Engineering Jobs in Berlin, CT

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now

FUNCTION:

In an assigned area or cell, under general supervision perform complex polishing and finishing operations of exacting tolerance on production or overhaul and repair parts. Parts are typically at or near final stages of the manufacturing process, with tight tolerance limits, requiring intense period of concentration for extended periods of time.

TYPICAL DUTIES:

• 
  
• Work from drawings, sketches, computer-generated information and verbal instructions to plan the polishing, finishing or re-work operation to be performed.
  

• 
  
• Must be capable of following standard finishing applications in order to achieve dimensional integrity and required finish characteristics.
  

• 
  
• Must have comprehensive understanding of the material characteristics being worked on in order to determine the appropriate wheel, grit, compound or abrasive texture to use in order to achieve desired finish and dimension.
  

• 
  
• Perform precise chamfering operations on parts, without damaging other critical part dimensions
  

• 
  
• Work from quality review and corrective work documents to repair or rework parts.
  

• 
  
• Use precision measuring instruments in order to gage various critical dimension and tolerance limits, in accordance with established parameters or blue print requirements.
  

• 
  
• Performs temporary part marking and In process transfer marking operations using Vibro Engraving, Electro-chemical Etch, or Ink Stamp, methods with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• Refer difficulties to leader or supervisor as appropriate.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

Job Title: Product Manager (Beazley Digital - API/Services)

Division: Beazley Digital

Reports To: As per Beazley's organisation chart

Key Relationships:

Head of Digital Underwriting, Head of Digital Operations

Within Beazley:CIO, other senior IT Leads, Head of PMO/VRF, Enterprise Architect, Other Product/Project Managers, Commercial Management, Information Security, External Suppliers

Job Summary:

The product manager is accountable for the technology roadmap, design, development, enhancement, delivery, and budgeting for the digital product /technologies they lead. Ensuring technology is aligned to business value, OKRs and target architecture. The role ensures the technology is developed and maintained using sound business and technology management practices and it supports business transformation by enabling new capabilities and growth. Using agile and product management methods to ensure you are "delivering the right thing" in "the right way".

Key Responsibilities:

End-to-end Delivery & Execution

• Own end-to-end delivery of product/technology initiatives, ensuring alignment from discovery through deployment and ongoing optimisation.

• Define clear delivery outcomes, success measures and release plans in partnership with Product, Change, Engineering and business stakeholders.

• Lead prioritisation and execution across the delivery lifecycle, balancing strategic objectives with operational needs.

• Ensure teams remove blockers, maintain delivery momentum and operate with high transparency on progress, risks and dependencies.

• Champion agile ways of working, continuous delivery and automation to accelerate time to value.

• Oversee quality assurance, testing and release management to ensure secure, high-quality, production ready outputs.

• Drive postlaunch monitoring, analytics and continuous improvement to maximise product value and performance.

Strategy and Business Management

• Develop and maintain a strategic product roadmap aligned to OKRs and business plans.

• Partner with the business owner and key users to assess current and future needs and shape multiyear plans.

• Continuously refine governance and decision-making processes across run, grow and transform activity.

• Build, develop and retain a high performing technology delivery team.

• Work with digital leadership to define cost and resourcing models and support effective demand planning.

Budget Management

• Collaborates with the digital leadership team and business owner to make funding and resource reallocation decisions.

• Manages the product budget including run, growth and transform, makes informed and dynamic investment prioritization decisions supported by data.

Technology Management

• Work with Group Technology, Information Security, Data Management and Architecture teams to align and leverage enterprise architecture.

• Oversee day-to-day technology operations and drive continuous improvement in performance, security, availability and usability.

• Define and track channel KPIs to improve adoption, performance and user experience.

• Coordinate with other product managers to avoid duplication and manage interdependencies.

• Manage vendor relationships in line with group frameworks and build strategic partnerships aligned to Beazley Digital's OKRs.

• Embed industry standards and practices such as Agile, DevOps, InfoSec and modern data architecture to ensure resilience and agility.

Digital Transformation

• Act as the technology contact for the product, partnering with cross functional teams to evolve processes and operating models.

• Scale innovation and new insurance propositions into the channel where feasible.

• Recommend business process, commercial and UX improvements to enhance adoption.

• Apply design thinking, customer journey mapping and data insights to drive end-to-end channel value.

• Identify and champion emerging business and technology trends that support channel OKRs.

• Contribute to embedding digital opportunities into Beazley Digital's strategy to drive growth, efficiency and risk reduction.

General:

It is important that within all your interactions both internally and externally you adhere Beazley's core values - Being Bold, Striving for Better, and Doing the Right Thing as they contribute to an internal environment of teamwork and promote a positive brand image and experience to our external customers. We also expect Beazley employees to:

• Comply with Beazley procedures, policies and regulations including the code of conduct which incorporates the PRA and FCA Conduct.

• Undertake training on Beazley policies and procedures as delivered by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) either directly, via e-learning or the learning management system.

• Display business ethics that uphold the interests of all our customers.

• Ensure all interactions with customers are focused on delivering a fair outcome, including having the right products for their needs.

• Comply with any specific responsibilities necessary for your role as outlined by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) and ensure you keep up to date with developments in these areas. This may include, amongst others, Beazley's underwriting control standards, Beazley's claims control standards, other Beazley standards and customer relationship management.

• Carry out additional responsibilities as individually notified, either through your objectives or through the learning management system. These may include membership of any Beazley committees or working groups.

Personal Specification:

Education and Qualifications

• Product Management or Product Owner certification desirable but not essential

• Agile certification desirable but not essential

Skills and Abilities

• Strong business understanding and ability to work in partnership with the business

• Strong Technology Product Management skills and/or Programme Management skills

• Demonstrated ability to manage technology and business change projects with demonstrated delivery of business value and pursuit of quality

• Experienced in change management, able to understand and advise on how to implement process, technology and people changes while minimising the delivery risks

• Understanding of business strategy and the work of the teams within the customer organisation

• Able to identify and help the team assess options and solutions that best fit business requirements

• Proven team management and leadership capability within a change and technology context

Knowledge and Experience

• Previous experience in technology

• Previous experience in budget management

• Previous experience of delivering multiple, complex IT projects, preferably covering the use of internal resources, third party (packaged) solutions and outsourced services

• Previous experience of the use of various analysis and delivery frameworks covering scope definition, planning, budgeting, reporting, management of risks and issues

• Previous experience working with an Agile methodology preferred

• Previous experience building and maintaining effective working relationships

• Previous experience managing an outsourced team

Aptitude and Disposition

• Delivery focussed, self-motivated, flexible and enthusiastic

• Relentless curiosity

• Learning Agility

• Open Disposition

• Judgement

• Digital Acumen

• Customer focus

• Strategic thinking

Competencies

• Proactive

• Information seeking

• Flexible

• Detail oriented

• Purposeful communication

• Leadership

• Team working

• Negotiation and influencing

• Problem solving

• Customer focus

• Decision making

Who We Are:

Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.

Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.

Our Culture

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world.Employee's diversity,experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.

• Be bold

• Strive for better

• Do the right thing

Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.

We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success. Explore a variety of networks to assist with professional and/or personal development.

Our Employee Networks include:

• Beazley RACE - Including, understanding and celebrating People of Colour

• Beazley SHE - Successful, High potential, Empowered women in insurance

• Beazley Proud - Our global LGBTQ+ community

• Beazley Wellbeing - Supporting employees with their mental wellbeing

• Beazley Families - Supporting families and parents-to-be

We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:

• Internal Pathways (helping you grow into an underwriting role)

• iLearn (our own learning & development platform)

• LinkedIn Learning

• Mentorship program

• External qualification sponsorship

• Continuing education and tuition reimbursement

• Secondment assignments

The Rewards

• The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization

• Attractive base compensation and discretionary performance related bonus

• Competitively priced medical, dental and vision insurance

• Company paid life, and short- and long-term disability insurance

• 401(k) plan with 5% company match and immediate vesting

• 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs

• Up to $700 reimbursement for home office setup

• Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance

• Up to 26 weeks of fully paid parental leave

• Up to 2.5 days paid annually for volunteering at a charity of your choice

• Flexible working policy, trusting our employees to do what works best for them and their teams

Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $85,000 - $107,000 per year plus discretionary annual bonus.

Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.

Division Manager – Progressive Stamping Manufacturing

Position Overview

We are seeking an experienced Division Manager with a strong background in Progressive Stamping and Progressive Dies to lead operations, drive profitability, and support strategic growth initiatives. This role carries full P&L responsibility and oversees production, quality, delivery, and operational performance.

This is a leadership opportunity for a manufacturing professional with proven experience in Lean Manufacturing, operations management, and team leadership.

Key Responsibilities

• Lead and develop divisional staff to ensure performance, safety, and professional growth
• Oversee full divisional Profit & Loss (P&L) responsibility
• Drive performance in quality, on-time delivery, inventory turns, cost control, and profitability
• Communicate company strategy and operational targets across teams
• Manage hiring, performance evaluations, compensation changes, and workforce planning
• Lead capital planning and operational budgeting
• Implement and drive Lean Manufacturing initiatives to improve quality, cost, and delivery
• Partner cross-functionally with Customer Service, Estimating, Production Control, and Finance
• Support profitable sales and marketing programs through operational excellence

Required Qualifications

• Direct experience with Progressive Stamping and Progressive Dies (required)
• Strong background in manufacturing leadership / plant management / operations management
• Demonstrated success managing teams in a production environment
• Experience with Lean Manufacturing, continuous improvement, and process optimization
• Proven ability to recruit, train, and develop high-performing teams
• Strong project management and prioritization skills
• Analytical and data-driven decision-making ability
• Bachelor’s degree in Engineering, Business, or related field preferred (or equivalent experience)
• Results-driven with strong business acumen
• Ability to balance operational efficiency with long-term growth initiatives

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift.

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need fora Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite.Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms