Engineering Jobs in Everett

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

BCA In-Service Safety Organization is looking for a Mid-Level (Level 3) or Senior (Level 4) Airworthiness & Regulatory Specialist to join our team in Everett, Washington .

Are you passionate about safety and compliance? Would you like to contribute to the world’s safest transportation system?

As an investigator in the Boeing Commercial Airplanes (BCA) Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Boeing product safety by maintaining and restoring compliance with regulatory requirements.

Investigations typically follow the Boeing Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.

We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues.  As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.

As a strong component to product safety and compliance, we recognize that a variety of different

thoughts, contributions, backgrounds and opinions are necessary in order to make the safest product we can.

We enjoy a good work-life balance, although occasional overtime may be required for urgent items.

Come join the BCA S&CI team to help ensure our products remain the safest form of travel available into the future!  

Position Overview:

• For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
• We coordinate closely with Boeing functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
• We work with the functional groups within Boeing to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
• We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
• We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Boeing Enterprise.
• Leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process for issues related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances.
• Coordinates closely with Boeing functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and Resolution.

Basic Qualifications (Required Skills and Experience):

• Level 3: 6+ years of related work experience or an equivalent combination of education and experience
• Level 4: 10+ years of related work experience or an equivalent combination of education and experience

Preferred Qualifications (Desired Skills and Experience):

• Experience applying Root Cause Corrective Action (RCCA), or other similar rigorous problem/analysis/resolution, processes to engineering development and manufacturing/production efforts
• Experience with the commercial airplanes certification process
• Experience and familiarity with FAA processes and procedures and ODA and Applicant roles
• Experience working with FAA or other regulatory agencies
• Experience working in one or more of the follow aircraft systems: fuel, fire detection and extinguishment, hydraulics, environmental controls, mechanical flight controls, landing gear
• Pilot’s license or pilot experience
• Airframe & Powerplant (A&P) License

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range :

• Mid-Level (Level 3): $102,000.00 - $138,000.00
• Senior (Level 4): $127,500.00 - $172,500.00

#CASO

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is seeking a Mid-level (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer (Regulatory Compliance) to join our team in Everett, WA.

Are you passionate about safety and compliance? Would you like to contribute to the world’s safest transportation system?

As an engineer in the Boeing Commercial Airplanes (BCA) Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Boeing product safety by maintaining and restoring compliance with regulatory requirements.

Investigations typically follow the Boeing Problem Solving Model (BPSM) process, which provides a

structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.

We value the ability to communicate complex technical issues with a large variety of audiences, to lead teams comprising of multiple disciplines, and to apply airplane level thinking to a variety of technical issues. As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.

As a strong component to product safety and compliance, we recognize that a variety of different

thoughts, contributions, backgrounds and opinions are necessary in order to make the safest product we can.

We enjoy a good work-life balance, although occasional overtime may be required for urgent items.

Come join the BCA S&CI team to help ensure our products remain the safest form of travel available into the future!

Position Overview:

• Leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process for issues related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances.
• Coordinates closely with Boeing functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
• Works with the functional groups within Boeing to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
• Coordinates closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
• Partners with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Boeing Enterprise.

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience
• Excellent written and verbal communication skills
• Experience managing and/or leading a team either formally or informally, with the ability to provide guidance, mentorship, and support to team members
• Experience leading cross-functional teams
• Ability to take ownership of work activities to ensure they are completed accurately and efficiently

Preferred Qualifications (Desired Skills and Experience):

• Master's degree in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• Experience analyzing and presenting data
• Experience in a role developing, leading, and executing projects and utilizing project processes / skills
• Experience with aircraft design, certification, integration, or related field
• Experience do you have in customer relationship development, promoting long term account plans, and growing trusting relationships
• Experience with the commercial airplanes certification process
• Experience and familiarity with FAA processes and procedures and ODA and Applicant roles?
• Experience do you have working in one or more of the follow aircraft systems: fuel, fire detection and extinguishment, hydraulics, environmental controls, mechanical flight controls, landing gear
• Pilot’s license or pilot experience
• Airframe & Powerplant (A&P) License

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range :

• Mid-Level (Level 3): $114,750.00 - $155,250.00
• Senior (Level 4): $141,100.00 - $190,900.00

#CASO

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

In partnership with our Director of Engineering, Staff, and Clients, the Building Engineer II will work to meet

the evolving maintenance demands of the Portfolio to ensure a superior level of professionalism regarding

all maintenance requirements, including prompt response to and resolution of client and property

occupant requests or concerns.

KEY RESPONSIBILITIES &DUTIES

• Proactively support the development and successful implementation of the preventative

maintenance program for the portfolio

• Perform scheduled maintenance and repairs in accordance with license(s) held
• Perform scheduled inspections, complete, and submit forms and/or checklists accurately and on

time

• Note items on inspection checklist which require follow up or additional work; communicate

findings with Chief and/or client

• Provide recommendations to Chief Engineer and/or client regarding needed repairs or services
• Act as lead of other Engineers as requested
• Read and understand operations manuals, constructions drawings, diagrams, and work orders

necessary to perform maintenance and other work

• Maintain appearance of property to Facilities Partners and Client’s standards
• Collaborate with other contracted vendors, and ensure quality of work performed by them
• Review, monitor and/or provide scope and specifications for contracted property services
• Partner with Chief and/or client to develop specifications for contracted services
• Respond to and resolve tenant service requests in accordance with license(s) held (e.g., replace

ballasts, repair plumbing, etc.)

• Provide excellent customer service by interacting in a professional and positive manner with

clients, vendors, co-workers, etc.

• Support annual operating and capital budgeting process as requested
• Use a variety of hand and power tools following all safety practices
• Maintain a safe, clean, and organized work environment at all times
• Attend monthly safety trainings and follow all safety procedures
• Report all accidents immediately
• Be aware of and report all potential safety hazards immediately
• Other job duties as requested

WORK ENVIRONMENT

While performing the duties of this job, the employee is frequently exposed to fumes, loud noise,

airborne particles and both hot and cold temperatures.

PHYSICAL REQUIREMENTS

While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 10 pounds and sometimes more than 10 pounds and rarely over 50 pounds. The employee must frequently climb a ladder. Specific vision abilities are required to do this job including close vision, distance vision, peripheral vision, depth vision and the ability to adjust focus. The employee must frequently drive an automobile.

EDUCATION & EXPERIENCE

Education/Certification: High School diploma or equivalent; valid driver’s license, automobile liability insurance and the ability to be covered by our insurer; maintain an O7 card, where applicable

Required Knowledge: Demonstrated working knowledge of typical office building systems (e.g., mechanical, fire and life safety, electrical, HVAC, security systems, plumbing, etc.)

Experience Required: 5-7 years’ experience in commercial building maintenance or related field; 5+ years’ experience operating relevant computer hardware/software (e.g., HVAC, security, MS Office, Work order system, smart phones, etc.)

ADDITIONAL REQUIREMENTS

• Ability to obtain an employee fidelity bond
• Possess excellent communication and organizational skills.
• Able to build relationships with clients, vendors, and internal partners
• Ability to provide excellent customer service and mediate difficult client situations
• Ability to speak, write and understand English
• Professional communication etiquette with good oral and written communication skills
• Demonstrated ability to function as part of a team
• Ability to anticipate problems and solve proactively
• Demonstrated ability to prioritize, multi-task, identify, and utilize resources needed to execute

tasks within a deadline-driven environment

• Demonstrated critical thinking, initiative, and trouble shooting skills
• Demonstrated ability to use relevant technology including email, work order system, and smart

phone

• Willingness and demonstration of professional development and continual learning
• Demonstrated ability to complete tasks thoroughly and on time
• Available to work overtime and be on call as needed
• Professional, clean, and neat appearance
• Ability to provide small hand tools as needed
• Must have dependable vehicle capable of transporting needed tools/equipment (e.g., ladder,

power washer, hand tools, power tools, etc.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.
• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.
• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.
• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.
• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.
• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.
• Screen paperwork for options, substitutions, and effectiveness of parts and materials.
• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.
• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.
• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.
• Coordinate and complete travelers, investigating and clearing check orders as necessary.
• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.
• Ensure that certifications for tools, test equipment, and personnel are current and compliant.
• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.
• Perform first article inspections and FAA conformities, coordinating results as required.
• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).
• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.
• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.
• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.
• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.
• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector
• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators
• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
• Experience working with Microsoft Office (Excel, Word, PowerPoint)
• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.

As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems. This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Operate boilers, and may operate engines and boiler associated auxiliary equipment.
• Read gauges, meters, and charts to track boiler operations.
• Monitor boiler water, chemical, and fuel levels.
• Activate valves to change the amount of water, air, and fuel in boilers.
• Fire coal furnaces or feed boilers, using gas feeds or oil pumps.
• Inspect and maintain equipment to ensure that it is operating efficiently.
• Check safety devices and perform environmental checks routinely.
• Record data and keep logs of operation, maintenance, and safety activity.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• City of Seattle Steam Engineer's License Grade 2.
• 3+ Year Experience of boiler operation and maintenance experience.
• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.

Shift Work Statement:

• This position is for 4th shift

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $60.92 per hour – $60.92 per hour

Applications for this position will be accepted until Apr. 03, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is looking forGuidance Navigation and Control Engineers (Associate, Experienced or Senior) to support the Flight Controls team in Everett and Renton Washington.

Position Overview:

We are seeking accomplished, self-motivated engineers to design, analyze, test, and certify flight control systems and components for large commercial aircraft. In addition to supporting production and fleet operations, you will be part of a team driving the development of new derivative airplanes and preparing for the next generation of more capable, efficient, and safer airliners.

This requisition includes multiple positions across various flight control disciplines, offering opportunities to contribute to a wide range of important and challenging projects. Our teams are currently hiring for a broad range of experience levels including Associate, Experienced and Senior Guidance Navigation and Control Engineers.

We foster a collaborative environment where every team member prioritizes safety and recognizes the profound significance of their contributions to the aviation industry. Our strong emphasis on teamwork and a robust safety culture is not just a value; it is essential to our mission. By cultivating a culture that values collaboration and safety, we ensure that our commitment to excellence resonates throughout our organization, ultimately enhancing the trust and confidence placed in us by those who fly. If you are passionate about making a difference and thrive in a dynamic environment where your contributions are recognized, we invite you to apply today and join our team!

Position Responsibilities:

• Resolve airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost efficient validation methods.

• Develop and evaluate system and subsystem architecture alternatives to meet project objectives and requirements.

• Conduct trade studies to analyze and compare alternatives, rapidly converging on preferred configurations through system simulations and development test programs.

• Lead and participate in system, component, and detailed design efforts, ensuring thorough documentation and adherence to schedule and cost constraints to produce error-free, manufacturable specifications and drawings.

• Lead and support system- and component-level validation activities, including test plan development, consultation on iron bird and test rig setups, test monitoring, analysis, report authoring, supplier test report review and approval, failure analysis, and mitigation strategies.

• Drive certification efforts by creating required artifacts such as system safety analyses, failure modes and effects analyses (FMEA), and fault tree analyses (FTA); ensure traceability to regulatory requirements and resolve any regulatory conflicts.

• Support ongoing production by promptly addressing build issues at Boeing and supplier facilities, identifying and implementing design improvements to enhance build accuracy, production rate, and line safety, and resolving rejections, functional test failures, and flight squawks.

• Provide subject matter expertise to support global fleet operations, responding to airline and regulator inquiries, leading resolution of Service Related Problems (SRPs), and analyzing flight incidents to inform Safety Review Board (SRB) recommendations for the Continued Operational Safety Program (COSP).

• Collaborate effectively across functions and organizations within and outside Boeing, including manufacturing, avionics, crew operations, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies.

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett or Renton, WA.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.

• 1+ years of technical experience in an aerospace or similar regulated industry environment.

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of related work experience or an equivalent combination of education and experience.

• 5+ years of related work experience or an equivalent combination of education and experience.

• Knowledge/Experience with ARP 4754 and ARP 4761.

• Experience with flight controls system and component architecture.

• Experience in requirements development, design, analysis, and verification & validation of flight control systems.

• Experience using requirement management tools such as IBM Rational DOORS.

• Experience with manufacturing regulated and certified, safety critical components and software.

• Experience with Systems Safety Analysis, failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis.

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

• Associate (Level 2): $100,000 - $136,000

• Experienced (Level 3): $124,000 - $168,000

• Senior (Level 4): $153,000 - $207,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington.

This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.

The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.

Primary responsibilities:

• Provides technical guidance and training relative to complex safety and airworthiness matters
• Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
• Review certification plans, write letters to regulators, and understand compliance process
• Leading cross-functional teams resulting in resolution of technical issues.
• Coordinate technical messaging and partnering with the FAA on regulatory issues
• Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
• Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
• Develop strategic action plans for changes to certification processes and execute those plans through completion
• Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
• 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
• 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
• Experience with project management and self-managing projects.
• Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
• Ability to accomplish goals on a self-directed basis
• Experience leading cross-functional teams 

Preferred Qualifications (Desired Skills and Experience):

• Experience in presenting data to customers, suppliers, and program and site leaders.
• Knowledge of software development and Digital Services product portfolio is preferred.
• Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
• Understanding of Safety Risk Management/Bowtie methodology.
• Experience working across the certification value stream
• Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
• Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
• Experience identifying web application impact due to changes in certification requirements
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Experience recognizing and balance conflicting priorities

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Experienced (Level 3): $114,750 - $155,250
• Senior (Level 4) $141,100 - $190,900

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is seeking Senior Airborne Electronic Hardware (AEH) Engineer (Level 5)to join our team in Everett, Washington.

Position Overview:

The selected individuals will work within Boeing organizations and interface with suppliers to oversee development of Application Specific Integrated Circuits, Field Programmable Gate Arrays and Programmable Logic Device changes, ensure application of best industry and Boeing requirements and assure compliance with regulatory requirements.  Engineers applying for this position must understand RTCA/DO-254 and the relationship between complex electronics.  Highly desired are engineers with recent experience showing or finding compliance for airborne electronic hardware.

Position Responsibilities:

• Oversee and guide teams with airborne electronic hardware devices in development of airplane systems.

• Provide either showing of compliance or assisting in finding of compliance roles in accordance with FAA regulations associated with Airborne Electronic Hardware development.

• Provide direction to suppliers to improve their performance to contractual requirements (quality, delivery, cost, technical, safety, communication, etc.).

• Support audits and design reviews.

• Evaluate risks and opportunities; assist suppliers in implementing risk mitigation plans.

• Work with internal and external resources, utilizing tools, processes and methods to enhance supplier performance to meet customer and program requirements.

• Establish and maintain relationships with suppliers in support of airplane systems objectives.

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA.

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 7+ years of experience in developing complex electronic and electrical systems such as electronic device development, verification or compliance finding activities.

• 5+ years of experience in engineering, associated with certified airborne electronic hardware.

Preferred Qualification (Desired Skills / Experience):

• Ability to travel up to 15% of the time

• Bachelor's and 10+ years of experience or Master's and 7+ years of experience

• FAA Designated Engineering Representative, Authorized Representative or Engineering Unit Member in a company’s delegated compliance organization

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

$198,000 – $239,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Safety, Security, & Airworthiness (SSA) organization is seeking a Senior Systems Engineer – Compliance/Certification to join their Regulatory Administration System Oversight Team in Everett, WA.

The individual will have the opportunity to contribute to critical monitoring initiative and collaborate with industry – leading professional and regulatory agencies

Primary responsibilities:

• Leads the identification, analysis, and assessment of regulatory and contractual compliance of aerospace systems, products and services.
• Collaborate with internal and external stakeholders to define airworthiness and regulatory compliance requirements
• Reviews complex regulatory and customer requirements and develop monitoring strategies. (i.e. Certification)
• Leads analysis of regulatory and certification technical data for completeness and alignment to applicable regulatory and contractual requirements.
• Develop the planning and implementation of monitoring strategies.
• Research, investigates and monitors compliance processes for achieving regulatory compliance and recommends and leads process improvements, risk and opportunities
• Engages with regulators on complex programs or initiatives to shape certification strategies, approaches, activities, and artifacts.
• Develops and reviews, complex compliance reports and documents in accordance with applicable requirements and regulations.
• Leads establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Everett, WA.

Basic Qualifications (Required Skills and Experience):

• 9+ years of related work experience or an equivalent combination of education and experience
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 8+ years of experience working across the certification value stream.
• Experience working in International Type Validation and/or Operational Certification
• 4+ years of experience with certification processes to comply with 14 CFR 21.93, 21.95 and 21.97
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Strong technical writing abilities
• Experience extracting and compiling data from multiple sources
• Experience with analytics tools including Tableau, SQL, R, and Python

Preferred Qualifications (Desired Skills and Experience):

• 8+ years of experience identifying key stakeholder project specific requirements and scope, then building and managing project plans
• 8+ years of experience in business intelligence/data analytics tools (Microsoft Power BI, Dashboards, SQL, Tableau, etc.)
• Experience with systems engineering and integration of complex systems
• Experience with Risk Management
• Experience with audit activities
• Experience with Functional Decomposition
• Firsthand experience with airplane requirements

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $129,700 - $174,80

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

At the center of the efforts for BCA’s focus on stabilizing and improving the production system, our Production Engineering organization is growing! We are looking to fill multiple Production Engineering Manager positions with qualified and motivated candidates passionate about leading Boeing into the future.

Candidates considered for the role will lead integrated groups of engineers and technical staff operating within the BCA Production System. The leader will have the opportunity to work across multiple programs and areas. Adaptability and the ability to learn quickly are essential. We are looking for leaders who bring unique perspectives, curiosity and creativity when approaching challenges, and an insatiable desire for improvement.

Technical leadership and aptitude are essential for success in these roles along with people leadership skills to develop and inspire a team to reach a shared goal and vision. Strong candidates will have demonstrated success in developing and maintaining relationships with customers, stakeholders, and peers, as well as strong problem-solving skills, willingness to take initiative, and the ability to work across multiple functions to lead the development and implementation of production system solutions.
 

Primary Responsibilities:

• Lead teams responsible for the development, sustainment, and continuous improvement of the production system. Elements include but are not limited to: process engineering, manufacturing support, build plan development and oversight, technical management of suppliers, and introducing new technology.

• Lead special projects supporting key company priorities. Projects may include but are not limited to: stabilize and improve efficiency of the production system, enable rate increases on our production lines, and manage incorporation of product and process changes into the production system.

• Oversee technical management of suppliers in the design, sourcing, and implementation of new or improve build processes throughout the production system value stream.

• Develop and maintain partnerships with customers, stakeholders, peers, business partners and direct reports. Leverage network to seek broad input on key projects and initiatives.

• Manage, develop, and motivate employees to achieve their best both individually and as a team

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 3+ years of experience in a professional engineering role
   

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience working in a production environment

• 3 + years of experience with production systems design

• Experience leading or managing teams

• Experience working with cross-functional teams

• Experience with build plan development and deployment

• Experience with electrical or systems commodity

• ABET accredited Engineering degree

Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $151,300 – $204,700

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This is not an Export Control position.

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Commercial Airplanes (BCA), Configuration Management/Data Quality & Distribution organization has an exciting opportunity for a Mid-Level (Level 3) or Senior (Level 4) Mid-Level or Senior Safety & Airworthiness Support to join our team in Everett, WA.

Primary responsibilities:

• Analyzes data gathered from identified sources, identifies discrepancies and works with responsible organizations to resolve.
• Manages the change process. Integrates and coordinates design and configuration data required for certifications and/or flight clearance notices.
• Collects, organizes, synthesizes and analyzes data to support and guide business decisions. Summarizes findings.
• Performs configuration verification audits.
• Supports generation of product configuration data required for certifications and flight clearance notices.
• Supports the development of certification plans and deliverables for approval by regulatory representatives
• Collaborates with cert specialist across multiple functions to support cert activity.
•  Supports the daily development of data packages, metrics, and deliverables in support of certify and delivering commercial aircraft.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.

Basic Qualifications (Required Skills and Experience):

• Associate’s degree or higher
• Level 3: 3+ years of related work experience or an equivalent combination of education and experience
• Level 4: 6+ years of related work experience or an equivalent combination of education and experience
• Strong cross‑functional integration experience (working with engineering, manufacturing, supply chain, quality, or customer support).
• Excellent communication and stakeholder engagement skills, including experience engaging with senior/executive leadership and conveying information clearly.
• Experience leading cross-disciplinary teams in large organizations.
• Proven ability to support projects and drive plans to closure.

Preferred Qualifications (Desired Skills and Experience):

• Previous experience with regulatory compliance in aerospace or related industries.
• Familiarity with 14 CFR Part 25 requirements and experience interacting with regulators.
• Proven ability to lead projects and drive plans to closure.
• Desired tool familiarity: DCCS, ETAC, etc.
• Knowledge of baseline major/minor model and options documentation (e.g., configuration specification, customer detailed specifications, standard selections document).
• Knowledge of drawing/data systems (e.g., ""used on"" drawings, part relationships, product data management) and configuration management principles and processes (e.g., part number control, revision level, naming conventions, product identification numbering systems).
• Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics). Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business).

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Mid-Level (Level 3): $92,650 - $125,350
• Senior (Level 4): $114,750 - $155,250

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.