Engineering Jobs in De

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

• Diagnostics & Repair

  • Independently diagnose and repair:
    • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
    • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
    • Air and hydraulic brake systems, ABS, and suspension components.
    • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
    • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

   

  Preventive Maintenance & Compliance

  • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
  • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
  • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

   

  Road Calls & Operational Support

  • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
  • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

   

  Mentorship, Training & Documentation

  • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
  • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
  • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

JOB SUMMARY

JOB SUMMARY

Important: This position is based on-site in Zapopan, Jalisco

Jabil is seeking a Sr. software Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. The Software Test Development Engineer play a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

•   Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware components or devices such as motherboard, memory, CPU, storage (SSD, HDD, NVMe) and PCIE devices (NIC, GPU, Mezz cards, RAID cards)
• Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports
• Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
• Documentation : Maintain comprehensive manufacturing server (L10) and rack (L11) documentation of test procedures, specifications, and Infrastructure
• Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
• Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up-to-date.
• Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
• Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
• Expertise with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
• Expertise in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
• Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
• Experience with code versioning tools (Git preferred)
• Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations

EDUCATION & EXPERIENCE REQUIREMENTS:

• BS degree in Electrical/Computer Engineering, Computer Science o r related field. MS preferred.
• 8 years experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products.
• Excellent verbal and written communication skills.
• Experience working in a multi-site and multi-cultural environments.
• Domestic and/or International travel, up to 10%, may be required.

Important: This position is based on-site in Guadalajara, Jalisco, open to relocation.

Job Description:

Jabil is seeking a Product Engineer who will directly contribute to the transformative growth within our Cloud and Enterprise Infrastructure division by applying unique and innovative approaches to developing end customer product solutions. You will be responsible for managing the technical direction of Advanced Compute Platform NPI and manufacturing programs through the lens of the customer, factory, and business leadership. You will also be responsible for partnering and collaborating with customers, strategic suppliers, internal engineering, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.

LEADERSHIP RESPONSIBILITIES

• Responsible for product introductions and manufacturing performance for new and sustaining AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
• Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
• Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
• Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
• Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
• Provide thought leadership and direct engineering support for your assigned manufacturing site in the areas of product, test infrastructure, component and supplier expertise.
• Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.

• Guide the customer and Jabil operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
• Partner with site operations and test leadership to drive root cause investigations leading to clear actions and improvements in FPY, test throughput and repair yield.
• Primary technical interface for customer product introductions and manufacturing performance from a server and storage subject matter expertise perspective.
• Directly contribute to the knowledge base used for effective/accurate debug, train the appropriate test/debug leads and respond to feedback in a timely manner to support daily operational objectives.
• Directly contribute to the knowledge base used for effective/accurate debug, train the appropriate test/debug leads and respond to feedback in a timely manner to support daily operational objectives.

• Experience with server, storage, networking and GPGPU and PCIe-based accelerator architectures. 
• Systems management experience with server products including embedded remote management standards, interfaces and applications.
• Working knowledge of OS, driver, firmware and hardware architecture, device interactions.
• Ability to leverage SW/HW expertise to determine root cause that leads to optimized solutions.
• Expertise with Linux operating systems, related applications and script development.

• BS degree in Electrical/Computer Engineering, Computer Science or related field. MS preferred.
• 3+ years experience in a hardware product development environment with enterprise server, storage or networking products.
• Experience working in a multi-site and multi-cultural environments.
• Proven ability to work within a fast-paced and highly ambiguous business environment.
• Domestic and/or international travel, up to 10%, may be required.

JOB SUMMARY

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs services on specialized equipment in one or more of the following categories:  anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory analyzers, etc.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on deprartment guidelines)  to order parts and supplies required for  emergency service or repair of  radiological and general medical equipment. Recommends  test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provide on-call service coverage after normal business hours on a rotating basis.

Provides assistance and training to Bio-Medical Equipment Techs I and II as assigned by Clinical Engineering Manager.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET or CLET certification preferred.

Five or more years experience or equivalent performing corrective and planned  maintenance on medical devices and/or clinical equipment.

Specialized training by manufacturer or third party equipment repair in such areas as

      anesthesia machines, sterilizers, ultrasound, ventilators, laser, laboratory analyzers, etc.

Ability to demonstrate a high level of proficiency in specialty area.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge  and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates on  use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and the ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

          .

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs services on specialized equipment in one or more of the following categories:  anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory analyzers, etc.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on deprartment guidelines)  to order parts and supplies required for  emergency service or repair of  radiological and general medical equipment. Recommends  test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provide on-call service coverage after normal business hours on a rotating basis.

Provides assistance and training to Bio-Medical Equipment Techs I and II as assigned by Clinical Engineering Manager.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET or CLET certification preferred.

Five or more years experience or equivalent performing corrective and planned  maintenance on medical devices and/or clinical equipment.

Specialized training by manufacturer or third party equipment repair in such areas as

      anesthesia machines, sterilizers, ultrasound, ventilators, laser, laboratory analyzers, etc.

Ability to demonstrate a high level of proficiency in specialty area.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge  and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates on  use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and the ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

          .

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.