Engineering Jobs in Grand Prairie, TX
82 positions found — Page 3
JOB SUMMARY
The position is broadly responsible for the development of electrical and process control systems for equipment used in the Food Processing, Pharmaceutical, Chemical, Water Treatment, Manufacturing and other industries.
Essential Functions
Essential Function
Understanding of customer's specific application and process requirements
Developing instrumentation lists, electrical wiring schematics, Bill of Materials, control panel layout, one line and point-to-point wiring diagrams.
PLC and SCADA programming
Preparing budgetary cost estimates
Supervising fabrication of control systems, performing factory and site checkout
Managing and physically participating in equipment and systems installation and startup
Developing and maintaining project documentation: drawings, Bill of Materials and equipment IOM manuals
Providing post-installation troubleshooting and technical support
Required for All Jobs
• Performs other duties as assigned
• Complies with all policies and standards
QUALIFICATIONS
Education
Education Level Education Details Req/
Pref
Associate's Degree
Bachelor's Degree Mechanical, chemical, or electrical engineering Required
Work Experience
Experience Experience Details Required/
Preferred
1-3 years
4-6 years
7-9 years
10+ years Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, PLC/SCADA programming, technical writing, and communication skills Required
Knowledge, Skills and Abilities
Industrial gases industry experience would be helpful. Good English writing and speaking skills are required.
Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, technical writing, and communication skills
Ability to read, understand and create electrical drawings, block diagrams and P&ID's
Experience in process automation, instrumentation, and PLC/SCADA systems
Comprehensive experience programming Allen-Bradley CompactLogix, ControlLogix, WonderWare and Siemens PLCs and HMI
Working knowledge of motors, blowers, pumps, and compressors
Familiarity with NEC and NFPA standards
Licenses and Certifications
Licenses/Certifications Licenses/Certification Details Time Frame Required/
Preferred
PHYSICAL DEMANDS/WORKING CONDITIONS
Physical Demands Category:
Physical Demands
A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Physical Demand N/A Rarely Occasionally Frequently Constantly Weight
Stationary Position X
Move/Traverse X
Stationary Position/Seated X
Transport/Carrying X
Exerting Force/Pushing X
Exerting Force/Pulling X
Ascend/Descend X
Balancing X
Position Self/Stooping X
Position Self/Kneeling X
Position Self/Crouching X
Position Self/Crawling X
Reaching X
Handling X
Grasping X
Feeling X
Communicate/Talking X
Communicate/Hearing X
Repetitive Motions X
Coordination X
Travel Requirements
Estimated Amount Brief Description
50% Extensive domestic travel will be required
Baer is looking for Quality Engineer for a 6+ month project located in Irving, TX
Title: Quality Engineer
Location: Hybrid – Irving, TX (3 days per week onsite)
Duration: 6 months
Rate: All-Inclusive
Alignment: W2 (C2C Not Permitted)
Overview
We are seeking a Quality Engineer to support a large-scale healthcare platform focused on ERP integrations and platform stability. In this role, you will validate complex data flows, APIs, and event-driven systems that support critical business processes. You will work closely with Engineering and Product teams in an Agile environment to ensure reliable, high-quality platform performance.
Description
- Test ERP integrations, APIs, and complex data flows across systems.
- Design and execute test strategies for platforms integrating with SAP, Workday, Oracle, Infor, or similar ERP systems.
- Build and maintain automated tests using Playwright, Postman/Newman, REST Assured, Cypress, or similar tools.
- Perform API, functional, regression, and performance testing.
- Use SQL to validate data transformations and backend pipelines.
- Test event-driven systems such as Azure Event Hub, Service Bus, or Kafka.
- Create and maintain test plans, cases, and defect documentation.
- Collaborate with Engineering and Product teams in Agile ceremonies and quality planning.
Requirements
- Experience testing ERP-integrated and data-intensive systems.
- Hands-on experience with test automation frameworks and API testing tools.
- Strong SQL skills for backend data validation.
- Experience testing distributed or event-driven architectures.
- Solid understanding of Agile/Scrum methodologies.
- Strong analytical, troubleshooting, and communication skills.
Preferred
- Experience in healthcare or regulated industries.
- Experience improving test automation frameworks or strategies.
- Familiarity with AI-assisted testing or workflow automation tools.
Company Overview:
Baer provides best-in-class engagement experiences for our consultants. Our job requirements are carefully vetted and are typically associated with pivotal programs offering tremendous opportunities to expand your skills leveraging the latest solutions.
Baer is an equal opportunity employer including disability/veteran.
ALL OPEN JOBS
Company Overview:
DataOne Systems is a leading provider of EF&I (Engineering, Furnishing, and Installation) services and high-quality cable manufacturing solutions. We specialize in delivering end-to-end infrastructure solutions that support the telecommunications, data, and power industries. Our commitment to excellence, innovation, and customer satisfaction drives our success, and we're looking for a dynamic Sales Representative to join our team.
Position Overview:
The Sales Representative will be responsible for driving sales and revenue growth by identifying and pursuing new business opportunities, building strong relationships with clients, and promoting our comprehensive range of products and services. This role requires a deep understanding of the telecommunications and cable manufacturing industries, as well as a proven track record in sales.
Key Responsibilities:
- Sales Strategy Development: Develop and execute a strategic sales plan to achieve sales targets and expand our customer base for EF&I services and cable manufacturing solutions.
- Client Relationship Management: Establish and maintain strong relationships with existing clients while identifying and cultivating new business opportunities within the telecommunications, data, and power sectors.
- Product Knowledge: Maintain a thorough understanding of our services and cable manufacturing products, including technical specifications, industry applications, and competitive advantages.
- Proposal Preparation: Prepare and present customized proposals, quotes, and sales presentations to potential clients, addressing their specific needs and requirements.
- Negotiation and Closing: Lead contract negotiations, ensuring favorable terms and conditions for the company while meeting the client's expectations. Successfully close sales deals to meet or exceed sales targets.
- Market Research: Stay updated on industry trends, market conditions, and competitor activities to identify emerging opportunities and threats.
- Collaboration: Work closely with internal teams, including engineering, project management, and production, to ensure successful delivery of projects and customer satisfaction.
- Reporting: Provide regular sales reports, forecasts, and updates via Salesforce to VP of Sales and senior leadership team.
Qualifications:
- Experience: Minimum of 5 years of sales experience in EF&I services, telecommunications, cable manufacturing, or related industries.
- Education: Bachelor’s degree in Business, Engineering, Telecommunications, or a related field is preferred.
- Skills:
- Strong understanding of EF&I services and cable manufacturing processes.
- Proven ability to develop and maintain long-term client relationships.
- Excellent negotiation, communication, and presentation skills.
- Ability to work independently and as part of a team in a fast-paced, dynamic environment.
- Proficiency in CRM software and Microsoft Office Suite.
- Travel: Willingness to travel as needed to meet with clients and attend industry events.
Who we are:
GDA Contractors is a specialty construction firm providing waterproofing, caulking, and moisture protection and restoration services to general contractors and building owners. With a highly trained, service, and safety-conscious staff, our objective is to perform our contracted work in a manner that far exceeds our customer’s expectations. We are confident that our future success is determined by our performance today.
The Opportunity:
As Restoration Estimator/Project Manager, you will work closely with senior management to ensure that company goals and missions are met.
What we offer:
- Corporate Culture is based on integrity, respect accountability and excellence
- A competitive base salary, bonus compensation reflecting performance and a truck allowance
- Medical, Dental, Vision, Life Insurance
- 401K Program with up to 3% company match
- Training with numerous learning and development opportunities to managerial positions
Sales and Estimating:
- Responsible for following the Bid Schedule
- Follow bidding and selling practices established by the company.
- Set-up and Start-up phase of each project.
- Maintain Bidding Activity of a minimum of 3 jobs per week.
- Close contracts on projects bid
Project Management:
- Approve all vendor invoices of purchases for jobs under contract.
- Coordinate customer relations and requests.
- Personally coordinate any technically difficult installations.
- Complete Job Set-up and Start-up functions on jobs sold
- Manage and oversee contract administration from negotiation
What you need to succeed:
- Must have a minimum of a Bachelor’s Degree in Construction Management/Engineering or a related field
- Construction management or related industry experience required
- Construction estimating/bidding experience preferred
As a committed equal opportunity employer who strictly maintains a drug-free workplace, the company conducts pre-employment criminal, drug, and social security screening. Must be legally authorized to work in the United States
Job Title: Electrical Engineer
Location: Irving TX 75038
Duration: 12 months
The Electrical Engineering provides support to new and existing products, processes, prototypes, fixtures, and tools.
Applies engineering and scientific principles to the evaluation and solution of technical problems with some guidance from technical lead or manager. Supports continuous quality improvement and may serve as technical lead for individual projects (component/subassembly).
This position is to specifically support the on-market instrument, Alinity s.
We will be looking for this engineer to support board updates due to obsolescence and supply chain issues, along with subassembly updates. I will need someone who can do spec comparisons for the typical electrical engineering components of resistors, capacitors, diodes, etc.
Education min. / Experience min.:
Bachelors in electrical engineering is the minimum education requirement.
For experience, 5 years would be the goal for experience, but 3 years minimum.
Top 5 skills/requirements:
Education min. / Experience min.
Bachelors in electrical engineering is education minimum.
For experience, I would say 5 years would be the goal for experience, but 3 minimum.
Work Location: 1915 Hurd Drive, Irving, TX, USA, 75038
Assignment Duration: 12 months
Work Schedule: Monday-Friday, 6:00 AM - 2:30 PM (Training Schedule: 8:45 to 3:30 Monday 7:00 to 3:30 Tuesday; 6:00am to 2:30 next 8 days)
Work Arrangement: Onsite
Job Summary:
Working under general supervision, this position is responsible for the production of high-quality medical device instruments. This position includes detailed assembly and testing of various electronic components and finished devices in a controlled manufacturing environment.
Job Responsibilities:
* Performs testing of electronic components and assemblies using automated test equipment
* May perform mechanical assembly of electromechanical subassemblies and devices
* Ability to read, comprehend and follow written procedures; understand and follow verbal instructions. May instruct others in the use of all manuals, test procedures and documentation associated with specialized equipment.
* Reads and interprets engineering drawings, schematics and complex test procedures.
* Participates in continuous improvement/quality initiatives in order to enhance production processes to achieve quality and profitability metrics.
* Maintains accurate records to ensure Device History Records and quality documents are accurate, all parts are traceable and quality issues can be addressed to assure the quality of all products.
* Prioritizes work by determining the sequencing and timing of different jobs based on precedence and importance.
* Positively represents the company during tours by demonstrating techniques and sharing appropriate information.
* Supports all Company initiatives as identified by management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements.
* Complies with U.S. Food and Drug Administration (FDA) regulations, ISO or other regulatory requirements, Company policies, operating procedures, processes, and task assignments.
* Adheres to all environmental, health and safety SOP's, equipment, policies and procedures, including any department specific requirements.
* Maintains positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors.
Minimum Qualifications:
* Experience with electronic assembly and test in a medical device industry preferred.
* High School Diploma or equivalency is required, preferred AAS
* 2 or more years experience with electromechanical assemblies/electronic manufacturing, technical certifications, etc. preferred
Preferred Qualifications:
* Experience in troubleshooting equipment, building and or testing of electronic assemblies
* Working knowledge of IPC standards and use of complex tools and equipment specific to functional areas
* Experience in GMP, ISO, and FDA controlled environments preferred
* Ability to work within a team and as an individual contributor in a fast-paced, changing environment.
* Strong verbal and written communications with ability to effectively communicate at multiple levels in the organization.
* Multitasks, prioritizes and meets deadlines in timely manner.
* Strong organizational and follow-up skills, as well as attention to detail.
* Ability to maintain regular and predictable attendance.
* Ability to work scheduled overtime as required is preferred.
* Ability to hand and lift up to 25 lbs. as needed for specific job functions
* Must be able to sit and/or stand for long periods of time.
* Ability to frequently sit, stand, walk, reach within hands and arm's length, stoop, kneel and crouch.
The Manager - Data Science and Analytics plays a critical role in revenue and margin management for the Merchandising organization by performing various pricing analyses to exceed the financial targets. This highly visible individual will manage the daily and weekly promotions for print and digital marketing vehicles, so to be successful, strong analytical skills and business savviness is vital. This Team Member will develop and use analytics tools to draw insights and provides actionable recommendations while exhibiting higher-order critical thinking under ambiguous situations.
Major Activities
- Machine Learning Forecasting: Maintain, regularly run, and potentially adjust time-series forecasting pipelines with backtesting, accuracy diagnostics, drift detection, and ongoing monitoring.
- Pricing optimization: Maintain, regularly run and potentially adjust pricing/markdown optimization engines (e.g., Gurobi, CP-SAT), including feasibility checks, constraint adjustments, relaxations, and scenario analysis.
- Mathematical modeling: Translate new business rules (e.g., new constraints for pricing) into robust mathematical formulations.
- Production engineering: Maintain a modular codebase across forecasting, optimization, and data workflows; keep ensure code quality, test coverage, and documentation. Maintain overrides to handle data quality issues.
- Reporting & impact measurement: Own reporting for the pricing engine, turn recommendations into stakeholder-ready insights and quantify business impact.
- Cross-functional collaboration: Partner with Merchants and Pricing Advisory to translate business needs into features for retail pricing algorithm
- Develop and implement user-friendly analytics dashboards and tools that perform complex analysis manipulating large data sets to identify actionable business insights
- Initiate, partner with internal teams on process improvement initiatives
- Ad-hoc projects as identified by the supervisor
Other duties as assigned
Preferred Education/Experience
- Bachelor’s Degree or equivalent experience required.
- Advanced MS Excel required.
- Proficiency in forecasting and machine learning: Ability to build and deploy time-series forecasting models including feature engineering and robust backtesting & monitoring.
- Data manipulation and analysis: Strong ability to work with large datasets using Python (pandas/NumPy) and SQL, performing clean feature creation and diagnostic analysis.
- Data Engineering: Previous experience building DBT ETLs on cloud-based warehouses like BigQuery and working in Vertex AI.
- Problem-solving ability: Strong analytical skills to decompose complex business problems, balance solution quality vs runtime, and implement pragmatic fallbacks.
- Master’s degree in economics, data analytics, or math related field preferred
Minimum Type of Experience Required
- 7+ years of relevant work experience
Other
- SQL and Python required, Tableau or Power BI is preferred
Applicants in the U.S. must satisfy federal, state, and local legal requirements of the job.
Responsibilities:
- 40% Strategy & Planning
- Looks across product teams and feature sets with a focus on alignment and dependencies
- Sets the overall product vision and strategies for the enterprise product by gaining a thorough understanding of customer and associate needs, both existing and potential, and using that knowledge to provide our cleint
- customers and associates with an unparalleled shopping experience
- Drives growth for the business by applying domain expertise to provide thought leadership and translate vision into action
- Collaborates across the enterprise to create alignment between products in order to provide a seamless user experience
- Understands financial and business impact of proposed product updates and activities within portfolio, prioritizes updates to support the enterprise roadmap, and based on prioritization allocates funding across the products
- Identifies goals, metrics and appropriate analytics to measure the performance of the product and its individual features, and continually makes recommendations and refinements to the product based on learnings
- Contributes to and makes recommendations for strategic plans in support of key objectives in a timely and fiscally responsible manner
- Participates in and influences development of technology roadmaps across the enterprise
- Supports and nurtures strategic vendor relationships; recommends ways to influence vendors that align to domain, portfolio, and enterprise strategic objectives
- 30% Delivery & Execution
- Drives product development by reviewing performance and directing work efforts of product teams to ensure products are aligned with company, stakeholder and end user priorities
- Understands enterprise goals and KPIs to ensure value is delivered against them
- Resolves issues within or across product teams that may impair teams from delivery of a quality product in order to meet strategic, financial and technical goals
- Receives and prioritizes incoming requests from business partners and stakeholders while keeping in mind the business strategy, product vision and user needs
- Provides guidance on design of products while keeping in mind dependencies and integration with other products across the enterprise
- Reviews and analyzes product metrics to inform strategic and tactical product decisions
- Makes suggestions that help drive operational excellence to create internal customer satisfaction and meet operational metrics
- 30% Team and Stakeholder
- Provides leadership, mentoring and coaching to Product Managers
- Attracts, retains and develops top talent to build a world class Product Management Team
- Conducts annual and mid-year reviews, reviewing individual development plans and providing performance feedback
- Fosters collaboration with team members (Engineering, UX, etc.) to drive value and identify and resolve impediments
- Acts as a proponent of modern software development practices
- Advocates for the end user and stakeholder by becoming associated with the product, empathizing with and understanding user need
- Works with the product team to continuously assess progress, disseminate lessons learned, and understand next steps
- Manages cross functional team and stakeholder expectations to execute on product strategy and provides education to requestors to determine prioritization based on tangible benefits and/or user experience
- Guides more junior team members in strategy, alignment, analysis and execution tasks
- Participates in and contributes to learning activities around modern software design and development core practices (communities of practice)
Basic Qualifications:
- Bachelors Degree
- Minimum 6 years of experience in digital product management
Preferred Qualifications:
- Bachelors Degree in Computer Science or Engineering
- MBA or Masters degree
- 5+ years of experience translating business strategy and analysis into consumer facing digital products
- 5+ years of experience in Retail, Delivery, and Technical Rules Engines
Now Hiring: Senior Splunk Engineer
Location: Irving, TX (75063)
Duration: 12 Months (Potential Extension)
Role: Contract
About the Role
We’re looking for an experienced Senior Splunk Engineer to lead the administration and optimization of Splunk Enterprise Security in a cloud-hosted environment. If you’re passionate about SIEM operations, security monitoring, and building scalable Splunk architectures, this opportunity is for you!
Required Skills & Experience
5+ years of hands-on Splunk platform administration
Active Splunk Enterprise Certified Admin and/or Splunk ES Certified Admin certification
Experience managing Splunk in AWS / Azure / GCP environments
Strong knowledge of SIEM operations, log management, and event correlation
Advanced SPL (Search Processing Language) skills
Experience with Splunk components:
• Indexers
• Search Heads
• Heavy/Universal Forwarders
• Deployment Servers
• Cluster Management
Familiarity with compliance frameworks: PCI DSS, SOX, NIST CSF
Strong communication skills for collaborating with technical & non-technical stakeholders
Nice to Have
Experience in large-scale retail or high-transaction environments
Knowledge of Splunk SOAR (Phantom) and security automation workflows
Background in Threat Hunting, SOC Operations, or Detection Engineering
Certifications such as CISSP, GIAC (GCIA/GCIH), AWS Security Specialty, AZ-500
Experience with Infrastructure as Code (Terraform, Ansible)
Scripting skills in Python, Bash, or PowerShell
Key Responsibilities
Lead end-to-end administration of Splunk Enterprise Security
Design & manage notable events, risk-based alerting, and threat intelligence integrations
Build and optimize correlation searches, dashboards, and investigations
Onboard enterprise log sources and ensure CIM compliance
Support PCI DSS, SOX, and NIST CSF audit and reporting requirements
Monitor environment health: indexing, search performance, forwarders, licensing
Maintain documentation, runbooks, and troubleshooting guides
Serve as the escalation point for complex Splunk issues
Collaborate with security architecture teams to enhance the overall security ecosystem
Position Summary
The Maintenance Technician II is responsible for inspecting, troubleshooting, repairing, and maintaining manufacturing equipment and systems used in production operations. This role requires strong mechanical skills and the ability to work independently while supporting equipment reliability on the manufacturing line.
Requirements
- Must provide basic personal tools
- Ability to work independently and manage assigned tasks
- Strong mechanical aptitude
- Electrical troubleshooting experience is a plus
- High school diploma or equivalent
- Minimum 3 years of maintenance experience in manufacturing or a related field
Key Responsibilities
- Maintain and repair manufacturing line equipment, including molding equipment, conveyor systems, and other production machinery.
- Diagnose equipment problems using work orders, technical documentation, and discussions with operators.
- Perform preventive maintenance tasks such as inspecting, cleaning, testing, and repairing equipment.
- Inspect industrial equipment for proper installation, assembly, and potential defects.
- Troubleshoot mechanical and electrical systems using testing equipment and diagnostic tools.
- Repair or replace defective components including seals, gaskets, and other mechanical parts.
- Calibrate testing instruments and equipment to ensure proper performance.
- Maintain accurate maintenance logs, repair records, and calibration documentation.
- Maintain inventory of spare parts and coordinate repair or replacement as needed.
- Study blueprints, schematics, and service manuals to determine installation and repair procedures.
- Collaborate with engineering, production, and technical teams to resolve equipment issues.
- Conduct safety inspections in manufacturing and maintenance environments.
- Assist with equipment setup, testing, and troubleshooting to ensure proper functionality.
