Engineering Jobs in Covington Georgia Remote
213 positions found — Page 3
M
Maintenance Tech I
Salary not disclosed
Job Summary Under limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $26.25
- $38.00 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Perform root cause analysis of major downtime events.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.
Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to work overtime as needed.
Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily
- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers
- Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $26.25
- $38.00 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
G
Environment, Health and Safety Manager Sr.
Salary not disclosed
Description
ABOUT GOLDEN STATE FOODS
Golden State Foods is a distinguished leader in the foodservice industry, offering an extensive array of products and services to a diverse clientele. Rooted in the values of quality service and integrity, we are dedicated to creating a supportive and inclusive atmosphere where employees can advance, innovate, and contribute to our ongoing success.
ABOUT THE JOB
Manage and coordinate all activities related to Facilities Environmental, Health, Safety and Training programs to ensure the facilities and company's objectives are met or exceeded.
WHAT YOU'LL DO
- Identify and interpret regulatory standards that impact operational exposures and business activities and guide needed plans to ensure compliance.
- Develop, implement and monitor comprehensive safety processes, training programs and management practices to eliminate all accidents in the workplace and meet all applicable safety rules and company policy. Responsibilities to include: OSHA, ergonomics, machine guarding, hazard communication, powered industrial vehicles, electrical safety, fire protection & emergency preparedness
- Develop, implement, and monitor comprehensive environmental processes and management practices to meet all applicable environmental rules and company policy requirements. Responsibilities to include but not limited to: waste water discharge, solid waste disposal, hazardous waste handling, storage, and disposal, air emissions, spill prevention control and countermeasures, storm water national pollutant discharge elimination system, and ozone depleting substances.
- Identifies and evaluates hazardous conditions and practices, developing practices and programs to correct or reduce their occurrence.
- Provides assistance to plant personnel to improve safety and health of all employees.
- Plans, implements and monitors the day-to-day operations for the Facility’s training schedule, including analyzing operating data and reports, monitoring adherence to standards to ensure business plan objectives are met or exceeded.
- Communicates with Division management and employees and provides relevant reports and analyses to ensure appropriate decision-making as it applies to safety and training. Completes special project assignments as needed.
- Ensures preparation and delivery of all relevant training and materials are compliant with all customer, governmental and Company directives and policies.
- Creates Job Specific Training Modules
- Investigates and reports on serious injuries to line or staff employees.
- Reviews and analyzes company accidents and historical claim experience to identify frequency or severity problems and loss trends. Conduct improvement projects based on findings to improve overall employee health and safety.
- Investigates and responds to employee safety concerns, unemployment claims, and workers compensation claims to provide high quality internal customer service.
- Periodically audits operational procedures and programs related to all aspects of the facility as training is developed and updated.
- Train and coach managers and supervisors on behavior based strategies, accident investigation, hazard identification, self-inspection and employee training.
- Manages assigned trainees, including training, development and validation of performance.
- Attends and coordinates department safety meetings.
- Establish a measuring device for safety performance throughout the facility by motivating individual accountability and reinforcing safety as a critical part of the corporate culture.
WHAT YOU'LL NEED
Education & Experience
BS degree in Engineering, Life Science, Safety, or Risk Management from an accredited college or University.
Certification as a Certified Safety Professional and OSHA 30 Hour is a plus.
5 or more years of relevant work experience in manufacturing safety and human resources.
Skills & Competencies
Project management concepts and techniques
Safety policies, practices and procedures
Regulatory policies and procedures
ISO 14001 Standard
Budgetary concepts and procedures
PC word processing/spreadsheet/presentation/database software
Serve as a team member, facilitator and/or leader as the team role warrants
Manage and motivate employees in a team-based environment
Prepare a variety of comprehensive administrative and technical documents and reports
Prepare and deliver presentations to management, customers, regulatory agencies and other representatives of external organizations
Assist in developing capital improvement cost/benefit analyses and subsequent forms
Travel via airplane and drive an automobile
Work effectively in a general business environment, with a focus on high levels of quality and customer service
WHAT YOU’LL GET
- People First: At Golden State Foods, we're not just a company; we're a dynamic community where your talents are celebrated, and your ambitions are nurtured.
- Values Driven: Our core values drive everything we do, creating a culture of innovation, integrity, and excellence. But we're not content with just being great; we strive for greatness in every aspect of our work.
- People Development: At GSF we strive to continually develop our people to prepare us all for the needs of tomorrow.
- Philanthropy & Sustainability: We're committed to making a difference beyond our walls through philanthropy and sustainability efforts across all our locations around the globe.
- Extensive Benefits: Golden State Foods believes in a holistic approach to wellness focusing on the whole person with benefits that support those needs.
Equal Opportunity Employer:
We’re proud to be an equal opportunity employer. Golden State Foods values diverse perspectives and is committed to creating an inclusive workplace where every person can thrive - respected, supported, and empowered. We believe diversity, in every form, strengthens our team and our communities.
permanent
J
Physical Therapist - Outpatient Sports Medicine -New Grads Accepted
🏢 Jobot
Salary not disclosed
?? Civil Engineer / $80k-$120k / Excellent Culture!
This Jobot Job is hosted by: Matt Desiderio
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $80,000 - $120,000 per year
A bit about us:
We are a civil engineering firm that does site design for several public and private clients. We have 155+ employees across 5 offices and value each individual. We work on a wide variety of projects including: mixed-use commercial developments, urban and suburban multifamily, healthcare, office, high-end resort, and parks and recreation.
Why join us?
- Tremendous growth opportunity!
- GROW YOUR INCOME QUICKLY: Annual review in September, a mid-year review also which happens around March; Usually during those 2 times is when promotions happen that come along with pay increases
- Family-oriented, excellent culture, tight-knit group
Job Details
REQUIREMENTS:
- 4-8+ years of experience in civil engineering, land development, site design; PE or on track to obtain it
- AutoCad Civil 3D proficiency
RESPONSIBILITIES:
- Design & project management for land development projects; Coordinate with clients, outside consultants, project team members, government/municipal officials, and permitting
- Prepare a complete set of construction documents for multiple project types in various jurisdictions with assistance from civil engineering staff (Zoning Issues, Stormwater Design, Subdivision and Commercial Site Layouts, Project Permitting, Project Schedules and Budgets, Preliminary Plats, SWPPP, Grading, Drainage, Water, and Sewer Systems)
- Lead and support civil design for land development projects, including stormwater, utility, and site layout
- Manage project schedules, budgets, documentation, and QA/QC processes
- Mentor junior engineers and designers while continuing to develop your leadership skills
- Support construction administration, prepare permitting packages, and troubleshoot field issues with practical solutions
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Matt Desiderio
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $80,000 - $120,000 per year
A bit about us:
We are a civil engineering firm that does site design for several public and private clients. We have 155+ employees across 5 offices and value each individual. We work on a wide variety of projects including: mixed-use commercial developments, urban and suburban multifamily, healthcare, office, high-end resort, and parks and recreation.
Why join us?
- Strong compensation package which includes a base salary, bonuses distributed 2-3 times per year (12%-15% or more), 401k match, Wellness Program Stipend, Healthcare, etc.
- Tremendous growth opportunity!
- GROW YOUR INCOME QUICKLY: Annual review in September, a mid-year review also which happens around March; Usually during those 2 times is when promotions happen that come along with pay increases
- Family-oriented, excellent culture, tight-knit group
Job Details
REQUIREMENTS:
- 4-8+ years of experience in civil engineering, land development, site design; PE or on track to obtain it
- AutoCad Civil 3D proficiency
RESPONSIBILITIES:
- Design & project management for land development projects; Coordinate with clients, outside consultants, project team members, government/municipal officials, and permitting
- Prepare a complete set of construction documents for multiple project types in various jurisdictions with assistance from civil engineering staff (Zoning Issues, Stormwater Design, Subdivision and Commercial Site Layouts, Project Permitting, Project Schedules and Budgets, Preliminary Plats, SWPPP, Grading, Drainage, Water, and Sewer Systems)
- Lead and support civil design for land development projects, including stormwater, utility, and site layout
- Manage project schedules, budgets, documentation, and QA/QC processes
- Mentor junior engineers and designers while continuing to develop your leadership skills
- Support construction administration, prepare permitting packages, and troubleshoot field issues with practical solutions
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
permanent
E
Environmental, Health and Safety Manager
Salary not disclosed
Microworks America, Inc., a world leader in the polyester film industry, located 35 miles southeast of Atlanta in Covington, GA, is seeking an experienced Environmental, Health and Safety Manager.
Reporting to the Production Director, this role is responsible for leading and advancing a safe, compliant, and environmentally responsible manufacturing operation. The EHS Manager will develop, implement, and oversee all safety, health, and environmental programs while ensuring compliance with local, state, and federal regulations.
JOB DESCRIPTION:
- Develop, implement, and maintain safety policies and procedures in compliance with OSHA and applicableregulations.
- Manage environmental compliance programs, industrial hygiene initiatives, and EPA reporting.
- Lead the site’s emergency response team and safety programs.
- Partner with cross-functional teams to promote a proactive safety culture and continuous improvement.
- Provide technical guidance on equipment design, fire prevention, hazardous materials handling, and safety standards.
- Drive a culture of safety through behavior-based safety training and engagement.
- Investigate accidents, injuries, and property damage; prepare required internal and regulatory reports; implement corrective actions; and manage workers' compensation claims.
- Maintain chemical inventory and hazardous materials documentation.
- Develop and conduct new-hire safety orientation and ongoing safety training programs.
- Lead and facilitate the plant safety committee.
- Interface with local, state, and federal regulatory agencies.
- Lead and maintain the plant’s Environmental Management System (ISO 14001:2015), ensuring continued certification.
JOB REQUIREMENTS:
- Bachelor’s degree in Environmental Engineering, Safety Engineering, EHS, or related engineering field required.
- Minimum 5 years of EHS experience in a manufacturing environment.
- Strong knowledge of OSHA, EPA, and environmental regulations.
- Experience with EHS management systems and regulatory auditing.
- Experience maintaining ISO 14001 certification preferred.
- CSP and/or CHMM certification preferred.
- Six Sigma Green Belt highly desired.
- HAZWOPER training preferred.
- Experience working with hazardous chemicals.
- Experience in a multi-shift continuous operation environment.
- Strong leadership, communication, analytical, and project management skills.
- Experience using Microsoft Office, including the ability to create reports, documents, presentations and spreadsheets in MS Word, MS Excel, and MS PowerPoint.
Why Microworks?
We offer great benefits, a supportive team environment, and real opportunities to grow your career.
Medical, dental, and vision insurance (company pays 97% of premiums)
401(k) with company match
Paid holidays, vacation, and PTO
On-site fitness center
Life & disability insurance, FSA, EAP, and more
Must be authorized to work in the U.S. — No Sponsorship or Relocation Provided.
Microworks America, Inc. is an Equal Opportunity Employer (M/F/D/V) without regard to race, color, religion, sex, gender identity, national origin, age, physical and/or mental handicap, veteran status, disability, sexual orientation, gender identity or expression, pregnancy, genetic information, disability status, protected veteran status or other characteristic legally protected by current federal, state, and local laws and regulations affecting equal employment opportunity.
Not Specified
Head of Products - Remote
✦ New 🏢 Raytheon
$86,800 - 165,200
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. The Test Equipment Engineering (TEE) organization within RTX drives business success by providing a variety of critical engineering services across product lines and functions.
We have an exciting opportunity for a full-time position of Senior Test Systems Integrated Product Manager located onsite in Tucson, Arizona. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.
Direct phases of programs from inception through completion, act as an Integrated Product Manager of multi-disciplinary employees on projects in technical manufacturing and administrative areas.
Oversee and coordinate the administrative and operational aspects of ongoing projects within program guidelines.
Analyze data gathered and develop solutions or alternative methods of proceeding to optimize performance and increase efficiency of work.
Facilitate project tasks with the various functional organizations to ensure alignment with overall project objectives.
Coordinate the preparation of proposals, business plans, proposal work statements and specifications, operating budgets, and financial terms/conditions of contract.
Coordinate with program leadership, finance, and planning to execute Earned Value Management (EVM).
Experience managing a cross functional team (test personnel (electrical, software, mechanical, etc.)).
Presentation experience to executive and/or functional leadership of analytic and program performance results for Test Systems Engineering or equivalent engineering programs.
Experience performing the functionalities of Systems Test Engineering to include experience for both hardware and software development, integration, verification, validation, and maintenance activities within production/manufacturing/product qualification environments.
~ Experience generating Baseline Change Requests (BCR), Basis of Estimates (BOE), and financial performance reports for Program Performance reviews for Systems Test Engineering.
~ S. government issued security clearance is required. S. citizens are eligible for a security clearance.
Experience with all the functionalities of Automation Test Equipment/Unit Under Test (ATE/UUT).
Agile Methodologies understanding
Scrum Master / Azure DevOps (ADS) Experience
Running and maintaining Test Equipment Modification Authorization (TEMA) review boards and sustainment driven work teams
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Clearance Information: This position requires the eligibility to obtain a security clearance. Non-US citizens may not be eligible to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
• This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. The Test Equipment Engineering (TEE) organization within RTX drives business success by providing a variety of critical engineering services across product lines and functions.
We have an exciting opportunity for a full-time position of Senior Test Systems Integrated Product Manager located onsite in Tucson, Arizona. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.
Direct phases of programs from inception through completion, act as an Integrated Product Manager of multi-disciplinary employees on projects in technical manufacturing and administrative areas.
Oversee and coordinate the administrative and operational aspects of ongoing projects within program guidelines.
Analyze data gathered and develop solutions or alternative methods of proceeding to optimize performance and increase efficiency of work.
Facilitate project tasks with the various functional organizations to ensure alignment with overall project objectives.
Coordinate the preparation of proposals, business plans, proposal work statements and specifications, operating budgets, and financial terms/conditions of contract.
Coordinate with program leadership, finance, and planning to execute Earned Value Management (EVM).
Experience managing a cross functional team (test personnel (electrical, software, mechanical, etc.)).
Presentation experience to executive and/or functional leadership of analytic and program performance results for Test Systems Engineering or equivalent engineering programs.
Experience performing the functionalities of Systems Test Engineering to include experience for both hardware and software development, integration, verification, validation, and maintenance activities within production/manufacturing/product qualification environments.
~ Experience generating Baseline Change Requests (BCR), Basis of Estimates (BOE), and financial performance reports for Program Performance reviews for Systems Test Engineering.
~ S. government issued security clearance is required. S. citizens are eligible for a security clearance.
Experience with all the functionalities of Automation Test Equipment/Unit Under Test (ATE/UUT).
Agile Methodologies understanding
Scrum Master / Azure DevOps (ADS) Experience
Running and maintaining Test Equipment Modification Authorization (TEMA) review boards and sustainment driven work teams
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Clearance Information: This position requires the eligibility to obtain a security clearance. Non-US citizens may not be eligible to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
• This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
permanent
Head of Financial Products (Remote)
✦ New 🏢 Raytheon
$86,800 - 165,200
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. The Test Equipment Engineering (TEE) organization within RTX drives business success by providing a variety of critical engineering services across product lines and functions.
We have an exciting opportunity for a full-time position of Senior Test Systems Integrated Product Manager located onsite in Tucson, Arizona. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.
Direct phases of programs from inception through completion, act as an Integrated Product Manager of multi-disciplinary employees on projects in technical manufacturing and administrative areas.
Oversee and coordinate the administrative and operational aspects of ongoing projects within program guidelines.
Analyze data gathered and develop solutions or alternative methods of proceeding to optimize performance and increase efficiency of work.
Facilitate project tasks with the various functional organizations to ensure alignment with overall project objectives.
Coordinate the preparation of proposals, business plans, proposal work statements and specifications, operating budgets, and financial terms/conditions of contract.
Coordinate with program leadership, finance, and planning to execute Earned Value Management (EVM).
Experience managing a cross functional team (test personnel (electrical, software, mechanical, etc.)).
Presentation experience to executive and/or functional leadership of analytic and program performance results for Test Systems Engineering or equivalent engineering programs.
Experience performing the functionalities of Systems Test Engineering to include experience for both hardware and software development, integration, verification, validation, and maintenance activities within production/manufacturing/product qualification environments.
~ Experience generating Baseline Change Requests (BCR), Basis of Estimates (BOE), and financial performance reports for Program Performance reviews for Systems Test Engineering.
~ S. government issued security clearance is required. S. citizens are eligible for a security clearance.
Experience with all the functionalities of Automation Test Equipment/Unit Under Test (ATE/UUT).
Agile Methodologies understanding
Scrum Master / Azure DevOps (ADS) Experience
Running and maintaining Test Equipment Modification Authorization (TEMA) review boards and sustainment driven work teams
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Clearance Information: This position requires the eligibility to obtain a security clearance. Non-US citizens may not be eligible to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
• This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. The Test Equipment Engineering (TEE) organization within RTX drives business success by providing a variety of critical engineering services across product lines and functions.
We have an exciting opportunity for a full-time position of Senior Test Systems Integrated Product Manager located onsite in Tucson, Arizona. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.
Direct phases of programs from inception through completion, act as an Integrated Product Manager of multi-disciplinary employees on projects in technical manufacturing and administrative areas.
Oversee and coordinate the administrative and operational aspects of ongoing projects within program guidelines.
Analyze data gathered and develop solutions or alternative methods of proceeding to optimize performance and increase efficiency of work.
Facilitate project tasks with the various functional organizations to ensure alignment with overall project objectives.
Coordinate the preparation of proposals, business plans, proposal work statements and specifications, operating budgets, and financial terms/conditions of contract.
Coordinate with program leadership, finance, and planning to execute Earned Value Management (EVM).
Experience managing a cross functional team (test personnel (electrical, software, mechanical, etc.)).
Presentation experience to executive and/or functional leadership of analytic and program performance results for Test Systems Engineering or equivalent engineering programs.
Experience performing the functionalities of Systems Test Engineering to include experience for both hardware and software development, integration, verification, validation, and maintenance activities within production/manufacturing/product qualification environments.
~ Experience generating Baseline Change Requests (BCR), Basis of Estimates (BOE), and financial performance reports for Program Performance reviews for Systems Test Engineering.
~ S. government issued security clearance is required. S. citizens are eligible for a security clearance.
Experience with all the functionalities of Automation Test Equipment/Unit Under Test (ATE/UUT).
Agile Methodologies understanding
Scrum Master / Azure DevOps (ADS) Experience
Running and maintaining Test Equipment Modification Authorization (TEMA) review boards and sustainment driven work teams
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Clearance Information: This position requires the eligibility to obtain a security clearance. Non-US citizens may not be eligible to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
• This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
permanent
Lead, Project Management - Remote
✦ New 🏢 Raytheon
$86,800 - 165,200
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications. This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.
The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
- Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements.
- Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions.
- Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts.
- Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies.
- Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.
Qualifications You Must Have:
- Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:
- Experience with proactive and reactive component obsolescence management methodologies.
- Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues.
- Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process.
- Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs.
- Experience with BOM (Bill of Material) development and management for developmental and production programs.
- Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions.
Qualifications We Prefer:
- Master’s Degree in Electrical Engineering or other related science or engineering discipline
- Ability to navigate multiple complex processes and tools.
- Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field.
- Ability to read and interpret engineering drawings and hierarchy definition.
- Knowledge of component failure modes by commodity
- Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs
- Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications
- Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces
- Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.
- Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations.
- Outstanding organizational, presentation and technical skills.
- Ability to multi-task and appropriately prioritize responsibilities.
- Willingness to support occasional travel.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
permanent
Team Leader, Short Term Disability- REMOTE
✦ New 🏢 Raytheon
$86,800 - 165,200
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications. This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.
The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
- Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements.
- Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions.
- Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts.
- Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies.
- Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.
Qualifications You Must Have:
- Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:
- Experience with proactive and reactive component obsolescence management methodologies.
- Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues.
- Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process.
- Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs.
- Experience with BOM (Bill of Material) development and management for developmental and production programs.
- Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions.
Qualifications We Prefer:
- Master’s Degree in Electrical Engineering or other related science or engineering discipline
- Ability to navigate multiple complex processes and tools.
- Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field.
- Ability to read and interpret engineering drawings and hierarchy definition.
- Knowledge of component failure modes by commodity
- Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs
- Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications
- Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces
- Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.
- Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations.
- Outstanding organizational, presentation and technical skills.
- Ability to multi-task and appropriately prioritize responsibilities.
- Willingness to support occasional travel.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
permanent
T
Physician / Ohio / Permanent / SAP FICO Lead(Remote) Job
✦ New
Salary not disclosed
A tech services company in Ohio is looking to add a newSAP FICO Lead to their growing team in a Remote capacity.
In this role, the SAP FICO Lead (Remote)will be responsible for providing incident, change request and enhancement support to customers, including processingAMS customer incidents, change requests, services requests, problems and changes.
Responsibilities: TheSAP FICO Lead (Remote)will be responsible for: Ensuringconsistent delivery of minor and major enhancements, project work including mini-projects, upgrades, roll-outs and other SAPFICOenhancement projects Effectively usingand improvingmethodology approaches and supporting tools Providinglong term dedicated SAPFICOsupport to one or more Strategic Accounts Monitoringand processing AMS customer problems and changes Processing and resolving work classified as Level 2 and 3 issues Proactive followingup of issues that are in customer action Establishing credibility and relationships with client decision makers, know their business, their industry, their culture, and their top priorities Performing other duties, as needed Qualifications: 5+ years of experience withSAPFICOproject implementation or production support in multiple modules /sub-modules Bachelors Degree in a related field (Accounting, Finance, Industrial Engineering, Mechanical Engineering, Marketing, Sales, etc.) Experience in multiple, full lifecycle SAP implementations Previous Leadership experience on SAP implementation projects or production support Experience configuring multiple SAP modules OR experience across multiple industries Integration experience with other process areas Desired Skills: Master's Degree
Remote working/work at home options are available for this role.
In this role, the SAP FICO Lead (Remote)will be responsible for providing incident, change request and enhancement support to customers, including processingAMS customer incidents, change requests, services requests, problems and changes.
Responsibilities: TheSAP FICO Lead (Remote)will be responsible for: Ensuringconsistent delivery of minor and major enhancements, project work including mini-projects, upgrades, roll-outs and other SAPFICOenhancement projects Effectively usingand improvingmethodology approaches and supporting tools Providinglong term dedicated SAPFICOsupport to one or more Strategic Accounts Monitoringand processing AMS customer problems and changes Processing and resolving work classified as Level 2 and 3 issues Proactive followingup of issues that are in customer action Establishing credibility and relationships with client decision makers, know their business, their industry, their culture, and their top priorities Performing other duties, as needed Qualifications: 5+ years of experience withSAPFICOproject implementation or production support in multiple modules /sub-modules Bachelors Degree in a related field (Accounting, Finance, Industrial Engineering, Mechanical Engineering, Marketing, Sales, etc.) Experience in multiple, full lifecycle SAP implementations Previous Leadership experience on SAP implementation projects or production support Experience configuring multiple SAP modules OR experience across multiple industries Integration experience with other process areas Desired Skills: Master's Degree
Remote working/work at home options are available for this role.
permanent
FULL TIME Lead Platform Engineer with Python Programming & AWS Cloud - HYBRID ONSITE (DIRECT HIRE)
✦ New
Salary not disclosed
Please send current resumes directly to
Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG
TIME Lead Platform Engineer with Python Programming & AWS Cloud - HYBRID ONSITE
Location Flexibility: This role is based 4 days per week in either Boston MA or Needham MA, with occasional travel between offices as needed.
Candidates requiring visa sponsorship are welcome to apply!
FROM THE HIRING MANAGER - for our Platform Engineering team what we’re looking for are people who have experience building technology to be used by other development teams (not business users).
THE POSITION We are currently seeking qualified candidates for a Lead Software Engineer position for our Platform Engineering team which is responsible for designing and building tools and workflows for our internal software engineering teams. These systems will allow them to build and deploy applications effortlessly, allowing them to focus on building business functionality for their users. Your work will directly support enterprise-wide initiatives, helping teams across the organization streamline operations, improve reliability, and accelerate delivery. This role is ideal for someone who enjoys solving complex technical problems and collaborating with other engineers to create highimpact internal platforms. The ideal candidate should have experience enabling IT organizations to work more efficiently, standardize best practices, and reduce friction across the development lifecycle. This includes creating reusable components, automation frameworks, and platform capabilities that empower our engineering teams.
KEYS TO THE POSITION
Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG
TIME Lead Platform Engineer with Python Programming & AWS Cloud - HYBRID ONSITE
Location Flexibility: This role is based 4 days per week in either Boston MA or Needham MA, with occasional travel between offices as needed.
Candidates requiring visa sponsorship are welcome to apply!
FROM THE HIRING MANAGER - for our Platform Engineering team what we’re looking for are people who have experience building technology to be used by other development teams (not business users).
THE POSITION We are currently seeking qualified candidates for a Lead Software Engineer position for our Platform Engineering team which is responsible for designing and building tools and workflows for our internal software engineering teams. These systems will allow them to build and deploy applications effortlessly, allowing them to focus on building business functionality for their users. Your work will directly support enterprise-wide initiatives, helping teams across the organization streamline operations, improve reliability, and accelerate delivery. This role is ideal for someone who enjoys solving complex technical problems and collaborating with other engineers to create highimpact internal platforms. The ideal candidate should have experience enabling IT organizations to work more efficiently, standardize best practices, and reduce friction across the development lifecycle. This includes creating reusable components, automation frameworks, and platform capabilities that empower our engineering teams.
KEYS TO THE POSITION
- 10+ years of experience in software engineering
- Proficient in Python with experience building tools using widely adopted libraries such as Pandas, NumPy, Requests, BeautifulSoup, FastAPI, and SQLAlchemy
- Skilled in packaging, testing, and deploying Python applications using tools like pytest, setuptools, and Docker
- Hands-on experience designing, deploying, and managing cloud-native applications using AWS services (e.g., EC2, Lambda, S3, RDS, CloudFormation), with a strong grasp of scalable and secure architecture principles.
- Experience designing and operating DevOps platforms including CI/CD pipelines, infrastructure as code (e.g., Terraform, Jenkins), and container orchestration using ECS or EKS - Experience designing and operating monitoring, logging, and performance optimization tools (e.g., OpenSearch, Open Telemetry, CloudWatch, X-Ray)
- Excellent written and verbal communication
- Attention to detail, self-discipline, and passion to drive and innovate
- Must be comfortable with test-driven development, continuous integration, and agile development methodologies using tools like GIT, Artifactory, and Jenkins
- Experience working with offshore development teams is a plus
- Bachelor’s degree in computer science, engineering, math, or related field, or equivalent experience is preferred
Estimated Min Rate: $140,000.00
Estimated Max Rate: $165,000.00
What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:
- Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
- Health Savings Account (HSA) (for employees working 20+ hours per week)
- Life & Disability Insurance (for employees working 20+ hours per week)
- MetLife Voluntary Benefits
- Employee Assistance Program (EAP)
- 401K Retirement Savings Plan
- Direct Deposit & weekly epayroll
- Referral Bonus Programs
- Certification and training opportunities
Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Visit to contact us if you are an individual with a disability and require accommodation in the application process.
For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: working/work at home options are available for this role.
permanent
jobs by
✓ All jobs loaded