Engineering Jobs in Delafield Wisconsin
32 positions found — Page 3
M
Validation Engineer
Salary not disclosed
Job Summary Responsible for the validation of facility utilities, and equipment processes for cGMP products such as pharmaceuticals, medical devices, and cosmetic products to adhere to 21 CFR 211/210, 21 CFR 820, and other applicable regulatory requirements.
Assist in authoring and executing protocols to demonstrate that manufacturing processes are executed with consistent quality and results within a controlled environment.
Responsible for managing and or performing revalidation, engineering studies to evaluate new products or components, change control assessments, and coordination of computer and test method validations of applicable products.
Job Description Validate new and revalidate as appropriate existing equipment used in OTC/Cosmetic and medical device manufacturing.
Perform engineering studies to determine if projects are feasible.
Assist with measurement system analysis including Gage R&R.
Support product/design transfer activities including validations and creation of updates to documentation needed to manufacture OTC cosmetic and medical devices.
Support Change Assessment activities including assessment and qualification of changes to existing product components and implementation of products into manufacturing lines.
Support root cause investigations for non-conformances related to manufacturing validations.
Develop, prepare and install equipment and revise test validation procedures/protocols to ensure that a product is manufactured in accordance with appropriate regulatory agency validation requirement and current industry practices.
Responsible for IQ/OQ and PQ phases and implementation of validated SOPs.
Coordinate projects directly with vendors and service providers to ensure that all validation and installation requirements are being satisfied during the execution of protocols.
Develop timelines for all projects and ensure that deadlines and goals are being met.
Frequently update management and team on progress.
Proactively work with members of the division or project team to identify issues that might delay the project; make recommendations to improve time lines for project completion.
Compile and analyze validation data, prepare reports, and make recommendations for changes and/or improvements.
Maintain all of the documentation pertaining to qualification and validation of assigned projects and equipment/systems.
REQUIRED EXPERIENCE Education Bachelor of Science Degree in Biology, Chemistry, or Engineering.
Work Experience At least 2 years of validation experience in a cGMP Device or Drug environment.
Experience with validations of controlled environments or equipment validations in a regulated environment.
Experience with validation documentation and related change control.
Strong ability to manage multiple priorities, self-starter attitude, good oral and writing skills and the ability to work independently and as a team in an efficient manner.
PREFERRED QUALIFICATIONS Masters of Science in Chemistry, Biology, Biotechnology, Chemical Manufacturing, Biomedical Engineering, or Engineering.
Six Sigma certification.
3 years of validation experience in a cGMP Device or Drug environment.
Process validation experience in a pharmaceutical or Medical Device manufacturing environment.
Experience with validation of various product types such as liquid products, solid dosage products, and multi-component products.
Experience in FDA regulated environment.
Experience with ISO 13485 and ISO 11607 standards.
Experience with Measurement System Analysis.
Experience with Minitab statistical analysis software.
Experience with root cause analysis.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $73,000.00
- $110,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Assist in authoring and executing protocols to demonstrate that manufacturing processes are executed with consistent quality and results within a controlled environment.
Responsible for managing and or performing revalidation, engineering studies to evaluate new products or components, change control assessments, and coordination of computer and test method validations of applicable products.
Job Description Validate new and revalidate as appropriate existing equipment used in OTC/Cosmetic and medical device manufacturing.
Perform engineering studies to determine if projects are feasible.
Assist with measurement system analysis including Gage R&R.
Support product/design transfer activities including validations and creation of updates to documentation needed to manufacture OTC cosmetic and medical devices.
Support Change Assessment activities including assessment and qualification of changes to existing product components and implementation of products into manufacturing lines.
Support root cause investigations for non-conformances related to manufacturing validations.
Develop, prepare and install equipment and revise test validation procedures/protocols to ensure that a product is manufactured in accordance with appropriate regulatory agency validation requirement and current industry practices.
Responsible for IQ/OQ and PQ phases and implementation of validated SOPs.
Coordinate projects directly with vendors and service providers to ensure that all validation and installation requirements are being satisfied during the execution of protocols.
Develop timelines for all projects and ensure that deadlines and goals are being met.
Frequently update management and team on progress.
Proactively work with members of the division or project team to identify issues that might delay the project; make recommendations to improve time lines for project completion.
Compile and analyze validation data, prepare reports, and make recommendations for changes and/or improvements.
Maintain all of the documentation pertaining to qualification and validation of assigned projects and equipment/systems.
REQUIRED EXPERIENCE Education Bachelor of Science Degree in Biology, Chemistry, or Engineering.
Work Experience At least 2 years of validation experience in a cGMP Device or Drug environment.
Experience with validations of controlled environments or equipment validations in a regulated environment.
Experience with validation documentation and related change control.
Strong ability to manage multiple priorities, self-starter attitude, good oral and writing skills and the ability to work independently and as a team in an efficient manner.
PREFERRED QUALIFICATIONS Masters of Science in Chemistry, Biology, Biotechnology, Chemical Manufacturing, Biomedical Engineering, or Engineering.
Six Sigma certification.
3 years of validation experience in a cGMP Device or Drug environment.
Process validation experience in a pharmaceutical or Medical Device manufacturing environment.
Experience with validation of various product types such as liquid products, solid dosage products, and multi-component products.
Experience in FDA regulated environment.
Experience with ISO 13485 and ISO 11607 standards.
Experience with Measurement System Analysis.
Experience with Minitab statistical analysis software.
Experience with root cause analysis.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $73,000.00
- $110,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
J
Controls and Automation Designer
🏢 Jobot
Salary not disclosed
Design innovative control systems that power the next generation of automated manufacturing.
Join a tight-knit engineering team where your ideas go from concept to production.
This Jobot Job is hosted by: Ryan Weingardt Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $95,000
- $125,000 per year A bit about us: Our client is a well-established automation solutions partner serving manufacturers across Wisconsin and Northern Illinois.
They specialize in motion control, machine vision, robotics, and industrial automation.
Known for their engineering depth and customer-first approach, they help companies reduce risk, improve quality, and accelerate innovation.
You’ll join an organization that combines the agility of a design-build firm with the backing of a national technical group, giving you access to best-in-class tools, training, and support.
Why join us? Be part of a respected automation integrator with 25+ years of success in the Midwest Collaborate daily with degreed engineers who think like builders, not bureaucrats Engage in challenging, hands-on design work – every project is unique Excellent stability, professional growth, and technical mentorship Competitive compensation, strong benefits, and a collaborative team culture Job Details As a Controls Designer, you’ll develop and document prototype control panels and support the transition of designs into production.
You’ll partner closely with engineering, manufacturing, and customers to define application solutions, select components, and ensure successful first-time builds.
What You’ll Do: Design, document, and refine control panel layouts, schematics, and wiring diagrams Collaborate with engineering teams and customers to define application requirements Identify and implement design improvements to optimize product performance Maintain design documentation, revisions, and QC instructions for production builds Ensure safety compliance and adherence to internal and UL design standards Support build and test processes for initial prototypes and production units What You’ll Bring: 2-year Technical Degree in Electrical or Mechanical Design (Bachelor’s in Engineering preferred) Hands-on knowledge of machine control systems and AutoCAD Electrical Familiarity with UL standards, wire sizing, labeling, and documentation Strong attention to detail, design accuracy, and process discipline Ability to turn conceptual requirements into functional, manufacturable designs Experience in automation, control panel build, or machine integration environments preferred Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Join a tight-knit engineering team where your ideas go from concept to production.
This Jobot Job is hosted by: Ryan Weingardt Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $95,000
- $125,000 per year A bit about us: Our client is a well-established automation solutions partner serving manufacturers across Wisconsin and Northern Illinois.
They specialize in motion control, machine vision, robotics, and industrial automation.
Known for their engineering depth and customer-first approach, they help companies reduce risk, improve quality, and accelerate innovation.
You’ll join an organization that combines the agility of a design-build firm with the backing of a national technical group, giving you access to best-in-class tools, training, and support.
Why join us? Be part of a respected automation integrator with 25+ years of success in the Midwest Collaborate daily with degreed engineers who think like builders, not bureaucrats Engage in challenging, hands-on design work – every project is unique Excellent stability, professional growth, and technical mentorship Competitive compensation, strong benefits, and a collaborative team culture Job Details As a Controls Designer, you’ll develop and document prototype control panels and support the transition of designs into production.
You’ll partner closely with engineering, manufacturing, and customers to define application solutions, select components, and ensure successful first-time builds.
What You’ll Do: Design, document, and refine control panel layouts, schematics, and wiring diagrams Collaborate with engineering teams and customers to define application requirements Identify and implement design improvements to optimize product performance Maintain design documentation, revisions, and QC instructions for production builds Ensure safety compliance and adherence to internal and UL design standards Support build and test processes for initial prototypes and production units What You’ll Bring: 2-year Technical Degree in Electrical or Mechanical Design (Bachelor’s in Engineering preferred) Hands-on knowledge of machine control systems and AutoCAD Electrical Familiarity with UL standards, wire sizing, labeling, and documentation Strong attention to detail, design accuracy, and process discipline Ability to turn conceptual requirements into functional, manufacturable designs Experience in automation, control panel build, or machine integration environments preferred Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Senior Manufacturing Quality Manager - Hartland, WI
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Job Description JOB SUMMARY Responsible for leading the quality and compliance for applicable products and processes for assigned department(s).
Set organizational priorities, oversee resource utilization and develop operational plans and policies.
MAJOR RESPONSIBILITIES Monitor and maintain compliance with applicable (ex.
QSR, GMP, ISO) pertaining to the applicable life cycle and regions of distribution for the product.
Act as liaison with the Leadership of Divisions, Suppliers, Manufacturing, and/or Operations to ensure quality products, on time delivery, and customer satisfaction.
Devise and implement effective communication strategies with Divisions, Suppliers, Manufacturing, and/or Operations Executives and other internal and external Stakeholders.
Leads the process and team during investigations and identifying resolutions for issues relating to product or production quality by interfacing with Divisions, Suppliers, Manufacturing, and/or Operations.
Devise and implement continuous improvement initiatives, develop and share best practices, and particpate in policy setting activities.
Oversee the execution to the resolution of all quality issues.
Provides Leadership support during internal/external regulatory audits.
Management responsibilities include: Typically, manages through multiple Managers and/or Supervisors Oversee major projects/programs/outcomes Budget responsibility Interpret and execute policies for departments/projects and develops Recommend and implement new policies or modifications to existing policies Provide general guidelines and parameters for staff functioning; Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.
MINIMUM JOB REQUIREMENTS Education Typically requires a Bachelor’s degree in Engineering, Science, or Technical Field.
Work Experience At least 5 years of experience related to the design/operation of medical device or drug combination product platforms, design controls, risk management, including working in compliance with QSR/GMP/ISO requirements or other regulated industries (21CFR 820, ISO 13485, ISO 14971, MDSAP, and MDR).
At least 2 years of management experience.
Knowledge / Skills / Abilities Depth of technical knowledge of relevant standards and regulations (21CFR 820, ISO 13485, ISO 14971, MDSAP, and MDR etc.) Proficiency in analyzing and reporting data and performing statistical analysis in order to identify issues, trends, or exceptions to drive improvement of results and find solutions.
Demonstrated ability to control and coordinate concurrent projects, competing priorities and critical deadlines.
Advanced skill level in Microsoft Excel (for example: pivot tables and reporting, conditional formatting, tables, formulas, charting, etc.).
Position requires travel up to 30% of the time for business purposes (within state, out of state and/or internationally).
PREFERRED JOB REQUIREMENTS Work Experience At least 4 years of managerial experience preferred.
At least 6 years of related experience in Medical Device, Pharmaceutical, Food, Cosmetic, or Personal Products industries preferred.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $134,000.00
- $201,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Set organizational priorities, oversee resource utilization and develop operational plans and policies.
MAJOR RESPONSIBILITIES Monitor and maintain compliance with applicable (ex.
QSR, GMP, ISO) pertaining to the applicable life cycle and regions of distribution for the product.
Act as liaison with the Leadership of Divisions, Suppliers, Manufacturing, and/or Operations to ensure quality products, on time delivery, and customer satisfaction.
Devise and implement effective communication strategies with Divisions, Suppliers, Manufacturing, and/or Operations Executives and other internal and external Stakeholders.
Leads the process and team during investigations and identifying resolutions for issues relating to product or production quality by interfacing with Divisions, Suppliers, Manufacturing, and/or Operations.
Devise and implement continuous improvement initiatives, develop and share best practices, and particpate in policy setting activities.
Oversee the execution to the resolution of all quality issues.
Provides Leadership support during internal/external regulatory audits.
Management responsibilities include: Typically, manages through multiple Managers and/or Supervisors Oversee major projects/programs/outcomes Budget responsibility Interpret and execute policies for departments/projects and develops Recommend and implement new policies or modifications to existing policies Provide general guidelines and parameters for staff functioning; Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.
MINIMUM JOB REQUIREMENTS Education Typically requires a Bachelor’s degree in Engineering, Science, or Technical Field.
Work Experience At least 5 years of experience related to the design/operation of medical device or drug combination product platforms, design controls, risk management, including working in compliance with QSR/GMP/ISO requirements or other regulated industries (21CFR 820, ISO 13485, ISO 14971, MDSAP, and MDR).
At least 2 years of management experience.
Knowledge / Skills / Abilities Depth of technical knowledge of relevant standards and regulations (21CFR 820, ISO 13485, ISO 14971, MDSAP, and MDR etc.) Proficiency in analyzing and reporting data and performing statistical analysis in order to identify issues, trends, or exceptions to drive improvement of results and find solutions.
Demonstrated ability to control and coordinate concurrent projects, competing priorities and critical deadlines.
Advanced skill level in Microsoft Excel (for example: pivot tables and reporting, conditional formatting, tables, formulas, charting, etc.).
Position requires travel up to 30% of the time for business purposes (within state, out of state and/or internationally).
PREFERRED JOB REQUIREMENTS Work Experience At least 4 years of managerial experience preferred.
At least 6 years of related experience in Medical Device, Pharmaceutical, Food, Cosmetic, or Personal Products industries preferred.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $134,000.00
- $201,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
C
Supply Chain Intern - Summer 2026
Salary not disclosed
Description
We are looking for a Supply Chain/Sourcing Intern who will gain experience working with the Supply Chain team on multiple projects in a corporate environment. This is a full-time (40 hours/week) paid internship for the Summer 2026 semester and is based at CentroMotion Corporate in Waukesha, WI. This individual will provide sourcing support to a sourcing manager while learning and growing experience in strategic sourcing.
Responsibilities:
- Support Sourcing Managers with project execution, tactical analytics generation, and special improvement projects.
- New supplier onboarding/outreach
- Contract (NDA) renewal execution and negotiation upon expiration
- Co-lead internal/external design reviews
- Assist in MRP data upkeep/generation
- ECR/Deviation submissions as needed & change management support
- New supplier assessment and audit support
- Assist with supplier performance metrics and scorecards as needed
Accomplishments of Internship:
- Self-led identification and realization of Value Creation (PCIS) projects totaling >$50k
- Development of internal CentroMotion manufacturing capability list by site globally
- Updated risk assessment of current procured materials
- Commodity Coding Support for Analytics tool
- Other support tasks ask required
Requirements
- Student of Junior or Senior standing, working towards a bachelor’s degree in engineering or related field.
- Ability to thrive and be part of a fast-paced environment.
- Experience with Microsoft Office Suite (Excel, Outlook, Word, Power Point) required.
- Ability to effectively interact with employees and leaders at all levels of the organization.
- Excellent verbal and written communication skills.
- Strong work ethics and time management experience.
- Ability to handle confidential materials with discretion and accuracy.
- Willing to be located onsite at CentroMotion Corporate in Pewaukee, WI.
internship
J
Welding Engineer
🏢 Jobot
Salary not disclosed
Welding Engineer
- Custom Automation
- Great Milwaukee
- Certified Integrator This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: Our client is a growing turnkey automation company who produces turnkey automation equipment for a variety of industries.
They've been in business for several decades and highly value company culture, employee satisfaction and their customers.
Why join us? We provide turnkey automation systems for a variety of industries including: Medical Device, Consumer and Industrial, E-Commerce, Aerospace, Automotive, etc.
Because of this we always have plenty of work and projects coming in.
We are one of the leaders in new technology offering our employees to work on custom projects involving robotics, 3D printers, palletizers and many others.
In addition, we work with our people and understand work is not everything.
We will ensure you are more than just a number and will help you accomplish your career goals and aspirations, We have great reviews from customers and employees and are always looking for talented individuals.
Job Details The Application Engineer is responsible for working with the customer, sales and engineering to generate quotes, estimates and proposals for automation equipment.
MUST HAVES: Strong experience with quoting, estimates and proposals (preferred) Excellent background specifically with Solidworks Experience with welding robots Availability to work on-site with some travel Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Custom Automation
- Great Milwaukee
- Certified Integrator This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: Our client is a growing turnkey automation company who produces turnkey automation equipment for a variety of industries.
They've been in business for several decades and highly value company culture, employee satisfaction and their customers.
Why join us? We provide turnkey automation systems for a variety of industries including: Medical Device, Consumer and Industrial, E-Commerce, Aerospace, Automotive, etc.
Because of this we always have plenty of work and projects coming in.
We are one of the leaders in new technology offering our employees to work on custom projects involving robotics, 3D printers, palletizers and many others.
In addition, we work with our people and understand work is not everything.
We will ensure you are more than just a number and will help you accomplish your career goals and aspirations, We have great reviews from customers and employees and are always looking for talented individuals.
Job Details The Application Engineer is responsible for working with the customer, sales and engineering to generate quotes, estimates and proposals for automation equipment.
MUST HAVES: Strong experience with quoting, estimates and proposals (preferred) Excellent background specifically with Solidworks Experience with welding robots Availability to work on-site with some travel Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Maintenance Technician II - 12HR PM Shift - $6,500 Sign On Bonus!
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Who We Are: Medline is the largest provider of medical-surgical products and supply chain solutions in the U.S., every hour of every day, healthcare professionals across the globe rely on Medline to help them do their job.
We make healthcare run better.
What We Bring: Medline is a team that is committed to customer care and making products that have a positive impact for patients.
Medline is committed to simplifying processes, empowering our teams to achieve results and recognizing those achievements.
The opportunities are here, come grow with us! What You Bring: We are looking for individuals who have a passion for making a quality healthcare product in a collaborative and respectful environment.
We look for those who are enthusiastic about trying new things and learning every day.
If you have a relentless focus on serving the customer every day and are results driven, Medline is the place for you.
Would you enjoy working in a clean, organized, safety-focused facility? Enjoy a set schedule, work-life balance, and excellent benefits.
Apply today! Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description $6,500.00 Sign-On Bonus! Shift/hours 12 HR PM Shift 6:00PM-6:00AM Rotating Schedule
- 2-2-3 format (Train on 1st shift 5/8 hour schedule) Check out what it's like to work at Medline in Hartland, WI by clicking HERE to see our video! Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
We make healthcare run better.
What We Bring: Medline is a team that is committed to customer care and making products that have a positive impact for patients.
Medline is committed to simplifying processes, empowering our teams to achieve results and recognizing those achievements.
The opportunities are here, come grow with us! What You Bring: We are looking for individuals who have a passion for making a quality healthcare product in a collaborative and respectful environment.
We look for those who are enthusiastic about trying new things and learning every day.
If you have a relentless focus on serving the customer every day and are results driven, Medline is the place for you.
Would you enjoy working in a clean, organized, safety-focused facility? Enjoy a set schedule, work-life balance, and excellent benefits.
Apply today! Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description $6,500.00 Sign-On Bonus! Shift/hours 12 HR PM Shift 6:00PM-6:00AM Rotating Schedule
- 2-2-3 format (Train on 1st shift 5/8 hour schedule) Check out what it's like to work at Medline in Hartland, WI by clicking HERE to see our video! Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
J
MIG Welder
🏢 Jobot
Salary not disclosed
MIG Welding Opportunity/ $25.00 – $32.00 per Hour / Great Benefits And Growth Opportunity This Jobot Job is hosted by: Shawn Trainor Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $25
- $32 per hour A bit about us: We are an industry-leading innovator of stamping equipment and are looking for a skilled welder to join our team.
Why join us? Competitive compensation We have openings on 1st shift Great benefits 401k Match Plenty of overtime available Well-ventilated facility Job Details Key Responsibilities Perform MIG welding on a variety of metals, primarily steel and aluminum, according to project specifications.
Set up welding equipment, adjust settings, and select appropriate wire, gas, and materials for each job.
Read and interpret engineering drawings, blueprints, and welding symbols to determine project requirements.
Prepare materials for welding, including cutting, grinding, and fitting components.
Inspect completed welds for quality, strength, and adherence to specifications.
Maintain welding equipment, tools, and work area to ensure optimal operation and safety.
Follow all safety protocols, including the use of PPE and proper handling of welding equipment.
Work closely with other welders, fabricators, and supervisors to meet production schedules and deadlines.
Assist in continuous improvement initiatives to enhance efficiency and quality within the department.
Qualifications High school diploma or equivalent (technical training or welding certification preferred).
1–3 years of experience in MIG welding within a manufacturing or fabrication environment.
Strong knowledge of welding processes, materials, and safety practices.
Ability to read and interpret blueprints and welding symbols.
Proficiency in using hand tools, grinders, and measuring instruments.
Ability to work independently and as part of a team.
Physical ability to lift up to 50 lbs., stand for extended periods, and work in varying temperatures Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $25
- $32 per hour A bit about us: We are an industry-leading innovator of stamping equipment and are looking for a skilled welder to join our team.
Why join us? Competitive compensation We have openings on 1st shift Great benefits 401k Match Plenty of overtime available Well-ventilated facility Job Details Key Responsibilities Perform MIG welding on a variety of metals, primarily steel and aluminum, according to project specifications.
Set up welding equipment, adjust settings, and select appropriate wire, gas, and materials for each job.
Read and interpret engineering drawings, blueprints, and welding symbols to determine project requirements.
Prepare materials for welding, including cutting, grinding, and fitting components.
Inspect completed welds for quality, strength, and adherence to specifications.
Maintain welding equipment, tools, and work area to ensure optimal operation and safety.
Follow all safety protocols, including the use of PPE and proper handling of welding equipment.
Work closely with other welders, fabricators, and supervisors to meet production schedules and deadlines.
Assist in continuous improvement initiatives to enhance efficiency and quality within the department.
Qualifications High school diploma or equivalent (technical training or welding certification preferred).
1–3 years of experience in MIG welding within a manufacturing or fabrication environment.
Strong knowledge of welding processes, materials, and safety practices.
Ability to read and interpret blueprints and welding symbols.
Proficiency in using hand tools, grinders, and measuring instruments.
Ability to work independently and as part of a team.
Physical ability to lift up to 50 lbs., stand for extended periods, and work in varying temperatures Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Maintenance Tech I 12HR PM - $6,500 Sign On Bonus!
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Who We Are: Medline is the largest provider of medical-surgical products and supply chain solutions in the U.S., every hour of every day, healthcare professionals across the globe rely on Medline to help them do their job.
We make healthcare run better.
What We Bring: Medline is a team that is committed to customer care and making products that have a positive impact for patients.
Medline is committed to simplifying processes, empowering our teams to achieve results and recognizing those achievements.
The opportunities are here, come grow with us! What You Bring: We are looking for individuals who have a passion for making a quality healthcare product in a collaborative and respectful environment.
We look for those who are enthusiastic about trying new things and learning every day.
If you have a relentless focus on serving the customer every day and are results driven, Medline is the place for you.
Would you enjoy working in a clean, organized, safety-focused facility? Enjoy a set schedule, work-life balance, and excellent benefits.
Apply today! Job Description $6,500.00 Sign-On Bonus! Shift/hours 12 HR PM Shift 6:00PM-6:00AM Rotating Schedule
- 2-2-3 format (Training 1st Shift 5/8 hour schedule) Check out what it's like to work at Medline in Hartland, WI by clicking HERE to see our video! Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must furnish own necessary hand tools.
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $26.25
- $38.00 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
We make healthcare run better.
What We Bring: Medline is a team that is committed to customer care and making products that have a positive impact for patients.
Medline is committed to simplifying processes, empowering our teams to achieve results and recognizing those achievements.
The opportunities are here, come grow with us! What You Bring: We are looking for individuals who have a passion for making a quality healthcare product in a collaborative and respectful environment.
We look for those who are enthusiastic about trying new things and learning every day.
If you have a relentless focus on serving the customer every day and are results driven, Medline is the place for you.
Would you enjoy working in a clean, organized, safety-focused facility? Enjoy a set schedule, work-life balance, and excellent benefits.
Apply today! Job Description $6,500.00 Sign-On Bonus! Shift/hours 12 HR PM Shift 6:00PM-6:00AM Rotating Schedule
- 2-2-3 format (Training 1st Shift 5/8 hour schedule) Check out what it's like to work at Medline in Hartland, WI by clicking HERE to see our video! Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must furnish own necessary hand tools.
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $26.25
- $38.00 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
J
Maintenance Technician
🏢 Jobot
Salary not disclosed
Multiple shifts available (flexible depending on site needs) This Jobot Job is hosted by: Ray Bahl Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $26
- $34 per hour A bit about us: This organization is an industrial manufacturer and engineering provider specializing in thermal processing and finishing systems for production environments.
It designs and builds custom equipment such as industrial ovens, washers, and integrated material-handling systems tailored to specific manufacturing processes.
The company focuses on improving efficiency, product quality, and environmental performance through innovative, energy-conscious technologies.
In addition to equipment manufacturing, it offers engineering support, system integration, installation assistance, and ongoing service to support long-term operational success.
Why join us? Health & Financial Benefits Medical, dental, and vision insurance 401(k) retirement savings plan, often with employer match Life insurance coverage Short-term and long-term disability insurance Health Savings Accounts (HSA) or Flexible Spending Accounts (FSA) Time Off Paid vacation Paid holidays Personal or sick leave Workplace Support & Perks Employee Assistance Programs (EAP) Safety-focused work environment Training and professional development opportunities Career advancement pathways within engineering, manufacturing, and operations Company events or team-building activities Job Details 3rd Shift Schedule: Ideal for candidates seeking off-shift stability Sunday
- Thursday 9pm
- 5am Shift flexibility offered Key Responsibilities and Duties Diagnose and troubleshoot mechanical, hydraulic, pneumatic, and system-level equipment issues Communicate repair scope, timelines, and cost estimates to operations Repair, rebuild, and maintain complex industrial machinery using blueprints and schematics Perform rigging, alignment, leveling, and installation of heavy equipment Maintain plant systems including hydraulic, air, gas, water, and ventilation Conduct preventive maintenance on assigned equipment Fabricate parts using metalworking and sheet-metal equipment Perform welding, mechanical installations, and equipment alignment Maintain certifications and comply with all safety standards Qualifications – Needed Education / Training: Trade or vocational school completion OR equivalent industrial maintenance experience Experience: Minimum 3–5+ years of industrial or mechanical maintenance experience Technical Background: Strong experience troubleshooting and repairing industrial equipment Ability to read blueprints, schematics, and mechanical drawings Hands-on fabrication, welding, and metalworking experience Experience with hydraulics, pneumatics, and mechanical systems Additional Requirements: Ability to work independently without supervision Strict adherence to safety standards Strong written and verbal communication skills PLC or automation exposure preferred, not required Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $26
- $34 per hour A bit about us: This organization is an industrial manufacturer and engineering provider specializing in thermal processing and finishing systems for production environments.
It designs and builds custom equipment such as industrial ovens, washers, and integrated material-handling systems tailored to specific manufacturing processes.
The company focuses on improving efficiency, product quality, and environmental performance through innovative, energy-conscious technologies.
In addition to equipment manufacturing, it offers engineering support, system integration, installation assistance, and ongoing service to support long-term operational success.
Why join us? Health & Financial Benefits Medical, dental, and vision insurance 401(k) retirement savings plan, often with employer match Life insurance coverage Short-term and long-term disability insurance Health Savings Accounts (HSA) or Flexible Spending Accounts (FSA) Time Off Paid vacation Paid holidays Personal or sick leave Workplace Support & Perks Employee Assistance Programs (EAP) Safety-focused work environment Training and professional development opportunities Career advancement pathways within engineering, manufacturing, and operations Company events or team-building activities Job Details 3rd Shift Schedule: Ideal for candidates seeking off-shift stability Sunday
- Thursday 9pm
- 5am Shift flexibility offered Key Responsibilities and Duties Diagnose and troubleshoot mechanical, hydraulic, pneumatic, and system-level equipment issues Communicate repair scope, timelines, and cost estimates to operations Repair, rebuild, and maintain complex industrial machinery using blueprints and schematics Perform rigging, alignment, leveling, and installation of heavy equipment Maintain plant systems including hydraulic, air, gas, water, and ventilation Conduct preventive maintenance on assigned equipment Fabricate parts using metalworking and sheet-metal equipment Perform welding, mechanical installations, and equipment alignment Maintain certifications and comply with all safety standards Qualifications – Needed Education / Training: Trade or vocational school completion OR equivalent industrial maintenance experience Experience: Minimum 3–5+ years of industrial or mechanical maintenance experience Technical Background: Strong experience troubleshooting and repairing industrial equipment Ability to read blueprints, schematics, and mechanical drawings Hands-on fabrication, welding, and metalworking experience Experience with hydraulics, pneumatics, and mechanical systems Additional Requirements: Ability to work independently without supervision Strict adherence to safety standards Strong written and verbal communication skills PLC or automation exposure preferred, not required Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Controls Engineer
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Provide engineering support to maintain the controls and information system and the Process Safety Management system.
Create and implement new processes.
Job Description Design, program, maintain and commission PLC-based control systems using Siemens TIA Portal and Rockwell Studio 5000.
Develop and configure HMI systems (e.g., WinCC, FactoryTalk View).
Integrate and troubleshoot industrial networks (Ethernet/IP, Profinet, Modbus).
Perform system diagnostics, root cause analysis, and implement corrective actions.
Maintain quality assurance on the control systems in manufacturing.
Collaborate with engineering and maintenance teams to ensure seamless integration of automation solutions.
Create and maintain documentation (schematics, wiring diagrams, control logic).
Ensure compliance with safety standards and industry regulations.
Provide technical support during installation, startup, and production phases.
Responsible for engineering projects planning, execution and completion within established time frame, meeting project objectives, and project cost targets.
Participate in continuous improvement projects to optimize system performance and reduce downtime.
REQUIRED EXPERIENCE Education Bachelor of Science in Engineering, Mechanical Engineering or Electrical Engineering or equivalent experience.
Work Experience At least 5 years of experience in industrial automation and controls engineering.
Proficiency in Siemens TIA Portal and Rockwell Studio 5000 programming.
Experience with HMI/SCADA development and industrial communication protocols.
Strong understanding of electrical schematics, instrumentation, and control theory.
Experience with VFDs, servo systems, and motion control.
Knowledge / Skills / Abilities Experience identifying operational issues and recommending and implementing strategies to resolve problems under time constraints.
Experience using time management skills such as prioritizing/organizing and tracking details and meeting deadlines of multiple projects with varying completion dates.
Position requires work on extended and /or "odd" or "on call" hours as business needs dictate.
PREFERRED QUALIFICATIONS Knowledge of safety PLCs and functional safety standards (IEC 61508, ISO 13849).
Experience with robotics integration and advanced motion control.
Experience with data acquisition, IIoT, and Industry 4.0 concepts.
Professional Engineering License.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $85,000.00
- $128,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Create and implement new processes.
Job Description Design, program, maintain and commission PLC-based control systems using Siemens TIA Portal and Rockwell Studio 5000.
Develop and configure HMI systems (e.g., WinCC, FactoryTalk View).
Integrate and troubleshoot industrial networks (Ethernet/IP, Profinet, Modbus).
Perform system diagnostics, root cause analysis, and implement corrective actions.
Maintain quality assurance on the control systems in manufacturing.
Collaborate with engineering and maintenance teams to ensure seamless integration of automation solutions.
Create and maintain documentation (schematics, wiring diagrams, control logic).
Ensure compliance with safety standards and industry regulations.
Provide technical support during installation, startup, and production phases.
Responsible for engineering projects planning, execution and completion within established time frame, meeting project objectives, and project cost targets.
Participate in continuous improvement projects to optimize system performance and reduce downtime.
REQUIRED EXPERIENCE Education Bachelor of Science in Engineering, Mechanical Engineering or Electrical Engineering or equivalent experience.
Work Experience At least 5 years of experience in industrial automation and controls engineering.
Proficiency in Siemens TIA Portal and Rockwell Studio 5000 programming.
Experience with HMI/SCADA development and industrial communication protocols.
Strong understanding of electrical schematics, instrumentation, and control theory.
Experience with VFDs, servo systems, and motion control.
Knowledge / Skills / Abilities Experience identifying operational issues and recommending and implementing strategies to resolve problems under time constraints.
Experience using time management skills such as prioritizing/organizing and tracking details and meeting deadlines of multiple projects with varying completion dates.
Position requires work on extended and /or "odd" or "on call" hours as business needs dictate.
PREFERRED QUALIFICATIONS Knowledge of safety PLCs and functional safety standards (IEC 61508, ISO 13849).
Experience with robotics integration and advanced motion control.
Experience with data acquisition, IIoT, and Industry 4.0 concepts.
Professional Engineering License.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $85,000.00
- $128,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
jobs by
✓ All jobs loaded