Engineering Jobs in Henderson Nv Flexible
225 positions found — Page 12
J
Mission Operations / Controller II
🏢 JT4 LLC
Salary not disclosed
Company Profile JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepare our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties The Mission Operations Controller II provides control, coordination, and direction to personnel operating system assets involved in mission activity.
The incumbent performs complex assignments with widely varying duties including the complete cycle of testing parameters as related to primary assignment, determining cause and effect relationships, reaching conclusions, and recommending solutions.
The incumbent performs with the ability to conduct a variety of tests under stressful conditions, in a constantly changing test environment.
Employee will be responsible for the following functions/duties: Conduct testing objectives with project director using applicable systems for each test Setup, operate, and monitor communications networks, computer terminals, and CRT video displays to ensure integrity of processed data Provide positive control of assets during assigned missions, both close control as wells as tactical control Conduct test from a command post and direct systems as necessary to satisfy test objectives.
Interface directly with project director and customer to ensure test objectives are met with the scheduled systems Provide interface directly with project director and customer to ensure test objectives are met with the scheduled systems Provide assistance with scheduling and administrative requirements Use established policies and procedures and subject matter knowledge to complete assignments of moderate complexity that vary in nature and sequence Perform related work as required.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is primarily sedentary in an office and operations center environment; however, some walking, stooping, bending, climbing stairs, stretching, and lifting up to 40 pounds may be required.
The incumbent must have good visual acuity and the ability to discern all colors of the spectrum.
This position may require travel.
Requirements -- Education, Technical, and Work Experience The incumbent should be a high school graduate or equivalent, graduate of a military Air Intercept Control school or Air Weapons Control school and have four years of experience controlling aircraft using close and tactical control.
This position requires six years of experience with electronic systems, radars, communications/video systems, and knowledge of their operational characteristics.
The incumbent must be familiar with testing procedures and experienced in directing the use of test assets and personnel to fulfill mission goals in an ambitious testing environment.
In addition, a Mission Operations Controller II must also possess the following qualifications: Incumbent must be familiar with testing procedures and experienced in directing the use of test assets and personnel to fulfill mission goals in an ambitious testing environment Must have good verbal and written communication skills and be experienced in the use of computer terminals Must be able to work duty days in excess of eight hours, shift work, overnight stays, and weekend work to meet required schedule demands Must have working knowledge of word processing and integrated software applications May be required to obtain and maintain a government security clearance Must possess a valid, state-issued driver's license.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepare our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties The Mission Operations Controller II provides control, coordination, and direction to personnel operating system assets involved in mission activity.
The incumbent performs complex assignments with widely varying duties including the complete cycle of testing parameters as related to primary assignment, determining cause and effect relationships, reaching conclusions, and recommending solutions.
The incumbent performs with the ability to conduct a variety of tests under stressful conditions, in a constantly changing test environment.
Employee will be responsible for the following functions/duties: Conduct testing objectives with project director using applicable systems for each test Setup, operate, and monitor communications networks, computer terminals, and CRT video displays to ensure integrity of processed data Provide positive control of assets during assigned missions, both close control as wells as tactical control Conduct test from a command post and direct systems as necessary to satisfy test objectives.
Interface directly with project director and customer to ensure test objectives are met with the scheduled systems Provide interface directly with project director and customer to ensure test objectives are met with the scheduled systems Provide assistance with scheduling and administrative requirements Use established policies and procedures and subject matter knowledge to complete assignments of moderate complexity that vary in nature and sequence Perform related work as required.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is primarily sedentary in an office and operations center environment; however, some walking, stooping, bending, climbing stairs, stretching, and lifting up to 40 pounds may be required.
The incumbent must have good visual acuity and the ability to discern all colors of the spectrum.
This position may require travel.
Requirements -- Education, Technical, and Work Experience The incumbent should be a high school graduate or equivalent, graduate of a military Air Intercept Control school or Air Weapons Control school and have four years of experience controlling aircraft using close and tactical control.
This position requires six years of experience with electronic systems, radars, communications/video systems, and knowledge of their operational characteristics.
The incumbent must be familiar with testing procedures and experienced in directing the use of test assets and personnel to fulfill mission goals in an ambitious testing environment.
In addition, a Mission Operations Controller II must also possess the following qualifications: Incumbent must be familiar with testing procedures and experienced in directing the use of test assets and personnel to fulfill mission goals in an ambitious testing environment Must have good verbal and written communication skills and be experienced in the use of computer terminals Must be able to work duty days in excess of eight hours, shift work, overnight stays, and weekend work to meet required schedule demands Must have working knowledge of word processing and integrated software applications May be required to obtain and maintain a government security clearance Must possess a valid, state-issued driver's license.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Not Specified
J
2026 JT4 Systems Administrator Opportunities - All Locations
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.
S.
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**Positions are currently available in Las Vegas, NV and Lancaster, CA JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Evaluates system specifications, installs enterprise computer systems, configures systems, establishes standards, insures hardware/software compatibility and maintains workstations and server systems focusing on the Operating system and the network.
Works as a team member on projects and tasks providing computer hardware and operating system solutions for the team or task.
Performs the daily operational support on the computer Operating System to include system security, access, configuration, backups and restores.
Specifies network requirements, monitors LAN performance, troubleshoots networking hardware and insures system is working properly according to specifications and parameters.
Organizes and secures directory structure and assists/trains staff members in the use of department Document Management Systems, associated databases and CM/DM release procedures.
Maintains and designs functional, visually esthetic web pages.
Specifies hardware requirements and provides Computer Authorization and custodial receipt listings to track equipment configurations and identification logs Serves as POC for problem reporting, incremental version updates and monitors yearly support contracts.
Makes recommendations for future hardware/software implementations and related process improvements, schedules, plans and performs system upgrades including the transition from design, test, production and documentation environments.
Provides operational status as required.
Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution.
Analyzing system logs and identifying potential issues with computer systems.
Manage and administer storage solutions including NAS and SAN systems.
Research, integrate, or place new technologies into the existing data center.
Other duties as required.
OTHER RESPONSIBILITIES Will be asked to make functional the initiatives established by management and will coordinate with other organizations as affected by upgrades, capabilities, policy and procedures.
Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE Level VI A bachelor's degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 15 years of experience in computer system related areas of expertise and must possess anda pply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Level V Bachelors Degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 12 years of experience in computer system related areas of expertise.
Must possess and apply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Must have specific experience in the maintenance of Operating Systems and support applications, in a centralized and distributed server environment.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level IV Bachelors Degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 9 years of experience in computer system related areas of expertise.
Must possess and apply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Must have specific experience in the maintenance of Operating Systems and support applications, in a centralized and distributed server environment.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level III Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training.
Possess 7 years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess and apply a broad knowledge of principles, practices and procedures in computer science, graphics, and information systems.
Must have specific experience in the use of MS window server environments and various CAD/CAM, database, MS Office and Web enabled applications The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Must be capable of updating or repairing computer systems.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level II Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training.
Possess 5 years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess and apply a broad knowledge of principles, practices and procedures in computer science, graphics, and information systems.
Must have specific experience in the use of MS window server environments and various CAD/CAM, database, MS Office and Web enabled applications.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Must be capable of updating or repairing computer systems.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level I Associates or higher degree in Information Technology, or equivalent academic/technical training.
Possess 3 years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess a basic knowledge of principles, practices and procedures in computer science, graphics, and information systems.
Must have specific experience in the use of MS window server environments and various CAD, database, MS Office and Web enabled applications.
Must be capable of updating or repairing computer systems.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.
S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JIT13; CSAN6: JCORP12
S.
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**Positions are currently available in Las Vegas, NV and Lancaster, CA JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Evaluates system specifications, installs enterprise computer systems, configures systems, establishes standards, insures hardware/software compatibility and maintains workstations and server systems focusing on the Operating system and the network.
Works as a team member on projects and tasks providing computer hardware and operating system solutions for the team or task.
Performs the daily operational support on the computer Operating System to include system security, access, configuration, backups and restores.
Specifies network requirements, monitors LAN performance, troubleshoots networking hardware and insures system is working properly according to specifications and parameters.
Organizes and secures directory structure and assists/trains staff members in the use of department Document Management Systems, associated databases and CM/DM release procedures.
Maintains and designs functional, visually esthetic web pages.
Specifies hardware requirements and provides Computer Authorization and custodial receipt listings to track equipment configurations and identification logs Serves as POC for problem reporting, incremental version updates and monitors yearly support contracts.
Makes recommendations for future hardware/software implementations and related process improvements, schedules, plans and performs system upgrades including the transition from design, test, production and documentation environments.
Provides operational status as required.
Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution.
Analyzing system logs and identifying potential issues with computer systems.
Manage and administer storage solutions including NAS and SAN systems.
Research, integrate, or place new technologies into the existing data center.
Other duties as required.
OTHER RESPONSIBILITIES Will be asked to make functional the initiatives established by management and will coordinate with other organizations as affected by upgrades, capabilities, policy and procedures.
Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE Level VI A bachelor's degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 15 years of experience in computer system related areas of expertise and must possess anda pply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Level V Bachelors Degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 12 years of experience in computer system related areas of expertise.
Must possess and apply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Must have specific experience in the maintenance of Operating Systems and support applications, in a centralized and distributed server environment.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level IV Bachelors Degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 9 years of experience in computer system related areas of expertise.
Must possess and apply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Must have specific experience in the maintenance of Operating Systems and support applications, in a centralized and distributed server environment.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level III Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training.
Possess 7 years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess and apply a broad knowledge of principles, practices and procedures in computer science, graphics, and information systems.
Must have specific experience in the use of MS window server environments and various CAD/CAM, database, MS Office and Web enabled applications The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Must be capable of updating or repairing computer systems.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level II Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training.
Possess 5 years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess and apply a broad knowledge of principles, practices and procedures in computer science, graphics, and information systems.
Must have specific experience in the use of MS window server environments and various CAD/CAM, database, MS Office and Web enabled applications.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Must be capable of updating or repairing computer systems.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
Level I Associates or higher degree in Information Technology, or equivalent academic/technical training.
Possess 3 years related experience or combination of experience in computer system basics and/or related areas of expertise.
Must possess a basic knowledge of principles, practices and procedures in computer science, graphics, and information systems.
Must have specific experience in the use of MS window server environments and various CAD, database, MS Office and Web enabled applications.
Must be capable of updating or repairing computer systems.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
Must qualify for and maintain a government security clearance and possess a valid, state issued driver's license.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.
S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JIT13; CSAN6: JCORP12
Not Specified
J
2026 JT4 Engineer Opportunities in Las Vegas, NV
🏢 JT4 LLC
Salary not disclosed
JT4 provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
We develop and maintain realistic integrated test and training environments, and prepare our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES JT4 is seeking entry level to senior level engineers for career opportunities in broad and diverse fields with career advancement.
JT4 is the Prime Contractor delivering engineering and technical services to develop and test leading-edge technologies for our nation's aircraft weapon systems and aircrews across open air test ranges.
Engineering disciplines that align with ongoing technical services include aeronautical, analog and digital electronics, computer, digital signal processing, electromagnetics, mechanical, RF (air and ground-based), software, structures, systems, and telecommunications.
All engineering disciplines will be considered for employment opportunities.
Engineers will research, design, develop, integrate, test, and sustain engineering solutions and products to support the tactics and testing of war-fighting systems.
Strong mathematical skills, logic and the ability to rise and achieve successes will make you a solid candidate.
All positions under this requisitions are located in Las Vegas, Nevada.
Responsibilities vary from entry level engineering problems to leading teams in solving complex technical projects.
Examples of job responsibilities are: Plan, conduct, and technically direct projects or major phases of significant projects requiring the expert application of advanced knowledge Develop and apply advanced methods, theories, and research techniques in the investigation and solution of complex and difficult system design requirements and problems.
Develop data collection requirements, instrumentation possibilities, and analysis capabilities Use industry-wide applications as well as unique software to develop project tools for analysis and modeling of attributes of the engineering task Directly interface with internal and external customers at all levels from quotation to final design and test activities, design reviews, and technical working group meetings to comply with requirements and specifications Develop solutions for complex EW, RF, and communication protocol test problems Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Represent the Company as technical advisor in high-level meetings and briefings with Company and customer personnel Be recognized as a Company/industry expert on the most complex engineering problems Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendations Be able to remain flexible in the face of rapidly changing schedules Be able to work well with military and civil service team partners and articulate ideas in a diverse discipline environment REQUIREMENTS Applicants must have an Engineering degree from an ABET accredited program.
US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required.
Applicants must have a valid state-issued driver's license.
Minimum requirements/experience for each level Engineer listed below: Engineer I: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution.
Engineer II: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution with 2 years of related engineering experience, or have an accredited Master of Science in Engineering.
Engineer III: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience, or have an accredited doctoral degree in Engineering.
Engineer IV: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience.
Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience.
Engineer VI: The candidate must have a Master of Science in Engineering from an ABET accredited academic institution and 16 years of related engineering experience, or an accredited doctorate degree in engineering and a minimum of 12 years of related engineering experience.
DESIRED QUALIFICATIONS Former military or Government experience desired.
Open-air RF or closed-loop protocol testing preferred for most positions.
Software Development and testing experience desired for some positions.
OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting up to 20 pounds, constant sitting with occasional use of a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17; JCORP12
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
We develop and maintain realistic integrated test and training environments, and prepare our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES JT4 is seeking entry level to senior level engineers for career opportunities in broad and diverse fields with career advancement.
JT4 is the Prime Contractor delivering engineering and technical services to develop and test leading-edge technologies for our nation's aircraft weapon systems and aircrews across open air test ranges.
Engineering disciplines that align with ongoing technical services include aeronautical, analog and digital electronics, computer, digital signal processing, electromagnetics, mechanical, RF (air and ground-based), software, structures, systems, and telecommunications.
All engineering disciplines will be considered for employment opportunities.
Engineers will research, design, develop, integrate, test, and sustain engineering solutions and products to support the tactics and testing of war-fighting systems.
Strong mathematical skills, logic and the ability to rise and achieve successes will make you a solid candidate.
All positions under this requisitions are located in Las Vegas, Nevada.
Responsibilities vary from entry level engineering problems to leading teams in solving complex technical projects.
Examples of job responsibilities are: Plan, conduct, and technically direct projects or major phases of significant projects requiring the expert application of advanced knowledge Develop and apply advanced methods, theories, and research techniques in the investigation and solution of complex and difficult system design requirements and problems.
Develop data collection requirements, instrumentation possibilities, and analysis capabilities Use industry-wide applications as well as unique software to develop project tools for analysis and modeling of attributes of the engineering task Directly interface with internal and external customers at all levels from quotation to final design and test activities, design reviews, and technical working group meetings to comply with requirements and specifications Develop solutions for complex EW, RF, and communication protocol test problems Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Represent the Company as technical advisor in high-level meetings and briefings with Company and customer personnel Be recognized as a Company/industry expert on the most complex engineering problems Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendations Be able to remain flexible in the face of rapidly changing schedules Be able to work well with military and civil service team partners and articulate ideas in a diverse discipline environment REQUIREMENTS Applicants must have an Engineering degree from an ABET accredited program.
US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required.
Applicants must have a valid state-issued driver's license.
Minimum requirements/experience for each level Engineer listed below: Engineer I: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution.
Engineer II: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution with 2 years of related engineering experience, or have an accredited Master of Science in Engineering.
Engineer III: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience, or have an accredited doctoral degree in Engineering.
Engineer IV: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience.
Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience.
Engineer VI: The candidate must have a Master of Science in Engineering from an ABET accredited academic institution and 16 years of related engineering experience, or an accredited doctorate degree in engineering and a minimum of 12 years of related engineering experience.
DESIRED QUALIFICATIONS Former military or Government experience desired.
Open-air RF or closed-loop protocol testing preferred for most positions.
Software Development and testing experience desired for some positions.
OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting up to 20 pounds, constant sitting with occasional use of a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17; JCORP12
Not Specified
J
Radio Field Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY -- ESSENTIAL FUNCTIONS/DUTIES Under general supervision of a senior-level engineer, a Field Engineer IV performs a variety of fundamental field engineering tasks involved in the installation, operations, testing, and maintenance of electronic equipment and systems.
Employee will be responsible for performing the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to engineering specialty Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist in preparation of reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings HF/UHF/VHF ground-to-air radio communications equipment.
Switches, routers and networking equipment.
Cable television systems to include head-ends building and television installation and troubleshooting.
P25 Land Mobile Radio Systems and repeaters.
Air Traffic Control operations centers.
Navigation ground systems to include ILS/VOR/TACANS.
Metrological/Weather systems.
Must have excellent technical skills.
Must have a willingness to perform field maintenance duties.
DESIRED QUALIFICATIONS Understanding of Radio Frequency (RF) transmission principals.
Ability to use basic test equipment.
General electronics, electro-mechanical, and computer systems.
Understanding basic networking technology and telecommunications technologies.
Knowledge in CISCO communications equipment.
ISCET certification may be required.
Associate or technical school with courses in math, basic electronics.
Excellent technical skills.
REQUIREMENTS -- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 12 years of experience in the specialty field are required for this position.
In addition, a Field Engineer IV must possess the following qualifications: Broad knowledge of concepts, principles, and practices of engineering that enable performance as a senior technical contributor on complex projects or programs Knowledge and skill sufficient to apply developments in engineering to solve problems in the specialty area Working knowledge of computer systems and integrated software application programs Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match 4% Match with 8% Contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; JCORP12 #LI-IA1
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY -- ESSENTIAL FUNCTIONS/DUTIES Under general supervision of a senior-level engineer, a Field Engineer IV performs a variety of fundamental field engineering tasks involved in the installation, operations, testing, and maintenance of electronic equipment and systems.
Employee will be responsible for performing the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to engineering specialty Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist in preparation of reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings HF/UHF/VHF ground-to-air radio communications equipment.
Switches, routers and networking equipment.
Cable television systems to include head-ends building and television installation and troubleshooting.
P25 Land Mobile Radio Systems and repeaters.
Air Traffic Control operations centers.
Navigation ground systems to include ILS/VOR/TACANS.
Metrological/Weather systems.
Must have excellent technical skills.
Must have a willingness to perform field maintenance duties.
DESIRED QUALIFICATIONS Understanding of Radio Frequency (RF) transmission principals.
Ability to use basic test equipment.
General electronics, electro-mechanical, and computer systems.
Understanding basic networking technology and telecommunications technologies.
Knowledge in CISCO communications equipment.
ISCET certification may be required.
Associate or technical school with courses in math, basic electronics.
Excellent technical skills.
REQUIREMENTS -- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 12 years of experience in the specialty field are required for this position.
In addition, a Field Engineer IV must possess the following qualifications: Broad knowledge of concepts, principles, and practices of engineering that enable performance as a senior technical contributor on complex projects or programs Knowledge and skill sufficient to apply developments in engineering to solve problems in the specialty area Working knowledge of computer systems and integrated software application programs Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match 4% Match with 8% Contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; JCORP12 #LI-IA1
Not Specified
J
Space and Cyber Operations/Test Analyst
🏢 JT4 LLC
Salary not disclosed
Company Profile JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Assists in developmental and operational testing of internal and external customer systems.
Interface between instrumentation engineers and test customers to ensure that parametric data required is available for test data analysis and accurately reflects the system configuration and operational characteristics.
Employee will be responsible to perform the following functions/duties: Provide organization to small project teams Contribute knowledge on the test process Provide knowledge on EW, RF or Protocols Suggest improvements to processes and procedures to obtain efficiencies Develop basic data analysis tools, processes, or products for analysis Analyze pre-test predictions to define data collection requirements Assist in the conduct of test activities from control centers Order, QC and analyze data; Identify and resolve basic data anomalies; Present test findings Assist in authoring final test products Provide other related support as requested.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position is performed in a typical office environment with no unusual hazards.
There is occasional lifting up to (20) pounds, constant sitting while using a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadline.
Requirements -- Education, Technical, and Work Experience Completion of technical training and seven years of related experience; or an associate degree and four years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics) and two years of related experience; or a related Master's degree.
The incumbent must understand concepts, principles, and practices of engineering and analysis to enable the employee to serve as a technical authority on projects relating to the specific programs.
The position requires knowledge and skill sufficient to apply the latest developments in technology to solve problems in the specialty area.
In addition, an Operations/Test Analyst II must possess the following qualifications: Must maintain excellent communications and analytical skills Must possess working knowledge of computer systems and integrated software application programs Must qualify for and maintain a government security clearance Must possess a valid state-issued driver's license.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JCORP12; JOTDA18
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Assists in developmental and operational testing of internal and external customer systems.
Interface between instrumentation engineers and test customers to ensure that parametric data required is available for test data analysis and accurately reflects the system configuration and operational characteristics.
Employee will be responsible to perform the following functions/duties: Provide organization to small project teams Contribute knowledge on the test process Provide knowledge on EW, RF or Protocols Suggest improvements to processes and procedures to obtain efficiencies Develop basic data analysis tools, processes, or products for analysis Analyze pre-test predictions to define data collection requirements Assist in the conduct of test activities from control centers Order, QC and analyze data; Identify and resolve basic data anomalies; Present test findings Assist in authoring final test products Provide other related support as requested.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position is performed in a typical office environment with no unusual hazards.
There is occasional lifting up to (20) pounds, constant sitting while using a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadline.
Requirements -- Education, Technical, and Work Experience Completion of technical training and seven years of related experience; or an associate degree and four years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics) and two years of related experience; or a related Master's degree.
The incumbent must understand concepts, principles, and practices of engineering and analysis to enable the employee to serve as a technical authority on projects relating to the specific programs.
The position requires knowledge and skill sufficient to apply the latest developments in technology to solve problems in the specialty area.
In addition, an Operations/Test Analyst II must possess the following qualifications: Must maintain excellent communications and analytical skills Must possess working knowledge of computer systems and integrated software application programs Must qualify for and maintain a government security clearance Must possess a valid state-issued driver's license.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JCORP12; JOTDA18
Not Specified
S
Front-end Development Engineer- Digital Standards Guide (DSG) Team (Hybrid)
🏢 Securian
Salary not disclosed
*At Securian Financial the internal position title is Engineering Sr Analyst, Engineering Analyst, or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Summary:
The Digital Standards Guide (DSG) team is responsible for the development, maintenance, and evolution of Securian's enterprise design system - delivering reusable, accessible, and brandaligned UI components used across digital experiences. Our work enables consistency, efficiency, and highquality user experiences by partnering closely with UX, design, accessibility, and product teams. We support the full lifecycle of components, from discovery and design through development, testing, accessibility validation, and documentation.
We are seeking a FrontEnd Development Engineer who is passionate about building accessible, scalable, and usercentered interfaces. In this role, you will develop and support DSG components and patterns that empower product teams across the organization. You will work closely with design, accessibility consultants, and product partners to ensure solutions meet brand standards, usability best practices, and technical excellence.
Responsibilities include but not limited to:
Develop, test, review, and maintain frontend components and patterns using HTML, CSS/Sass, JavaScript, and ARIA to meet accessibility standards.
Build reusable, flexible, and scalable UI components and patterns aligned to DSG guidelines and Securian's brand.
Support the component lifecycle, including intake, development, QA, accessibility audit, iteration, and release.
Collaboration & Partnership
Work closely with UX designers, accessibility specialists, analytics partners, and product teams to build solutions that meet user needs.
Participate in design reviews, provide engineering perspective, and advise teams adopting DSG components.
Partner with product teams to identify improvements and ensure successful implementation across applications.
Documentation & Guidance
Contribute to technical documentation, usage guidance, best practices, and migration/support materials for developers and designers.
Assist in maintaining and improving internal DSG resources, including documentation sites and onboarding materials.
Continuous Improvement
Stay up to date on modern frontend standards, accessibility guidelines, and design system best practices.
Identify opportunities to enhance component quality, performance, scalability, and accessibility.
Qualifications:
2+ years of experience with frontend development using HTML, CSS/Sass, and JavaScript.
Strong understanding of semantic markup, accessibility fundamentals, and ARIA.
Experience building reusable, maintainable frontend components or UI patterns.
Proficiency with version control systems (preferably Git, GitHub).
Ability to selfmanage workload, prioritize tasks, and meet deadlines with minimal supervision.
Clear verbal and written communication skills; strong collaboration mindset.
Creative problemsolver with a resultsoriented approach.
Preferred Qualifications:
Experience with design systems or component library development.
Knowledge of WCAG 2.x guidelines and experience writing Level AAcompliant code.
Experience with modern build tools such as npm,Webpack, Rollup, or Vite.
Familiarity with Adobe Experience Manager (AEM).
Experience writing automated tests (unit, visual regression, accessibility).
Experience with CSS preprocessors or frameworks (LESS, Sass).
Familiarity with Web Components and componentdriven architectures.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Not Specified
QA Automation Engineer
$90,000 - $111,000 per annum
Job Description
Remote working/work at home options are available for this role.
Pecan POS is seeking a skilled and detail-oriented QA Automation Engineer to join our growing engineering team. In this role, you will be responsible for designing, developing, and maintaining automated testing frameworks to ensure the reliability, performance, and scalability of our point-of-sale (POS) platform used by hospitality businesses.
You will collaborate closely with software engineers, product managers, and QA specialists to improve software quality, reduce regression risk, and support continuous integration and delivery. This is an excellent opportunity to contribute to a fast-paced environment where quality and innovation are critical to delivering reliable transaction systems.
ResponsibilitiesDesign, develop, and maintain automated test frameworks for web and API testing
Create and execute automated regression, integration, and end-to-end tests
Collaborate with developers and product teams to define test strategies and acceptance criteria
Identify, document, and track defects through resolution
Integrate automated tests into CI/CD pipelines to support continuous delivery
Perform API testing and validate system integrations
Conduct root cause analysis and contribute to quality improvements
Maintain test environments and test data for consistent automation execution
Participate in code reviews and support quality engineering best practices
Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience)
3+ years of experience in software testing and automation
Strong experience with automation tools such as Selenium, Cypress, Playwright, or similar frameworks
Experience with API testing tools such as Postman or RestAssured
Familiarity with programming languages such as Java, Python, JavaScript, or C#
Experience with SQL and database validation
Understanding of Agile development and the software testing lifecycle
Experience with version control systems such as Git
Strong problem-solving and analytical skills
Experience testing POS systems, fintech platforms, or payment processing systems
Experience with CI/CD tools such as Jenkins, GitHub Actions, or GitLab CI
Familiarity with cloud environments (AWS, Azure, or GCP)
Experience with performance testing tools such as JMeter or k6
Fully remote work environment
Competitive salary
Opportunity to work on mission-critical transaction systems
Collaborative engineering-focused culture
Professional development and growth opportunities
Remote working/work at home options are available for this role.
permanent
D
Quality Engineer 2 - Remote
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Not Specified
D
Senior Engineer, Global Services - Hybrid
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
D
Sr Software Quality Engineer - Remote
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Hema at (63 or Sri at (63 Title: Sr Software Quality Engineer
- Remote Duration: 6 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality and maintenance of products, equipment, systems and processes and develop quality standards.
A typical quality engineer has the ability to read and interpret blueprints, and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes program to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative application.
Skills: Creativity, verbal and written communication skills, analytical and problem solving ability.
Team player and detail oriented.
Basic ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports.
Basic experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Team Player, computer applications, Computer Aided Design (CAD), Creativity
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Hema at (63 or Sri at (63 Title: Sr Software Quality Engineer
- Remote Duration: 6 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality and maintenance of products, equipment, systems and processes and develop quality standards.
A typical quality engineer has the ability to read and interpret blueprints, and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes program to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative application.
Skills: Creativity, verbal and written communication skills, analytical and problem solving ability.
Team player and detail oriented.
Basic ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports.
Basic experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Team Player, computer applications, Computer Aided Design (CAD), Creativity
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded