at events.
Strong attention to detail and excellent organizational skills.
Collaborative and flexible team player who thrives in a small, fast-paced environment.
Comfortable with technical topics and able to learn basic Manufacturing/NC concepts to better engage candidates.
5 or more years of related work experience or an equivalent combination of education and experience (Senior Level)
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This position is for 1st shift.
Union:
This is a non-union-represented position.
Pay and Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements
Summary pay range for Mid-Level (Level 3): $83,300 - $112,700
Summary pay range for Senior (Level 4): $104,500 - $141,450
Applications for this position will be accepted until Mar. 25, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Commercial Airplanes (BCA) Environmental Control Systems (ECS) Multip rogram Engineering organization is seeking a first line manager to lead the Thermal and Computational Fluid Dynamics (CFD) team in Everett, WA .
Position Overview:
This is a hands-on technical leadership and program management role responsible for delivering detailed thermal and airflow analyses across Boeing commercial and military derivative airplane programs. You will lead a multidisciplinary team of analysts and engineers to produce high quality , timely results that support design trade studies, certification, supplier engagement, and in service troubleshooting.
This role blends people leadership, technical mentorship, and program execution. You will champion technical excellence, foster a collaborative culture, and partner with systems, structures, interiors, and the technical fellowship to support our biggest projects in BCA as well as grow tools and capabilities for the future.
Key Position Responsibilities:
Lead, mentor, and develop the Thermal & CFD team: set priorities, establish clear expectations, conduct performance feedback, and grow technical depth across roles (lead, analysts, TLE, BDE).
Plan and manage the team Statement of Work (SOW): prioritize requests, track progress to plan, and balance capacity across concurrent commercial and military derivative programs.
Deliver technical results: ensure CFD and thermal analysis artifacts (models, scripts, reports, and presentations) meet accuracy, traceability, and documentation standards.
Represent ECS in program reviews, supplier meetings, and customer discussions: prepare and present technical briefings, decision materials, and status updates to both technical and nontechnical stakeholders.
Coordinate multidisciplinary execution: interface with systems, structures, interiors, electrical, and manufacturing teams to align analyses with program needs and certification requirements.
Advocate for safety and quality: identify and communicate risks, propose mitigation plans, and ensure outputs support certification and operational safety cases.
Resource, budget, and computing stewardship: lead staffing plans, forecast resourcing, and manage budget; coordinate with IT for HPC access, licenses, and data storage required to complete the SOW.
Drive technical strategy: partner with the technical fellowship to evaluate and implement future tools, automation, and capability improvements (e.g., mesh automation, workflow orchestration, surrogate modeling).
Foster a high performing , inclusive organization: recruit talent, promote continuous learning, and model Boeing’s values.
Maintain relationships with internal and external customers and suppliers to ensure alignment and successful delivery.
Basic/Required Qualifications:
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry
5+ years of relevant engineering experience, including thermal and/or CFD work.
3+ years of experience leading or supervising engineering teams.
Strong background in fluid dynamics and heat transfer analysis.
Practical experience with CFD and thermal tools (examples: ANSYS Fluent, CFX, STARCCM+, Thermal Desktop, SINDA/FLUINT) or comparable industry software.
Demonstrated ability to coordinate multidisciplinary teams and deliver against schedule, cost, and performance goals.
Excellent verbal and written communication skills; ability to present complex technical topics to diverse audiences.
Desired/Preferred Skills and Experience:
5+ years conducting thermal analysis evaluations for aerospace systems.
Experience with high performance computing (HPC) environments, license management, and CFD workflow automation.
Knowledge of certification processes and regulatory requirements relevant to environmental control and thermal systems.
Experience managing technical work and coordinating across global teams.
Prior success implementing team capability growth plans and mentoring early career engineers.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union:
This is not a union-represented position.
Pay and Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:
$151,000 - $204.000
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
