Engineering Jobs in Gladstone New Jersey

Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. 

Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
• Performs repairs and assigned preventative maintenance services.
• Estimates time and material cost on vehicle repairs and requisition of new parts.
• Conduct safety checks on vehicles.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
• Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
• Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
• This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
• Assists Sr. Technicians in the completion of project work.

• Applicants must be at least 18 years of age and legally eligible to work in the United States.
• A valid driver’s license is required. CDL a plus.
• At least 5 years of experience in job duties.
• Sanitation or construction industry experience a plus.
• Computer diagnostic experience as diesel technician a plus.
• Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
• Working knowledge of applicable DOT and OSHA standards and regulations.
• Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
• Must be able to meet the physical and safety requirements of the position.
• Must be able to provide own tools

Work Environment

• We are continuously investing in equipment, and many of our trucks are less than 2 years old.
• Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings.
• Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
• Personal Protective Equipment (PPE) will be provided.
• The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio!  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. 

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. 

Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
• Performs repairs and assigned preventative maintenance services.
• Estimates time and material cost on vehicle repairs and requisition of new parts.
• Conduct safety checks on vehicles.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
• Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
• Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
• This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
• Assists Sr. Technicians in the completion of project work.

Work Environment

• Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times.
• Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
• The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required.

Requirements

• Applicants must be at least 18 years of age and legally eligible to work in the United States.
• A valid driver’s license is required. CDL a plus.
• At least 5 years of experience in job duties.
• Sanitation or construction industry experience a plus.
• Computer diagnostic experience as diesel technician a plus.
• Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
• Working knowledge of applicable DOT and OSHA standards and regulations.
• Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
• Must be able to meet the physical and safety requirements of the position.
• Must be able to provide own tools

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

Requirements

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.
• Preform other duties as assigned.

What We Offer?

• Competitive wage (based on experience) plus Time and a half for Overtime.
• Union Shop.
• Medical, dental, vision, life, short-term and long-term disability coverage.
• 401(k).
• Uniforms provided with laundry services.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Schedule:

Overnight Wednesday to Sunday 6pm to 5am.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

• Performs all work in accordance with established safety procedures. 
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.  
• Assists in the repair and adjustment of equipment.  
• Washes vehicles and equipment.  
• Conducts safety checks on vehicles.  
• Assists with service calls for breakdowns.  
• Perform other maintenance related work as required. 
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. 

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.Preform other duties as assigned.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

 The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

Diagnostics & Repair

• Independently diagnose and repair:
  • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
  • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
  • Air and hydraulic brake systems, ABS, and suspension components.
  • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
  • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

Preventive Maintenance & Compliance

• Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
• Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
• Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

Road Calls & Operational Support

• Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
• Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

Mentorship, Training & Documentation

• Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
• Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
• Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

School Bus & Fleet Mechanic (Class A/B/C) Belair Services – Sparta, NJ Salary: Up to $100,000 per year (based on experience) Sign-On Bonus: $1,000 Belair Services is currently hiring experienced School Bus and Fleet Mechanics in Sparta, New Jersey .

We are seeking a Class A, B, or C Mechanic with strong experience in light and medium-duty fleet vehicles , diesel and gasoline systems, and preventive maintenance.

This role is ideal for technicians with fleet maintenance, school bus repair, diagnostic troubleshooting, and electrical system experience .

ASE certification is recommended.

Compensation & Benefits Earn up to $100,000 per year (dependent on experience and expertise) $1,000 sign-on bonus Medical benefits available 401(k) retirement plan participation $500 employee referral bonus Paid vacation Paid sick leave Paid time off (PTO) Growth and advancement opportunities Clean and safe work environment Company-paid certification training and classes Supportive and energetic team atmosphere Job Summary The Fleet Mechanic / School Bus Mechanic is responsible for preventive maintenance, diagnostics, and repairs on light and medium-duty fleet vehicles and school buses .

The technician will troubleshoot mechanical and drivability issues, perform inspections, and assist other technicians when necessary.

This role requires strong mechanical skills, knowledge of diesel and gasoline engines , and familiarity with DOT inspection procedures for school buses (preferred).

Key Responsibilities Vehicle Diagnostics & Repairs Diagnose mechanical malfunctions and perform vehicle repairs on fleet vehicles and school buses.

Inspect, test, adjust, and repair systems including: Steering systems Electrical systems Cooling systems Lubrication systems Brake systems Drivetrains Suspensions Power steering units Clutches Transmissions Engine components Temperature and fuel regulation systems Perform engine adjustments, testing, and rebuilds when required.

Preventive Maintenance Perform preventive maintenance inspections (PMIs) on fleet vehicles.

Ensure vehicles meet federal, state, and local safety regulations .

Assist with DOT inspection procedures for school buses.

Repair Oversight & Documentation Obtain proper approval for major repairs before releasing vehicles.

Record time spent, parts used, and services performed.

Identify additional maintenance needs and escalate repairs when necessary.

Fleet Support Perform road calls and roadside repairs when required.

Assist and guide other technicians on complex repairs.

Maintain a clean, organized, and safe work area .

Team & Work Ethic Work independently with minimal supervision.

Demonstrate strong troubleshooting and decision-making skills.

Continuously develop mechanical knowledge and technical skills.

Minimum Requirements 3 years of experience as a Light or Medium Duty Fleet Mechanic Experience working on fleet trucks, buses, or commercial vehicles Must qualify as a Class A, B, or C Mechanic Strong diagnostic, electrical, and A/C repair skills Technical knowledge of diesel engines and gasoline systems Ability to perform preventive maintenance and complex repairs Must possess basic hand tools required for the job Valid state driver’s license ( CDL preferred ) Ability to perform road service and emergency repairs Ability to work flexible schedules when required Must be 21 years of age or older Preferred Qualifications ASE Certification School bus maintenance experience Familiarity with DOT inspection standards Advanced diagnostics and electrical troubleshooting Experience with internal engine and transmission repairs Work Environment Clean and safe maintenance facility Collaborative team environment Ongoing training and certification support Opportunities for long-term career growth ​

Job Title: Technical Project Manager

Work Location: Basking Ridge, NJ (Hybrid/Onsite)

Contract duration: 6+ Months

Visa Independent Only

Job Description:

We are seeking a highly experienced Technical Project Manager with 15+ years of experience to lead critical initiatives in Packet Broker systems for a Tier-1 telecom client. The ideal candidate will possess a strong balance of technical depth (Java/J2EE, architecture), AI/ML lifecycle expertise, and proven delivery leadership in large-scale, mission critical telecom environments.

• This role requires onsite presence at the Verizon Basking Ridge, NJ office, and the ability to manage complex, high-visibility programs with multiple stakeholders.

Key Responsibilities

Project & Delivery Management

• Lead end-to-end delivery of Packet Broker–related programs, including planning, execution, monitoring, and release management.

• Manage scope, schedule, budget, risks, dependencies, and quality across multiple engineering teams.

• Delivery - ensuring committed milestones are met with predictable outcomes.

• Act as the single point of accountability for client communication, status reporting, and escalation management.

Technical & Architecture Leadership

• Provide Technical oversight for the project

• Review system designs for scalability, performance, security, and regulatory compliance.

• Guide development teams with hands-on expertise in Java/J2EE, microservices, APIs, and distributed systems.

• Collaborate with solution architects to evolve the target-state architecture and reduce technical debt.

AI / Intelligent Automation Enablement

• Drive adoption of AI-enabled solutions across the delivery lifecycle, including:

• AI/ML lifecycle management

• NLP and LLM-based use cases (automation, analytics, decision support)

• Tool evaluation, integration, and governance

Stakeholder & Client Management

• Partner closely with client leadership, product owners, engineering teams, and vendors.

• Manage expectations in a high-pressure, production-critical environment.

• Provide executive-level dashboards, metrics, and insights to leadership.

Team Leadership

• Lead and mentor global onshore/offshore teams.

• Foster a culture of technical excellence, accountability, and continuous improvement.

• Support hiring, onboarding, and performance management for critical roles.

Mandatory Skills & Qualifications

• 15+ years of experience in technical project / program management.

• Strong domain experience in Telecom systems.

• Architecture skills for large-scale distributed systems.

• Hands-on Java & J2EE experience (Spring, microservices, REST APIs, UI technologies – React JS ).

• Solid understanding of AI/ML, NLP, LLMs, including lifecycle and tooling.

• Excellent communication, leadership, and stakeholder management skills.

Preferred Background

• Prior experience in Nokia, Samsung, Ericsson, Cisco, Ciena, or FAANG product organizations.

• Experience working directly with Verizon or Tier 1 telecom operators.

• Exposure to cloud-native platforms, containers, CI/CD pipelines.

• Experience managing programs with strict SLAs and regulatory requirements.

Education & Certifications

• Bachelor’s or Master’s degree in Computer Science, Engineering, or related field.

• PMP / SAFe / Agile certifications

• Cloud or Architecture certifications

• AI/ML-related certifications (good to have)

Our client, a well-established leader in industrial manufacturing solutions, is seeking a Technical Sales Representative with strong cutting tool and metal cutting experience to drive growth across distribution channels and end-user accounts.

This role is ideal for a sales professional with hands-on chip making knowledge who understands machining processes at a technical level and can confidently consult with manufacturing engineers, machinists, production managers, and procurement teams.

Position Overview:

The Technical Sales Representative will be responsible for growing revenue within an assigned territory by promoting high-performance cutting tools, carbide inserts, indexable tooling, solid carbide end mills, drills, reamers, and metal removal solutions. The successful candidate will combine industrial sales expertise with a deep understanding of CNC machining, feeds and speeds optimization, tool geometry, carbide grades, coatings, and metal cutting applications.

This is a consultative, solution-based sales role focused on supporting both industrial distributors and end-user manufacturing facilities, including job shops, production machining environments, and OEM manufacturers.

Key Responsibilities:

• Drive territory sales growth of cutting tools and metal cutting solutions through both distribution partners and direct end users
• Provide technical application support on CNC milling, turning, drilling, and chip making operations
• Advise customers on proper feeds and speeds, tooling geometry selection, carbide grades, coatings, tool life optimization, and cycle time reduction
• Conduct onsite visits to evaluate machining processes and recommend productivity improvements
• Collaborate with manufacturing engineers and machinists to improve surface finish, tool performance, and cost per part
• Develop strong relationships with industrial distributors while expanding penetration within end-user accounts
• Identify opportunities for process improvement, tooling standardization, and metal removal efficiency
• Support new product introductions and promote advanced tooling technologies

Qualifications:

• Proven experience in cutting tool sales, industrial tooling sales, or metalworking sales
• Strong technical understanding of chip making processes, CNC machining, feeds and speeds calculations, tool geometry, and carbide grades
• Experience calling on industrial distribution networks and end-user manufacturing accounts
• Knowledge of metal removal applications including milling, turning, drilling, tapping, and boring
• Ability to communicate effectively with machinists, programmers, production supervisors, and engineering teams
• Demonstrated success in territory management, account development, and consultative technical sales

What We’re Looking For:

We are seeking a driven sales professional who can bridge the gap between technical machining knowledge and revenue growth. The ideal candidate understands how cutting tool performance impacts throughput, scrap reduction, machine utilization, and overall manufacturing productivity.

If you have a background in industrial sales, machining, metal cutting, carbide tooling, or CNC applications engineering and are ready to leverage that expertise into a high-impact technical sales role, we want to hear from you.

**This position is 5 days onsite**

We are seeking a driven and detail-oriented Purchasing Buyer to be responsible for selecting and purchasing quality products for our business. Responsibilities will include processing purchase orders, negotiating with suppliers, tracking orders, creating and maintaining an inventory, quality assurance and liaising with inventory teams and management. The buyer will work with staff across departments to forecast the needs of the business and make purchase decisions based on demand.

The Buyer should be analytically minded and possess excellent negotiating skills to secure the best prices according to budget. Knowledge of sales and marketing principles is advantageous.

Buyer Responsibilities:

• Research, select and purchase quality products and materials.
• Build relationships with suppliers and negotiate with them for the best pricing.
• Process requisitions and update management on status of orders.
• Update inventory and ensure that stock levels are kept at appropriate levels.
• Arrange transport of goods and track orders to ensure timely delivery.
• Analyze market trends and apply this knowledge to make insightful buying decisions.
• Coordinate with inventory team, management, and stockroom as required.
• Assess quality of stock received and escalate any discrepancies to suppliers and management.
• Ability to travel.

Buyer Requirements:

• Bachelor's Degree in Supply Chain, Engineering, Business Administration, etc.
• Strong communication skills, both written and verbal. Urgent and aggressive. Outgoing
• Relevant experience preferred.
• Excellent computer skills (Excel, Microsoft Word, PowerPoint).
• Detailed Oriented.
• Proficient in Microsoft Office applications.
• Critical thinking and negotiation skills.
• Occasional domestic travel.
• 2-4 years minimum of industrial or supply chain buying experience

Responsibilities:

• Draft electrical, software, computer, business method, and mechanical patent applications.
• Draft responses to patent application office actions.
• Research and prepare opinions related to patentability, patent validity, freedom to operate and infringement.
• Docketing via DocketTrak docketing system.

· Electronic filing of IP cases via the USPTO's EFS-WEB online filing system.

· Preparation of patent filings.

· Preparation and transmission of form cover letters.

• Assist with IP-related agreements and transactions.
• Assist in other legal matters as needed.

Qualifications/Requirements:

• A technical degree, preferably in electrical engineering, computer science, or an equivalent degree.
• Strong written and oral communication skills.
• A strong attention to detail.
• Ability to quickly identify and prioritize issues.
• Knowledge and command of U.S. Patent Office procedures.
• Experience with DocketTrak docketing software preferred but not required.
• Experience with EFS-WEB online filing system preferred.
• One – three years patent attorney experience but willing to train the right candidate; including 3 year law students with immediate availability.
• DETAIL-ORIENTED.
• Strong organizational skills.
• Strong computer skills including Microsoft Word, Excel, and Outlook required.
• Experience with USPTO online filing systems a requirement.
• A college degree and juris doctorate required.

If you would like to apply for this position please forward the following information to for immediate consideration:

• Resume
• Salary requirements

NO PHONE CALLS OR FAXES.