Engineering Jobs in Aurora Adams County, CO

Job Category: Operations Field

Requisition Number: KELSO018895

Full-Time Nationwide +1 more locations

Primary Job Responsibilities:

• Practice safety rules.
• Follow verbal and written instructions.
• Safe use of hand & power tools.
• Report to and assist immediate supervisor.
• Perform quality work as determined by project specifications.
• Accountable for all tools and materials at the end of your shift.
• Must work well as part of a team.
• Able to perform terminations up to 1500V ac and dc
• Able to read construction drawings and understand construction specifications.
• Have a basic understanding of electrical systems.
• Able to install underground cabling and conduits.
• Able to run basic electrical test equipment.
• Able to work with, train and mentor helpers.
• Must comply with company's drug and alcohol abuse policy.
• Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
• Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
• Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
• Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
• Must be able to stand or walk for long periods of time.
• Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
• Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.

Work Location

• Industrial construction sites and/or fabrication shops.

Mobility Barriers

• Uneven ground
• Obstructed pathways
• Work at low/high elevations
• Confined workspaces

Environmental Conditions

• Predominantly outdoor work
• Exposure to:
  • Extreme heat or cold
  • Humidity, rain, and other weather conditions
  • Loud noise from tools and machinery
  • Potential chemical exposure

Education & Experience Requirements:

• One (1) to four (4) years of experience in specified skill (depending on mechanic level).
• Post-offer drug/alcohol screen and physical evaluation.
• New Hire Orientation Quiz
• Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace.
• Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.).
• Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.).

Company Overview:

Primoris Services Corporation is a premier specialty contractor providing critical infrastructure services to the utility, energy, and renewables markets throughout the United States and Canada. Built on a foundation of trust, we deliver a range of engineering, construction, and maintenance services that power, connect, and enhance society. On projects spanning utility-scale solar, renewables, power delivery, communications, and transportation infrastructure, we offer unmatched value to our clients, a safe and entrepreneurial culture to our employees, and innovation and excellence to our communities.

Benefits:

• 401k w/employer match
• Health/Dental/Vision insurance plans
• Paid time off
• Stock purchase plan

EEO Statement:

We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Agency Statement:

We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR.

Senior Project Manager – Mission Critical

Role Overview

• Senior Project Manager responsible for leading large-scale industrial and mission-critical construction projects.

• Accountable for project performance, profitability, schedule adherence, and client satisfaction across complex builds.

• Projects typically involve electrical infrastructure, systems integration, and manufacturing or industrial environments.

Target Project Experience

• Experience managing projects with $30M–$50M+ total project scope

• 7+ years of experience in industrial, manufacturing, or mission-critical environments (such as data centers, electrical infrastructure, modular builds, or similar complex facilities)

• Familiarity with electrical scope and systems integration

• Experience coordinating cross-functional teams including engineering, field operations, subcontractors, and client stakeholders

Key Success Indicators

Strong candidates should be able to demonstrate experience with:

• Driving cost savings on projects

o Improving efficiencies, reducing waste, or optimizing project scope

• Improving gross margin or project profitability

o Ability to explain how decisions impacted financial performance

• Managing large and complex project scopes

o Leading detailed schedules, subcontractor coordination, and technical delivery

• Client and stakeholder communication

o Navigating complex customer conversations while maintaining strong relationships

Work Location & Schedule

• Location: Aurora, Colorado

• Schedule: Full-time, on-site

• Role requires daily on-site presence to support field coordination, project teams, and operational execution

Compensation

• Base Salary: $125,000 – $165,000 (depending on experience)

• Bonus eligibility

• 
  
• Develop and implement quality control plans and procedures for construction projects.
  

• 
  
• Conduct regular inspections and audits to ensure compliance with quality standards and specifications.
  

• 
  
• Lead and manage quality control by providing guidance and support to ensure effective quality assurance activities.
  

• 
  
• Collaborate with project managers and stakeholders to identify quality issues and implement corrective actions.
  

• 
  
• Prepare and maintain quality documentation, including reports, records, and compliance certifications.
  

• 
  
• Train and mentor team members and other staff on quality control practices and procedures.
  

• 
  
• Stay updated on industry standards, regulations, and best practices related to quality management in construction.
  

• 
  
• Ensuring EM385 and other relevant regulatory or compliance requirements are met.
  

• 
  
• Promoting and maintaining a culture of safety throughout the worksite.
  

• 
  
• Work closely with subcontractors by reviewing high risk activity of work scopes and providing support to ensure teams are informed about safety protocols/procedures specific to project.
  

• 
  
• Verifying all workers are oriented, have proof of training for scope of work, and ensures team members are well-informed about safety protocols and procedures specific to the project.
  

• 
  
• Actively participate in regular Environmental, Health, and Safety inspections, identifying potential hazards/compliance issues and promptly addressing them to mitigate risks.
  

• 
  
• Leads the safety committee, collaborating with other team members to develop and implement effective safety measures.
  

• 
  
• Conducting investigations, gathering relevant data - propose time-bound action items.
  

• 
  
• Maintain and update all safety-related paperwork including hazardous materials, inspections, pre-task plans, and permits.
  

• 
  
• Maintain, update, and practice Emergency Action Plan and call trees to ensure efficiency.
  

• 
  
• Monitor and report on safety performance metrics, identifying trends and areas for improvement.
  

• 
  
• Monitor site general conditions and plan with site team to ensure risks related to items such as walk paths, lighting, access, weather are accounted for.
  

• 
  
• Stay updated on industry standards, regulations, and best practices related to EHS management in construction or related field preferred
  

• 
  
• 10+ years of relevant construction experience (3+ years of QC management)
  

• 
  
• Active CQM cert
  

• 
  
• Well-versed in 3 phases of quality control.
  

• 
  
• Proven experience as a QC Manager on multiple DOD projects exceeding $10M
  

• 
  
• Strong leadership and team management skills.
  

• 
  
• Excellent communication and interpersonal skills.
  

• 
  
• Detail-oriented with strong analytical and problem-solving abilities.
  

• 
  
• Willingness to travel to job site locations at all 5 bases on the island.
  

• 
  
• Must have prior experience with design-build projects and project delivery for serious consideration.
  

• 
  
• Minimum of 5 years of progressive experience with construction safety management.
  

• 
  
• Data center construction experience strongly preferred.
  

• 
  
• SSHO and Construction military project experience is required.
  

• 
  
• 1 to 3 years supervisory experience preferred
  

• 
  
• Working knowledge of U.S Occupational Safety and Health Administration (OSHA) and EM385 regulations and standards and other non-regulatory safety standards applicable to the location.
  

• 
  
• Knowledgeable with NFPA 70E and environmental compliance.
  

• 
  
• Experience conducting incident investigations and reporting processes. Communicate effectively with client safety team regarding incidents and other action items.
  

• 
  
• Experience writing and reviewing JHAs, SOPs, EOPs, MOPS, Hazcom, technical reports and procedures.
  

• 
  
• Excellent written and oral communication skills.
  

• 
  
• Outstanding Customer relations skills.
  

• 
  
• This role and customer contracts require proof of US Citizenship. Ability to obtain security clearance is preferred.
  

• 
  
• Bachelor's degree in: Construction Management, Engineering, Environmental Health and Safety (EHS), Construction Management
  

• 
  
• Knowledge with experience using Microsoft Office
  

• 
  
• BCSP certifications preferred (CSP, CHST, SMS)
  

• 
  
• No supervisory responsibilities for this position.
  

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Position Description

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Denver, Colorado

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $36.98 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule:Thursday – Monday OR Friday – Tuesday
  
  
• Hours: Second Shift 2:30 pm – 11:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

• 
  
• On the Job Paid Training
  
  
• PPE AND UNIFORMS Issued
  
  
• TOOL and BOOT ALLOWANCE provided
  
  
• State of the Art Equipment
  
  
• Safety is Always the First Priority
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 months ago (1/29/2026 5:01 PM)

Requisition ID 2

Location (Posting Location) : State/Province CO

Location (Posting Location) : City DENVER

Location (Posting Location) : Postal Code 80239

Category Technicians/Service Employees4

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $36.98/Hr.

Max Pay USD $36.98/Hr.

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group.

We Make It Work.

Doka USA is looking for a Territory Sales Manager to support our Western Region, responsible for revenue generation, territory growth strategy implementation, sales personnel development, and overall price-quality performance. This leadership role requires a strategic thinker with strong business acumen who can effectively coordinate with cross-functional teams, negotiate favorable terms on behalf of Doka, foster client relationships, and ensure projects are executed to the highest standards. This remote position is based in the Western Region and reports directly to the Western Region Director. This Territory Sales Manager will be overseeing activities in the states of Arizona, Utah, Colorado, New Mexico, Wyoming, Montana, Oregon, Alaska, Washington and Idaho.

Responsibilities:

• Collaborate with the Region Director to develop and execute strategic business plans that achieve short- and medium-term financial goals.
• Monitor performance metrics, analyze results, and adjust strategies to enhance profitability and customer satisfaction.
• Lead and mentor a high-performing sales team, fostering collaboration across departments and ensuring alignment with company objectives.
• Drive revenue growth by targeting and securing new business opportunities in the formwork and shoring sector, along with additional market areas as instructed by the Region Director.
• Build and maintain strong relationships with key customers, contractors, and stakeholders to expand Doka’s market presence.
• Collaborate with the sales team to develop proposals, close deals, and manage customer accounts.
• Partner with engineering and operations teams to ensure projects are delivered on time, meet customer specifications, and comply with safety and industry standards.
• Ensure timely delivery of appropriate technical solutions that support sales and project execution.
• Recruit, train, and mentor sales staff, fostering a high-performance culture.
• Conduct performance evaluations, set goals, and provide constructive feedback to team members.
• Maintain accurate pipeline data quality in Doka’s specified CRM system.
• Promote a culture of safety, integrity, and continuous improvement.
  
  

• Bachelor’s degree in Business Administration, Engineering, Construction Management, or a related field.
• Minimum of 5-7 years of experience in a sales role within the construction, formwork, or shoring industry; leadership or strategic sales experience is preferred.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills for client and team interactions.
• Solid understanding of formwork and shoring systems, engineering principles, and construction processes.
• Strategic thinker with strong analytical and problem-solving abilities.
• Proficiency in project management tools and CRM software.
• Ability to travel within territory 50% or more
  
  

In accordance with applicable state and local pay transparency laws, Doka USA Ltd. is committed to providing a clear and equitable compensation structure for all roles. The salary range for this position is $130,000 – $160,000 annually, which is based on a variety of factors, including but not limited to, the candidate’s experience, qualifications, skills, and geographic location. This range represents the base pay for the position and does not include potential bonuses, commissions, benefits, or other forms of compensation. Final compensation will be determined at the time of offer and in accordance with internal equity and market data.

This role offers a performance-based commission structure, allowing employees to earn based on their individual sales achievements. While commission earnings will vary depending on market conditions and personal performance, commission is not guaranteed and solely depends on the employee's ability to generate sales, secure contracts, and meet performance targets. Commission payouts are governed by company policies and applicable commission agreements.

Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team.

If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us online at for additional information on Doka USA, Ltd.

Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference.

Please submit your resume and apply now.

External candidates must be authorized to work for any employer in the USA.