Engineering Jobs in Baytown Tx Remote

Project Director (EPC)

Hydrogen Refueling Facility

Work Location: Baytown, TX

Estimated Start Date: 5/4/2026

Estimated Duration of Work Assignment: Long Term (initially one year with annual extensions anticipated)

Hours: 50 hours/week (5x10s schedule)

Pay Rate: Not Defined / need Candidate's requested rate

PD: $178/day

Mob/ Demob: $500/each way

Position Details: The role of the Project Director (EPC) will be involved in overseeing the execution of a Hydrogen refueling facility, ensuring project delivery, profit and loss accountability, and customer satisfaction. The project is estimated to be $2-4 billion. Extensive experience directing large-scale EPC projects in energy/chemicals (hydrogen, syngas, LNG, refining, or renewables preferred); proven P&L responsibility for $500M+ projects; strong leadership in high-hazard process industries.

Key Responsibilities: Provide overall leadership and single-point accountability for all EPC phases (engineering, procurement, construction, commissioning, and startup). Drive achievement of project goals: scope, schedule, cost, quality, safety, and environmental compliance. Manage and integrate multi-disciplinary teams, major subcontractors, vendors, and key stakeholders (owner, licensors, regulators). Oversee risk management and change control, mitigating project risks to avoid delays and cost overruns. Ensure compliance with industry codes, safety standards, and project-specific requirements. Report directly to senior executive leadership and represent the project to clients/investors. Ensure compliance with EHS regulations at various project sites.

Education Requirements:

Required: Must have previously been a site manager for a large new build.

Preferred: Individuals who have done ground-up construction. Hydrogen refueling a plus.

Prior LNG, combined cycle builds a plus.

Physical Requirements: The role is leadership-focused, involving significant office time, meetings, and oversight, but also requires regular presence on an active, large-scale construction site. Candidate must have the ability to walk and stand for extended periods over uneven, rough terrain, have the ability to ascend/descend stairs and ladders, be able to tolerate work in varying weather conditions (heat, cold, rain, wind, dust), loud noise, and vibrations. Must be able to lift/carry 50lb, as well as wear appropriate PPE when required. Must maintain sufficient stamina, balance, and agility to navigate the site safely without undue fatigue or risk.

SUMMARY

As a Mechanic (Class B), this position is responsible for repairing and maintaining company-owned equipment. The Mechanic is accountable for diagnosing issues and making necessary adjustments, repairs, or overhauls on various heavy machinery used in heavy civil, railroad, and marine construction.

JOB DUTIES AND RESPONSIBILITIES

• Plan and schedule regular maintenance for industrial machines and equipment. Maintain accurate equipment service records.
• Conduct planned maintenance by examining parts for damage or excessive use, repairing and replacing damaged or worn parts, cleaning, lubricating, assembling, and testing equipment to ensure operational efficiency. May install batteries and windows on specific equipment.
• Diagnose and examine faults or malfunctions in equipment to determine repairs using engine diagnostic equipment such as computerized tests and calibration devices.
• Order materials and supplies needed for repair and maintenance of equipment.
• Test mechanical equipment after repair or assembly to ensure proper performance and compliance with the manufacturer’s specifications, which may include the assembly of gear systems, aligning frames and gears on heavy equipment, and/or fitting the proper bearings for mobile mechanical, hydraulic, and pneumatic equipment.
• Adjust and maintain industrial machinery using control and regulating devices.
• Perform general facility maintenance and clean-up tasks.
• Perform other related duties as assigned.

REQUIRED QUALIFICATIONS

• Education: Must possess a Transportation Worker Identification Credential (TWIC) or be willing/eligible to obtain one upon hire. Must have a valid driver’s license.
• Experience: Five (5) years of experience maintaining and repairing heavy equipment, hydraulic cranes, and friction cranes.
• Knowledge/Skills/Abilities (KSA): Must possess strong written and verbal communication skills in English to effectively present information and respond to questions from managers, clients, and customers. Must possess the ability to read and understand operating manuals, blueprints, and technical drawings. Proficient in the use of computer diagnostic equipment and software. Must provide tools required to work on cranes and heavy equipment.

PREFERRED QUALIFICATIONS

• Experience: Seven (7) years of experience maintaining and repairing heavy equipment, hydraulic cranes, and friction cranes.
• Knowledge/Skills/Abilities (KSA): General knowledge and skills in marine operations, such as pile driving, welding, crane operations, barges, etc. General knowledge and understanding of basic construction terms and concepts.

WORKING CONDITIONS

• The individual must be able to perform the essential functions of the job with or without reasonable workplace accommodation.
• The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes a hard hat, safety glasses, life vest, respirators, ear plugs, steel-toed shoes, personal floatation devices (PFD), and/or other protective equipment.
• The individual frequently works near moving mechanical parts and must be able to adapt to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration.
• The individual may be required to work long hours and/or weekends. Additionally, some out-of-town or overnight travel may be required.
• The individual may occasionally be required to sit in a vehicle for up to 8 hours.
• The individual may be required to walk, step, climb, or otherwise move from one location on the job site to another, which may be of varying heights and access parameters.
• The individual may occasionally be required to stand, stoop, bend, crouch, kneel, climb, or sit for long periods.
• The individual may be required to work in confined spaces, climb vertical ladders of a height of 6 ft. or greater, and/or elevated heights.
• The individual may be required to lift objects with a minimum of 10 lbs. and a maximum single-person lift of 50 lbs. This could result in frequent lifting or carrying depending on project needs.
• The individual must meet specific vision abilities, such as close vision and color vision.
• The individual may be required to perform repetitive movements by feet, shoulders, arms, wrists, hands, and back in the performance of work.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Employees are authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed as well as bring problems to the attention of the immediate supervisor, HSE Manager, or HR Manager. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Russell Marine, LLC is on an “at-will” basis. There is no contract of employment between Russell Marine, LLC and any one or all of its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by that Russell Marine, LLC Executive.

Russell Marine, LLC is proud to be an equal opportunity employer and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other protected status. If you require special assistance or accommodation while seeking employment with Russell Marine, LLC, please contact Human Resources at

Kelly Science & Clinical is seeking a proactive Quality Assurance Coordinator for a specialty chemical company in Baytown, TX. This role is critical in ensuring compliance with quality regulations (federal, state, and local), improving processes, and implementing effective quality management systems. The ideal candidate will have experience in implementing quality programs, conducting and documenting risk assessments, and possess the initiative to follow through on projects until the desired results are achieved.

Key Responsibilities:

• Develop, implement, and maintain quality management systems
• Ensure compliance with relevant industry standards and regulations
• Conduct regular audits and inspections of raw materials, in-process products, and finished goods
• Monitor and analyze quality performance data, identifying areas for improvement
• Identify safety hazards, support incident investigation, and ensure proper reporting to find root cause analysis and corrective actions
• Collaborate with cross-functional teams to drive continuous improvement initiatives
• Provide training and support on quality procedures and best practices

Qualifications:

• Bachelor’s degree in Chemistry, Chemical Engineering, Quality Management, or related field is preferred
• Proven experience in quality assurance/control within a chemical manufacturing environment
• Knowledge of quality standards and regulations relevant to the chemical industry
• ISO 9001 knowledge / certification
• Strong analytical and problem-solving skills
• Excellent communication and teamwork abilities
• Proficiency in quality management software and MS Office Suite

This is a Direct Hire position with a Monday-Friday day shift work schedule. If you meet the above qualifications, please submit your resume for immediate consideration.

Quality Control Manager

The Company

Heico has a history of success. Since its founding over 40 years ago, The Heico Companies has grown from a single business to over 78 separate companies through a strategic acquisition policy, and by reinvesting its earnings into internal growth and new prospects. Historically talented at restoring distressed companies, Heico strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.

These four core operations are organized into groups: Applied Solutions Group, Construction Solutions Group, Industrial Technologies Group, and Metal Processing Group. Once acquired, new Heico companies are assigned to a group and run on a stand-alone basis, allowing for great independence as well as the opportunity to share knowledge about markets, production processes, and management practices across other Heico groups and companies.

Heico continues to seek out new opportunities and maintain its standard of success. The Heico Companies has remained a privately held company since its creation and maintains a majority ownership in each of its operations, which generates more than $3.3 billion dollars in revenues. Many of our businesses are certified Woman-owned Business Enterprises (WBE).

More information about the overall organization can be found at Strand is part of the Metals Processing Group which produces steel wire and cable/wire-related products that serve many industries and is wholly owned by The Heico Companies, LLC. The independent business model fosters entrepreneurship and growth and allows professional development at all levels.

The Position

The Quality ControlManager will develop, implement, manage and maintain effective Quality and Safety policies and procedures that meet or exceeds the criteria of federal, state, and business requirements.

This role is onsite in Baytown, TX and offers relocation assistance.

Job Details

• Conducts quality assurance audits of National Strand production assuring company standards are maintained and product integrity is preserved.
• Develop and implement best practices to ensure consistency in the quality of the product.
• Be a point of contact for customers when discussing technical specifications or complaints.
• Act as the focal point for all quality-related issues and report to management as needed.
• Schedule and coordinate all internal and external audit activities, address non-conformities, and maintain audit history.
• Provide weekly reports on quality performance and identify areas of improvement.
• Consults with management to resolve quality, production, and efficiency problems.
• Functions as an information source to departments when special and critical quality issues occur.
• Determine overall plant product quality by conducting and evaluating various product tests and tests related to steel wire making and processing.
• Consult with plant management and personnel on better operational procedures to improve overall efficiency and product yields.
• Discuss plant evaluation with plant management, make appropriate recommendations, and set a timetable for improvement and corrections.
• Work with accounting to ensure scrap and reject reporting is accurate and timely.
• Performs other duties as assigned.

Job Requirements

Experience: Minimum 3+ years of experience in a manufacturing environment. ISO 9000 experience preferred or similar.

Education: Bachelor’s degree in engineering or related field from an accredited University. Master’s degree is preferred. Metallurgical knowledge is highly desirable.

Communication: Excellent communication skills, both written and verbal communication. Proven capability to collaborate with non-professional as well as professional stakeholders at all levels. Excellent business communication and leadership; ability to manage multiple demands.

Technology: Strong working knowledge of MS Office and other support software. Knowledge of MS SharePoint is highly desirable.

Position Type and Expected Hours of Work - This is a full-time position. Typical work hours are Monday through Friday, 8:00 AM to 5:00 PM. Occasional evening and weekend work may be required as job duties demand.

Travel - This position might require occasional travel.

Work Environment - The position operates in a professional office environment using standard office equipment such as computers, iPads, phones, copiers, and filing cabinets. The employee is occasionally exposed to fumes or airborne particles, distracting noise levels and moving mechanical parts.

Physical Requirements - The physical demands described here are representative of those that must be met by the QC Manager position to successfully perform the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit and talk or hear.The employee is frequently required to stand and walk. The employee is occasionally required to use hands to finger, handle or feel and reach with hands and arms, lift and/or carry up to 50 pounds, balance, bend, stoop or kneel, climb, push/pull and squat, or crouch.

Disclaimer: This position description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

NTG is seeking a Plant Manager for a chemical company in Crosby, Texas.

Seeking a Plant Manager to lead safe and efficient operations at a chemical manufacturing facility providing toll manufacturing services. This role oversees alkoxylation production, ensures customer requirements are met, and drives safety, quality, and operational excellence.

Responsibilities:

• Lead safety, regulatory compliance, and process safety initiatives.
• Manage daily production, reactor utilization, and plant operations.
• Support customer onboarding, audits, and product scale-ups.
• Develop and lead plant personnel, ensuring training and high performance.
• Drive quality, continuous improvement, and cost efficiency.
• Oversee budgets, capital projects, and operational KPIs.

Qualifications:

• Bachelor’s in Chemical or Mechanical Engineering (or related).
• 8–12+ years in chemical manufacturing, including 3–5 years in operations leadership.
• Hands-on batch chemical processing experience; alkoxylation preferred.
• Strong knowledge of safety, PSM, OSHA, and environmental regulations.
• Proven leadership managing people and complex operations.

Preferred:

• Toll manufacturing experience and customer-focused production.
• Experience with specialty chemical feedstocks and hydrophobes.
• MBA or advanced technical degree is a plus.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms