Engineering Jobs in Irvine Ca Orange County, CA

The Environmental Health & Safety Manager (EHS) is responsible to ensure compliance with all safety rules and regulations, the physical security of all company locations, and to assist individuals to be in compliance. This position is responsible for ensuring company is in compliance with all agencies (DOT, OSHA, NFPA, and EPA) regulations, training, and any other requirements by such agencies, our insurance companies, and company requirements. The EHS Manager will serve as a subject matter expert on all safety, compliance, regulatory and related insurance requirements.

Pay Range: $120,000 to $135,000.00 per year

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• 
  
• Serve on local safety committees; review and discus safety needs, provide updates, training, DOT, Hazmat, OSHA and related safety and compliance information.
  
• Implement and manage a comprehensive safety training program base on OSHA and industry specific requirements.
  
• Manage the workplace ergonomics program, active response and adjustments result in negating any mandatory program requirements.
  
• Review facility procedures and work instructions consistent with ISO formatting.
  
• Develop Safety Risk Assessment procedures
  
• Provide subject matter expertise in Process Safety ensuring industry best practice.
  
• Site inspections and corrective action(s):
  
• Train and direct management to inspect facilities, work sites and equipment for violations and hazards.
  
• Provide direction to management on correcting identified problems in a timely manner.
  
• Follow up to make sure all corrective actions were taken and completed.
  
• Assist where needed.
  
• Responsible for updating, maintaining and auditing location safety standards and procedures on a quarterly or annual basis as needed.
  
• Develop effective training programs for managers/employees that will efficiently cover all needed/required materials.
  
• Investigate all accidents to determine the root cause and provide recommendations that eliminate or reduce future hazard or risk.
  
• Track and control inventory of safety supplies and equipment and work with division managers to keep adequate safety supplies on-hand.
  
• Assist with training for new hires and provide ongoing training of all employees.
  
• Review and update MSDS and SPCC plans as needed
  
• Evaluate the effectiveness of the safety program using established goals and make recommendations, and implement corrective action(s) based on industry standards and best practices.
  
• Conduct an annual training for the site that promotes a safe, healthy, and secure work environment that includes emergency situations (like tornados, fires), use of the alarm system, and anything else necessary to promote a safe work environment.
  
• Serves as a safety/compliance liaison with outside organizations.
  

Required Skills:

? Extensive knowledge of OSHA, DOT, NFPA, EPA, other governmental regulations and laws including OSHA 300 logs and requirements by our insurance providers.

? Knowledge of instructional methods and training techniques

Qualifications:

? Bachelor's degree in safety or related field or equivalent work experience.

? 5 years safety management experience.

? Excellent interpersonal, communication, and problem solving skills.

? Knowledge of statistics, data collection and analysis.

? Knowledge of federal and state regulations.

? Proficient in MS Office products.

? Occasional travel required.

Prefer:

? OSHA General Industry 10 or 30 hour training course

? Forklift training experience

This position is currently accepting applications.

Apply Now

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

Pay Range: $30.00 to $36.00 per hour

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now

Job Title: Product Manager

Location: Irvine, CA

Reports to: Director, Product Manager

FLSA Status: Exempt

About Our Organization: RIS Rx (pronounced "RISE Rx") is on a mission to make every dollar allocated for affordability count, delivering true impact for the patients and pharma manufacturers we serve. We’ve built the industry’s first real-time, pharmacist-led GTN Revenue Performance platform, restoring trust, visibility, and integrity to patient affordability.

What sets us apart? Our team combines deep pharmacy roots with cutting-edge technology, tackling patient access barriers in smarter, more human ways. Our people-first culture means you’ll find career growth, great benefits, and a supportive environment waiting for you, because we believe when people thrive, everyone wins.

Join us and help shape a better, brighter future for patient access.

Job Summary

We are seeking an experienced Product Manager to lead the vision, strategy, and execution of innovative software solutions that address key challenges in healthcare technology. This role will focus on driving patient affordability, optimizing gross-to-net (GTN) processes, and mitigating risk for pharmaceutical manufacturers. The Product Manager will serve as the bridge between business, technical, and clinical stakeholders, ensuring products deliver measurable value and align with company objectives. The ideal candidate is a strategic thinker with strong analytical skills, a proven ability to manage the full product lifecycle, and a passion for improving outcomes in the pharmaceutical and healthcare space.

Responsibilities

• Define and own the product vision, strategy, and roadmap for software solutions that address healthcare technology challenges, including patient affordability, gross-to-net (GTN) optimization, and risk mitigation for pharmaceutical manufacturers
• Translate complex business requirements into clear product specifications, user stories, and acceptance criteria for engineering teams
• Collaborate closely with engineering, pharmacists, operations, data analysts, and business stakeholders to ensure product initiatives align with company objectives and customer needs
• Drive the full product lifecycle from ideation to launch, including requirements gathering, prioritization, development, testing, release, and post-launch evaluation
• Lead backlog grooming, sprint planning, and cross-functional standups, ensuring timely delivery of high-quality product releases
• Analyze solution usage data, industry trends, and feedback to inform product decisions and identify new opportunities for innovation and differentiation
• Partner with marketing, sales, and customer implementation teams to support go-to-market activities, product positioning, and customer adoption
• Establish and track key performance indicators (KPIs) to measure product success and drive continuous improvement
• Maintain deep awareness of pharmaceutical trends, regulatory requirements, and competitive landscape to guide long-term product strategy
• Serve as the voice of the customer and ensure that product decisions balance user needs, business objectives, and technical feasibility

Skills

• 5+ years of experience in product management, preferably in healthcare technology, SaaS, or pharmaceutical services
• Experience using product management software (e.g., Jira, Aha!) to manage roadmaps, backlogs, and requirements
• Proven track record of managing software products from concept through launch and iteration
• Strong understanding of Agile/Scrum methodologies and experience working with engineering teams in iterative development environments
• Familiarity with healthcare or pharmaceutical industry processes strongly preferred
• Experience working with cloud-based platforms (AWS or similar), data analytics tools, and software development concepts
• Strong analytical skills with ability to interpret usage data, market research, and financial metrics to drive product decisions
• Excellent leadership and collaboration skills, with experience influencing stakeholders across technical and non-technical teams
• Exceptional communication skills with the ability to explain product decisions and technical trade-offs clearly to executives, customers, and development teams
• Ability to balance strategic vision with day-to-day execution and delivery in a fast-paced environment
• Strong problem-solving skills and the ability to anticipate and resolve complex product challenges

Education

• This position requires a Bachelor’s degree; MBA or advanced degree preferred

What we offer:

• Free gym membership
• Modern office
• Annual merit-based salary increases
• 401(k) with annual company match
• Medical - RIS Rx covers 100% of the employee’s base HMO medical plan
• Voluntary Dental, Vision & Life Insurance
• Flexible Savings Account (FSA)
• Paid Holidays
• Time off that grows with you:
• 3 weeks PTO 0-2 years
• 4 weeks PTO after 3+ years
• 5 weeks PTO after 5+ years
• Recognition programs that celebrate impact and results
• Mentorship and coaching opportunities
• Clear growth paths and career development support
• Fully stocked snack kitchen
• Company-paid lunches

Mechanical Engineer – Aerospace Thermal Management Systems (Integration & Packaging)

Location: Onsite – Irvine CA

Industry: Aerospace & Defense

Duration: 6 months and extendable

Role Overview

We are seeking two highly skilled Mechanical Engineers with experience in the Aerospace & Defense sector to support the development and integration of advanced thermal management subsystems used across military and commercial platforms globally.

This role focuses on mechanical subsystem development from a packaging and integration perspective, including enclosure design and integration of electronic and fluid control components such as pumps, compressors, fans, and valves. The ideal candidate has hands-on experience developing aerospace-grade subsystems within defined volume and interface constraints, ensuring high reliability, environmental robustness, and compliance with industry standards.

These roles will support programs progressing from Preliminary Design Review (PDR) toward Critical Design Review (CDR) and will involve reuse and adaptation of existing product architectures.

Key Responsibilities

• Design and develop mechanical enclosures for aerospace electronic and control subsystems such as thermal management systems and related subsystems
• Package and integrate COTS and custom components into customer-defined volume constraints by integrating components including pumps, compressors, fans, valves, and control electronics
• Develop detailed CAD models, assemblies, and manufacturing drawings (SolidWorks preferred)
• Conduct tolerance analysis, GD&T, stack-up analysis, and design for manufacturability (DFM)
• Support prototype builds, integration activities, testing, and validation
• Implement design considerations to satisfy and qualify the environmental requirements (shock, vibration, temperature, humidity, EMI/EMC interface considerations) per MIL standards.
• Collaborate with electrical, controls, thermal, structural, and systems engineering teams
• Participate in root cause analysis and design refinement
• Ensure compliance with aerospace and defense standards and documentation practices

Required Qualifications

• Bachelor’s degree in mechanical engineering or equivalent.
• 5+ years of experience in Aerospace & Defense mechanical subsystem development
• U.S. Citizen (No Dual Citizenship)
• Strong mechanical packaging and integration experience
• Experience designing enclosures housing electronics and fluid/mechanical components
• Exposure to thermal management systems (ECS, vapor cycle, or liquid cooling preferred but not mandatory)
• Working knowledge of rotating machinery components (fans, compressors, pumps)
• Proficiency in CAD tools (SolidWorks preferred; strong experience in other platforms acceptable)
• Experience with GD&T and tolerance analysis
• Familiarity with aerospace environmental standards (MIL-STD preferred)
• Experience supporting qualification and validation testing
• Strong understanding of materials selection for aerospace applications
• Ability to work in cross-functional engineering teams

Preferred Qualifications

• Experience packaging turbomachinery components within constrained aerospace envelopes
• Exposure to controls systems integration
• Knowledge of vibration isolation and shock mitigation techniques
• Experience supporting PDR/CDR processes
• Familiarity with configuration management and aerospace documentation rigor
• Exposure to FMEA, reliability analysis, and lifecycle support

Job Title: Electronics Lab Technician

Location: Tustin, CA

Zip Code: 92780

Duration:4+ Months

Qualifications

* 2+ years of technician work experience in electronics/engineering labs

* Technology/Technician degree or equivalent experience

* Electric vehicle experience a plus

* Basic electrical understanding

* Excellent soldering and harnessing skills

* Familiar with test equipment such as multimeters, oscilloscopes, eloads, etc.

* Strong technical ability

* Ability to solder fine pitch ICs and 0402 components.

* Experience with MS office tools (Outlook/Excel/Word/PowerPoint/Project)

* Familiarity with Jira tools is a plus

* Python Scripting is a plus

* IPC-610, IPC-620, IPC-7711, IPC-7721 or J-STD-001 certifications are a plus

Seeking an experienced Director of Service Operations to lead and elevate national service performance. This role is responsible for delivering exceptional customer support, optimizing field operations, and ensuring strong alignment between internal teams and an external dealer service network.

Key Responsibilities

• Lead, mentor, and develop the service organization, including technical support, dispatch, warranty, coordination, training, and field service teams.
• Oversee national day-to-day service operations to ensure timely, high-quality customer support and field response.
• Own warranty claim processes, root-cause analysis, and corrective action initiatives to improve product reliability and customer satisfaction.
• Direct parts, dispatch, and service coordination functions to optimize scheduling, resource allocation, and issue resolution.
• Establish and lead service training programs supporting continuous development of customer service and technical personnel.
• Drive operational excellence through KPI development, performance tracking, and implementation of standardized operating procedures.
• Partner closely with engineering, production, and sales teams to translate customer feedback into product and process improvements.
• Strengthen relationships with a nationwide dealer service network, ensuring alignment on performance expectations, training, and service standards.
• Deliver executive-level reporting on service performance, trends, risks, and improvement opportunities.
• Foster a culture of accountability, collaboration, and customer-first execution across the service organization.

Qualifications & Experience

• 5–10 years of leadership experience managing service or technical support organizations within manufacturing, automotive, industrial equipment, or related technical environments.
• Demonstrated success leading cross-functional service teams in fast-paced, customer-driven organizations.
• Strong understanding of field service workflows, warranty management, parts operations, and customer service best practices.
• Proven ability to analyze performance data, establish measurable goals, and drive operational accountability.
• Excellent leadership, communication, and stakeholder influence skills.
• High emotional intelligence with a coaching-oriented leadership style.
• Technical aptitude related to electrical, mechanical, or charging systems strongly preferred.
• Passion for building scalable service organizations and delivering exceptional customer experiences.

Product Development Manager - hardgoods

This role supports the planning, development, and release of consumer-focused products within assigned categories. The Product Manager partners with cross-functional stakeholders to translate customer needs into clear product requirements, coordinate execution across teams, and help drive successful launches and ongoing product performance.

Key Responsibilities

• Contribute to category plans by helping define product direction, timelines, and release milestones.
• Research customers, competitors, and market dynamics to uncover trends, unmet needs, and product opportunities.
• Work with internal teams (e.g., sales, marketing/brand, design/creative, operations, and engineering/development) to support product creation and launch readiness.
• Help document product requirements, user needs, and feature details; maintain organized records as products progress through development.
• Coordinate launch deliverables such as imagery, product content, sales enablement materials, and channel-ready assets in partnership with creative and digital teams.
• Support SKU setup, pricing/cost inputs, assortment updates, and other lifecycle activities from introduction through end-of-life.
• Track product results post-launch, summarize insights, and recommend improvements for future iterations and releases.
• Manage multiple workstreams at once, ensuring alignment on priorities, dependencies, and deadlines.

Qualifications

• 2–3 years of experience supporting product management, product development, or category management for consumer products
• Experience collaborating with technical or development teams to define and maintain product requirements and specifications.
• Bachelor’s degree in business, marketing, economics, or a related discipline
• Strong analytical skills with the ability to synthesize qualitative feedback and quantitative data into actionable insights.
• Clear written and verbal communication skills, including comfort presenting updates to stakeholders.
• Highly organized, detail-oriented, and proactive, with strong follow-through.
• Collaborative working style and ability to build productive partnerships across functions.

We have over 50 years of experience in the geotechnical and geological engineering field. With our experts, professional skilled staff, and diverse experience, we offer reliable services in an integrated, efficient, and cost-effective service to clients in the public and private sectors. Our services include Geotechnical Engineering, Geotechnical Engineering Laboratory Materials Testing, Engineering Geology, and Environmental Engineering.

We plan to expand geotechnical services and uphold our commitment to quality and client satisfaction. We are growing and looking for an experienced and motivated Project Engineer to join our team.

About the Job:

As a Project Engineer, you will be involved in the geotechnical and geological aspects of a wide variety of projects. You will play a crucial role which includes daily project management, performing and/or leading field investigations, engineering analysis, calculations, and recommendations, design, and development of plans and specifications, observation and inspection, and the writing/preparation, and review of related reports for the services provided. Review plans and drawings to ensure compliance with the project specifications. Prepare proposals and cost estimates, track and evaluate project progress and budgets, and recommend changes. Research and resolve design and construction problems. Assign, review, and evaluate laboratory or field data for report inclusion. Apply sound engineering principles and be able to communicate complex engineering issues and concepts to technical and non-technical clients and project teams.

Primary Job Duties:

• Conduct geotechnical (preliminary and forensics) and geological investigations

• Perform field inspections and testing as required for construction projects

• Analyze data and prepare geotechnical reports on soil conditions, stability, foundation design, etc.

• Collaborate with architects, engineers, and construction teams to develop effective solutions

• Provide technical guidance on geological and geotechnical related issues throughout the project lifecycle

• Ensure compliance with industry standards, regulations, and safety protocols

• Project management from the planning phase to the completion of the project

• Conduct plan reviews

• Generate cost proposals

• Participate in project meetings and communicate effectively with owners, designers and project authorities

Job Qualifications (Education, Experience, and Skills):

• Bachelor’s Degree in Civil Engineering with a focus in Geotechnical Engineering

• Minimum of 2 years of relevant professional experience

• Professional Engineer or Engineer-in-Training Certification in the state of California.

• Strong analytical and critical thinking skills and a sound technical background in soil and rock mechanics

• Attention to detail, dedication to quality and accuracy

• Experience with various commercial geotechnical software

• Strong written and oral communication skills

• Ability to work independently or as part of a team

• Working knowledge of standard business software including Microsoft Word, Excel, and PowerPoint

Key Competencies:

• Strong knowledge of geotechnical and geological engineering principles and practices

• Knowledge with the local and statewide such as the California Building Code, Los Angeles Building, California Residential Code

• Proficiency in construction inspection and management

• Ability to analyze data and interpret results

• Proficient in using software and other engineering tools related to the discipline.

• Excellent problem-solving skills and attention to detail

• Strong communication skills to collaborate with multidisciplinary teams

• Ability to read and interpret schematics and construction drawings

Senior Technical Writer / Lead (Engineering SME)

Hybrid

Irvine, CA

Role Summary

The Senior Technical Writer / Lead will serve as the primary lead for documentation quality, consistency, and coordination across validation reporting and planning activities. This individual will work closely with Auto OEM engineering teams to synthesize technical inputs into formal reports and plans while helping define future-state templates and documentation standards.

Key Responsibilities

• Lead preparation and standardization of validation test reports and test plans
• Convert raw test data and engineering inputs into accurate, structured, and professional technical documentation
• Collaborate with validation and engineering teams to gather input, clarify requirements, and ensure technical accuracy
• Establish consistency in document structure, language, terminology, and quality across deliverables
• Help develop and refine future-state reports and plan templates
• Create or coordinate technical diagrams, set up illustrations, and procedural content as required
• Guide supporting writers and minimizing ramp-up time for the extended team
• Work within Auto OEM systems and workflows, including Jira, Hex, and other internal platforms

Required Qualifications

• Bachelor’s degree in engineering or a related technical discipline
• Proven experience in technical writing within engineering, validation, testing, or product development environments
• Strong ability to interpret engineering discussions, data sets, and validation outputs
• Experience developing test reports, validation documentation, test plans, procedures, and technical templates
• Demonstrated ability to lead technical documentation workstreams or coordinate multi-resource delivery
• Strong communication, documentation, and stakeholder management skills
• Must be able to work in a hybrid onsite U.S. model

Preferred Qualifications

• Experience in automotive, EV, systems engineering, or validation environments
• Familiarity with engineering data, test setups, and documentation workflows in hardware or vehicle programs
• Experience producing diagrams, process visuals, or setup illustrations as part of technical documentation

Senior Product Designer – Softgoods (Golf Bags & Luggage)

Ghost Golf | Irvine, California | Full-Time | On-Site

Ghost Golf is one of the fastest-growing premium brands in golf. We design high-performance golf bags, accessories, and apparel for golfers who demand exceptional quality, thoughtful functionality, and modern design.

As our brand continues to grow, we are making a significant investment in expanding our golf bag and travel product categories, including the development of a complete luggage ecosystem designed specifically for the modern golf traveler.

We are seeking an experienced Senior Product Designer – Softgoods to help lead the design and development of these products. This role will focus heavily on golf bags, travel bags, and luggage, and requires deep experience in softgoods design, materials, construction, and factory development.

The ideal candidate has experience designing and bringing complex bag products to market and understands the entire process from concept to manufacturing.

This position is based in Irvine, California and requires full-time, in-office work. Remote or hybrid arrangements are not available.

Role Overview

The Senior Product Designer will play a critical role in shaping the future of Ghost Golf’s golf bag and travel product lines.

This role involves improving existing products while designing entirely new categories of bags and travel gear. The position requires a strong balance of creative design, technical product development, and factory collaboration.

You will work closely with internal teams and manufacturing partners to ensure products are designed, developed, and produced at the highest level of quality and performance.

Essential Job Duties and Responsibilities

Design and develop premium golf bags, travel bags, and luggage systems that align with the Ghost Golf brand and product standards.

Responsibilities include:

• Designing new golf bags and improving existing bag products
• Leading the design and development of a complete luggage system for golf travel, including carry-on luggage, check-in luggage, duffels, backpacks, garment bags, and travel accessories
• Translating product concepts into technical drawings and production-ready tech packs
• Selecting and sourcing materials including fabrics, trims, hardware, zippers, and structural components
• Working directly with factories to review samples, refine construction methods, and solve development challenges
• Managing the sampling and prototype process through development and pre-production
• Ensuring designs meet requirements for functionality, durability, quality, and manufacturability
• Collaborating with product, sourcing, and leadership teams throughout the development process
• Researching new materials, technologies, and manufacturing techniques relevant to softgoods design
• Managing multiple product developments while maintaining development timelines

Minimum Requirements and Qualifications

A suitable background would include the following experience and qualifications:

• Minimum 7+ years of experience designing softgoods products
• Experience designing golf bags, travel bags, luggage, or similar technical bag products
• Degree from a recognized design school (Industrial Design, Product Design, Fashion Design, or related field)
• Proven ability to create detailed tech packs for manufacturing
• Strong understanding of softgoods construction, materials, and bag engineering
• Experience working directly with overseas factories and manufacturing partners
• Strong knowledge of fabrics, trims, hardware, and bag construction techniques
• Proficiency in Adobe Illustrator and standard product development tools
• Ability to manage multiple product developments simultaneously
• Strong communication and collaboration skills

Preferred Experience

• Direct experience designing golf bags
• Experience developing luggage systems or travel collections
• Experience working with premium materials and high-end products
• Experience working with Asian manufacturing partners

Candidates without golf industry experience may still be considered if they bring exceptional experience designing luggage or technical softgoods products.

To Be Successful in This Role

The ideal candidate demonstrates:

• Deep understanding of bag design and softgoods construction
• Strong attention to detail and product execution
• Ability to balance design vision, functionality, and manufacturability
• Comfort working directly with factories to refine designs
• Passion for building exceptional products and pushing design forward

Location

This role is based in Irvine, California.

This is a full-time, in-office position.

Remote or hybrid work arrangements are not available.

How to Apply

To be considered for this role, candidates must email their application materials directly.

Please send the following to:

Include:

• Resume

• Portfolio link or PDF showcasing softgoods design work

• Examples of bags, luggage, travel gear, or similar products you have designed

Email Subject Line: Senior Softgoods Designer Application – [Your Name]

Applications submitted through LinkedIn or other job platforms without emailing the required materials will not be reviewed.