Engineering Jobs in Addison, TX
111 positions found — Page 2
Electronics Troubleshooting Specialist (RICHARDSON)
$43,200 - 77,700
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
Diagnostic Technician II - Daytime work schedule with weekends off (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
Circuit Board Repair Technician (RICHARDSON)
🏢 JABIL CIRCUIT, INC
$43,200 - 77,700
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
Manufacturing Operations Engineering Lead (RICHARDSON)
🏢 JABIL CIRCUIT, INC
$121,300 - 218,300
Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast‑growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high‑mix/high‑volume PCB assembly and secondary processes.
What You’ll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‑on leadership style.
What You’ll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‑on leadership style.
temporary
D
Technical Project Manager
Salary not disclosed
Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.
Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
Job Title: Technical Project Manager – Data Center Power/Thermal
Location: Plano, Department: Data Center SBP
We are looking for a skilled Technical Project Manager – Data Center Power/Thermal to lead power and cooling infrastructure projects, providing technical oversight, managing cross-functional teams, and ensuring project success from inception to completion.
Key Responsibilities:
- Project Leadership & Execution: Plan, manage, and oversee power/thermal infrastructure projects from inception to completion, ensuring timely delivery and quality standards are met.
- Technical Oversight: Apply expertise in power supply, power distribution, and thermal management to guide technical decisions, validate designs, and optimize system performance.
- Stakeholder Management: Serve as primary technical contact person for strategic customers and internal teams. Coordinate with sales, engineering, and service teams to drive project success.
- Site Management & Quality: Conduct site evaluations, oversee installation quality, and ensure compliance with specifications and standards. Position requires up to 30% travel.
- Financial Management: Develop and control project budgets, track expenses, maintain target margins, and implement risk mitigation strategies to ensure project success.
- Vendor Coordination: Build and manage supplier relationships, evaluate proposals, and optimize procurement strategies to enhance project efficiency and value.
- Project Controls: Maintain comprehensive project documentation, oversee technical submittals, and provide regular updates on project performance and financial metrics.
Required Qualifications:
- Education: Bachelor's degree in Mechanical or Electrical Engineering (or equivalent experience)
- Experience: 5 years or more managing power infrastructure or mission-critical facility projects
- Technical Knowledge: Demonstrated experience with:
- Power supply and power distribution
- Cooling systems and thermal management
- Energy efficiency optimization
- Data center operations
- Tools: MS Office Suite and proficiency in project management software (Procore, MS Project, Jira, or similar)
- Leadership: Proven ability to manage cross-functional teams and engage diverse stakeholders
- Skills: Strong analytical and problem-solving capabilities with ability to adapt to changing priorities
Preferred Qualifications:
- Experience in supporting colocation, hyperscale, enterprise data center business
- Professional Certifications: PMC, PE, DCEP, or ATD
- Knowledge: Familiarity with New Product Introduction (NPI) processes
Salary is within 120-150k along with Bonus
Not Specified
F
Product Manager - Patient Experience and Denial Prevention
Salary not disclosed
Impact you will make
We are seeking an experienced Product Manager to lead the vision, strategy, and execution of our Patient Experience and Denials Prevention analytics products focused on healthcare revenue workflows in healthcare. This role provides both strategic and people leadership, overseeing a team of Product Owners while working cross-functionally to ensure our solutions deliver measurable value to healthcare providers.
The Product Manager will collaborate closely with the Sr. Director of Product Management and fellow Product Managers to define portfolio strategy and drive cross-product alignment. This role is responsible for turning market needs and business goals into actionable roadmaps, partnering across the organization to deliver high-impact analytics products that support operational efficiency and financial performance in the revenue cycle.
Responsibilities:
- Lead the product direction for a defined domain, including shaping the roadmap, aligning with business objectives, and ensuring successful delivery
- Manage and mentor a team of Product Owners, supporting their development and ensuring clear priorities and execution
- Collaborate with other Product Managers and the Sr. Director of Product Management to develop and maintain an integrated product portfolio strategy
- Translate customer and market needs into business cases, value propositions, and prioritization frameworks
- Guide cross-functional teams through the product lifecycle, from ideation to delivery and adoption
- Ensure strong coordination with Engineering, UX, Data Science, Marketing, and Customer Success teams
- Monitor product performance through defined KPIs and partner on go-to-market and enablement activities
- Maintain subject matter expertise in revenue management and revenue recovery workflows
Qualifications:
- 5+ years of experience in product management or related roles, with 2+ years of team leadership preferred
- Proven ability to manage and mentor Product Owners or similar roles
- Strong collaboration and communication skills, with experience leading through influence across departments
- Deep understanding of the healthcare revenue cycle, particularly revenue recovery processes
- Experience with analytics, SaaS, or data-driven solutions in a regulated or healthcare setting
- Strategic thinker with strong execution skills and attention to measurable outcomes
What we would like to see
- Experience with process diagrams and flowcharts (MS Visio, Draw IO, etc.)
- Experience in a customer-facing role
- SQL and database knowledge a plus
About FinThrive
FinThrive is advancing the healthcare economy.
For the most recent information on FinThrive's vision for healthcare revenue management visit /why-finthrive.
Award-winning Culture of Customer-centricity and Reliability
At FinThrive we're proud of our agile and committed culture, which makes FinThrive an exceptional place to work. Explore our latest workplace recognitions at careers#culture.
Our Perks and Benefits
FinThrive is committed to continually enhancing the colleague experience by actively seeking new perks and benefits. For the most up-to-date offerings visit /careers-benefits.
FinThrive's Core Values and Expectations
- Demonstrate integrity and ethics in day-to-day tasks and decision making, adhere to FinThrive's core values of being Customer-Centric, Agile, Reliable and Engaged, operate effectively in the FinThrive environment and the environment of the work group, maintain a focus on self-development and seek out continuous feedback and learning opportunities
- Support FinThrive's Compliance Program by adhering to policies and procedures pertaining to HIPAA, FCRA, GLBA and other laws applicable to FinThrive's business practices; this includes becoming familiar with FinThrive's Code of Ethics, attending training as required, notifying management or FinThrive's Helpline when there is a compliance concern or incident, HIPAA-compliant handling of patient information, and demonstrable awareness of confidentiality obligations
Physical Demands
The physical demands and work environment characteristics described here are representative of those that a colleague must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Statement of EEO
FinThrive values diversity and belonging and is proud to be an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. We're committed to providing reasonable accommodation for qualified applicants with disabilities in our job application and recruitment process.
FinThrive Privacy Notice for California Resident Job Candidates
Know Your Rights
Pay Transparency Notice
FinThrive is an Equal Opportunity Employer and ensures its employment decisions comply with principles embodied in Title VII, the Age Discrimination in Employment Act, the Rehabilitation Act of 1973, the Vietnam Veterans Readjustment Assistance Act of 1974, Executive Order 11246, Revised Order Number 4, and applicable state regulations.
2024 FinThrive. All rights reserved. The FinThrive name, products, associated trademarks and logos are owned by FinThrive or related entities. RV092724TJO
| FinThrive Careers | FinThrive Benefits & Perks | Physical Demands
Not Specified
S
Sales Representative
Salary not disclosed
Job Description
Job Description
ScaleHouse Talent is the specialized recruiting engine behind the fastest-growing home remodeling companies in America. We don't just fill seats; we align high-performers with organizations that offer the best leads, the best products, and the highest commissions in the industry.
We are currently seeking a Heavy-Hitter Outside Sales Representative for our premier partner in the DFW market. This company is a Texas-based powerhouse, recognized as a Top Place to Work and a leader in high-end bathroom, kitchen, and window transformations. They have the infrastructure of a national giant but the heart of a local legend.
What's In It For You?
* Uncapped Commissions: Realistic six-figure earning potential. Average performers earn $120k-$160k; our top producers are clearing $200k+
* High-Intent Leads: You will be provided with 8-10 pre-set, qualified appointments per week generated by massive national and regional partnerships.
* The "You Sell It, We Install It" Model: Backed by W2 installers and a dedicated production team. You focus on the contract; they focus on the craftsmanship.
* Full Benefits: Comprehensive medical, dental, and vision packages.
* Elite Training: Two weeks of comprehensive training with world-class field support.
What You'll Do
* In-Home Consultations: Meet with homeowners in the DFW area to design and sell premium remodeling solutions.
* Consultative Excellence: Conduct 90 minute presentations, building rapport and educating homeowners on value over price.
* Master the Close: Confidently navigate objections and secure contracts during the initial visit.
* Professional Representation: Act as the face of a brand known for "People-First" values and exceptional community impact.
What You'll Need
* The "Closer Instinct": A proven track record in "one-call close" or high-ticket sales environments.
* Resilience: You thrive in a performance-based, commission-only structure where you are rewarded for your output.
* Flexibility: Mandatory one weekend day a week—when homeowners are actually home and ready to buy.
* Tech Literacy: Proficiency in using iPad-based design tools and CRM systems.
Who Is ScaleHouse Talent?
We are not a traditional "recruiting agency." We are growth partners for the elite. ScaleHouse exclusively represents brands that offer stability, premium compensation, and a winning culture. Our vetting process is rigorous because our clients only want the best. When you apply through ScaleHouse, you aren't just another resume in a pile—you are being positioned for a career-defining role with a market leader.
Job Description
ScaleHouse Talent is the specialized recruiting engine behind the fastest-growing home remodeling companies in America. We don't just fill seats; we align high-performers with organizations that offer the best leads, the best products, and the highest commissions in the industry.
We are currently seeking a Heavy-Hitter Outside Sales Representative for our premier partner in the DFW market. This company is a Texas-based powerhouse, recognized as a Top Place to Work and a leader in high-end bathroom, kitchen, and window transformations. They have the infrastructure of a national giant but the heart of a local legend.
What's In It For You?
* Uncapped Commissions: Realistic six-figure earning potential. Average performers earn $120k-$160k; our top producers are clearing $200k+
* High-Intent Leads: You will be provided with 8-10 pre-set, qualified appointments per week generated by massive national and regional partnerships.
* The "You Sell It, We Install It" Model: Backed by W2 installers and a dedicated production team. You focus on the contract; they focus on the craftsmanship.
* Full Benefits: Comprehensive medical, dental, and vision packages.
* Elite Training: Two weeks of comprehensive training with world-class field support.
What You'll Do
* In-Home Consultations: Meet with homeowners in the DFW area to design and sell premium remodeling solutions.
* Consultative Excellence: Conduct 90 minute presentations, building rapport and educating homeowners on value over price.
* Master the Close: Confidently navigate objections and secure contracts during the initial visit.
* Professional Representation: Act as the face of a brand known for "People-First" values and exceptional community impact.
What You'll Need
* The "Closer Instinct": A proven track record in "one-call close" or high-ticket sales environments.
* Resilience: You thrive in a performance-based, commission-only structure where you are rewarded for your output.
* Flexibility: Mandatory one weekend day a week—when homeowners are actually home and ready to buy.
* Tech Literacy: Proficiency in using iPad-based design tools and CRM systems.
Who Is ScaleHouse Talent?
We are not a traditional "recruiting agency." We are growth partners for the elite. ScaleHouse exclusively represents brands that offer stability, premium compensation, and a winning culture. Our vetting process is rigorous because our clients only want the best. When you apply through ScaleHouse, you aren't just another resume in a pile—you are being positioned for a career-defining role with a market leader.
Not Specified
A
Automotive Technician Automotive Mechanic
Salary not disclosed
Job Description
Job Description
Job description:
Trowell & Turner is a family-owned shop operating in Dallas, Texas for 75+ years
We are seeking an Automotive Technician with extensive vehicle diagnostic and repair skills. In this role, you will diagnose a wide range of issues and make repairs to engines, suspensions, and electronic systems. Our customers drive many different kinds of cars and trucks, so you must be comfortable working on a variety of makes and models.
Requirements and Qualifications
* Auto technician or mechanic experience (5-5 years)
* Valid driver's license
* ASE certification is a plus
Job Type: Full-time
Benefits:
* Employee discount
* Health insurance
* Professional development assistance
Work Location: In person
Job Description
Job description:
Trowell & Turner is a family-owned shop operating in Dallas, Texas for 75+ years
We are seeking an Automotive Technician with extensive vehicle diagnostic and repair skills. In this role, you will diagnose a wide range of issues and make repairs to engines, suspensions, and electronic systems. Our customers drive many different kinds of cars and trucks, so you must be comfortable working on a variety of makes and models.
Requirements and Qualifications
* Auto technician or mechanic experience (5-5 years)
* Valid driver's license
* ASE certification is a plus
Job Type: Full-time
Benefits:
* Employee discount
* Health insurance
* Professional development assistance
Work Location: In person
Not Specified
U
Information Technology Professional
🏢 US Navy
Salary not disclosed
When warfare moves at the speed of technology, we need personnel who can always keep us one step ahead of our enemies. As an Information Professional Officer, you lead your team of Enlisted Information Systems Technicians to ensure the delivery of communications capabilities by operating, maintaining and securing our networks around the globe. Assist with top secret cyberwarfare missions and discover tactical and strategic advantages afloat and ashore. IPO is a big job, but your team will always have your back.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Information Professional Officer
More Information
Responsibilities
Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:
Work Environment
Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:
Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.
There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.
All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as an Information Professional Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Information Professional Officer
More Information
Responsibilities
Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:
- Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
- Driving interoperability with joint, allied and coalition partners
- Building professional excellence through education, training and certification and milestone qualifications
- Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
- Helping to develop and deploy information systems, command and control and space systems
- Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
- Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology
Work Environment
Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:
- Serving as part of Battle Group staffs on ships at sea
- Working in C4I/Space/Surveillance on shore tours
- Serving on major Navy and joint staffs
- Serving in command of key communication and surveillance facilities around the globe
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.
There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.
All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as an Information Professional Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Not Specified
SMT Engineering Tech (1st Shift - 6am-2:30pm M-F)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job SummaryThe SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
permanent
Test Engineering Tech III
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARYESSENTIAL DUTIES AND RESPONSIBILITIES· Provides input for colleague's performance appraisals· Assists Test Engineers when commissioning new test equipment.· Provides technical assistance to other technicians on the same shift.· Provides line support to manufacturing for all test processes.· Ensures "machine down" calls are responded to in a timely manner.· Liaises with manufacturing to determine repair priorities.· Ensures adequate spares are available for all allocated equipment.· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.· Escalates to Test Engineers any unresolved/ongoing issues.· Instructs operators on safe/effective use of test equipment.· Provides daily report of all line issues.· Provides weekly/quarterly downtime reports for allocated equipment.· Sources spares from the most cost effective supplier.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.
Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday
- Friday 3:00 p.m.
- 11:30 p.m.
permanent
SMT Engineering Technician (2nd Shift - 3-11pm M-F)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job SummaryThe SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.Job Responsibilities
- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
permanent
Site Engineering Manager
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast‐growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high‐mix/high‐volume PCB assembly and secondary processes.
What You'll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‐functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor's degree in engineering or related field, plus 5-8 years' related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‐driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‐on leadership style.
permanent
Diagnostic Technician II
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARYResponsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday
- Friday 6:00 a.m.
- 2:30 p.m.ESSENTIAL DUTIES AND RESPONSIBILITIES· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.· Exhibit proficiency in the use of electronic test and measurement equipment.· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM's, EC documents, Visuals, Debug, Testing tools and procedures.· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.· Work as a team member to achieve Diagnostic department's process yield goals.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.
Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
permanent
SMT Principal Engineer - Opportunities for Leadership and Innovation (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Test Engineering Tech II - Collaborative Cross-Functional Team Environment (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
Test Engineering Tech II (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
SMT Principal Engineer (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Surface Mount Process Development Expert (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Test Engineering Tech III (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
temporary
jobs by
