Engineering Jobs in Cromwell

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now

FUNCTION:

In an assigned area or cell, under general supervision perform complex polishing and finishing operations of exacting tolerance on production or overhaul and repair parts. Parts are typically at or near final stages of the manufacturing process, with tight tolerance limits, requiring intense period of concentration for extended periods of time.

TYPICAL DUTIES:

• 
  
• Work from drawings, sketches, computer-generated information and verbal instructions to plan the polishing, finishing or re-work operation to be performed.
  

• 
  
• Must be capable of following standard finishing applications in order to achieve dimensional integrity and required finish characteristics.
  

• 
  
• Must have comprehensive understanding of the material characteristics being worked on in order to determine the appropriate wheel, grit, compound or abrasive texture to use in order to achieve desired finish and dimension.
  

• 
  
• Perform precise chamfering operations on parts, without damaging other critical part dimensions
  

• 
  
• Work from quality review and corrective work documents to repair or rework parts.
  

• 
  
• Use precision measuring instruments in order to gage various critical dimension and tolerance limits, in accordance with established parameters or blue print requirements.
  

• 
  
• Performs temporary part marking and In process transfer marking operations using Vibro Engraving, Electro-chemical Etch, or Ink Stamp, methods with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• Refer difficulties to leader or supervisor as appropriate.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift.

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need fora Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite.Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. We are always seeking to hire talented, hard-working, and committed individuals for roles in Operations (CNC Machining, Tool Making, and Fabrication/Assembly), Engineering, Quality, and other Support Roles.

Reporting to the Newington Site General Manager, the Senior Manager, Operations is responsible for overseeing all operational value streams within the organization. This role includes leading a matrixed organization comprised of Engineering, Quality, Production Planning, Supply Chain, Production Support, and highly skilled Machinists in the manufacturing of aerospace components. The Senior Manager, Operations is tasked with driving operational excellence, meeting performance metrics, and fostering continuous improvement across all value streams. This role also acts as a liaison with other functions and external customers.

Location: Based out of Newington, CT

Reports to: General Manager

Responsibilities:

• Provide strategic direction for all operational value streams, including long- and short-range resource planning (labor, equipment) to ensure effective and profitable operations, adjusting to changing customer or business needs as required.
• Execute manufacturing schedules to meet on-time delivery of products while adhering to quality standards and minimizing costs.
• Oversee and manage the external supplier network to meet or exceed performance targets for delivery, quality, and cost.
• Build and maintain strong, cooperative relationships with customers, resolving issues promptly to mitigate impacts on schedules or deliverables.
• Champion Lean Manufacturing initiatives across all value streams to improve established metrics.
• Lead process improvement efforts to achieve highly capable processes and world-class yield rates.
• Communicate effectively across the organization, ensuring feedback, updates, and information flow seamlessly between all levels and functions.
• Lead supervisors and production employees, including recruitment, performance management, coaching, training, and compliance with company and legal requirements.
• Proactively identify and escalate issues to senior management that may impact business objectives.

Required Qualifications:

• Bachelor’s degree in engineering, business or a related discipline.
• 5+ years of experience in a production environment, with at least 5 years in Aerospace Manufacturing management or program management.
• 3+ years of experience leading and managing a team in a production environment.
• Demonstrated ability to think strategically, develop operational plans, and link financial outcomes with operational strategies.
• Knowledge of Lean Six Sigma principles and continuous improvement; experience leading operational transformation.
• Demonstrated “solution-minded” thinking skills, direct ownership of situations.

Preferred Qualifications:

• Proficient organizational, communication, and leadership skills to effectively engage with individuals at all levels and cross-functional groups.
• Extensive experience with Microsoft Office for data analysis and preparing presentations.
• Master’s degree in engineering, business, or an MBA. Six Sigma Black Belt/Green Belt or AME Silver certification, or equivalent Lean Manufacturing certification.

• 5+ yrs of Frontend Development experience, building & engineering user interfaces
• Expertise with React
• Experience leading frontend initiatives, making architectural decisions, bridging the gap between FE and existing BE systems, and mentoring team members
• Python, Django, and FastAPI
• Prior startup experience

• Kubernetes, Argo, and Google Cloud Platform
• Experience building full-stack applications from scratch
• Infrastructure as code and DevOps experience

• 5+ yrs of Frontend Development experience, building & engineering user interfaces
• Expertise with React
• Experience leading frontend initiatives, making architectural decisions, bridging the gap between FE and existing BE systems, and mentoring team members
• Python, Django, and FastAPI

• Kubernetes, Argo, and Google Cloud Platform
• Experience building full-stack applications from scratch
• Infrastructure as code and DevOps experience

• Accelerated Career Growth!
• Competitive Base Salary and Bonus!

• Develop, implement, and improve welding processes and procedures to enhance product quality and productivity.
• Utilize CAD, AutoCAD, and SolidWorks to design and develop welding fixtures and tooling.
• Lead the implementation of New Product Introduction (NPI) processes for welding operations.
• Apply Lean Manufacturing principles to optimize welding processes and reduce waste.
• Collaborate with cross-functional teams to address and resolve manufacturing, quality, and reliability issues.
• Train and mentor junior engineers and technicians on welding techniques and procedures.
• Conduct root cause analysis of welding defects and implement corrective actions.
• Manage welding equipment maintenance and calibration to ensure optimal performance.
• Stay abreast of the latest advancements in welding technologies and industry best practices.

• Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in weld manufacturing engineering.
• Proven experience with CAD, AutoCAD, and SolidWorks.
• Excellent knowledge of laser and robotic welding techniques.
• Strong understanding of Lean Manufacturing principles.
• Experience with New Product Introduction (NPI) processes.
• Exceptional problem-solving and analytical skills.
• Excellent communication and leadership skills.
• Ability to work effectively in a fast-paced, team-oriented environment.
• Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification is a plus.