Engineering Jobs in Columbus, OH

AGE Solutions is seeking an Audio-Visual Command Meeting (AVCM) Engineer. In this role, you will travel within their assigned zone to support Senior Executive Services (SES) and Military Officer conference and meeting spaces. This role provides installation, troubleshooting, and sustainment support for enterprise audio-visual systems and will augment support to other zones as required. The ideal candidate is a hands-on AV professional with strong technical expertise, the ability to lead AV efforts on-site, and experience working in classified environments.

This position is based out of Columbus, OH with regional CONUS travel requirements.

Key Responsibilities:

• 
  
• Travel within assigned zone and provide augmentation support to other zones as needed
  
• Support SES and Military Officer conference and meeting spaces
  
• Install, pull, terminate, label, and test all AV-related cables, connectors, and interfaces
  
• Install projection screens, plasma/LED displays, speakers, and related AV hardware
  
• Perform installation of AV systems at client sites, including full room deployments
  
• Read and interpret blueprints, drawings, and technical documentation
  
• Wire and build AV racks to standard and customer specifications
  
• Serve as the Lead Audio Visual Engineer on projects and customer engagements
  
• Manage AV projects across various models and makes of equipment
  
• Conduct testing, analysis, troubleshooting, and corrective actions on systems, networks, hardware, and software
  
• Demonstrate thorough understanding of AV wiring standards and connector types across AV cable types
  
• Support internet-based video solutions including switchers, codecs, interfaces, and room design solutions
  
• Access classified areas to support Enterprise JWICS installation and troubleshooting of system hardware (user account not required).
  

Required Qualifications:

• 
  
• Five (5) years of relevant experience with AV engineering
  
• Must have an active DoD Top Secret clearance at a minimum
  
• Must have one (1) of the following certifications:
  
  • 
    
  • AMX Technician (Networked AV) Certification
    
  • Crestron CTI Technician Track Certification
    
  • AVIXA CTS Certification
    
  
  
  
• Ability to support mission-critical AV/VTC systems under pressure
  
• Demonstrated experience working with:
  
  • 
    
  • Crestron
    
  • Cisco
    
  • Biamp / AMX
    
  • Extron
    
  
  
  
• Willingness to travel throughout the zone as required
  
• Strong troubleshooting skills to quickly diagnose and restore AV/VTC services
  
• Ability to follow escalation procedures and provide status updates and corrective action plans to leadership/PMO
  
• Experience using a ticketing system (e.g., ServiceNow) to document troubleshooting, actions taken, and resolution details
  
• Ability to provide routine ticket updates until closure and document root cause and resolution steps
  
• Ability to provide daily operational status reporting for non-operational rooms, including estimated restoration timelines
  
• Location: This position is onsite at our customer's location in Columbus, OH and requires up to 50% travel (CONUS).
  

Compensation: $70,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

Job Title: Food Quality Project Manager

Location: Columbus, OH 43219

Duration: 10 Months

Job Description:

• Bachelor’s degree in a relevant discipline/or equivalent work experience is required (Business Administration, Chemistry, Microbiology, Food Science, Engineering).
• 5-7 years in a regulated nutritional food-manufacturing environment, preferably pediatric or medical nutrition products, in a Quality, R&D, Project Management, Procurement or Operations function and good knowledge of food GxP and nutritional regulations.
• Knowledge in nutritional manufacturing controls and quality systems.
• 3-5 years’ experience in project leadership roles.
• Project Management Professional (PMP) certification by theProject Management Institute (PMI)
• Ingredient expertise, process expertise, and formulation expertise in nutritional and infant concepts.
• Continuous improvement methods and application (for example: Lean, Six Sigma, Class A, etc.).

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

This is a very exciting time for Thryv as we are making waves in becoming an international leading SaaS and platforms business provider for Small to Medium-Sized Businesses (SMB’s). We’ve been around in one form or another for more than 125 years, always with one goal in mind – helping small businesses compete and win. We provide the technology, software and local business automation tools that small businesses need to better manage their time, communicate with clients, and get paid so they can take control of their business and be more successful. Thryv is a seven-time winner of Selling Power Magazine’s Top 60 companies to Sell For, as well as Newsweek’s list of America’s 100 most loved global workplaces for 2024 and 2025!

Thryv, Inc. - Thryv Makes Selling Power’s Annual 60 Best Companies to Sell for List for Seventh Consecutive Year

Global Most Loved Workplaces 2025 - Newsweek

About the role:

Based in the Columbus, Ohio area, this role is responsible for increasing Thryv’s penetration to the existing client base, increasing client engagement with existing software clients, and growing the SaaS client base through new sales. This role calls on existing clients to nurture and grow relationships while identifying and pursuing new client opportunities to meet a predetermined sales quota. The Software Account Executive conducts greater than 50% of their work outside their home office (to visit local businesses).

• Identifies and secures new SaaS clients by leveraging self-generated prospecting (i.e. networks, referrals, etc.) and company-initiated prospecting programs (90%)
• Contacts assigned clients and presents opportunities for additional sales and/or extended usage based on client needs (10%).
• Executes all defined operational processes and requirements with excellence (i.e., designed cadences for client and prospect engagement, ongoing product and demo certifications, order entry requirements, centralized intake forms, etc.).
• Participates in sales meetings, call calibrations, and training as needed.

About Thryv- End-to-end client experience platform:

Thryv provides a secure, easy-to-use platform that automates tasks and allows clients to put their customers at the center of their business. Our software offers Customer Relationship Management (CRM), Search Engine Optimization, Marketing, online invoices & receipts, text messaging, email marketing, print and social media management. This automation provides the edge local businesses need to better succeed in their market.

We do it all with a convenient client experience management app that allows small business owners to get the job, manage the job and get credit all from the palm of their hand.

In This Role, You’ll Get To:

• Help market, sell and grow local business market share
• Defend small business America and the American Dream
• Hunt for new business (90%), as well as take care of existing clients (10%)
• Become a SaaS (Software as a Service) expert
• Receive world-class training (8 weeks virtual)
• Have the support of a four-time winner of The Top 60 Companies to Sell For company with a 125+ year legacy
• Educate and guide prospects through the buyer’s journey to help them learn how Thryv can grow their business
• Partner with marketing and technology departments to execute sales strategy as the company introduces enhancements to existing solutions and/or releases new products
• Bring your thinking, strategies and ideas to advance our company’s values, unique culture and vision for the future

We Are Looking for People Who:

• We are seeking driven and hungry individuals to strategize and offer our unique software solutions to local business owners
• Who are engagement gurus while properly managing expectations
• Have the desire and commitment to do what it takes to be successful in sales
• Have a positive outlook and a strong ability to take responsibility for their successes and failures
• Goal oriented…you’re known for destroying your sales goals
• Persuasive…you can explain software solutions in simple terms
• Exceed sales quotas and expectations
• Build and nurture a pipeline of prospects and close deals
• Develop great solutions to help customers WIN!
• Comfortable working in a remote capacity: Hi-Speed internet, acceptable office setting and proper business attire is a must.

Basic Qualifications

• 4+ years of related sales experience (7+ years is preferred)
• 3+ years of experience in an (outbound) full sales cycle role is required
• Experience in a SaaS role or company is preferred, but not required
• The ideal candidate will have experience in Enterprise-level sales (not a requirement)
• Strong industry knowledge with the ability to gain a thorough understanding of the Thryv product suite
• Exceptional interpersonal and communication skills, both written and verbal, with strong emotional intelligence, adaptability, and the ability to build relationships.
• Time and organization skills with the ability to effectively manage multiple priorities with competing schedules or conflicting demands
• Ability to work independently in a remote-first environment, effectively conducting sales presentations while following company established processes and procedures
• Strong technical skills with proficiency in MS office and the ability to learn new programs and systems
• Associate degree (or international equivalent) or equivalent experience required

Who We Are

At Thryv, we’re a team fiercely devoted to the success of local businesses. We’ve been around for over 100 years, always with one goal in mind — helping small businesses compete, win and succeed. We provide the technology, software and local business automation tools small business owners need to better manage their time, communicate with clients, and get paid, so they can take control of their business and be more successful. We support businesses across the U.S., and we have team members all around the country (even internationally). In fact, we’re a work-from-anywhere company, because that’s how we get the work done. Culture is vital at Thryv because it shapes our identity and, therefore, our measurements for growth. We have an identified set of values that hold all of us accountable, paving the way for our company success and our legacy. All of this helps us deliver results for our clients and creates success for our employees. Here at Thryv, making a positive impact within our team and in our local community is the reason we get out of bed every morning.

Find out more at /careers/

Belonging at Thryv

We believe in a work environment where all individuals are treated fairly and respectfully, have equal access to opportunities and resources, and can contribute fully to the organization’s success. We want our employees to feel a part of something big, and we encourage the sharing of ideas and collaboration across the organization. We strive to ensure our work environment reflects diversity, fairness and meritocracy. We believe all employees should have the opportunity to perform effectively in their position. We value every employee and the authenticity they bring to their role and to the organization. As a result, our employee policies and internal practices focus on ability and merit as the standards for success.

Requisition Detail and Process

This information indicates the general nature and level of work performed by employees in this job. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. The final job level offered may vary based on the applicant’s competencies and qualifications such as experience and education, and other job-related reasons.

Our Commitment to Equal Opportunity

Thryv is proud to provide equal employment opportunities to all employees and applicants, without regard to gender, color, race, religion, sexual orientation, national origin, citizenship, age, disability, veteran status, pregnancy, genetic information, or any characteristic protected by law. Thryv is committed to provide equal employment opportunities throughout the employment relationship including recruitment, hiring, discharge, compensation, benefits, discipline, development, and advancement or other aspects of employment.

The estimated on-target earnings (OTE) for this role, which includes base salary and incentives, is $137,100 per year, with the potential to earn more in most U.S. locations. Final offer amounts are determined based on the candidate’s location and may vary from the figure listed above.

Job Title: Associate Engineer/Automation Technician

Location: New Albany, OH

Duration: 12+ Months

Note:

Fully onsite New Albany, OH

Shift details: PM shift 6:00 pm – 6:30 am, 2-2-3 schedule.

Ideal candidate is an Automation Technician (2 years) with strong hands-on PLC troubleshooting skills, ladder logic reading, HMI familiarity, and packaging equipment experience. Able to collaborate with mechanical techs, and adept at diagnosing electrical/automation issues in a GMP manufacturing environment. Industry background is flexible; key requirement is practical automation experience. Strong communication and problem-solving skills are essential.

In this role, you will provide technical engineering support on all system/equipment optimization strategies, upgrades, replacements, and modifications. You will evaluate and determine if utility systems, process maintenance, instrumentation/ calibration/electrical systems and technical cleaning systems are maintained in compliance with all applicable industry standards, regulatory standards and FDA standards in the Inspection and Packaging area in Non-Standard Shifts structure.

Take part in the coordination of tech support on engineering, regulatory, compliance, calibration, quality, microbial/environmental, technical cleaning, validation, electrical, and process automation issues.

Assist during regulatory agency inspections. Provide technical support in response to the FDA and other regulatory agencies.

Support cGMP validation of equipment and processes.

Complete advanced maintenance activities or operate and monitor sophisticated plant support equipment in accordance with CFRs, cGMPs, SOPs, job plans, and Client policies.

Investigate complex issues or problems through the mentorship of experienced staff.

Assist the team with maintaining an up-to-date working spare parts inventory system for equipment/systems.

Evaluate the current maintenance procedures and assist in the changes to optimize the maintenance program troubleshoot and repair equipment/system failures.

Interpret and review utility, process system/equipment, plumbing, ductwork plans, architectural, and HVAC P&ID's.

Support Operations using Current Good Manufacturing Practices (cGMP).

Support Operations in non-standard shifts that include weekends and/or holidays as determined by the business.

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential-related building projects.

The Role We Want You For

In this role, you will manage the organization and direction of project construction activities and oversee total site management including supervision of client contractors, field engineering, contract administration, cost and schedule, field procurement, and finance and accounting. Your leadership will ensure project operations are compliant, safe, timely, within scope and budget, and clients are satisfied.

This key project leader for Clayco’s Field Operations team will oversee construction of 100MM - 500MM or more and will be assigned to the as the Construction Manager/Superintendent on Mission Critical projects.

The Specifics of the Role

• Responsible for the organization and direction of all on-site construction related activities and the primary contact for all project field activities.
• Ensure construction operations are in compliance with design, specifications, and that construction operations are completed on schedule, within budget and to quality standards.
• Responsible for site management including management of construction subcontractors, professional staff to include field engineering, contract administration, cost and schedule, field procurement, finance and accounting services, and workforce services. Responsible for managing and maintaining detailed daily reports.
• Ensures the development and execution of project automation plan, environmental compliance plan, safety plan, site survey plan, non-manual staffing plan, subcontracting plan, labor strategy, construction execution plan, and job-site work rules.
• Responsible for implementation of Clayco’s safety program, security, housekeeping, and fire protection on the construction site and ensures strict adherence Federal and State safety codes.
• Ensures the field organization is composed of qualified and knowledgeable personnel and ensures effective personnel utilization.
• Establishes and implements construction schedules, methods, manning charts, material, and equipment requirements.
• Responsible for field project performance and analyzes performances for adherence to quality standards and schedules.
• Plans and establishes procedures to ensure all construction operations meet engineering designs and specifications.
• Ensures Clayco’s policies and procedures are fully implemented.
• Establishes project field procedures to be worked in conjunction with the Clayco’s standards, as necessitated by project conditions.
• Collaborates with the jobsite team to ensure labor harmony throughout the project.
• Partners with the project management team to maintain effective client relationship and is the primary contact for client's communication with the field activities.
• Maintains effective relationships with other functional departments.
• Develops, implements, and administers a job-site security plan and coordinates the activities with Clayco’s security department.
• Works with the project management team to participate in all job-site's contractual activities. Participates in contracts and subcontracts negotiations.
• Participates in the development and implementation of a training program to ensure subordinate personnel receives progressive training to enable them to assume additional responsibilities and is responsible for overall development of construction training and any testing as required.
• Works with Clayco’s safety team in the development of the project safety program and ensures strict adherence to Company, federal, state, and local safety regulations.
• Ensures the implementation of an effective community relations plan for the site.
• Ensures required permits and licenses are in place prior to the start of the affected work at site.
• Responsible and accountable for construction license reporting to include construction Logbook entries and required notifications for permit closure.
• Partners with the project management team for the implementation of cost savings methodologies in the Construction organization and the promotion of other continuous improvement processes.
• Ensures development and execution of strategies and plans for project automation, environmental compliance, safety, site surveying, non-manual staffing, contracting, labor strategy, construction execution, and job-site work rules.
• Plans and establishes procedures to ensure construction operations meet engineering designs and specifications.
• Coordinate with the Field Operations Manager for all assignment of Superintendent and Foreman positions.
• Support Superintendent(s) throughout the duration of the job.
• Review project schedules with Superintendents/Foreman.
• Document project field issues that impact budget, quality, or schedule, and provide to the project management team.
• Ensure subcontractor requests for field issues that impact budget, quality, or schedule are documented and are forwarded to the project management team.
• Follow guidelines of the Project Quality Assurance/Quality Control (QA/QC) program written for the job site.

Requirements

• Bachelor's or Master's Degree in Civil Engineering, Construction Management, related technical degree or relevant work experience in lieu of education.
• 20-25 years of relevant experience, with progressive responsibility and technical knowledge both scope and value of project.
• Technical knowledge and experience of relevant construction methods and systems including:
• Utility relocates and slope stability works.
• Full understanding of multiple mission critical platforms.
• Full understanding and working knowledge of high voltage, medium voltage, and low voltage systems. General understanding of BMS and EPMS Systems.
• Full understanding and coordination of Utility relocations, underground medium voltage systems, and BIM modeling coordination of ALL utilities both above and below ground.
• Full understanding and managing of all LOTO procedure's and FOD inspections for all systems.
• Ability to research and understand local codes and jurisdictional requirements for the project.
• Knowledge of project-specific environmental compliance requirements.
• Experience with successful interface management on Data Center/Mission Critical projects.
• OSHA 30 required.
• Ability to walk the job site, climb ladders, and multi floor scaffolding.
• Ability to lift objects at least 50lbs.

Some Things You Should Know

• This position will service our clients in Columbus area
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!
• This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing.

Why Clayco?

• 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2025 ENR Midwest – Midwest Contractor (#1).
• 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3).
• 2025 ENR Top 25 Data Center Builders – Data Center Contractor (Top 3).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Overview

This role supports construction management and civil infrastructure projects by coordinating field staff, maintaining project documentation, and ensuring work is completed safely and in accordance with project specifications. The position is suited for candidates with hands‑on construction, inspection, or civil engineering experience who are ready to take on broader project management responsibilities.

Must‑Haves

• Experience managing construction or civil infrastructure projects
• Background in civil engineering, construction management, or inspection
• Ability to coordinate field staff (inspectors and technicians)
• Strong communication and documentation skills
• Valid driver’s license and ability to visit active construction sites
• Bachelor’s degree in Civil Engineering, Construction Management, or related field OR equivalent experience

Plusses

• EIT
• Working toward PE
• PMP or CCM certification
• Associate’s degree in Construction Management
• Materials testing or inspection experience
• Surveying experience
• Experience with municipal, roadway, waterline, or public works projects
• Experience with ODOT or City of Columbus projects

Day‑to‑Day

• Manage construction and infrastructure projects from planning through completion
• Coordinate inspectors, technicians, and other field staff
• Monitor project scope, schedule, budget, and documentation
• Serve as the primary point of contact for project stakeholders
• Lead project meetings and resolve field or schedule issues
• Review contracts, change orders, and project milestones
• Support construction inspection and materials testing activities as needed
• Ensure compliance with safety standards, project specifications, and municipal requirements

Who You Are: You're a dynamic problem-solver with a passion for construction. Detail-oriented and driven, you thrive in collaborative environments and excel at managing multiple responsibilities. You're ready to take on challenges head-on and contribute to meaningful projects that make a difference.

The Opportunity: You’ll play a vital role in managing construction processes and driving project success. This role offers dynamic work, opportunities for growth, and a chance to make a significant impact in the Water, Wastewater, Industrial, and Energy sectors.

Who We Are: Our people are our strength. As an employee-owned national construction company, we prioritize collaboration, innovation, and continuous improvement. We're committed to fostering a culture of growth and empowerment, where every team member is valued and supported.

What You’ll Do:As a Project Engineer, you'll work closely with the Project Manager and Superintendent to manage all construction processes effectively. From scheduling to safety, your responsibilities will include:

• Implementing Bowen's SQP process
• Supporting Field Engineer duties to ensure project success
• Facilitating communication with stakeholders
• Streamlining purchasing processes and coordinating submittals
• Identifying and addressing potential issues proactively
• Participating in project status meetings and reporting on progress
• Contributing to site safety audits and upholding safety standards
• Assisting in project close-out activities and estimating project divisions

Why You’ll Love Working At Bowen:

• The Right Size: Large enough for great resources, small enough that you'll personally know our leadership and they’ll know you.
• Hands-On Experience: Work directly with Craft, PMs, Superintendents, and Engineering Partners, seeing the work unfold daily. We self-perform, fostering teamwork rather than just managing subcontractors.
• Growth Opportunities: The sky's the limit if you’re willing to work hard, be patient, and take initiative. We're committed to developing future leaders and invest in your growth.
• Safety First: "Zero Injury and Genuine Concern for Others." We don’t do shortcuts. We’ve built a culture where teams are empowered to speak up and continuously improve safety.
• Build Unique Projects: Our strength lies in deep, heavy, complex work. The variety will challenge you and keep things exciting.
• Strong Support System: We provide the training and team you need. Besides on-the-job training, we offer annual and bi-annual sessions at corporate, ensuring you're surrounded by a strong support system.
• Hard Work, Big Rewards: The work is tough but incredibly rewarding. We believe in Celebrating Success and encourage you to use your PTO. Our company trips and close-knit teams foster lasting friendships. While construction means some travel, we do our best to keep you close to home and always have your back.

Must-haves in a Candidate:

• Bachelor's degree in construction/engineering or equivalent technical training
• 2+ years of construction experience
• Strong communication and interpersonal skills
• Proficiency in computer applications
• Sound understanding of cost analysis principles

Nice to Haves in a Candidate:

• Experience working with self-perform construction operations
• Experience with advanced scheduling techniques
• Knowledge of value engineering principles
• Familiarity with construction safety standards and procedures

Additional Details:

• This position will support our Columbus, OH operation. Must be comfortable with potential travel throughout the week.

Benefits:

• Competitive Base Salary
• Medical, Dental and Vision Insurance
• PTO from Day 1
• 7 Paid Holidays (plus 6 additional half-days), 1 Community Day, 1 Floating Holiday
• Paid Parental Leave
• Annual Discretionary Bonuses
• Car Allowance
• Employer-paid Life Insurance with supplemental options
• 401k with Company Match
• HSA and FSA options
• Employee Referral Program
• Wellness Program
• Employee Assistance Program (EAP)
• Short and Long-Term Disability
• Family Planning and Adoption Assistance
• Education Reimbursement

Who is IC?

Independence Construction is seeking an experienced estimator to join our growing team in Columbus, OH.

Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner’s approach to projects through the company’s work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community.

What do we believe in?

PEOPLE:

Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets.

PERFORMANCE:

Always deliver the highest quality. Find solutions. Provide value to our partners.

COMMUNITY:

Positively impact the communities we serve. Give back. Leave the world a better place than we found it.

As an Estimator you're responsible for all estimating responsibilities on one or more construction projects for the duration of projects assigned; work with the project manager and project executive to achieve successful completion of projects; interface with current and prospective clients regarding cost and/or design issues.

• Act as the design phase coordinator during the schematic, design development, and construction documents phases of a project, including responsibility for completing all estimating tasks on schedule and in accordance with IC’s standards for quality and detail.
• Provide thorough, accurate and competitive bids for projects and estimates for project budget, including technical takeoffs, analysis of contract documents, cost analysis and communications with subcontractors.
• Develop selection of most economical systems to be utilized in preparation of bids, in conjunction with operations personnel.
• Ensure that all estimates, schedules, constructability reviews, value engineering efforts, cost report planning and purchase planning efforts and documents are prepared as scheduled.
• Review and develop a thorough understanding of all front-end contract documents and subcontractor contracts for rights and responsibilities under each and coordination of same.
• Administrate and monitor compliance with construction contracts with Owners, subcontractors and vendors during the schematic, design development and construction documents phases.
• Establish and/or identify for team use the criteria applicable to the project, e.g., wage rates, time frames, etc.
• Follow-up on and evaluation of status of the project.
• Perform constructability reviews.
• Plan construction sequence and site utilization in conjunction with project manager and team.
• Estimate general conditions and arrange for general conditions to be completed.
• Work with Marketing/Business Development on assigned projects to distribute information to bidders and review of bid responses to determine cost and scope.
• Participate in award of all subcontracts on assigned projects.

Do you have what it takes?

• Bachelor’s degree in construction management or business; 3+ years’ experience in the field of estimating in the construction industry.
• Ability to deal with situations involving sensitive and confidential company issues.
• Strong written and oral communication skills; ability to communicate with all levels, both internally and externally.
• Knowledge of budgeting and expense control.
• Well-developed analytical and problem-solving abilities.
• Able to write reports, business correspondence.
• Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines.
• Able to perform duties independently.
• Computer skills: Microsoft Office applications or similar programs.
• Strong attention to detail.

Why IC?

• Weekly Competitive Pay!
• Excellent Benefits:
• Medical
• Dental
• Vision
• FSA & HSA
• Life Insurance + Optional Family Life Insurance
• Short-term and Long-term Disability
• Wellness Incentive Program
• Paid Holidays and PTO
• 401(k) + Company match
• Paid corporate training program
• Tuition Reimbursement
• Stability and a variety of different roles that provide a path to career advancement
• Family-owned and operated since 1956

This job description is not intended to be a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of Independence Construction. Since no job description can detail all the duties and responsibilities that may be required from time to time in the performance of a job, duties and responsibilities that may be inherent in a job, reasonably required for its performance, or required due to the changing nature of the job shall also be considered part of the jobholder’s responsibility.

Independence Construction, Inc. is an Equal Opportunity Employer and we value workplace diversity and do not discriminate against any employee or applicant because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

With concrete restoration at the core of its business, LRT has become a leader in the application of the latest technologies, materials, and installation methods for the repair and preservation of concrete and masonry. LRT was established in 1979 and has flourished in its ability to restore, protect, and preserve the structures its customers use to live, work, and play. As a leader in the industry, we achieve excellence with best-practiced individuals, integrity, and guided by our values of PEOPLE. HONOR, and GRIT.

As a Construction Estimator, you will be at the forefront of our project development process. Your meticulous attention to detail and thorough understanding of commercial construction practices will be instrumental in accurately assessing project costs, facilitating successful bidding processes, and ultimately contributing to the profitability and success of our projects. You will collaborate closely with project managers, subcontractors, and vendors to ensure comprehensive pricing coverage and adherence to project requirements. Additionally, you will have the opportunity to leverage your technical expertise and innovative thinking to enhance our estimating procedures and optimize project outcomes.

Key Responsibilities

• Prior to beginning work become familiar with and review all bidding requirements in addition to the project documents.
• Review project type and requirements and select subcontractors and material suppliers from the master bidders’ lists that are appropriate for the project. Send out bid invitations via the latest bid invitation software and update the bidders’ list as required. Contact key subcontractors and vendors early in the process to ensure pricing coverage.
• Attend pre-bid meetings as required. Survey the situation to determine competition on the project. Review site logistics and access while on site.
• Prepare “take off” and check for completeness. Coordinate with 3rd party quantity take-off consultants when so utilized.
• Prepare pricing for all self-preformed work and adjust standard productivity in accordance with job requirements.
• Prepare estimate summary sheets, subcontractor/vendor comparisons, and bid sheets.
• Communicate with designers on contract document items not clearly shown on the bid documents. Document using RFI’s (Request for Information).

Qualifications

• 5-10 years of job experience in commercial construction highly preferred.
• BS degree in Construction Management or Engineering.
• Thorough understanding of industry practices and standards.
• Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam).
• Highly collaborative work style with excellent communication skills.
• Innate Technical and Mechanical Aptitude.

Benefits And Perks

• An employer and team that will invest in you; beyond just great benefits, we will listen and accommodate your needs to the best of our ability.
• A company that is growing with excellent job stability.
• Career advancement with paid training and certification opportunities.
• 401K with generous match.
• Health/Dental/Vision benefits.
• Paid Time Off
• Bring a friend, or two, with an uncapped referral bonus program.
• Company Paid Life insurance.
• And more!

LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Ready to take the next step in your career? Apply today and become a valued member of our team!

Generative AI Engineer/Agentic Engineer

You bring AI to life - one agent at a time. At BWE, we rely on you to build smart, adaptive systems that act on behalf of our teams, streamlining workflows and amplifying impact. As an Agentic Engineer, you turn complex business tasks into intelligent, automated solutions that drive efficiency across the enterprise. Your work helps us scale AI with confidence, creativity, and control.

Responsibilities:

• Design, build, and optimize autonomous or semi-autonomous AI workflows (agentic systems) using Microsoft Copilot, Power Automate, Copilot Studio, and third-party AI platforms.
• Translate complex business tasks into orchestrated, multi-step AI workflows that can act with minimal user input while maintaining accuracy and compliance standards.
• Develop and iterate intelligent assistants, copilots, and AI agents to automate business processes across origination, closing, servicing, and corporate functions.
• Collaborate with Business Partners and business units to test, refine, and scale agentic tools that drive measurable efficiency improvements and user adoption.
• Lead implementation of BWE's Scale Agentic AI initiative by identifying high-impact automation opportunities and deploying production-ready AI agents.
• Partner with AIOps Engineer to ensure agentic systems integrate properly with monitoring, governance, and optimization frameworks.
• Stay ahead of emerging agentic design patterns, orchestration technologies, and best practices while bringing forward innovative solutions to business challenges.
• Create reusable agentic templates and workflow patterns that enable citizen developers to build AI-powered automation within governance frameworks.
• Implement security and compliance controls for agentic systems ensuring adherence to financial services regulations and data privacy requirements.
• Research and experiment with innovative agentic AI technologies and platforms to enhance BWE's automation capabilities.
• Provide training and support to business users adopting agentic tools and automation workflows.
• Document agentic system architectures, decision logic, and operational procedures for knowledge transfer and maintenance.

Near-Term Deliverables:

• Build and deploy at least 3-5 production agentic systems that demonstrate significant business impact and operational efficiency gains.
• Establish agentic AI development framework including design patterns, testing methodologies, and deployment standards.
• Create a comprehensive library of reusable agentic components and workflow templates that accelerate automation deployment across business functions.
• Partner with Business Partners to identify and prioritize high-impact opportunities for agentic AI implementation with detailed business case analysis.
• Develop agentic system monitoring and optimization practices ensuring reliable performance, accuracy, and cost efficiency.
• Research and recommend emerging agentic AI platforms and technologies for potential adoption with hands-on evaluation and implementation guidance.
• Create citizen developer enablement materials including agentic workflow templates, training resources, and best practice guidelines.
• Establish agentic AI governance practices including approval workflows, risk assessment, and compliance validation procedures.
• Complete advanced training in agentic AI, workflow orchestration, or emerging automation technologies relevant to enterprise applications.
• Contribute to BWE's competitive advantage by pioneering innovative agentic use cases and automation strategies.

Minimum Qualifications:

• 5+ years of experience building AI-driven workflows, intelligent automation, or low-code/no-code solutions in enterprise environments.
• Hands-on experience with Microsoft Power Platform (Power Automate, Power Apps), Microsoft Copilot Studio, and Large Language Model (LLM) integration.
• Strong grasp of prompt engineering, conversation design, logic flows, and business process optimization techniques.
• Experience with API integration, data transformation, and system connectivity for workflow automation.
• Knowledge of agentic AI concepts including multi-step reasoning, tool usage, and autonomous decision-making systems.
• Understanding of business process design, user experience principles, and change management for automation adoption.
• Bachelor's degree in Computer Science, Engineering, Business Technology, or related field, or equivalent work experience.
• Creative, fast-moving builder with prototyping mindset and deep understanding of user needs and business workflows.

Preferred Qualifications:

• Experience with advanced agentic AI platforms and orchestration tools beyond Microsoft ecosystem.
• Knowledge of machine learning, natural language processing, and conversational AI development.
• Familiarity with enterprise integration patterns, API management, and cloud-native application development.
• Experience in CRE, financial services, or regulated industries with complex compliance and audit requirements.
• Understanding of AI governance, responsible AI deployment, and risk management for autonomous systems.
• Previous experience leading automation initiatives or digital transformation projects.
• Knowledge of emerging technologies including multi-modal AI, autonomous agents, and AI orchestration platforms.

We are looking for an Outside Sales Representative to grow our business.

Responsibilities:

• Take charge of prospecting for bid opportunities in the sales territory.
• Develop relationships with general contractors, subcontractors, developers, mechanical contractors, manufacturing facilities, architects, and government agencies that produce opportunities to bid for and win work.
• Use Salesforce software to identify opportunities to bid for upcoming work; use Salesforce software to accurately document ongoing efforts to bid and win work. Review and qualify leads coming in from Construct Connect and tag them into Salesforce as appropriate.
• Communicate to customers and potential customers how our products can meet their specified needs – and how our products can meet foreseeable needs the customer may not yet have identified.
• “Walk” job sites to gather information necessary to prepare price quotes.
• Working with the sales managers and the construction managers, assemble equipment & material lists, estimate man hours, identify drug testing and orientation requirements, and determine freight requirements for delivery/return; and assemble that information to create price quotes for submittal to customers.
• Working with the branch contracts manager, usher new contracts through the Client contracting process.
• Working with the project controls team, ensure billing is rapid and accurate and that change orders for extra work are captured promptly for billing.
• Be on hand at job sites as new jobs get underway so that construction crews have clear direction.
• Working with The Client prequalification team, get The Client prequalified with new customers and get us on bidder lists for upcoming work.
• Report activity weekly to the regional and branch sales managers.

Qualifications:

• Prior experience in scaffold and work access sales, particularly contracts involving labor.
• Prior experience cost estimating scaffold and work access projects.
• Prior experience with Salesforce in a construction configuration.
• Prior construction industry experience.
• An engineering, drafting, or construction estimating background.
• Intermediate or better capability with Microsoft Excel.
• Direct hands-on experience as a scaffold builder or foreman.
• Membership in Maine and New Hampshire area construction industry associations.
• Existing customer relationships in Maine & New Hampshire area.
• Bachelor’s degree in Business, Civil Engineering, Sales, Marketing, Construction Management or a related field preferred.

Please reach out to , should you wish to call me directly to apply for this role.

Technical Manufacturing Account Executive

An emerging leader in industrial AI solutions is transforming how manufacturing teams leverage real-time insights from their production floors. They are actively seeking a driven and tech-savvy Technical Manufacturing Account Executive to lead complex sales cycles in high-tech environments. This opportunity offers the chance to work with cutting-edge Vision AI platforms used to improve operational efficiency, product quality, and safety standards in industrial settings.

This role is ideal for someone passionate about innovation in manufacturing and confident in leading technical conversations without the support of a Sales Engineer. You’ll serve as a trusted advisor to operations, quality, and plant management teams as they digitize their facilities.

About the Role:

• Own and manage full sales cycles from outreach and discovery to demo, negotiation, and close.
• Conduct in-depth discovery with plant-level stakeholders including quality, operations, and engineering teams.
• Deliver impactful demos of an AI-based vision platform that’s improving factory floor visibility.
• Translate technical capabilities into measurable business outcomes and operational improvements.
• Navigate complex, multi-site buying groups in industrial environments.
• Maintain and build a strong, predictable sales pipeline through consultative selling and pipeline hygiene.
• Travel as needed to client manufacturing sites across the U.S. and Canada.

About You:

• 5+ years of experience in quota-carrying B2B sales roles, ideally involving technical or consultative selling.
• Experience working with manufacturing clients or within industrial verticals.
• Strong understanding of how to articulate technical solutions in business terms without relying on a Sales Engineer.
• Skilled at building trust and credibility with technical audiences and decision-makers.
• Proven success leading complex deal cycles and meeting/exceeding sales quotas.

Bonus Experience:

• Familiarity with AI, computer vision, factory automation, or edge computing.
• Experience selling without dedicated presales or technical support.
• Technical education, hands-on engineering experience, or prior exposure to industrial software systems.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Senior Construction Project Manager | Location: Columbus, OH (hybrid) | Relocation provided

The Senior Construction Project Manager will lead complex commercial construction projects from preconstruction through final closeout. This senior-level role is responsible for overseeing estimating, bid finalization, and preconstruction planning, and will continue to lead awarded projects through full execution and delivery. This position expands upon and supersedes the traditional Senior Estimator function, providing complete lifecycle project leadership.

Key Responsibilities:

• Lead multiple large-scale commercial construction projects through all phases of the project lifecycle
• Finalize preconstruction planning, estimating, and bid negotiations
• Develop and manage project budgets, cost forecasts, and financial reporting
• Prepare and maintain detailed project schedules to ensure milestone compliance
• Oversee subcontractor procurement, contract administration, and negotiations
• Serve as the primary liaison with owners, architects, engineers, and regulatory agencies
• Ensure adherence to safety standards, quality control measures, and applicable codes
• Review and approve RFIs, submittals, change orders, and pay applications
• Identify risks and implement proactive mitigation strategies
• Mentor and supervise Project Managers and project support staff

Qualifications:

• Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience)
• 10+ years of progressive commercial construction project management experience
• Demonstrated success managing complex commercial projects $3M+
• Strong knowledge of construction contracts, scheduling, cost control, and risk management
• Proficiency with construction management software (Procore preferred; experience with Primavera P6, MS Project, and Bluebeam a plus)
• Valid driver’s license and ability to travel locally to active project sites
• OSHA 30 certification preferred

This position involves work in both a professional office setting and active construction sites.

A full job description will be shared during the interview process.

To apply or learn more, please contact:

Vivi Lamb, Principal

Colin McKenzie Consulting HR

P: 312.859.9175 | E:

Title of Position: Construction Superintendent

Location: Columbus, OH

Industry Leading Benefits: Medical, Prescription, Dental, Vision, 401K, Pension, Short- and Long-Term Disability, Life Insurance, Tuition Reimbursement.

This position requires extensive experience as a Superintendent in commercial/industrial construction. Qualified candidates must demonstrate proficiency and understanding of the management of site logistics, construction operations, contract dispute resolution, and a thorough understanding of the Construction OSHA Standard. Preferred experience with Microsoft Office Programs, MS Project, and or Procure. One must be construction document- and drawing-literate, with knowledge of all phases of construction. Must have experience and proficiency in all divisions of work, methods, materials, scheduling, and cost control. Strong technical and communication skills are critical

Silvi Materials has been expanding our “A” Team of employees since 1947! Our team has grown to 15+ companies, employing over 950 people across 30+ locations in Southeastern Pennsylvania, New Jersey, and North Carolina. Silvi is large enough to provide the stability you need, but small enough that you can feel your individual contribution to our success. We value the fresh ideas and perspectives of each new member of our team.

What does Silvi Materials offer you, you may ask?

• Phenomenal Benefits: Medical, Vision, Dental, Prescription, Vacation, Paid Holidays, and so much more!
• Your future in mind: With 401(k) (at select locations) and/or pension options. We want all employees to build a great retirement!
• Growth at Silvi Materials: We offer each employee the opportunity to move into any facet of our complex business. And our tuition reimbursement program is the perfect springboard to help you get there!

Insert Job Description:

• Plan, direct, and schedule all field staff.
• Responsible for ensuring that projects are turned over as scheduled, thus enabling the company to achieve its production and profit objectives.
• Establish site-specific safety orientation for each project.
• Work with Project Management and Superintendents to resolve site-related issues.
• Monitor projects to ensure they are built per plans and specifications.
• Conduct detailed quality control walks on work completed, advise on corrective measures.
• Work with the Construction Manager to establish new policy, procedures, and employee training requirements.
• Monitor field staff to ensure that all policy and procedures are in place and being utilized.
• Work with HR and the construction manager on new hires and to resolve existing staff issues as needed.
• Provide regular updates to the construction manager.

Qualifications Required:

• 10+ years of solid hands-on experience as a Superintendent with a General Contractor or with a developer on commercial projects.
• 5+ years of experience as a General Superintendent managing other superintendents .
• Degree in Construction Sciences or Engineering preferred but not required.
• Extensive knowledge of state and local Building Codes.
• OSHA 30 certified, 1st Aid/CPR Certificates, Lift Certified (trainer certified a plus).
• Knowledge of Project Management Software, MS Project, Procore, and MS Office.
• One has a valid driver’s license and is willing to undergo an MVR check.
• I am willing to work outdoors, in all weather

Physical Requirements

In a typical work setting, people in this job:

• Lift 20 pounds regularly on occasion.
• Use one or two hands to grasp, move, or assemble objects
• Stand for long periods of time.
• Kneel, stoop, crouch, bend, stretch, twist or crawl.
• Hear sounds and recognize the difference between them.
• See details of objects that are less than a few feet away.
• See differences between colors, shades, and brightness

Silvi Materials does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors.

Job Title: Senior Program Manager - Power Generation

Location: Columbus, OH

Reports To: VP – Commercial Contracts Management

Department: Commercial/ Project Management

Job Type: Full-Time / Salary Exempt

At National Electric Coil (\"NEC\"), we deliver critical components to power plants worldwide. Our projects are large-scale, complex, and mission-critical. Join a team where your leadership drives real impact on global energy infrastructure.

Role Overview:

We are seeking a Senior Program Manager – Power Generation to oversee large EPC projects from contract handover through completion. This role focuses on program-level project management, team coordination, and delivering projects on time, on budget, and in line with contract commitments.

Key Responsibilities:

• Manage the project lifecycle at the program level, guiding individual project managers.
• Coordinate cross-functional teams including Engineering, Manufacturing, QA/QC, and Field Services.
• Build strong relationships with customers, EPC contractors, and internal stakeholders.
• Monitor project KPIs, budgets, and schedules, driving corrective actions as needed.
• Report on project status to senior leadership.

Required Qualifications, Capabilities, And Skills:

• Bachelor's degree in Engineering, Business, Law or related field.

Preferred Qualifications, Capabilities, And Skills:

• Advanced degree (MBA, JD, or other relevant graduate credential)
• Experience working with international customers or EPC frameworks.
• Familiarity with project scheduling tools such as MS Project or Primavera.
• Knowledge of commercial and financial aspects of large-scale projects.
• 7+ years of project management experience, preferably in EPC, energy, or industrial sectors.
• Strong leadership, communication, and problem-solving skills.
• PMP or equivalent project management certification preferred.

Safety and Compliance:

Adhere to safety procedures and PPE requirements in all manufacturing and office environments.

Position Type/Expected Hours of Work:

This is a full-time, salaried (exempt) position. The standard work schedule is a minimum of 40 hours per week; however, hours may vary based on business needs. Occasional evening or weekend work may be required to support urgent matters.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this role. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions.

While performing essential job duties, the employee is regularly exposed to:

• Typical manufacturing and office environment requiring occasional exposure to noise, machinery, and possible PPE use (e.g., safety glasses, gloves, steel-toed boots).
• Frequent use of computers, and standard office equipment.
• The noise level is usually moderate but may vary depending on the work area or activity.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to sit; talk or hear; and use hands to handle, or touch objects or controls. The employee is regularly required to stand and walk. On occasion, the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Other Duties:

Please note that this job description is not intended to cover or contain a comprehensive list of all activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs evolve. This position may require occasional travel to vendor or customer sites for support, as needed.

Equal Opportunity Employer Statement: We are an Equal Opportunity Employer and value diversity. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

About the Company

Minetek is a global industry leader in providing innovative and cost-effective air, water, sound, and power solutions for the mining, oil & gas, and industrial sectors.

With over 150 years of combined experience, Minetek has successfully delivered more than 2,800 projects across 60+ countries. The company specialises in the engineering, design, manufacture, and implementation of both conventional and advanced solutions.

About the Role:

We are seeking a dynamic and technically adept Project Manager to lead large-scale industrial machinery projects for our clients across the US. In this role, you will oversee the end-to-end delivery of complex engineering initiatives, driving cross-functional teams with strategic direction, technical guidance, and decisive leadership to ensure projects are completed on time, within budget, and to the highest quality and safety standards.

Key Responsibilities (include but are not limited to):

• Lead the planning, execution, and delivery of complex industrial machinery projects, ensuring alignment with client requirements and business objectives.
• Provide technical oversight and strategic guidance to cross-functional teams, fostering collaboration and driving operational excellence.
• Develop and manage project budgets, schedules, and resource allocation while identifying and mitigating risks proactively.
• Serve as the primary point of contact for clients and stakeholders, maintaining strong relationships and ensuring exceptional service delivery.
• Drive continuous improvement in project execution by analyzing performance metrics, identifying bottlenecks, and implementing best practices.
• Ensure compliance with industry standards, safety regulations, and quality assurance processes while championing a culture of safety and accountability

About You:

• Bachelor's degree in Mechanical, Electrical, Industrial Engineering, or a related field; relevant professional certifications are highly desirable.
• Proven experience managing large-scale industrial machinery or mining projects, with multi-site exposure in the US.
• Strong technical expertise in industrial machinery, engineering principles, and full project lifecycle management.
• Exceptional leadership and stakeholder management skills, with the ability to drive cross-functional teams and foster collaboration in high-pressure environments.
• Demonstrated commercial and strategic acumen, including budget oversight, risk mitigation, and delivering results that align with client expectations and organizational objectives.

Culture and Benefits

Minetek is an organisation built on strong company values, committed to the personal and professional development of its employees. We foster a work environment that encourages open communication and collaboration while continuously evolving a culture that supports long-term employee engagement.

We offer a competitive salary package along with excellent company benefits. In recognition of outstanding performance, you will also have access to career development opportunities and strong team support.

Columbus, OH- hybrid

12-months with potential for longer term extension or permanent hire

Job Description:

This hybrid role will serve as the Software Engineer to development of microservices and integrations into the new deposit product platform. You will be part of a team of engineers to ensure scalable, secure and performing solutions in a x-matrix environment while confirming all regulatory requirements are met.

Top Required Skills:

• 5+ years in Java-based development ability deliver on technical requirements and produce scalable solutions.
• Technical expertise with Java, Spring Boot, building microservices, API development (Apigee), CI/CD pipelines (Jenkins, Git Actions), Containerization (Open Shift), Streaming data (Kafka), Gen AI (CoPilot, Python, Prompt Engineering), developing ETL processes.
• Proven experience in development work to build integration solution with microservices and APIs within agile environment.
• Familiarity with large-scale transformation efforts or similar modular banking platforms.
• Support CI/CD pipelines along with automation to support productivity.

Nice-to-have:

• Domain experience with consumer deposit products and pricing beneficial.
• Background with additional tech tools that include Flink and Redpanda.
• Banking experience preferred but not required.
• Should have experience working in highly regulated industry with large focus on risk/compliance requirements within SDLC.

Top Responsibilities:

• Develop integration and microservice solutions using tech stack that includes Java, Spring Boot, Kafka, Apigee (API), Git Actions, Splunk and Open Shift.
• Promote automation and leveraging of Gen AI tools for productivity - CoPilot, Python, Prompt Engineering.
• Write integration and unit tests using TDD/BDD while enforcing code quality, and DevOps practices.