Engineering Jobs in Hatfield, PA

• 
  Performs patient procedures within the nursing scope of practice.
  

• 
  Practices safe medication administration and assesses patient responses to medication.
  

• 
  Participates in reviewing and/or implementing clinical pathways and care coordination.
  

• 
  BSN Degree p referred
  

• 
  State Issued RN license
  

• 
  Basic Life Support (BLS) certification from the American Heart Association
  
• 
  ICU experience strongly preferred
  

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See Jefferson Health Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

• 
  Performs patient procedures within the nursing scope of practice.
  

• 
  Practices safe medication administration and assesses patient responses to medication.
  

• 
  Participates in reviewing and/or implementing clinical pathways and care coordination.
  

• 
  BSN Degree p referred
  

• 
  State Issued RN license
  

• 
  Basic Life Support (BLS) certification from the American Heart Association
  
• 
  ICU experience strongly preferred
  

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See Jefferson Health Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Jefferson Einstein Montgomery Hospital | East Norriton, PA

Sign-On Bonus

Job Description Summary

Jefferson Einstein Montgomery Hospital (JEMH) is seeking a fellowship-trained Radiologist to join our Radiology Department and further enhance the comprehensive imaging services provided to our patients. This role offers the opportunity to practice in a modern, technologically advanced environment within a collegial and high-performing health system.

Jefferson Einstein Hospital proudly carries forward a legacy of excellence established in 1866. Today, we remain deeply committed to delivering compassionate, high-quality care while continuing to lead through innovation across the Greater Philadelphia region.

Jefferson Einstein Hospital continues to invest in its physicians through a newly revised compensation plan and a system-wide implementation of Sectra PACS in 2026, reinforcing our commitment to innovation, efficiency, and radiologist satisfaction.

Summary of Responsibilities

• Interpret a broad range of diagnostic imaging studies, including MRI, CT, ultrasound, and X-ray, with a focus on body imaging
• Provide accurate, timely, and high-quality radiologic interpretations to support patient diagnosis and treatment planning
• Collaborate closely with referring physicians and multidisciplinary healthcare teams
• Maintain proficiency in evolving imaging technologies, protocols, and best practices

Compensation & Benefits

• Newly revised compensation plan offering competitive base salary with performance-based incentives
• Sign-on bonus, paid within the first month
• Full comprehensive benefits package
• Medical, dental, and vision insurance
• Retirement plans: Pension, 403(b), 457, and structured portfolio investment options
• PTO
• CME
• Short and Long-term disability coverage
• Malpractice insurance with tail
• Life insurance

About Jefferson

Nationally ranked Jefferson Health is a leading not-for-profit academic health system headquartered in the Greater Philadelphia region, with a broad presence across Pennsylvania, New Jersey, and the Lehigh Valley. With a workforce of more than 65,000 team members, Jefferson is dedicated to delivering high-quality, compassionate patient care; strengthening the communities it serves; educating the next generation of healthcare leaders; and advancing innovation through clinical and applied research.

Thomas Jefferson University, founded in 1824, is home to Sidney Kimmel Medical College, Jefferson College of Nursing, and the Kanbar College of Design, Engineering and Commerce. Today, the University encompasses 10 colleges and three schools, offering more than 200 undergraduate and graduate programs to over 8,300 students.

Jefferson Health is consistently recognized as one of the top 15 not-for-profit healthcare systems in the United States, serving millions of patient encounters annually across 32 hospital campuses and more than 700 outpatient and urgent care locations. Jefferson Health Plans further extends Jefferson’s mission as a not-for-profit managed care organization serving Pennsylvania and New Jersey for more than 35 years.

Equal Opportunity Statement

Jefferson is committed to providing equal educational and employment opportunities for all individuals and does not discriminate based on age, race, color, religion, creed, sexual orientation, gender, gender identity, marital status, pregnancy, national origin, ancestry, citizenship, military or veteran status, disability, or any other legally protected status.

Join Jefferson Health — where your career, your voice, and your impact truly matter.

Learn more, apply today!

Jason Kendall

Talent Acquisition Partner, Physician Recruitment

Thomas Jefferson University and Jefferson Health

T (314) 327-4574 cell/text |

| |

Senior Commissioning & Qualification Engineer – Automation (Biopharma Build)

Owner’s Representative | Onsite – Spring House, PA

Contract through end of year, potential for ongoing extensions

We are seeking a senior Commissioning & Qualification (C&Q) Automation SME to support the delivery of a state-of-the-art Cell & Gene Therapy manufacturing facility.

This is a high-visibility, onsite role where you will serve as the Owner’s Representative, ensuring highly automated GMP process systems are properly commissioned, integrated, and inspection-ready. If you thrive in complex, automation-heavy capital projects, this is the type of build that defines careers.

What You’ll Be Doing

• Act as the technical SME for commissioning automated process equipment
• Represent the owner’s interests across all project phases
• Lead execution of Commissioning Plans with emphasis on automation, integration, and data integrity
• Author and review IQ/OQ/PQ protocols, URS, and validation documentation
• Oversee startup and field execution for complex equipment platforms
• Drive resolution of automation-related deviations and integration issues
• Coordinate across automation, construction, validation, quality, and vendor teams
• Apply risk-based qualification principles (ASTM E2500, FMEA)
• Ensure compliance with GMP, FDA, and 21 CFR Part 11
• Support digital validation platforms (e.g., Kneat)

Equipment & Systems Scope

• Cell & gene therapy manufacturing systems
• Fill/Finish lines
• Isolators
• Integrated process equipment platforms
• PLC / SCADA / DCS automation layers

What We’re Looking For

Required:

• Bachelor’s degree in Engineering or Life Sciences
• 5–10 years of CQV experience in automated biopharma manufacturing
• Hands-on experience with process equipment and control systems
• Strong understanding of GMP validation lifecycle

Strongly Preferred:

• DeltaV, Rockwell, Siemens, or similar DCS/PLC platforms
• Experience in greenfield or large capital projects
• ASTM E2500 / GAMP 5 knowledge
• Experience with digital validation tools (Kneat, Veeva)
• Background in cell & gene therapy, fill/finish, or cleanroom environments

Why This Role?

• High-impact, automation-heavy greenfield project
• Owner-side authority and visibility
• Complex, integrated GMP systems
• Opportunity to shape commissioning strategy at a flagship facility

EEO Statement:

• Eight Eleven Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, national origin, age, sex, citizenship, disability, genetic information, gender, sexual orientation, gender identity, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state, and local laws.

Pengate Handling Systems is a full-service provider of material handling equipment and solutions, helping businesses move, store, and manage products more efficiently. We design, build, and install conveyors, automation systems, and custom storage solutions tailored to each client’s operational needs. Our projects improve workflow, boost productivity, and enhance safety, delivering real, measurable results. With expertise across industries, we combine engineering know-how with hands-on experience to create systems that solve complex challenges and keep businesses running smoothly.

We are seeking a results-driven Optimization Specialist to drive operational excellence across our field operations. This role champions Lean methodologies, streamlines processes, and improves cross-functional performance while delivering measurable business impact.

What You’ll Do

• Lead Lean initiatives using tools such as Kaizen, 5 Why analysis, Process Mapping, 5S, Gemba walks, PDCA, Value Stream Mapping, A3, and Root Cause Analysis.
• Conduct process assessments, identify opportunities for improvement, and implement sustainable solutions.
• Partner with leaders across Service, Dispatch, Parts, Rental, and Logistics to streamline workflows and eliminate bottlenecks.
• Standardize processes, develop staffing and resource forecasts, and optimize utilization.
• Analyze operational data to uncover trends, measure performance, and drive continuous improvement initiatives.
• Lead root cause analyses to resolve operational challenges and prevent recurrence.
• Sponsor and oversee optimization projects with defined metrics, measurable ROI, and clear success criteria.
• Strengthen cross-functional communication and collaboration to improve alignment and workflow integration.
• Implement best practices for workflow efficiency, resource allocation, and process standardization.
• Develop dashboards, KPIs, and reporting frameworks to monitor performance and guide strategic decisions.
• Mentor and influence teams to adopt Lean thinking, operational discipline, and problem-solving mindset.
• Support change management initiatives and promote a culture of continuous learning and improvement.

What We’re Looking For

• Bachelor’s degree in Business, Operations, Logistics, or a related field.
• 3+ years of operational experience, preferably in service-based or field operations.
• Proven success improving fleet utilization and driving cross-department collaboration.
• Experience with dispatch systems, fleet tracking tools, and operational metrics.
• Strong analytical skills with the ability to interpret data, identify trends, and develop actionable insights.
• Excellent problem-solving and decision-making abilities, including root cause analysis.
• Expertise in Lean methodologies, continuous improvement, and process optimization.
• Strong project management skills with the ability to prioritize and manage multiple initiatives simultaneously.
• Exceptional organizational skills and attention to detail.
• Effective communicator capable of presenting ideas clearly to both technical and non-technical audiences.

Why Work at Pengate

• Join a team that values innovation, collaboration, and continuous improvement.
• Work in an environment where your ideas are heard and make an impact.
• Lead meaningful projects and contribute to operational excellence across the organization.
• Grow your skills through opportunities in Lean practices, data-driven decision making, and process optimization.
• Be part of a company that recognizes and celebrates success, both individually and as a team.
• Thrive in a culture that fosters professional development and continuous learning.

Benefits

• Competitive salary and performance-based incentives.
• Comprehensive medical, dental, and vision insurance.
• 401(k) plan with company match.
• Paid time off and company holidays.
• Opportunities for professional development, training, and certifications.
• Supportive and collaborative work environment.

Pengate Handling Systems is dedicated to being an Equal Opportunity Employer. We promote and celebrate a diverse workforce and do not tolerate any discrimination. All human relations decisions will not be based on persons’ race, color, religion, sex, national original, marital status, disability, genetic information, age, veteran status, or citizenship. All potential hires are subject to pre-employment checks which include but are not limited to background checks and drug screenings. In addition, we will provide reasonable accommodations for individuals with disabilities. Should you require an accommodation in completing an application, interview, or pre-employment requirement, please reach out to our Talent Acquisition team at

About Precis

Precis Engineering + Architecture (Precis) is a 150+ person consulting firm with offices in Ambler, Pa., and Cary, N.C., offering comprehensive design services. Precis has been repeatedly recognized as a Best Place to Work by the Philadelphia Business Journal.

Description:

Precis Engineering + Architecture (Precis) ( ) offers comprehensive design services to our clients in the pharmaceutical, biotechnology, higher education, industrial, commercial, critical utility, and healthcare markets. Together, we design and create important buildings, facilities, and environments that improve and save lives.

Precis is recognized for our design expertise and proficiency in providing strategically sensitive and technically complex engineering and architectural services. The Mechanical Department is regularly engaged in a broad spectrum of projects that require creative solutions to challenging building systems and utility issues. This offers an excellent environment for employees to rapidly expand their knowledge and understanding of the key role engineering plays in the success of building renovations and new construction projects.

Precis is currently seeking a Senior Mechanical Engineer for our Ambler, PA office. This individual must have a background in Mechanical/HVAC Engineering and a basic understanding of engineering practice within highly regulated industries. We are looking for a resourceful and goal-oriented individual who desires challenging work in a dynamic environment.

Responsibilities:

• Provide mechanical engineering services to design and oversee the design of complete mechanical/HVAC systems supporting facility expansions, renovations, remediation, and new construction projects from concept through detailed design and construction, including equipment, ductwork, piping, building automation, and related building components.
• Receive supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters. Receive direction on unusual conditions and developments.
• Independently apply extensive and diversified knowledge and use advanced techniques in the modification or extension of standard procedures and design criteria to complete assignments, including the development of details, control sequences, and specifications. Assist upper-level management to develop new techniques and improve standards and processes.
• Supervise all staff necessary to complete project assignments in alignment the defined scopes, schedules, and budgets. Provide thorough review of project documents for conformity with project assignments and quality assurance.
• Interact with client representatives, equipment vendors, contractors, project managers, and other project team members to coordinate deliverables and breadth of the mechanical design.
• Periodically visit project sites to survey existing conditions and observe construction activities.

Requirements:

• Bachelor of Science degree in Mechanical or Architectural Engineering
• Minimum 8 years industry engineering experience
• Strong computer literacy with advanced knowledge and use of Excel, Word, Outlook, and Teams
• Advanced written & verbal communication skills
• Advanced knowledge of applicable codes and industry standards and guidelines
• Experience with critical environments and related building systems
• Professional Engineer license

Why Join Precis?

• Be part of a collaborative, innovative team that values your ideas and expertise.
• Shape growth for a respected, specialized engineering and architecture firm.
• Enjoy a flexible, supportive work environment and competitive compensation package.

Equal Opportunity Employer

Precis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.

About Precis

Precis Engineering + Architecture (Precis) is a 150+ person consulting firm with offices in Ambler, Pa., and Cary, N.C., offering comprehensive design services. Precis has been repeatedly recognized as a Best Place to Work by the Philadelphia Business Journal.

Description:

Precis Engineering + Architecture (Precis) ( ) offers comprehensive design services to our clients in the pharmaceutical, biotechnology, higher education, industrial, commercial, critical utility, and healthcare markets. Together, we design and create important buildings, facilities, and environments that improve and save lives.

Precis is recognized for our design expertise and proficiency in providing strategically sensitive and technically complex engineering and architectural services. The Plumbing Department is regularly engaged in a broad spectrum of projects that require creative solutions to challenging building systems and utility issues. This offers an excellent environment for employees to rapidly expand their knowledge and understanding of the key role engineering plays in the success of building renovations and new construction projects.

Precis is currently seeking a Senior Plumbing Engineer for our Ambler, PA office. This individual must have a background in Plumbing Engineering and a basic understanding of engineering practice within highly regulated industries. We are looking for a resourceful and goal-oriented individual who desires challenging work in a dynamic environment.

Responsibilities:

• Provide plumbing engineering services to design and oversee the design of complete plumbing systems supporting facility expansions, renovations, remediation, and new construction projects from concept through detailed design and construction, including equipment, piping, and related building components.
• Receive supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters. Receive direction on unusual conditions and developments. Independently apply extensive and diversified knowledge and use advanced techniques in the modification or extension of standard procedures and design criteria to complete assignments, including the development of details, and specifications. Assist upper-level management to develop new techniques and improve standards and processes.
• Supervise all staff necessary to complete project assignments in alignment the defined scopes, schedules, and budgets. Provide thorough review of project documents for conformity with project assignments and quality assurance.
• Interact with client representatives, equipment vendors, contractors, project managers, and other project team members to coordinate deliverables and breadth of the plumbing design.
• Periodically visit project sites to survey existing conditions and observe construction activities.

Requirements:

• Bachelor of Science degree in Mechanical or Architectural Engineering, or an Associate degree in a related field.
• Minimum 8 years of industry engineering experience.
• Strong computer literacy with advanced knowledge and use of Excel, Word, Outlook, Teams, AutoCAD, and Revit.
• Advanced written & verbal communication skills.
• Advanced knowledge of applicable codes and industry standards and guidelines.
• Experience with critical environments and related building systems.
• Professional Engineer license is a plus

Why Join Precis?

• Be part of a collaborative, innovative team that values your ideas and expertise.
• Shape growth for a respected, specialized engineering and architecture firm.
• Enjoy a flexible, supportive work environment and competitive compensation package.

Equal Opportunity Employer

Precis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics

Avo Photonics is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications.

We seek a diligent, dedicated and meticulous person who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must plan his/her own work schedule, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects.

This role may be suitable for a junior or senior engineer.

Specific:

• Develop high yield, cost efficient, manufacturable processes as appropriate for target production volumes
• Act as end-to-end owner of key equipment such as die bonders, wire bonders, seam sealers, laser welders, etc
• Provide subject matter expertise for process development on equipment you own. Understand tool capability, process viability, and material selection
• Own maintenance, upgrade, and repair of equipment you own. Ensure minimal production downtime through regular preventative maintenance. Understand the function of the tools inside and out, in order to resolve issues as quickly as possible
• Provide data-based evidence that developed processes meet product requirements through design of experiments and statistical process control (within material availability)
• Generate documentation of the process development lifecycle for each project; contribute to business knowledge repositories for fixtures, materials, and process parameters
• Create work instructions and provide training on resultant processes to Product Engineering and Manufacturing personnel
• Guide the design of fixtures required to assemble products
• Recommend and implement new equipment and techniques to improve process capabilities

Requirements:

• B.S. in Physics, Material Science, or relevant Engineering field
• 5 years experience with precision optical alignments or programming automated manufacturing equipment
• 5 years of experience in design of experiments and statistical process control.
• 3 years of manufacturing experience
• Proficiency with software-based logic, such as programming, Matlab, etc.
• Excellent communication skills and willingness to learn

Avo Photonics offers competitive salaries and a comprehensive benefits package.

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Avo Photonics is a dynamic contract engineering services company that designs, develops, and manufactures custom opto-electronic products for a large customer base. Members of our staff can design, prototype, and produce next generation products for a diverse range of markets including environmental, medical, automotive, military, industrial, aerospace, and communications.

We seek a diligent, dedicated and meticulous Payroll Manager who will help to further our success and reputation in the industry through world-class service.

Specifically:

• Oversee and manage payroll operations, ensuring accurate and timely payroll processing and compliance with laws and regulations, and company policies.
• Provide strong leadership and mentorship to the payroll staff, fostering a culture of excellence and continuous improvement.
• Develop, document, and implement policies and procedures for payroll operations.
• Administer and maintain payroll systems, ensure data integrity, and lead implementation of system upgrades and enhancements as required.
• Ensure department procedures and systems maintain confidentiality and protection of payroll information (payrates, personal information, etc.) per company policy and data privacy regulations.
• Collaborate with HR, finance, and other departments to gather and validate payroll information, such as new hires, terminations, promotions, and salary changes.
• Assist with internal & external audits, ensuring adherence to deadlines and compliance with audit requirements.
• Address employee inquiries and concerns related to payroll, providing exceptional customer service and support.
• Stay updated on payroll regulations, tax laws, and industry trends, implementing necessary changes to ensure compliance and best practices.

Requirements:

• Bachelor's degree in accounting, finance, business administration, or related field required.
• Payroll accreditation (Certified Payroll Professional (CPP)) is preferred.
• 5–7+ years of progressive experience processing payroll in a high volume, multi-state/international environment to include at least 2 years of supervisory experience.
• Advanced proficiency in Excel, and payroll systems (Workday preferred).
• In-depth knowledge of payroll tax regulations, wage and hour laws, and compliance requirements.
• Ability to exercise discretion, judgment, and confidentiality.
• Excellent verbal and written communication skills.
• Strong attention to detail, along with excellent organizational skills.
• Excellent customer service skills.

Apply: Avo Photonics offers competitive salaries and a comprehensive benefits package. Apply today!

Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Shifts Available:

• 
  
• 2nd Shift: 2:30pm-11:00pm
  
• 3rd Shift: 10:30pm-7:00am
  

Job Summary:

Join a high‑precision manufacturing team where you’ll operate CNC machines and advanced inspection tools to produce quality components for critical industries.

What You’ll Do

• 
  
• Set up, operate, and troubleshoot CNC machining centers including lathes and/or mills.
  
• Read and interpret blueprints, engineering drawings, and work instructions.
  
• Edit G‑code and assist with CNC programming as needed.
  
• Run production jobs, including complex geometries, while meeting setup/run times.
  
• Perform first‑piece and in‑process inspections using precision measuring tools (QMM, OGP, comparators, etc.).
  
• Machine both thermoplastic and metal materials.
  
• Maintain accurate documentation, shop floor data collection, and setup sheets.
  
• Perform basic machine maintenance and keep a clean, safe workspace.
  
• Support continuous improvement and collaborate in team meetings.
  

What We’re Looking For

• 
  
• High School Diploma/GED or equivalent experience.
  
• 3+ years of CNC machining experience
  
• Strong G‑code knowledge for both mills and lathes.
  
• Ability to independently read blueprints and technical documents.
  
• Experience with inspection tools and machining both plastics and metals.
  
• Ability to operate multiple machines and work with minimal supervision.