Engineering Jobs in Glencoe Illinois Remote
328 positions found — Page 13
In addition to capital projects management, focus will be safety, quality and production improvements thru lean initiatives.
Supervise the engineering team at each location to maintain all equipment and all related equipment and devices at or above required capacity and efficiency.
Coordinate implementation of product and facilities changes and the costing and purchasing of associated materials and equipment.
Investigate current practices and scope.
Develop and implement changes that will improve operational productivity.
Job Description Responsibilities: Responsible for developing and implementation of lean initiatives in facilities.
Determine engineering feasibility, cost effectiveness and customer demand for new and existing products.
Identify ways to increase operational productivity thru Lean Manufacturing initiatives and through cost-saving projects for the plants and operations.
Lead engineering studies, forecast operating costs of department, develop products costs and prepare capital budget requests.
Analyze costs related to capital expenditures to determine break even points, payback and associated hard and soft savings Assess processes and environmental conditions to ensure compliance with state and federal regulatory agencies and organization safety standards.
Develop new and/or enhance existing procedures, statistical analysis, inspections, and validation activities.
Contribute to the organization's process improvement activities.
Conduct training, when appropriate, on engineering concepts and tools, including but not limited to inspection, measurement and test methods.
Develop and mentor staff through on-boarding, open communication, training and development opportunities and performance management processes; build and maintain employee morale and motivation; ensure the team is appropriately staffed with required competencies.
Required Experience: Education Bachelor’s degree in an Engineering discipline (Industrial Engineering/Mechanical Engineering/Electrical Engineering).
Work Experience At least 10 years of engineering experience in a distribution or warehousing environment.
Experience implementing or managing significant automation -- inclusive, but not limited to the following: goods-to-person, automated guided vehicles, conveyor sortation, print/apply systems, check-weight systems, etc At least 6 years of experience managing people, including hiring, developing, motivating and directing people as they work Advanced skill levels in technical writing, research paper writing and/or experimental design.
Basic AS400 or ERP systems knowledge.
Preferred Qualifications: Master’s Degree in an Engineering discipline (Industrial Engineering/Mechanical Engineering/Electrical Engineering).
CAD experience.
Automation expertise.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $177,000.00
- $266,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Work with and train sales forces to be able to confidently sell product to customers.
May have one or more Manager level direct reports.
Job Description Responsibilities: Negotiate pricing with vendors for raw materials and finished goods.
Visit vendors to develop products and train personnel in all aspects of each product and usages.
Coordinate materials with vendors and develop finished custom items.
Provide coaching and training to product management team.
Service as a resource and provide project oversight.
Develop and implement comprehensive marketing plans and promotional programs for existing products to include product strategy development, pricing strategy, collateral creation and brand management Review monthly financial performance and determine contributing factors.
Offer solutions for detrimental sales or cost trends.
Prepare product forecasts to include revenue and expense expectations.
Analyze sales trends over time and impact of competitive strategies.
Support forecasts and budgets with appropriately detailed marketing plans.
Work with Manufacturing, Purchasing, and Engineering to reduce Cost of Goods by assessing packaging, alternate materials, new sources of material, stocking, make to order, direct to customer shipments, etc.
Manage inventory by focusing on eliminating surplus and optimizing SKU count.
Develop and deliver training materials for internal stakeholders, sales forces and customers.
Create sales tools.
Conduct effective market research and translate that research into new products, product improvements, or line extensions by providing leadership to a multi-functional team.
Travel with sales force to support efforts to convert customers to purchase Medline products.
Provide timely follow up to sales forces by answering product questions via e-mail and phone.
Develop and mentor staff through on-boarding, open communication, training and development opportunities and performance management processes; build and maintain employee morale and motivation; ensure the team is appropriately staffed with required competencies.
Required Experience: Education Bachelor’s degree.
MINIMUM JOB REQUIREMENTS: At least 4 years experience in marketing, sales, product management or clinical practice in the healthcare industry.
Experience negotiating with outside vendors and internal resources.
Experience collecting and analyzing financial data.
Knowledge / Skills / Abilities Willing to travel up to 50% of the time for business purposes (within state and out of state).
Intermediate level skill in Microsoft Word (for example: inserting headers, page breaks, page numbers and tables and/or adjusting table columns).
Intermediate level skill in Microsoft PowerPoint (for example: applying a theme, formatting character spacing, inserting a picture, changing slide layout and theme colors, adding transitions, customizing slide numbers, changing chart style and/or formatting font).
Intermediate level skill in Microsoft Excel (for example: using SUM function, setting borders, setting column width, inserting charts, using text wrap, sorting, setting headers and footers and/or print scaling).
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $92,000.00
- $138,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Adapt departmental plans and priorities to address resource and operational challenges.
Job Description Responsibilities: Ensure quality and regulatory compliance with applicable regulations (ex.
QSR, GMP,ISO) pertaining to the applicable life cycle and regions of distribution for the product.
Acts as a liaison with the Divisions, Suppliers, Manufacturing, and/or Operations to ensure quality products and customer satisfaction.
Manage complaints and develop new approaches to solve problems identified during the investigation process.
Identify and manage the execution of continuous improvement projects.
Assist the division in product evaluation from a quality assurance and regulatory compliance standpoint.
Assist in the planning of the design, testing, inspection, and process validations to assure quality products or components.
Ensure all quality issues are resolved to customer satisfaction, in a timely manner.
Resolve issues relating to product or production quality by interfacing with internal and external customers.
Management responsibilities include: Typically oversees professional employees/teams OR typically manages non-professional employees through Supervisors in manufacturing, distribution or office environments Day-to-day operations of a group of employees; May have limited budgetary responsibility and usually contributes to budgetary impact; Interpret and execute policies for departments/projects and develops.
Recommend and implement new policies or modifications to existing policies.
Provide general guidelines and parameters for staff functioning.
Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.
Requirements: Education Bachelor’s degree in Engineering, Science, or Technical Field.
Work Experience At least 4 years of experience related to the design/operation of medical device or drug combination product platforms, design controls, risk management, including working in compliance with QSR/GMP/ISO requirements or other regulated industries (21CFR 820, ISO 13485, ISO 14971, MDSAP, and MDR).
Knowledge / Skills / Abilities Broad technical knowledge of relevant standards and regulations (21CFR 820, ISO 13485, ISO 14971, MDSAP, and MDR etc.) Proficiency in analyzing and reporting data in order to identify issues, trends, or exceptions to drive improvement of results and find solutions.
Demonstrated ability to control and coordinate concurrent projects, competing priorities and critical deadlines.
Advanced level skill in Microsoft Excel (for example: using AVERAGE function, merging and centering cells, printing centered page and/or creating apivot table).
Position requires travel up to 25% of the time for business purposes (within state, out of state and/or internationally).
Preferred Requirements: Work Experience At least 2 years of supervisory/managerial experience.
Experience in Medical Device, Pharmaceutical, Food, Cosmetic, or Personal Products Industries.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $116,000.00
- $174,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Work with and train sales forces to be able to confidently sell product to customers.
May have one or more Manager level direct reports.
Job Description Responsibilities: Negotiate pricing with vendors for raw materials and finished goods.
Visit vendors to develop products and train personnel in all aspects of each product and usages.
Coordinate materials with vendors and develop finished custom items.
Provide coaching and training to product management team.
Service as a resource and provide project oversight.
Develop and implement comprehensive marketing plans and promotional programs for existing products to include product strategy development, pricing strategy, collateral creation and brand management Review monthly financial performance and determine contributing factors.
Offer solutions for detrimental sales or cost trends.
Prepare product forecasts to include revenue and expense expectations.
Analyze sales trends over time and impact of competitive strategies.
Support forecasts and budgets with appropriately detailed marketing plans.
Work with Manufacturing, Purchasing, and Engineering to reduce Cost of Goods by assessing packaging, alternate materials, new sources of material, stocking, make to order, direct to customer shipments, etc.
Manage inventory by focusing on eliminating surplus and optimizing SKU count.
Develop and deliver training materials for internal stakeholders, sales forces and customers.
Create sales tools.
Conduct effective market research and translate that research into new products, product improvements, or line extensions by providing leadership to a multi-functional team.
Travel with sales force to support efforts to convert customers to purchase Medline products.
Provide timely follow up to sales forces by answering product questions via e-mail and phone.
Develop and mentor staff through on-boarding, open communication, training and development opportunities and performance management processes; build and maintain employee morale and motivation; ensure the team is appropriately staffed with required competencies.
Required Experience: Education Bachelor’s degree.
Pursing an MBA degree to be completed by June 2026.
MINIMUM JOB REQUIREMENTS: At least 4 years experience in marketing, sales, product management or clinical practice in the healthcare industry.
Experience negotiating with outside vendors and internal resources.
Experience collecting and analyzing financial data.
Knowledge / Skills / Abilities Willing to travel up to 50% of the time for business purposes (within state and out of state).
Intermediate level skill in Microsoft Word (for example: inserting headers, page breaks, page numbers and tables and/or adjusting table columns).
Intermediate level skill in Microsoft PowerPoint (for example: applying a theme, formatting character spacing, inserting a picture, changing slide layout and theme colors, adding transitions, customizing slide numbers, changing chart style and/or formatting font).
Intermediate level skill in Microsoft Excel (for example: using SUM function, setting borders, setting column width, inserting charts, using text wrap, sorting, setting headers and footers and/or print scaling).
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $96,200.00
- $144,560.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
As a Senior Platform Engineer, you will lead the design, development, and maintenance of internal platforms and technical solutions that empower software development and operations teams to deliver applications and infrastructure efficiently and reliably.
You’ll apply DevOps principles to accelerate software delivery, foster cross-functional collaboration, and drive quality through automation and continuous improvement.
In this senior-level role, you’ll take ownership of strategic initiatives, mentor junior engineers, and manage complex projects from planning through execution.
You’ll work closely with developers, architects, and operations teams to ensure platforms are scalable, secure, and optimized for performance—while continuously driving innovation and automation across the organization.
MAJOR RESPONSIBILITIES
- Architect, design, and implement cloud-native platform solutions using modern infrastructure-as-code and automation platforms
- Build and maintain CI/CD pipelines and developer self-service platforms.
- Develop abstraction layers and APIs to simplify platform complexity for development teams.
- Implement and manage container orchestration systems (e.g., Kubernetes, Docker).
- Ensure platform security, compliance, and data protection through automated controls and monitoring.
- Collaborate with development teams to understand workflow requirements and deliver tailored platform capabilities.
- Develop and maintain comprehensive monitoring, logging, and observability solutions.
- Document platform architectures, processes, and best practices for internal use.
- Evaluate and integrate new technologies to enhance platform capabilities and developer experience.
- Provide technical support and guidance to Platform Operations and stakeholders
- Participate in incident response, troubleshooting, and root cause analysis for platform-related issues.
- Contribute to platform strategy and roadmap, aligning with organizational goals.
- Mentor and coach junior engineers, providing technical guidance and support for professional development.
- Track team goals, key projects, and deliverables, ensuring alignment with organizational objectives.
- Assist with project management and coordination of key initiatives.
MINIMUM JOB REQUIREMENTS Education Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field.
Certification / Licensure
- Relevant certifications (e.g., AWS/Azure/GCP Professional, CKA, Terraform Associate) preferred but not required.
Work Experience
- Minimum of 7 years of experience in Platform Engineering, DevOps, or Software Engineering or related fields.
- Experience designing and managing large-scale, enterprise-grade platforms.
Knowledge / Skills / Abilities
- Strong expertise in cloud platforms (AWS, Azure, GCP).
- Proficiency in infrastructure-as-code and configuration management tools.
- Advanced scripting skills (Python, Go, Bash).
- Experience with containerization and orchestration (Kubernetes, Docker).
- Deep understanding of CI/CD pipelines and developer platform concepts.
- Knowledge of security best practices and compliance frameworks.
- Experience with monitoring, logging, and observability tools.
- Ability to design scalable, reliable, and secure platform architectures.
- Excellent troubleshooting and problem-solving skills.
- Strong communication and documentation skills.
- Ability to work independently and collaboratively in a fast-paced environment.
- Experience mentoring and coaching junior engineers.
- Experience tracking team goals, projects, and supporting project management.
PREFERRED JOB REQUIREMENTS Education Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field Certification / Licensure
- Advanced certifications in cloud, DevOps, or platform engineering (e.g., AWS/Azure/GCP Professional, CKA, CKAD).
Work Experience
- 10+ years of experience in Platform Engineering, DevOps, Software Engineering or related fields.
- Experience designing and managing large-scale, enterprise-grade platforms.
Knowledge / Skills / Abilities
- Experience with AI/ML operations and MLOps platforms.
- Knowledge of service mesh technologies (Istio, Linkerd).
- Expertise in cloud-native security tools and practices.
- Experience with platform engineering frameworks (e.g., Backstage).
- Experience with chaos engineering and resilience testing.
- Proven ability to drive platform innovation and adoption across teams.
- Experience mentoring junior engineers and leading technical initiatives.
- Demonstrated project management and leadership skills.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $132,600.00
- $199,160.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Corporate Environmental Manager
Work From Home (Remote) US
R26_0335
Full time
Who We Are
Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.
A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.
Pay Range
$128,600.00-$176,800.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.
The Corporate Environmental Manager will be responsible for ensuring JM manufacturing facilities are in compliance with applicable regulations, identifying and implementing programs that improve factory environmental performance, communicating environmental issues and progress at all levels in the company, and mentoring and developing factory environmental staff. This position is accountable, along with plant managers, for eliminating or reducing factory environmental violations, tracking factory performance metrics, renewing and amending environmental operating permits, leading the development of air pollution construction permits and implementing new programs to address emerging regulations.
Your Day to Day:
- Develop and implement environmental compliance systems and programs for JM's factory operations and employees
- Represent the company with state and federal agencies for air permitting and other issues as required
- Provide regulatory guidance for all environmental media to manufacturing facilities and ensure that compliance systems are adequate to track and document compliance status
- Review all major capital projects and provide environmental impact assessments
- Actively audit factory environmental performance for JM locations and ensure that audit findings are addressed and corrected where appropriate
- Provide regulatory guidance for all environmental media to manufacturing facilities and ensure that compliance systems are adequate to track and document compliance status
- Represent the company with state and federal agencies for air permitting and other issues as required
- Effectively communicate the environmental goals, objectives, performance expectations, and metrics throughout the organization
- Mentor, train, and develop JM factory environmental employees
- Develop and implement management systems to ensure seamless leadership for JM's business environmental activities
- May be required to perform other related duties as assigned
What You Bring to the Team:
- Bachelor's degree in environmental management, engineering or a related field or equivalent experience with a minimum of 8 years in implementing and managing environmental programs and initiatives
- Master's degree with a minimum of 6 years of experience preferred
- Significant knowledge of federal, state and local environmental laws and regulations relating to air, water, solid waste and hazardous waste management
- The ability to develop and implement environmental compliance systems and programs for JM's factory operations and employees
- Solid ability to develop, implement and lead group environmental management programs for the JM's businesses to ensure full compliance with regulations and company requirements
- Demonstrated ability to mentor, train, and develop JM factory environmental employees
- Develop and implement management systems to ensure seamless leadership for JM's business environmental activities
- Solid knowledge of emission inventory development
- Solid leadership skills
- Excellent interpersonal, verbal and written communication skills
- Ability to work both independently and in a diverse team environment
- Heavy travel required (Minimum 30%)
- May be required to lift, carry, push or pull up to and including 25 pounds
- Work environment is typical of an office setting
#LI-KL1 #LI-ONSITE #P #D
Please Keep in Mind
If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.
Benefits
Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.
Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.
Johns Manville supports employee growth with vast educational opportunities and a company-wide mentoring program. This program pairs employees and leaders to grow skills, build stronger internal networks and strengthen the company’s succession planning process. Johns Manville also offers soft and hard skills training facilitated by internal and external presenters. Our talent management team prioritizes the holistic growth of our workforce.
Diversity & Inclusion
Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities.
Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.
We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.
About Us
Johns Manville is a proud member of the Berkshire Hathaway family of companies, serving customers in more than 80 countries, supplying innovative products to the construction, aerospace, automotive, filtration and energy industries. With a more than 160-year legacy, we understand that our story continues to grow only with the right people saying, thinking and doing the right things. Make your story our story.
Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities.
PIae633f215d0e-37344-39995487
Remote working/work at home options are available for this role.
RESPONSIBILITIES:
- Architect, design, and maintain scalable CI/CD pipelines using Azure/AWS DevSecOps.
- Build and optimize Docker-based microservices, images, and deployment pipelines.
- Lead deployments across Docker Swarm, Kubernetes/EKS, and multi-location environments.
- Develop infrastructure automation using Ansible, bash scripting, Terraform and Git-based workflow.
- Manage release pipelines using container registries, artifact feeds, template pipelines, and multi-stage workflows.
- Design multi-environment strategies for dev, QA, staging, and production deployment.
- Implement cloud-native services with AWS & Azure cloud platforms.
- Implement basic security practices, including IAM roles, secrets management, and access controls.
- Develop secure, modular, reusable build and release systems.
- Work closely with full-stack engineering teams (Angular, Java, Python , backend APIs, database engineers).
- Mentor junior DevOps engineers and lead DevOps roadmap decisions.
KNOWLEDGE REQUIREMENTS:
DevOps Expertise:
Azure DevOps pipelines, YAML templating, CI/CD strategy, Git branching models.
Containerization & Orchestration:
Docker images, Docker Compose, Docker Swarm, multi-node/multi-location deployments.
Cloud Technologies:
Azure deployments & infrastructure, AWS (IAM, Lambda, S3, CloudWatch).
Programming / Scripting Languages:
Python, Bash, Linux/Unix administration, awk, shell automation, groovy.
Infrastructure Automation:
Ansible playbooks, tasks/roles, inventory design, configuration management.
Distributed Deployment Architecture:
Multi-site replication, node selection by IP, dynamic service routing.
Database Stack Experience:
PostgreSQL, MySQL, MariaDB operations & migrations.
Observability & Logging:
CloudWatch monitoring, log collection, Prometheus, Grafana, reporting & metrics.
Version Control & Build Systems:
Azure Devops, Git, Git submodules, artifact storage, registry solutions, Secrets Management.
Nice to have AI knowledge/experience and willingness to learn.
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science or related field. MS preferred.
- 7+ years experience in a software devops/development/test capacity with enterprise server, storage or networking products.
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Knoxville, TN (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PIc6dba56b523
Remote working/work at home options are available for this role.
Sr. Data Engineer (Hybrid)
Chicago, IL
The American Medical Association (AMA) is the nation's largest professional Association of physicians and a non-profit organization. We are a unifying voice and powerful ally for America's physicians, the patients they care for, and the promise of a healthier nation. To be part of the AMA is to be part of our Mission to promote the art and science of medicine and the betterment of public health.
At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.
We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.
We have an opportunity at our corporate offices in Chicago for a Sr. Data Engineer (Hybrid) on our Information Technology team. This is a hybrid position reporting into our Chicago, IL office, requiring 3 days a week in the office.
As a Sr. Data Engineer, you will play a key role in implementing
and maintaining AMA's enterprise data platform to support analytics,
interoperability, and responsible AI adoption. This role partners closely with
platform engineering, data governance, data science, IT security, and business
stakeholders to deliver highquality, reliable, and secure data products. This
role contributes to AMA's modern lakehouse architecture, optimizing data
operations, and embedding governance and quality standards into engineering
workflows. This role serves as a
senior technical contributor within the team-providing mentorship to junior
engineers and implementing engineering best practices within the data platform function,
in alignment with architectural direction set by leadership.
RESPONSIBILITIES:
Data Engineering & AI Enablement
- Build and maintain scalable data pipelines and
ETL/ELT workflows supporting analytics, operational reporting, and AI/ML use
cases. - Implement best practice patterns for ingestion,
transformation, modeling, and orchestration within a modern lakehouse
environment (e.g., Databricks, Delta Lake, Azure Data Lake). - Develop highperformance
data models and curated datasets with strong attention to quality, usability,
and interoperability; create reusable engineering components and automation. - Collaborate with the Architecture Team, the Data
Platform Lead, and federated IT teams to optimize storage, compute, and
architectural patterns for performance and costefficiency. - Build model-ready data sets and feature
pipelines to support AI/ ML use cases; serve as a technical coordination point
supporting business units' AI-related infrastructure needs. - Collaborate with data scientists and AI Working
Group to operationalize models responsibly and maintain ongoing monitoring
signals.
Governance, Quality & Compliance
- Embed data governance, metadata standards,
lineage tracking, and quality controls directly into engineering workflows;
ensure technical implementation and alignment within engineering workflows. - Work with the Data Governance Lead and business
stakeholders to operationalize stewardship, classification, validation,
retention, and access standards. - Implement privacybydesign and securitybydesign
principles, ensuring compliance with internal policies and regulatory
obligations. - Maintain documentation for pipelines, datasets,
and transformations to support transparency and audit requirements.
Platform Reliability, Observability & Optimization
- Monitor and troubleshoot pipeline failures,
performance bottlenecks, data anomalies, and platformlevel issues. - Implement observability tooling, alerts,
logging, and dashboards to ensure endtoend reliability. - Support cost governance by optimizing compute
resources, refining job schedules, and advising on efficient architecture. - Collaborate with the Data Platform Lead on
scaling, configuration management, CI/CD pipelines, and environment management. - Collaborate with business units to understand
data needs, translate them into engineering requirements, and deliver
fit-for-purpose data solutions; share and apply best practices and emerging
technologies within assigned initiatives. - Work with IT Security and Legal/ Compliance to
ensure platform and datasets meet risk and regulatory standards.
Staff Management
- Lead, mentor, and provide management oversight
for staff. - Responsible for setting objectives, evaluating
employee performance, and fostering a collaborative team environment. - Responsible for developing staff knowledge and
skills to support career development.
May include other responsibilities as assigned
REQUIREMENTS:
- Bachelor's degree in Computer Science, Engineering, Information Systems, or related field preferred or equivalent work experience and HS diploma/equivalent education required.
- 5+ years of experience in data engineering within cloud environments
- Experience in people management preferred.
- Demonstrated hands-on experience with modern data platforms (Databricks preferred).
- Proficiency in Python, SQL, and data
transformation frameworks. - Experience designing and operationalizing
ETL/ELT pipelines, orchestration workflows (Airflow, Databricks Workflows), and
CI/CD processes. - Solid understanding of data modeling,
structured/unstructured data patterns, and schema design. - Experience implementing governance and quality
controls: metadata, lineage, validation, stewardship workflows. - Working knowledge of cloud architecture, IAM,
networking, and security best practices. - Demonstrated ability to collaborate across
technical and business teams. - Exposure to AI/ML engineering concepts, feature
stores, model monitoring, or MLOps patterns. - Experience with infrastructureascode
(Terraform, CloudFormation) or DevOps tooling.
The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.
This role is an exempt position, and the salary range for this position is $115,523.42-$150,972.44. This is the lowest to highest salary we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration and geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.
We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.
THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION
Apply NowShare Save JobRemote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Kalamazoo, MI / Remote (U.S.)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
#Remote
PI7087748e2d7e-3631
Remote working/work at home options are available for this role.
