Engineering Jobs in Columbus Burlington County, NJ

Job Title : Oceanography Category / Component: Officer • Both Overview Oceanography (OCEANO) Officers, also called METOC, are the Navy's geophysical experts who understand and apply all facets of meteorology, oceanography, hydrography, bathymetry, geophysics, and precise time and astrometry.

Their mission is to define and apply the physical environment, from the bottom of the ocean to the stars, to ensure the U.S.

Navy has the freedom of action to deter aggression, maintain freedom of the seas, and win wars.

Key Responsibilities Provide timely and relevant support to fleet and joint operations by leading the collection, processing, prediction, exploitation, and dissemination of environmental data.

Ensure safety of navigation, access to denied waters, freedom to maneuver at will, and increase the lethality of Navy forces.

Lead teams ranging from small 3-4 person deployable units to large commands of over 400 personnel.

Serve as the one-of-one geophysical expert at an operational command.

What to Expect Serve in a variety of challenging operational billets with increasing scope and responsibility, both at sea and ashore.

The career path interweaves sea, shore, and educational tours.

Sea duty may include leading small team detachments on U.S.

and foreign vessels, serving as the embarked OCEANO Officer on an aircraft carrier or amphibious ship, or serving on a Strike Group or Joint Task Force staff.

Shore tours include assignments at major production commands, forecast centers, headquarters, Joint commands, the Navy Data Center, and Naval Research Labs.

Work Environment Assignments are worldwide, including Europe, Hawaii, Asia, and the Middle East.

Work environments range from being at sea on surface combatants, survey vessels, aircraft carriers, and amphibious ships to being ashore at major production commands, forecast centers, headquarters, and research facilities.

Pathways, Training & Advancement Initial training includes the 3-week Information Warfare Basic Course (IWBC) and the 7-week Basic Oceanography Accession Training (BOAT).

Officers may also attend Division Officer Leadership Course (DIVOLC).

Postgraduate education at the Naval Postgraduate School is required for officers at the LCDR level and senior, typically as mid-grade Lieutenants.

Promotions to LTJG and LT occur at 2 and 4 years of service, with competitive promotion opportunities to LCDR, CDR, CAPT, and Flag Officer ranks.

Requires a Baccalaureate degree, preferably in a technical field, with a cumulative GPA of 2.8 or greater.

Must have completed a full college calculus series (I and II) with a minimum 'C' average, and a college-level calculus-based physics series (I and II) with a minimum 'B' average.

A desired degree is in physics, physics-based oceanography, meteorology, hydrography, earth science, engineering, or mathematics.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy as an Officer, including United States citizenship A bachelor's or qualifying professional degree Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores on the Officer Aptitude Rating exam Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Must be qualified for sea duty, world-wide assignable, and eligible for a Top-Secret security clearance.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

To maintain the company’s forklifts consisting of diesel, propane and electric. Maintain equipment such as rollbacks, box trucks, trailers and other lightweight vehicles. Also maintain shop machinery and equipment.

Job Summary:

This position reports to the Equipment Maintenance Manager. It requires a blend of skills and experience that are specifically focused on fork truck, vehicle, and production equipment maintenance. Also responsible for managing maintenance on shop machinery and equipment. Mechanics are expected to furnish their basic tools like wrenches, pliers, sockets, screwdrivers, etc. Sea Box will provide larger, specialized equipment that requires a significant investment and may not be practical for individual ownership.

Responsibilities:

• Accident prevention – actively identify, correct and/or report safety hazards to prevent accidents

• Actively identify and pursue cost reduction and efficiency/profit improvement opportunities.

• Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product.

• Maintain Doosan and Hyster fork trucks, including preventative maintenance.

• Maintain air compressors, including preventative maintenance.

• Repair and maintain paint pumps, rivet guns and shop equipment.

• Work collaboratively with shop personnel to maintain building and equipment items.

• Lifting production objects of up to 50lbs.

• Performs other duties as assigned.

• Must be able to fulfill essential job function in a consistent state of alertness and safe manner.

Why work for Sea Box?

We offer benefits to our full-time employees that include:

· Health Insurance

· Dental Insurance

· Vision Insurance

· Basic and Voluntary Life

· Long-Term Disability

· Flexible Spending Accounts

· Employee Assistance Program

· Paid Time Off

· Paid Holidays, Bereavement, Jury Duty

· 401(k) with company match

· Employee Referral Program

Employees are eligible for most benefits on the 1st of the month following date of hire.

Hourly Rate Range: $32.00/hr. - $45.00/hr.

Skills/Qualifications: Diesel/fork truck mechanic training. Maintenance savvy.

Experience: 5 years of diesel engine maintenance experience or related fork truck or truck maintenance experience.

PI162f0001a5bc-38

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Mechanical Design Engineer

$80,000 - $110,000 + Quarterly Bonuses + Progression to Management + PTO + Holiday + Medical + Dental + Vision + Life Insurance + 401K + Other Excellent Benefits.

Langhorne, Pennsylvania (Commutable from Philadelphia, Doylestown, Newton, Hatboro, Levittown, Morrisville, Bristol, Cherry Hill, Princeton, Trenton).

Are you a Mechanical Design Engineer from an Industrial Manufacturing background, ready to take the next step into a high-impact technical leadership role, where you'll have the autonomy to fully own and drive the mechanical design process?

This is a standout opportunity to establish yourself as the go-to expert for mechanical design, with clear progression into management or senior leadership, in addition to competitive quarterly bonuses and comprehensive training on machinery unique to the business.

Now is the time to join this industry leading organization, at a cutting edge, state-of-the-art manufacturing facility. Renowned for their quality, innovation, and employee development, you'll play an integral part in continuing their legacy as a market leader, whilst growing your own horizons both personally and professionally.

In this role, your expertise will be instrumental in the design and optimisation of mechanical powertrain systems and components. You will take ownership of designing fabricated weldments and precision-machinery, whilst applying FEA to assess structural, thermal, and vibration performance. You'll work closely alongside engineers, vendors, and cross-functional teams, to produce manufacturing drawings, support component selection, and deliver solutions that meet performance, reliability and manufacturability targets.

This role would suit a Mechanical Design Engineer with Industrial Manufacturing experience, looking to step-into a high-impact technical leadership role with extensive growth potential and progression towards senior leadership.

The Role:

• Design and optimise large-scale industrial equipment and mechanical powertrain components.
• Perform mechanical system analysis (including FEA) and produce detailed manufacturing drawings.
• Collaborate with engineers, project teams, and vendors to specify components and ensure designs meet manufacturing requirements.

The Candidate:

• Strong mechanical design background with proficiency in 3D CAD (Autodesk Inventor preferred) and Finite Element Analysis.
• Solid understanding of mechanical systems (including pneumatics), ideally with experience in industrial equipment, automation, or robotics.
• Degree qualified (Bachelors).

To apply for this role or to be considered for further roles, please click \"Apply Now\" or contact Oliver George at Rise Technical Recruitment.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

Mechanical Design Engineer, Mechanical Engineer, Design Engineer, Mechanical Design, Design, Mechanics, FEA, Finite Element Analysis, Weldments, Precision Machining, Mechanical Powertrains, Mechanical Components, Autodesk, SolidWorks, CAD, 3D CAD, Engineering, Langhorne, Pennsylvania.