Engineering Jobs in Farmers Branch

Midea America Corp. is one of the world’s largest home appliance brands, offering the most comprehensive selection of products in the world to fully serve the needs of day-to-day living at home, at work, or anywhere else you go. In North America we strive to aim high, put the customer first, transform and innovate the marketplace, utilizing our commitment, dedication, inclusion and partnership with our teams. We are a global company with over 150,000 employees and operations in more than 195 countries. As a publicly listed company, we are also ranked #245 as a Fortune Global 500 company and offers one of the most comprehensive ranges in the home appliance industry. Midea America is a subsidiary of Midea with over 200 employees in the US and we are expanding our presence in North America.

Know more about Midea Group.

Staff Engineer-Scroll Compressor Motor Design

Location: Plano, Tx

**Job Responsibilities**

1．Responsible for the planning of the new generation of scroll compressor platform motor to ensure the technological leadership of motor design;

2. Responsible for the formulation of motor prototype plans, and cooperate with the trial production department to complete the trial production of compressor prototypes;

3. Responsible for formulating motor and compressor test and verification plans, coordinating electronic control matching, completing the analysis of motor efficiency, cost, and noise data, and making breakthroughs in core technical problems.

4. Responsible for compressor motor fault diagnosis and analysis, formulating response and improvement plans, and conducting verification tests to ensure that the problem is effectively solved.

5. Pay attention to the development trend of related motor technology inside and outside the industry, and be responsible for the research and introduction of new materials and process technologies.

**Qualifications**

1. Master's degree or above, major in electrical engineering, electrical engineering, electrical and electrical appliances, etc.;

2. More than 7 years of work experience in the motor industry major, preferably in the compressor motor industry;

3. Proficient in using at least one 3D drawing software such as Creo, UG, Solidworks, etc., familiar with AutoCAD, proficient in drawing and drawing, and proficient in Ansys (or Jmag, Flux, etc.) electromagnetic analysis software;

4. Familiar with motor principles, motor design & test evaluation process, and experience in the design & improvement of motor performance and reliability related impact indicators;

5. Familiar with the process flow and control points of the electrical machine; We have rich experience in the evaluation and reliability of motors.

Midea America Corp is an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage, and display, in nurturing the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean,n and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers, and manufacturing facilities, which are spread over nearly 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers, and 48 manufacturing facilities worldwide

Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, CDP recognized Delta with leadership-level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.

Job Description:

Under moderate supervision, performs one or more of the following duties and responsibilities:

• Electrical design of power systems for data centers and large facilities.

• Have a strong work ethic and possess a level of personal and professional integrity

• Interface with suppliers on product design and cost issues.

• Ability to communicate technical knowledge clearly and understandably.

• Must work well and contribute in a team environment.

• Provide technical guidance and support to other team members

• Troubleshoot and resolve issues related to electrical engineering projects

• Ensure compliance with all applicable codes and regulations

• Develops engineering documentation as required.

Education:

• Required BSEE. MS & Ph.D is a P

Job Experience:

• 10 years of experience developing electrical products for mission-critical facilities is preferred.

• Solid understanding of AC and DC power distribution circuits, including low voltage 3phase AC circuits, low voltage electrical distribution systems, and associated power management.

• Extensive expertise in understanding equipment power needs, encompassing large-scale standby and emergency power systems, such as UPS, PDU, Generator, and STS systems.

• Knowledge of power systems engineering and system control/metering. Familiar with Simulation. Cad tools

• Firm understanding of Mechanical equipment and system design

• Demonstrated knowledge of various engineering concepts and practices, including electrical design and engineering principles. Ability to understand and resolve moderately complex technical issues is required.

• Firm knowledge of building ground architecture and grounding techniques.

• Good knowledge of Telcordia, UL, National Electric Code, IEEE, and NEBS standards/requirements.

• Experience in Protective Device Coordination study and Arc Flash study is preferred.

Technical/ Professional skills:

• Engineering and Technology: knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production.

• Professional Engineering License and knowledge of building codes is a plus

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Summary

• This position is located in our Plano facility*

Provides direct and indirect supervision to subordinate managers and employees performing diverse roles within large sites. This includes establishing three- to five-year plans/objectives, and developing policies for the function/unit. Accountable for projects or programs on a multi-functional, national, or regional basis. Work is guided by broad site objectives and corporate policy. Work requires developing solutions, precedents, and/or policies. Receives assignments in the form of objectives and sets goals to achieve objectives. Establishes long-term plans/objectives and recommends changes to policies. Develops department budgets and goals. Erroneous decisions or failure to achieve goals results in critical delay in schedules and/or unit operation and may also have a company-wide affect. Provides direct supervision to others, or indirect through subordinate supervisors, and coordinates the activities of a section or department with responsibility for results in terms of costs, methods, and employees. Reviews employees’ performance and recommends employee compensation; coaches for improved performance and disciplines as necessary. Provides final approval for subordinate managers’/supervisors’ salary and performance recommendations. Builds cross-functional relationships where persuasive skills, negotiation skills, and considerable tact are required to gain support. Interacts regularly with senior management or executive levels on matters concerning several functional areas, divisions and/or customers. Maintains positive relationships with key customers, suppliers, etc., who have a significant impact on the success of the organization.

Detailed Description

Perform tasks such as, but not limited to, the following:

• Manages a team of professionals providing expertise in engineering operations in support of production business units.
• Manages engineering projects for development and production.
• Responsibilities include providing project definition and metrics, resource allocation, budget development and management, schedule management, task prioritization, contingency planning, project and program review.
• Communicates progress and results to senior management and customers.
• Works with Corporate and other Technical Managers to develop and maintain a process for determining which projects to staff based on customer demands and industry trends.
• Manages a team of professionals whose responsibilities are to work jointly with purchasing to establish and maintain sources of supply for mechanical parts and assemblies to specific criteria of cost and quality.
• Resolves all technical issues with suppliers, continually looks for ways to reduce part costs and drive continuous quality improvement of purchased material.
• Works closely with customers’ supply chain management and development organizations.
• Acts as internal consultant in CDM application systems & processes to all sites regionally/globally.
• Provides integration support to new sites on CDM applications and processes.
• Develops solutions based upon existing knowledge, and leveraging industry and other sites capabilities.
• Ensures we are providing best of breed solutions in areas such as product/engineering data exchange, data issues resolutions, data setup integrity and customers data collaboration.
• Assists in contract negotiations with SCM and Engineering management.
• Represents CDM and supports all sites in NPI/NCI/Bid process development and execution.
• Assists/Leads the Design and development of global CDM strategies, identifying gaps between current and best practices internally and externally.
• Leads cross-functional global teams including consultants and vendors to develop leading edge solutions.
• Manages, leads, and develops group of CDM employees.

Knowledge/Skills/Competencies

• Engineering Foundation Competencies
• Understanding of competitor's pricing models.
• Knowledge of competitive benchmarks for pricing of specific product types.
• Knowledge of mechanical parts manufacturing processes.
• In-depth knowledge and understanding of manufacturing processes and equipment.
• In-depth knowledge of quality improvement practices and techniques.
• Ability to plan for and coordinate a wide variety of resources to meet production quality and quantity metrics.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train, coach and motivate a diverse group of employees to achieve high production levels within tight time deadlines and in a highly dynamic manufacturing environment.
• Ability to use some or all of the following PC applications: Word, Lotus Notes, Excel, PowerPoint.
• Excellent negotiation, problem resolution and project management skills.
• Ability to plan strategically for the coordinated delivery of a variety of materials.
• Strong analytical and statistical skills.

Physical Demands

• Incumbent will perform the duties of this position in a normal office environment.
• Duties may require periodic sustained visual concentration on a computer monitor or on numbers and other detailed data.
• May require occasional travel.

Typical Experience

• Nine plus years’ relevant experience.

Typical Education

• Bachelor’s degree in related field, or consideration of an equivalent combination of education and experience. Advanced studies in Business/Operations/Technology are recommended.
• Educational requirements may vary by geography.

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

This policy applies to hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral and other aspects of employment and also states that retaliation against a person who files a charge of discrimination, participates in a discrimination proceeding, or otherwise opposes an unlawful employment practice will not be tolerated. All information will be kept confidential according to EEO guidelines.

Celestica is an E-Verify employer.

Company Overview

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

We are seeking a talented UX / UI Designer (Product Owner - Marketing Technology) to elevate the end-to-end customer experience across our web platform, mobile applications, kiosks, and in-store digital touchpoints. This role is responsible for translating user needs and business requirements into intuitive, visually compelling, and functional designs that enhance engagement, usability, and brand consistency.

You will collaborate closely with product managers, software engineers, and business stakeholders to design and implement user-centered solutions from concept through launch.

Key Responsibilities

• Improve and maintain the company’s web, mobile app, kiosk, and in-store digital experiences, ensuring consistency and usability across all platforms.
• Gather and analyze customer and end-user requirements through interviews, feedback sessions, analytics, and stakeholder collaboration.
• Design, architect, and implement user flows, wireframes, mockups, and interactive prototypes for new features and enhancements.
• Conduct usability testing (moderated and unmoderated), analyze results, and iterate designs based on insights and user behavior.
• Collaborate with cross-functional teams to translate business needs into user-centered design solutions.
• Work directly with the software engineering team to ensure accurate and efficient implementation of designs.
• Maintain and contribute to design systems, UI standards, and style guides.
• Ensure designs meet accessibility, usability, and brand standards.

Required Qualifications

• Bachelor's Degree - (Marketing Tech, IT or related field preferred but not required)
• Full-Time Experience - At least 3 years of full-time on-the-job experience in the UX / UI Design profession.
• Proven experience as a UX / UI Designer for web, mobile applications, Kiosk and in-store
• Proficiency in industry-standard design and prototyping tools, including:
• Adobe Creative Suite, Figma, Sketch, Adobe XD, InVision
• Strong understanding of user-centered design principles, interaction design, and visual hierarchy.
• Hands-on experience conducting usability testing and applying insights to iterate designs.
• Ability to clearly communicate design concepts to both technical and non-technical stakeholders.
• Experience working closely with engineering teams in an agile or iterative development environment.

Role Overview

Noble 33 is a premier national restaurant group dedicated to delivering exceptional dining experiences through innovative design and operational excellence. The Construction Project Manager role oversees construction from early planning through turnover, ensuring projects are delivered on time, on budget, and to the highest brand and quality standards.

This role partners closely with internal teams and external partners to support Noble 33’s multi-unit growth and reinvestment strategy while building scalable processes that drive efficiency, consistency, and long-term asset performance.

Key Responsibilities

• Lead all phases of construction for new restaurant openings and capital projects.
• Support project goals through early feasibility assessments, cost estimating, value engineering, and risk mitigation.
• Develop and manage project budgets, schedules, and quality benchmarks to ensure timely, cost-effective delivery.
• Provide clear, consistent reporting to senior leadership on project status, budgets, schedules, risks, and key performance indicators.
• Build scalable construction processes, standards, tools and reporting to support a multi-unit growth pipeline.
• Identify opportunities for continuous improvement, innovation, and efficiency in construction methods and project delivery.
• Lead bidding, estimating, contract negotiation, and procurement efforts to reduce build costs and maintain schedules.
• Oversee active construction sites to monitor progress, resolve issues, and ensure adherence to safety, quality, and brand standards.
• Proactively identify risks and develop mitigation strategies to minimize delays, cost overruns, and operational impact.
• Implement quality assurance and inspections processes to ensure consistency across projects.
• Ensure smooth turnover to Operations with a focus on long-term asset management and facility performance.
• Partner closely with Design, Operations, and Finance to align project execution and business objectives.

Requirements

• 5+ years of construction management experience in a multi-unit restaurant or hospitality environment.
• Bachelor’s degree in Construction Management, Engineering, Architecture or related field.
• Strong understanding of building systems, particularly MEP as it relates to food service.
• Strong financial acumen with experience managing budgets, estimating, and scheduling.
• Proven success negotiating construction contracts and leading external partners.
• Knowledge of building codes, OSHA, NSF, and local jurisdictional requirements.
• Excellent verbal and written communication skills, and strong organizational skills.
• Excellent interpersonal skills with the ability to manage sensitive and confidential situations with tact, professionalism, and diplomacy.
• Ability to work independently and handle multiple tasks simultaneously.
• Proficient with Microsoft Office Suite, Procore and Bluebeam.
• Willingness to travel to various Noble 33 locations as needed, estimated 50% travel.
• Prolonged periods of sitting at a desk and working on a computer.
• Must be able to lift up to 15 pounds at times.
• PMP or other relevant certifications preferred.

What We Offer

• Competitive salary and performance bonuses
• Health, dental and vision insurance
• Employee discounts on dining experiences and other services
• Opportunities to learn and lead, with support for career growth
• Paid time off, paid sick leave, and flexible scheduling

This position is open to candidates located in Plano, TX (on-site) or Chicago, IL (remote).

We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, disability, veteran status, or any other characteristic protected by applicable law.

If you require a reasonable accommodation to complete the application or interview process, please contact Human Resources at We are committed to providing reasonable accommodations in accordance with applicable law.

JOB SUMMARY

The Marketing Analyst job is customer-facing and focuses on expanding customer acquisition and engagement capabilities for ARGO’s Connects product suite for the Financial Services industry.

The Marketing Analyst role encompasses ensuring ongoing product suite market competitiveness and solution delivery readiness to Argo’s Financial Services customers. The Connects solution extends customer experience and engagement throughout the customer's journey. It supports acquisition, fulfillment, service, retention, and risk management. It meets the needs of both individual and business customers in an Omni-channel world.

The Marketing Analyst will be responsible for working with Argo’s client’s to optimize their usage of the Connects solution for customer engagement campaigns through all stages of the customer journey from a lead thru conversion using insightful analytics to help better understand the client’s end users and reporting back with easy to understand data visualization and clear solutions. Your role will continue post client implementation to ensure our clients are getting the full value of our solutions.

EXPECTED WORK AND PERFORMANCE

Job duties and responsibilities include the following. Other duties may be assigned as needed.

1. Marketing Plans

a. Have an in-depth understanding and the application of customer journey stages, especially how our solution generates earlier engagement in the Awareness and Consideration phases of the journey.

b. Create best practice methods and specific customer engagement campaign models using scientifically proven engagement methods.

c. Plan, develop, and monitor digital (email and SMS) campaign performance and channel tracking.

d. Translate requirements into technical specifications for development, data, and reporting teams and, conversely, technical approaches into easily digestible insights.

2. Client (Customer) Engagement

a. Define, design, and communicate storyline and demonstration on value proposition to customers.

b. Create best practice-based templates to facilitate rapid customer implementation.

c. Define and design campaigns for each stage of the customer journey, from prospect nurturing through awareness, influencing conversion, onboarding, soliciting feedback, customer management, retention, and relationship expansion,

which are automated, and staff led to optimize use of staff?

d. Recommend campaign optimizations to reduce customer friction and increase customer engagement.

e. Devise and evaluate methods for collecting data, such as surveys, questionnaires, focus groups, opinion polls, etc., interpret, organize, and present actionable findings to clients.

f. Serve as the voice of our customers, understanding their needs for topics including surveys and campaigns and communicate those to both Argo and Client teams.

3. Marketing Research

a. Research and recommend marketing constructs that will benefit both Argo and client (Relevance by market segment, etc.)

b. Conduct competitive research, analyze benchmarking data, and provide value add recommendations.

c. Analyze current/ongoing targeting strategies to define and implement new opportunities for media optimization, including A/B testing of delivered content and success ratios.

d. Content types and uses for Awareness and Consideration – effectiveness research – video, text, pictures, infographics (what should we consider for product knowledge and education)

e. Research, recommend, and obtain digital marketing certifications for our staff that increase our value proposition to customers as directed.

4. Marketing Automation

a. Oversee the marketing automation strategy inclusive of customer journey framework, customer data platform (CDP), segmentation and customer preference management, content and creative, targeting and list management in collaboration with technical teams.

b. Define marketing process around single and multifunctional campaigns across multiple channels, Including A/B testing. campaigns for prospect nurturing and lead generation i.e. conversion to customer.

c. Create and document best practices for customer delivered content (Email, SMS) with a focus on creating compelling calls to action (CTA)

d.

e. Ensure marketing automation tools are intuitive and easy to use.

f. Research and document plans for integration to third-party advertising such as Google – relevant methods, integration, documenting relevance to Argo solutions for customer engagement solutions and how Argo would utilize.

g. Linked In – research for business customer segment, and document relevance and potential integration into Argo solutions.

h. Research use and relevant of Social Media platforms to Argo solutions – research, pros, cons, relevance for us to consider. Document universe of “applicable” integration points

5. Performance Results - Reporting and Analysis

a. Evaluate target demographics, appropriate distribution channels and marketing outlets.

b. Interpret performance results using data science models, draw conclusions about findings.

c. Measure, evaluate and report on the effectiveness and ROI of marketing channels, methods, strategies, and digital marketing campaigns.

d. Have knowledge of customer segments, collect, and analyze data regarding customer preferences, demographics, buying patterns, habits, and needs to better identify market potential and factors influencing product demand.

e. Study and understand the behavior and expectations of online users with ability to communicate out the customers experience and behaviors. Such as customer intent and effectiveness of the sales funnel.

f. Create and communicate informative reporting that highlights marketing KPI’s like leads, conversion rates, website traffic and social media engagement and highlights relevant business trends and opportunities for improvement.

g. Measure results from customer Net Promoter Score (NPS) and satisfaction questionnaires across customer segments to drive an active feedback loop for marketing strategies.

QUALIFICATIONS

• 5+ years of marketing experience with a minimum of 3+ years of digital marketing experience in sales campaign execution, online commerce, survey tools or related fields

o Experience in Financial Services preferred.

o Experience and responsibility for direct-to-consumer marketing through digital and retail channels such as consumer goods, financial services, with direct-to-customer experience in acquisition, relationship, and retention management.

o Knowledge of the psychology of consumer buying patterns and behaviors

• Education - Bachelor’s Degree with studies in Marketing, Market Research, Business Administration or similar

• Able to travel to customer sites or industry events up to 15% of the time.

REQUIRED SKILLS / EXPERIENCE / KNOWLEDGE

The Marketing Analyst is a subject matter expert with direct-to-consumer sales and marketing experience.

Candidate should have detailed knowledge of:

• Marketing campaign execution

• Customer Journey Mapping and experience optimization

• Customer survey and measurement programs including Voice of Customer NPS

• Data visualization tools

• Knowledge of common CRM programs such as SalesForce

Candidate should have a good balance of knowledge in areas such as:

• Working knowledge of search engines, web analytics and business research tools

• Communication Skills - proven ability to communicate effectively both written and verbally with customers at all levels – from end-users to management.

• Analytical skill to convert data into presentable and consumable formats, strong quantitative analytical and critical thinking skills.

• High degree of IT Automation literacy including:

o The ability to recognize, understand, and effectively use technology concepts in your day-to-day job functions including training, implementation, and testing.

o A working knowledge of the technological systems and their makeup (hardware and software components) used in branch automation solutions.

o A general understanding of data constructs (where is data stored, what systems “own” the data, system of record) what is the availability of data and KPI’s numerical interpretation)

ATTENDANCE/WORK LOCATION

The position is based in our Richardson, TX Headquarters. Daily physical presence in the office is required for interaction with co-workers, attending meetings, and for collaboration on projects.

PHYSICAL DEMANDS

While performing the duties of this job, the employee is regularly required to stand, walk; sit stationary; constantly operate computer keyboarding and office equipment. talk or hear, to communicate with employees, and/ or customers (must be able to exchange accurate information in various situations). The employee is required to regularly communicate with other employees, confer or coordinate with other employees. While performing their duties the candidate must be able to travel overnight, including occasional weekends.

DISCLAIMER

Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.