Engineering Jobs in Kirkland

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.
• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.
• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.
• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.
• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.
• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.
• Screen paperwork for options, substitutions, and effectiveness of parts and materials.
• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.
• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.
• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.
• Coordinate and complete travelers, investigating and clearing check orders as necessary.
• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.
• Ensure that certifications for tools, test equipment, and personnel are current and compliant.
• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.
• Perform first article inspections and FAA conformities, coordinating results as required.
• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).
• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.
• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.
• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.
• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.
• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector
• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators
• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
• Experience working with Microsoft Office (Excel, Word, PowerPoint)
• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.

As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems. This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Operate boilers, and may operate engines and boiler associated auxiliary equipment.
• Read gauges, meters, and charts to track boiler operations.
• Monitor boiler water, chemical, and fuel levels.
• Activate valves to change the amount of water, air, and fuel in boilers.
• Fire coal furnaces or feed boilers, using gas feeds or oil pumps.
• Inspect and maintain equipment to ensure that it is operating efficiently.
• Check safety devices and perform environmental checks routinely.
• Record data and keep logs of operation, maintenance, and safety activity.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• City of Seattle Steam Engineer's License Grade 2.
• 3+ Year Experience of boiler operation and maintenance experience.
• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.

Shift Work Statement:

• This position is for 4th shift

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $60.92 per hour – $60.92 per hour

Applications for this position will be accepted until Apr. 03, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.

As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.

• Document any discrepancies and report them to the appropriate personnel for resolution.

• Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.

• Witness and document functional tests of aircraft components and systems to detect leaks.

• Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.

• Maintain personal and tool certifications, ensuring compliance with operational standards.

• Assist and train other employees on inspection methods and procedures, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector or in a related inspection role within a similar industry, such as, but not limited to, Aerospace and Manufacturing.

• Ability to work in confined spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Ability to complete Fall Protection Training.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to use a respirator or have been respirator certified.

• Proficiency in reading, writing, and speaking English. 

Preferred Qualifications:

• Experience working with precision measuring tools.

• Experience sealing

Conflict of Interest: 
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett, Washington. 

As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety. Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings. By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft. Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role. Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance. Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities:  

• Obtain work assignments from the team leader or review relevant paperwork to determine tasks. 

• Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair. 

• Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches. 

• Use prints, specifications, and documents necessary to accomplish work effectively. 

• Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft.

• If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records. Disassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials. 

• Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders. 

• Fit and assemble detail components to repaired parts according to specifications and drawings. 

• Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.

• Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups. 

• Remove marks and scratches from metal surfaces using appropriate tools and techniques. 

• Seal edges of repair areas with color-matched sealant as required.

• Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed. 

• Document repairs identified by other mechanics and maintain personal certifications as required. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• 1+ years of experience working with vinyl wallpaper, composites/non-metallic materials.

• Experience applying and evaluating decorative paint/ink for color match.

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.

Preferred Qualifications: 

• 1+ years of experience with aerospace or automotive spray painting.

• Experience working with detailed work instructions or reading and interpreting blueprints and drawings.

• Experience with touch-up painting.

• Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 21, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.

As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.

• Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.

• Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.

• Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.

• Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.

• Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.

• Interpret and adhere to airworthiness directives, service bulletins, and other approved data.

• Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.

• Create production aids as needed to facilitate work assignments.

• Maintain necessary certifications, licenses, and permits for assigned work.

• Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights up to 35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).

• Must be willing to work any shift, including days, evenings, nights, and weekends.

Preferred Qualifications:

• FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.

• 5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Safety Sensitive Statement:

This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 06, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking an Aviation Maintenance Technician and Inspector, who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA.

Position Responsibilities:

• Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight.
• Perform Quality functions such as Customer and DCMA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations.
• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.
• Perform Aviation Maintenance Technician Inspector tasks in order to obtain and maintain knowledge, skills and required certifications.
• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.
• Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.

This position requires an Active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)

Basic Qualifications (Required Skills/Experience):

• Minimum 3 years of aircraft maintenance experience with military, airline or certificated repair station background.
• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Must be able to work any shift and overtime as required

Preferred Qualifications (Desired Skills/Experience):

• Prefer a valid FAA Airframe and Powerplant Certificate preferred. Please note your certificate number on your resume if you are certified.
• Preferred experience in and/or education in Flight Controls, Avionics electronics/systems, and Analysis.
• Prior military experience and working with military customers

Relocation:

This position offers relocation based on candidate eligibility.

Shift:

This position is for 2nd shift (Subject to change)

Additional Information:

This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards Statement:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $35.32/hr. - $62.45/hr.

Candidates must before March 27th, 2026 to be considered for the position

Applications for this position will be accepted until Mar. 27, 2026

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.