Engineering Jobs in Allentown Remote

• Bachelor’s Degree (BA/BS) in Chemistry or a related pharmaceutical science, with at least 5+ years of experience in analytical method development and validation, or
• Master’s Degree (MS/MA) with a minimum of 3+ years of relevant industry experience
• Extensive knowledge of cGMP, FDA/ICH guidelines, and regulatory standards (USP, Ph. Eur.)
• Hands-on experience with analytical instruments such as HPLC, GC, and familiarity with data acquisition software (Empower, Chemstation)
• Proficiency in laboratory management systems (Labvantage or equivalent) and Microsoft Office Suite
• Strong communication skills, with the ability to write clear reports and collaborate effectively with teams
  
  

• Experience with method transfer, stability studies, and troubleshooting
• Knowledge of DEA regulations and controlled substances handling
• Prior mentorship or training experience in analytical sciences
• Additional familiarity with reverse engineering, compatibility, and degradation studies
  
  

• Bachelor’s or Master’s degree in Chemistry or relevant pharmaceutical sciences
• 3 to 5+ years in a pharmaceutical analytical R&D setting, focusing on method development, validation, and regulatory compliance
  
  

• Ability to perform physical tasks including walking, standing, lifting up to 50 pounds, and working at various elevations
• Commitment to maintaining a safe, compliant laboratory environment and adhering to SOPs and regulatory guidelines
  
  

Aircraft Maintenance Technician (A&P)

Company: flyADVANCED

Location: KXLL – Allentown, PA

Primary Aircraft: Piper P100 Fleet

Compensation

• Hourly pay range $25-$45 per hour, based on experience.

About the Role

This position is part of the flyADVANCED maintenance team based at KXLL. While flyADVANCED operates separately from the flight school, this role exists primarily to support flyGATEWAY Flight School operations by maintaining a high-utilization general aviation training fleet.

The role is hands-on and maintenance-driven, ideal for technicians who enjoy working in a fast-paced environment focused on piston aircraft, preventative maintenance, and operational reliability rather than turbine or airline-style operations.

Our maintenance team plays a critical role in keeping the Piper P100 fleet safe, compliant, and mission-ready to support daily training operations.

Responsibilities include, but are not limited to:

• Perform scheduled and unscheduled maintenance on Piper P100 training aircraft
• Conduct 100-hour and annual inspections in accordance with FAA regulations
• Troubleshoot and repair airframe, powerplant, and basic avionics discrepancies
• Remove, install, rig, and operationally check aircraft components and systems as required
• Accurately complete maintenance records, logbook entries, and work orders in compliance with FAA and company standards
• Coordinate with flight school leadership to minimize aircraft downtime and maximize availability
• Work collaboratively with other technicians to ensure safe, efficient, and high-quality maintenance outcomes
• Maintain a clean, organized, and safety-focused maintenance workspace
• Support aircraft return-to-service and overall operational readiness

Additional Information

• This position is based at our KXLL facility supporting a dedicated Piper P100 training fleet
• The maintenance team operates in a high-utilization flight school environment with a strong emphasis on safety, reliability, and documentation accuracy

Qualifications / Skills

• Current FAA Airframe and Powerplant (A&P) Certificate
• Experience maintaining piston single-engine aircraft
• Strong troubleshooting skills across mechanical, electrical, and basic avionics systems
• Ability to work independently and as part of a team
• Excellent attention to detail and maintenance documentation accuracy
• Strong organizational and communication skills
• Ability to work flexible schedules, including occasional weekends

Preferred Qualifications

• Flight school or general aviation experience in a high-utilization setting
• Familiarity with Piper aircraft; P100 experience a plus
• Inspection Authorization (IA) preferred but not required
• Basic avionics troubleshooting experience

What We Offer

• Stable, consistent workload in a flight school support environment
• Supportive team culture focused on safety and professionalism
• Opportunities for growth as flight operations continue to expand

PROJECT ENGINEER – MATERIALS TECHNOLOGY (Rubbers & Elastomers)

*Excellent benefits package!

Location: Bethlehem, PA area (Relocation Assistance Available)

Up to 25% Travel

Summary:

Our client, a global manufacturer with a strong innovation culture and vertically integrated operations, is seeking a Project Engineer to support advanced materials product development initiatives. This role sits within onsite at our HQ with the Corporate Engineering Team and will focus on the development and commercialization of products leveraging thermoplastics, thermosets, composites, coatings, and specialty alloys.

This position offers exposure to full lifecycle product development, from concept generation through steady-state production.

KEY RESPONSIBILITIES

Product Development

• Lead and support development of non-metallic components and assemblies

• Drive projects from concept through validation and commercialization

• Develop and model design concepts (drawings and/or hardware)

• Collaborate with Sales and Marketing to refine product requirements

• Support costing, project authorization, and production readiness

Materials Engineering

• Develop and evaluate polymer formulations to meet performance specifications

• Conduct material testing and analysis (FTIR, DMA, DSC, TGA, tensile, etc.)

• Support prototyping and validation testing

• Resolve design, tolerance, and material performance challenges

• Participate in tooling selection and pilot production runs

Cross-Functional Leadership

• Facilitate design reviews to ensure customer and performance alignment

• Support supplier selection and technical validation

• Prepare technical documentation and product education materials

QUALIFICATIONS

• BS in Chemical, Materials, or Polymer Engineering required; MS preferred (Mechanical Engineering degree with plastics/polymer experience considered)

• 0–5 years of experience in plastics product design or polymer processing

• Knowledge of thermoplastic and thermoset materials (commodity through engineering grades)

• Experience with polymer testing and failure analysis

• Ability to travel globally up to 25%

Preferred

• FEA experience (Abaqus or Ansys preferred)

• Mold Flow Insight experience

• Exposure to structured product development processes

This role will help lead LNG Project Controls in newly created Project Controls Organization at UOP and will standardize program analytics, tools, and reports for a portfolio of programs, while enabling predictive analytics to aid in timely decision-making during execution. This role will support Honeywell business and program management leaders to ensure data integrity by enforcing compliance to management operating system and processes.

Join the specialist team that provides program analysis, process improvement, and metrics for Honeywell. You will lead the development of program plans, ensure cost and schedule integration and estimate at completion management on critical new and large complex programs across multiple sites. You will influence and collaborate with internal and external stakeholders to accept new concepts, practices, and approaches to program management.

This job will be a hybrid arrangement, located in Allentown, PA.

Key Responsibilities

• Coordinate the PCO team activities of projects managed through the UOP PCO, to ensure a good financial and operational control of this project business portfolio
• Advance skills on project cost control activities in project business environment. Accountable for accuracy & timely delivery of all project & management estimates, reports & forecasts for costs, revenue, billing & schedules on allocated projects
• Lead the implementation of the standard Project Controls tool sets and work processes on all projects in the allocated area
• Set up processes and structure to centralize PCO reporting requirements
• Implement project scheduling standards, templates, and model plans for the allocated area
• Support the LOB Operational Leaders in managing project reviews, controls, and reporting processes for the allocated area
• Responsible for the project controls set up process on large strategic projects supported in the PCO
• Responsible for supporting the AOP and forecast process with the Project Controls Leader
• Ensure integration of work processes to other UOP Regions and CoE groups
• Recruit, assign and manage Project Controls resources for the allocated area
• Develop and implement the Project Controls employee development plans and supporting infrastructure in the allocated area
• MS Office applications, SAP Projects Module, Primavera Project Planner.
• Tracking and measurement systems (implement, maintain), Project reporting (periodic, final, benchmark)
• Change management systems (implement, maintain)
• Estimating tools/techniques (types, scoping, components, templates, TPC
• Project scope definition and execution planning (as basis for identifying changes)
• Contract and subcontract administration (concepts and work processes)
• Global Project Management (methodology and tools)
• Business planning and analysis tools and Earned value (progress & productivity measurement)
• Finance (concepts and work processes), Cost risk analysis and contingency management, Cash flow (planned, actual, forecast)
• Project Controls Analysis (data, indices, variances, trends, projects), Planning and Integrated scheduling (concepts and work processes)
• Resource management loading (concepts and work processes)

YOU MUST HAVE

• Minimum 6 years related project controls experience
• Experience in oil & gas, utility, or EPC industry

WE VALUE

• BS Engineering Management; Business or Finance degree; or commiserate related experience
• Analytical skills
• Time management & resource allocation & utilization
• Negotiation and conflict management skills
• Performance management and coaching/counselling
• Risk management
• Presentation skills
• Business planning and analysis
• Leadership & team management skills
• Degree in Business, Science or Engineering, Finance or Accounting or related field
• Experience in Earned Value Management
• Ability to influence at varying levels across the organization
• Ability to Convey information with clarity and directness, ensuring the message is understood across diverse, global teams
• Project Management certification
• Proficient Microsoft Office package skills e.g. Excel, Project, Outlook, PowerPoint etc.
• Ability to deliver on complex situations or problems without guidance or supervision

Role Description

This is a full-time position for a Project Engineer/Senior Project Engineer. The role can be based in either PA, TN, WI ,Fl ,AL, or WI with some flexibility for work-from-home arrangements. The individual will oversee and execute project engineering tasks, manage project phases from initiation to completion, and ensure adherence to project timelines and budgets. The role also involves engaging in project planning, collaborating with cross-functional teams, and applying technical expertise in electrical engineering to ensure successful project delivery.

Qualifications

• Strong skills in Communication to work effectively with team members, stakeholders, and clients
• Proficiency in Project Management, including scheduling, resource allocation, and timeline management
• Demonstrated expertise in Medical Device Project Engineering and Project Planning to manage technical specifications and execution
• Technical knowledge in Medical Device Engineering, including design, implementation, and troubleshooting
• Ability to work effectively in a hybrid work environment, balancing on-site and remote responsibilities
• Bachelor's degree in Engineering or a related field
• Experience in a similar role in Medical Device Engineering is preferred

POSITION: Account Manager – Manufacturing / Industrial

About the role:

The Account Manager is responsible for managing and supporting assigned customer accounts by overseeing order flow, pricing, communication, and coordination between customers, production, and internal teams. This role serves as the primary point of contact for customers and plays a key role in ensuring accuracy, responsiveness, and execution across all stages of the order lifecycle.

This is not a cold-calling or commission-driven sales role. Instead, it is a relationship-based position focused on account ownership, operational execution, and understanding how manufacturing decisions impact cost, delivery, and customer satisfaction. The Account Manager works closely with production, planning, and outside sales to ensure customer needs are met efficiently and profitably.

What you’ll do:

• Act as the primary owner of assigned accounts from order entry through delivery and follow-up
• Manage customer relationships and day-to-day account activity
• Generate quotes, process orders, and manage revisions accurately and efficiently
• Review part history, pricing, volumes, and usage trends to ensure consistency and profitability
• Coordinate with production, planning, purchasing, and engineering to support order execution
• Understand lead times, material availability, and capacity when committing to customer requests
• Communicate order status, changes, and delays proactively
• Support outside sales with quoting, data analysis, and customer coordination
• Assist with re-quotes, pricing updates, and contract-driven adjustments
• Support inventory planning and customer-specific stocking strategies
• Maintain accurate records within ERP and CRM systems
• Identify risks or issues before they impact delivery, cost, or customer satisfaction
• Contribute to continuous improvement efforts related to order flow and customer support

We are looking for passionate leaders who bring initiative and creativity while putting the customer at the center of all they do!

What you’ll need:

• Manufacturing or industrial experience required (plastics, machining, OEM, or similar)
• Experience managing customer accounts, inside sales, or production coordination
• Strong understanding of pricing, margin, and how volume impacts profitability
• Ability to manage multiple priorities in a fast-paced environment
• Strong communication and organizational skills
• Comfortable working within ERP and CRM systems
• Detail-oriented, dependable, and proactive
• Able to work cross-functionally with sales, operations, and leadership
• High School Diploma or GED required
• (Preferred) BA or BS Degree (Business, Sales, Marketing, etc.) or substantial equivalent business experience
• (Preferred) Plastics/Manufacturing experience
• (Preferred) 4 years or more of manufacturing experience

How does Lehigh Valley Plastics support you?

Benefits: We offer a competitive base salary, Profit Sharing, dental, medical, and life insurance, 401k with matching benefits, tuition reimbursement, paid maternity and paternity leave, opportunity for growth, and more.

Description

About Us:

Unis accelerates logistics success with our Transportation Management System that offers unparalleled control, visibility, and adaptability. Unis strives in elevating our employees and operations toward new heights of excellence. As client’s partner with us, we focus on more than just a business relationship; it's an opportunity to unlock a world of value-added services that will enhance operational standards and elevate success by unifying our clients’ supply chain networks through superior technology, assets, and information services.

Job Description

Purpose and Scope:

• The General Manager is responsible for the operation and financial performance by providing strategic direction and leadership for all warehouse activities associated with shipping, receiving, warehouse and inventory management
• The General Manager will set objectives, goals, strategies and measures, will plan for continuous improvement and create new and innovative strategies necessary to consistently meet our customers’ expectations.

Responsibilities:

• Leading the development of a high-performance work environment.
• Full P& L responsibility, process management and customer Relations.
• Manages all warehouse activities including receiving, storing, picking, and shipping materials.
• Reviews, analyzes, modifies, and implements efficient and effective department processes, policies, and procedures.
• KPI measurement implementation includes labor control, inbound/outbound metrics, and inventory.
• Ensures the physical condition of warehouse and equipment are properly maintained.
• Effectively manages the budget and P&L of the operation.
• Partners with engineering to implement and maintain proper layout of warehouse and product placement.
• Performs quarterly and/or annual physical inventories; provides inventory reports.
• Partners with the customers to maintain a high level of customer satisfaction by providing consistent communication and following up on customers’ concerns and requests.
• Identifies, documents, and implements opportunities for continuous improvement.
• Maintains a working knowledge of all operating systems pertaining to the work area.
• Hires, trains, supervises, motivates, and develops warehouse staff; manages schedules and workflow.
• Assigns duties and monitors quality of work; assures staff conforms to organizational policies and procedures and government regulations including TAPA, AIB, and OSHA.
• Keeps up to date on team activities, identifying problem areas and taking corrective actions.
• Performs other related duties as required and assigned by management.

Skills / Qualifications:

• Strategic thinking and planning skills.
• Understanding of budget management and financial monitoring.
• Excellent leadership skills, including goal setting, motivating, training and mentorship.
• Exceptional interpersonal and communication skills, including writing, speaking and active listening.
• Effective conflict resolution and problem-solving skills.
• Good organization and time management.
• Comfortable in a fast-paced or high-pressure environment.
• In-depth knowledge of the industry.

Job Competency / Qualifications

Technical Requirements:

• High proficient in MS Office, Excel, Word, and PowerPoint.
• Experience with labor/workforce management and warehouse management systems (i.e. SAP, Red Prairie, Manhattan, JDA, etc.

Experience:

• Minimum 10 years of management experience in Third Party Logistics (3PL) required.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms