Engineering Jobs in Ferris, TX
5 positions found
MEP Coordinator
Location:
Red Oak, TX
Job Id:
881
# of Openings:
1
TITLE: MEP Coordinator
LOCATION: Red Oak, TX * Night Shift (can be either 6pm to 6am or 4pm to 4am)
POSITION SUMMMARY:
The MEP Coordinator is responsible for the specific mechanical and electrical construction of Mission Critical facilities (e.g., data centers) and other related construction projects. This position will supervise the Mechanical and Electrical trade contractors and equipment vendors involved in the project and coordinate all Mechanical and Electrical schedules, develop reports, follow processes, and complete documentation from pre-construction thru close-out.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Review Contract Documents, making suggestions/modifications as they relate to the MEP tradesandapproved constructiondrawings.
* Review Basis of Design for MEP compliance.
* Primary Responsibility for review and coordination of all MEP submittals to ensure all documentation is complete and comprehensive.
* Assist Superintendent and Field Staff in managingMEP subcontractors throughout duration of the project (fromgroundbreaking throughcommissioning andturnover toowner).
* Assist with scheduling and coordinatingMEP installation activities. Ensure compliance with all approved documentation.
* Work with Superintendent on project logistics and temporary facility plans.
* Attends daily and weekly coordination meetings with Owners, Architects and Subcontractors.
* Attend BIM coordination meetings and provide assessment for MEP systemsrouting and coordination with trades.
* Review shop drawings for project requirements and serviceability, etc.
* Assist project managers in estimating/analyzing MEP change requests for accuracy of scope.
* Inspect allmaterial and equipment for MEP systems prior to installation.
* Monitor the installation and start-up of MEP systems and commissioning of project with Engineer, Commissioning Agent and Owner. Schedule and manage MEP meetings.
* Review Coordination and Arc Flash studies.
* Review and provide field verification oftorque andmeggerreports provide by trades,and assure reports are submitted during final turnover.
* Coordinate equipment deliveries, rigging and other related activities with ProjectSuperintendentand Field Staff.
* Communicate progress and prepare appropriate reports as needed(Procore).
* Represent CPGregardingthe MEP process at weekly Owners andcontractors'meetings.
* Lead and direct the coordination process to resolve all conflicts duringinstallationsand start-up.
* Safety standards knowledge and enforcement. (OSHA 30 Hour preferred)
*Schedule shifts may incl nights/weekends as per bell curve requirements
* Perform other duties as assigned.
Must be a US CITIZEN
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management.
* Minimum 3-5 years MEP field experience as well as previous construction experience.
* Strong construction knowledge and plan reading abilities
Computer Skills:
* Proficient in Microsoft Office or related software.
* Proficient in PROCORE
Certificates and Licenses:
* No certificates or licenses required
Supervisory Responsibilities:
* No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Occasionally lift and/or move up to25pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact withother individuals. Frequent sitting, standing, and walking. Work is performedprimarilyindoors.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Quality Assurance Manager
American Bath Group (ABG) is a leading manufacturer of high-quality bathware products for residential and commercial markets across North America. Built on innovation, craftsmanship, and continuous improvement, ABG delivers products designed to enhance everyday life.
We are seeking a skilled Quality Assurance Manager to strengthen plant quality systems, reduce defects, and drive operational excellence.
Position Summary
The Quality Assurance Manager oversees all quality control and quality assurance functions within a fast-paced manufacturing environment. This role ensures products meet specifications, regulatory standards, and customer expectations. You will lead quality strategy, partner with production and engineering, and foster a culture of continuous improvement.
Primary Responsibilities
- Lead and maintain the plant’s Quality Management System (QMS) to ensure compliance with company and industry standards.
- Conduct audits, inspections, and process reviews to identify quality gaps and implement corrective actions.
- Collaborate with Production, Engineering, and Supply Chain to improve processes and reduce waste, scrap, and rework.
- Create control plans, operator check sheets, and documentation for new and existing processes.
- Verify product conformance throughout manufacturing and resolve nonconformances.
- Maintain documentation for quality policies, procedures, tests, and audit records.
- Establish and track quality KPIs related to defects, efficiency, and process stability.
- Lead root cause analysis, problem-solving, and corrective action initiatives.
- Promote a quality-first culture and provide coaching on standards and expectations.
Required Skills & Abilities
- Strong understanding of QMS, ISO principles, Lean, and continuous improvement tools.
- Proficiency in quality auditing, root cause analysis, and structured problem-solving.
- Strong leadership and communication skills; able to influence cross-functional teams.
- Proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint).
Education & Experience
- High school diploma or equivalent required; associate’s or bachelor’s degree preferred.
- Minimum of 5 years of experience in quality control, quality assurance, or manufacturing quality leadership.
Physical Requirements
- Ability to stand, walk, and move throughout a manufacturing facility.
- Ability to lift up to 50 lbs occasionally.
- Comfortable working around production equipment and varying temperatures.
Why Work for American Bath Group?
ABG offers a stable, growing environment where quality leaders can make a measurable impact. You’ll have the autonomy to drive improvements, strengthen processes, and contribute to a culture rooted in collaboration, integrity, and continuous improvement. We invest in our people and provide meaningful opportunities for long-term career growth.
Equal Employment Opportunity Statement
American Bath Group (ABG) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability, veteran status, gender identity, sexual orientation, or any other protected characteristic
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.50
- $41.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $33.00
- $47.75 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
