Engineering Journal Thailand Jobs in Fl
478 positions found — Page 3
Role Summary
The Engineer (PE) is responsible for independently delivering high-quality engineering design and analysis in support of transportation and civil infrastructure projects throughout Florida. This role applies technical expertise, professional judgment, and regulatory knowledge to produce compliant, accurate, and client-ready deliverables while supporting project performance goals.
Essential Duties and Responsibilities
· Prepare engineering plans, calculations, technical reports, and specifications
· Perform design and analysis for roadway, traffic, drainage, or site development projects
· Ensure compliance with FDOT, local agency, and regulatory standards
· Review and seal engineering documents as required
· Coordinate with project managers, clients, and multidisciplinary teams
· Support permitting processes and agency submittals
· Assist in scope development and proposal support as needed
· Contributes to on-time, on-budget project delivery
· Maintains billable utilization targets
· Identifies design efficiencies and risk mitigation strategies
· Supports performance through accuracy and reduced rework
Competencies
· Technical expertise and professional judgment
· Attention to detail and quality control
· Effective written and verbal communication
· Time management and project coordination skills
· Ability to mentor junior staff (senior-level candidates)
Qualifications
· Bachelor’s degree in Civil Engineering or closely related field
· Active Florida Professional Engineer (PE) license (Required)
· 3–8+ years of progressive engineering experience (level dependent)
· Experience with FDOT or municipal agency standards preferred
· Proficiency in design software (MicroStation, AutoCAD Civil 3D, or similar)
· Strong understanding of permitting and regulatory requirements
Compensation and Benefits
· Competitive salary is commensurate with experience + bonus eligibility
· Employer Paid Health/Vision Insurance
· Employer Paid Short-Term and Long-Term Disability Insurance
· Employer Paid Dental Insurance
· Employer Paid Basic Life and AD&D Insurance
· 401(k) Plan w/ up to 4% Employer Match and 100% immediate vesting
· Remote Work up to two (2) days per week
· Professional Development Assistance
· Generous Paid Time Off
· 7 paid company holidays per year plus an additional 5 days of paid time off between Christmas and New Year’s Day
Physical Demands
· While performing the duties of this job the employee is occasionally required to stand, sit, walk, bend and occasionally lift and move up to 25 pounds.
· Occasional travel to other company locations may be required for team meetings, company events, or collaborative projects.
L3Harris has an opportunity for a highly skilled Thermal Analyst to join our talented engineering organization.
The Thermal Analyst will be a technical leader across multidisciplinary teams of engineers to create the best overall system design including thermal design, analysis, and test of optical systems operating in harsh space and ground environments.
The candidate will possess in-depth understanding of aerospace thermal engineering technology and payload architectures for spacecraft sub-systems and instruments.
These talents are used to direct and oversee teams who specialize in conductive, convective, and radiative analyses, understanding of heat pipes, radiative heat transfer, and thermal control hardware design (thermal blankets, surface treatments, heater tapes, thermistors) and the interaction with optical structures in order to minimize optical errors, and achieve operational temperatures.
The role requires utilizing state of the art custom software in conjunction with Thermal Desktop and Finite Element Analysis (FEA) packages and often mentor other Thermal Analysts in the use of such tools.
Essential Functions: System level thermal design & development, payload level integration and test, and risk mitigation for space-based environments Perform thermal design and analysis tasks on complex mechanical hardware including precision mechanisms, electro-mechanical devices, aerospace mechanism design, complex electronics packaging, supporting space-based deployable mechanisms, avionics, innovative thermal and ground based systems Create and analyze design concepts using thermal analysis software & FEA Defines and establishes the technical approach to meet assigned objective Directs, coordinates and provides assistance to engineering team in order to meet assigned objectives Program support also includes requirements derivation and verification, system architecture development, loads derivation, trade studies, design sensitivity/optimization studies, preliminary and final design analysis, generation of analysis documentation (including presentation materials, and deliverable data packages), and leading system test activities Organization of thermal design and analysis as an IPT lead; frequently interfacing directly with customer technical leads and management.
Prepares reports, formal documentation and presentation materials summarizing analysis results and present results to both external and internal groups, including leadership and customers Participates in and present information for Preliminary Design reviews (PDR), Critical Design Reviews (CDR) and Technical Interchange Meetings (TIM) Interfaces with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Systems Engineering, Electrical, Manufacturing, Performance, Quality, Configuration Management) Presents design details at program reviews to customers and independent reviewers Development of thermal test plans to manufacture and test payload sensor systems Support new business opportunities Mentor junior level engineers Qualifications: Bachelor's Degree in Mechanical Engineering or other related engineering or science degree and minimum 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, minimum of 13 years of prior related experience 7 years of professional experience using thermal analysis tools such as Thermal Desktop (preferred), Sinda, Flotherm, Icepak, etc.
4 years of providing technical leadership to a multi-disciplinary mechanical engineering team through system requirements, design, analysis, test, hardware build, delivery and launch Professional experience with thermal analysis of mechanical and electronic systems, in space, air or ground environments Professional experience with thermal vacuum testing Ability to obtain and maintain a U.S.
TS/SCI Security Clearance Preferred Additional Skills: Experience with finite element analysis software Able to support design decisions with well documented engineering analyses and calculations Able to analyze problems and to focus and drive down to the root cause of problems quickly Experience in leading engineering teams from conceptual through detailed design phases Experience as a lead engineer, project engineer, or IPT lead is a plus.
Experience with Microsoft office tools (Word, Excel, PowerPoint, etc.) Active TS/SCI clearance In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $122,000.00
- $227,000.00 .
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .aa415a4b-8b21-40fc-a65c-70d2b25ca29a
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Nuclear Officer
More Information
Responsibilities
Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for America's Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include:
Reactor and fluid systems design
Reactor physics
Materials development
Component design such as steam generators, pumps and valves
Instrumentation and control of reactor, steam and electric plants
Testing and quality control
Shielding
Chemistry and radiological controls
As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships.
Work Environment
Preliminary training and eventual staff assignments center around Naval Reactors headquarters at the Navy Yard in Washington, D.C. At headquarters, you will be a part of a stream-lined, elite staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle-to-grave.
Even junior level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including:
Two Department of Energy laboratories
Two nuclear prototype/training sites
Nearly 100 nuclear-powered ships and submarines
Six shipyards
More than 1,000 firms that support the Naval Reactors Program
Training & Advancement
Upon graduation from college, the formal training process of becoming an officer in the Naval Nuclear Propulsion program is officially underway. For those pursuing a Naval Reactors Engineer position, the first step is Officer Development School (ODS) in Newport, RI - a 5-week course of instruction in Newport, RI, that provides a comprehensive and intense introduction to the responsibilities of being a Naval Officer.
Upon completion of ODS, newly commissioned Ensigns move on to receive initial training at Naval Reactors Headquarters in Washington, D.C. (9 weeks of instruction) and Nuclear Power Training Unit (2 weeks of instruction) that form the basis for more advanced academic work. Officers then attend Bettis Reactor Engineering School (BRES), a 6-month postgraduate-level education in nuclear engineering at Naval Nuclear Labs just outside Pittsburgh, PA. This is followed by approximately three weeks spent gaining a working background at one of the Navy's shipyards in either Newport News, VA, or Bremerton, WA.
Following the training pipeline, Naval Reactors Engineers are then assigned a Nuclear Engineer position with the group responsible for managing all technical aspects of the Naval Nuclear Propulsion program-reviewing, approving and confirming the design, operation and maintenance of nearly 100 nuclear reactors. Continuing education is required for the next six months as Engineers start in a junior role under a supervisor and rapidly advance to take on increasing responsibilities and complete their 5-year commitment.
Post-Service Opportunities
As a Naval Reactors Engineer, you will have incredible post-service prospects. The highly-selective nature of the program combined with world-class advanced training and qualifications means your skills and knowledge are in high demand. Adding "Navy Nuke" to your list of accomplishments will make you a top candidate for a variety of future careers including civilian engineering and management jobs after you complete your service.
Education Opportunities
In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program.
If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can:
Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation
Receive an immediate one-time sign-on bonus of $15,000
Enjoy military health care benefits while you are a student in the program
Have your college years enrolled in the program count towards retirement
Be a full-time student with no military duties while in college
Interested candidates should connect with a recruiter and ask about joining an engineer-specific Q&A information session. This will help you learn more about what the job entails and get answers for any of your questions.
Postgraduate Education Opportunities
As a Naval Reactors Engineer, once you're out of school you'll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education by:
Completing Joint Professional Military Education (JPME) at one of the various service colleges
Using Tuition Assistance to attend online or in-person graduate programs during shore assignments.
Navy College Program
VOLED Assistance Center
VOLED Region Advisors
The Naval Postgraduate School (NPS)
Navy War College (NWC)
USAF Air University Air Command and Staff College
Qualifications & Requirements
Because of the demanding nature of Naval Nuclear Propulsion Program and the magnitude of the responsibilities members will take on from a young age, requirements to become a candidate and join NUPOC are stringent.
The NUPOC program is open to both men and women. The following program qualification criteria apply.
To be an eligible candidate, you must:
Be a U.S. citizen (dual citizens must renounce non-US citizenship)
Be at least 19 years of age and less than 29 years of age at the time of commissioning-waivers up to 40 years of age for select jobs may be available
Meet any additional physical standards of the Navy
Education Requirements
Candidates must be graduates or students of an accredited college or university in the United States or in a United States territory pursuing a BA, BS or MS (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include:
Completed one academic year of calculus
Completed one academic year of calculus-based physics
A competitive GPA and a minimum grade of "B" in all technical courses
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are no part-time jobs as a Navy Reserve Sailor in this role. Go back to Careers to find other jobs that have a Reserve component. You can also find out more about what life is like as a Reserve Sailor in the Navy.
Compare Navy Careers
See how a career as a Gas Turbine Systems Technician - Electrical compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
NOVA Engineering is currently seeking afully-certified Commercial Building Code Inspector in Panama City Beach FL. Primary duties will include performing building code inspections and/or plans review (building / structural, mechanical, electrical, and plumbing – as licensed) on residential and commercial buildings, as well as managing specific projects related to these types of code inspections. Some travel may be required for inspections and/or managing projects in the assigned area. The inspector positions are predominately located in the field but may occasionally include office assignments.
Essential Functions:
- Building Code Review and/or Quality Control Inspections on commercial construction projects (Building, Mechanical, Electrical, and Plumbing)
- Prepare written and electronic reports, and issue notices of correction
- Explain and interpret code and/or quality control regulations or requirements
- Recognize, evaluate and properly resolve unique problems or situations
- Maintain effective customer service relationship with clients and the public
- Assist the inspection management team with business development
- Perform other related duties as assigned by the Manager
Qualifications:
- Required state of Florida commercial building inspection license (BN#) in two or more of the following disciplines: Building (Structural), Mechanical, Electrical, and Plumbing.
- 3+ years’ experience performing plan review and/or inspections
Check out our Perks:
In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits:
- Use of take-home Company Vehicle and gas card for daily travel to work sites
- Comprehensive group medical insurance, including health, dental and vision
- Opportunity for professional growth and advancement
- Certification reimbursement
- Paid time off
- Company–observed paid holidays
- Company paid life insurance for employee, spouse and children
- Company paid short term disability coverage
- Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection
- 401K retirement with company matching of 50% on the first 6% of employee contributions
- Wellness program with incentives
- Employee Assistance Program
NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.
Date Posted:
2026-02-16Country:
United States of AmericaLocation:
US-AZ-TUCSON-827C ~ 1151 E Hermans Rd ~ BLDG 827C (External Site)Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is an industry leader in Stealth Technology. We are involved in all phases of development, production, and maintenance of Low Observable (LO) weapon systems. We are currently looking for Stealth / Low Observable / Radar Cross Section (RCS) / Signature Management / Survivability Engineers to work on challenging, state of the art technical projects
Do you have a passion for LO technology?
Would you enjoy working at both an outdoor RCS range and a large indoor RCS chamber to support our nation’s security?
If you answered "yes" to these questions, our Signature Management & Technology team at our Tucson, AZ, facility wants to hear from you!
What You Will Do
We are seeking mid to senior career Engineers to join the Signature Management & Technology Team. At Raytheon, you will be part of a team whose responsibilities span the full lifecycle of the product- from initial conceptual design to modeling and analysis, from component to missile level RCS testing, and production support to maintainability.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
Eight (8) years experience in calibrating, operating, and trouble shooting instrumentation radars for far field RCS measurements
Experience using RCS processing software for data analysis
Qualifications We Prefer
Experience operating and maintaining Resonant Sciences Radarman II instrumentation radar
Experience operating near field radar systems
Experience with range certification/registration process and management of the range handboo
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligibility
Learn More & Apply Now! (Optional)
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Join Ingenuity Engineers, Inc. as an Electrical Engineer II and become an essential part of our dynamic team! In this role, you'll work side by side with talented Project Engineers and Project Managers to craft, detailed electrical design documents. Your work will play a key role in ensuring that our projects are compliant and ready for permits. If you're passionate about shaping the future of electrical design and want to be a part of a forward-thinking team, we want to hear from you!
Key Responsibilities:
- Understands advanced electrical theory/calculations, electrical system components and devices.
- Interprets codes, standards and design inputs with the ability to apply them within the design.
- Develops calculations, design narratives and work plans to be used as the basis of design of power, lighting and fire alarm plans, single line/riser diagrams, panel and light fixture schedules and project specifications with minimal direction.
- Assumes the role of Engineer of Record for own projects.
- Reviews the work of others and gives specific guidance to the project team to advance the design.
- Provides mentorship to team members with less experience and training.
- Applies advanced engineering principles to solve technical and coordination issues.
- Manages project designs and budgets with limited oversight.
- Attends internal and client coordination meetings, provides direction, make technical decisions and ensure project goals are achieved.
- Performs site visits and investigations with little or no supervision if needed and resolve any challenges encountered.
- Cultivates relationships with clients to foster additional projects.
- Enhances leadership and management abilities.
- Provides cross-disciplinary technical and engineering assistance.
- Contributes to development efforts.
- Refines and develops processes to improve efficiency and quality.
- Takes personal ownership of the work produced.
Required Qualifications:
- Bachelor’s degree with P.E.
- Extensive proven relevant technical and field experience.
- Previous Leadership experience preferred.
- Experience working in a professional A/E office, Consulting Firm, Construction Contractor, or equivalent.
- Proficiency in Revit, AutoCAD, Microsoft Office, Bluebeam and other basic software.
- Strong written, verbal and communication skills with the ability to participate in a collaborative team environment, including coordination with people/teams outside of the company.
- Comprehensive understanding of the components of mechanical, plumbing, and fire protection systems that require power, with the ability to integrate those requirements into the electrical design.
- Ability to sit, stand, walk for extended periods, with occasional bending and the capacity to lift up to 10 lbs. as needed.
- Ability to travel
Description:
Controls & Systems Analyst to support both our industrial automation projects. This role blends hands-on engineering—such as site surveys, control panel design, and automation support—with internal software development, troubleshooting, and system enhancements. If you enjoy solving technical problems, working across teams, and balancing customer-facing and internal project work, this role is for you.
What You'll Do
- Conduct site surveys and collaborate with customers and project teams to define technical requirements.
- Review bid specs, drawings, and documentation to support accurate project quoting.
- Design industrial control panels, including layouts, wiring diagrams, and hardware selection.
- Support internal business systems through analysis, coding, testing, and maintenance of applications.
- Coordinate resources and timelines for larger system projects.
- Troubleshoot user issues, provide technical guidance, and support system improvements.
- Maintain high-quality documentation for both automation and software projects.
- Collaborate with engineering, operations, IT, and customer teams to ensure successful project outcomes.
What You Bring
- Bachelor's degree in Computer Science, Information Systems, Engineering, or related field preferred.
- Experience in controls engineering and industrial automation support preferred.
- Familiarity with PLCs, HMIs, VFDs, sensors, and industrial electrical principles.
- Electrical CAD drawing experience (AutoCAD or BricsCAD preferred), CAD macro scripting a plus.
- Strong communication, troubleshooting, and documentation skills.
- Customer-focused mindset and ability to work cross-functionally.
- Valid driver's license with insurable driving record.
Start Date: ASAP
Starting pay: $24hr + opportunities for growth
Qualifications:
- Bachelor's or Associates degree in Math or Science
- 2.9 GPA or higher
- US Passport
- Reliable transportation
Day-to-Day
Insight Global has a client looking for entry level degreed PETS. This is the first level of the Engineering classification. The Engineer will provide engineering/technical expertise to solve problems in the electrical utilities area, with close supervision. They are expected to develop skills in their field of study, and the ability to work with greater independence.
They will be assigned to a project that requires utility pole design mapping. They will be given survey packets of the poles they are mapping. These surveys were collected by the people out in the field. With the survey packets they will know the geographic location of the poles and the different assets (wires, boxes, etc.) attached to each pole. They will use all this information to digitally create the design \"distribution\" map.
Start Date: ASAP
Starting pay: $24hr + opportunities for growth
Qualifications:
- Bachelor's or Associates degree in Math or Science
- 2.9 GPA or higher
- Degree in science or mathematics
- US Passport
- Reliable transportation
Day-to-Day
Insight Global has a client looking for entry level degreed PETS. This is the first level of the Engineering classification. The Engineer will provide engineering/technical expertise to solve problems in the electrical utilities area, with close supervision. They are expected to develop skills in their field of study, and the ability to work with greater independence.
They will be assigned to a project that requires utility pole design mapping. They will be given survey packets of the poles they are mapping. These surveys were collected by the people out in the field. With the survey packets they will know the geographic location of the poles and the different assets (wires, boxes, etc.) attached to each pole. They will use all this information to digitally create the design \"distribution\" map.
Join the Velocity Team!
Bring your unique talents and fresh perspective to Velocity Resource Group. We’re looking for motivated, early-to-mid career recruiting professionals who thrive in a fast-paced, high-energy in-office environment and are eager to make an immediate impact. At Velocity, we pursue excellence every day and we’re excited to partner with talent who share that mindset.
About Us
Velocity Resource Group is a recruiting solutions company that leverages a global workforce to deliver qualified candidate resumes overnight. Our disciplined, data-driven approach to sourcing, pre-screening, and recruiting efficiency provides a strategic advantage to organizations seeking top talent quickly and cost-effectively.
We are headquartered in Tampa, FL, with an Asian headquarters in Bangkok, Thailand, and satellite offices in Chicago, IL, and Milwaukee, WI. Our innovative recruiting model places us at the forefront of modern talent acquisition.
The Role
As aTalent Acquisition Specialist, you will represent Velocity and engage directly with candidates on behalf of our clients. This role is performed on-site in the Velocity headquarter office in Tampa, FL and focuses on high-volume candidate outreach and qualification through inbound and outbound calls, resume reviews, and applicant tracking system updates.
Our clients span across healthcare, manufacturing, IT, and more ensuring a dynamic, engaging workload. This is an excellent opportunity for recruiters looking to build experience, sharpen sourcing and screening skills, and contribute meaningfully to a collaborative, in-person team environment.
The Ideal Candidate
You are personable, resilient, and comfortable speaking with candidates over the phone. You handle rejection professionally and remain pleasantly persistent. You’re detail-oriented, goal-driven, and energized by metrics and results.
You thrive working on-site with a team, value real-time collaboration, and are willing to research roles, clients, and candidates as needed to support collective success.
Essential Duties
• Qualify candidates for open job opportunities efficiently and professionally
• Conduct inbound and outbound candidate outreach
• Overcome candidate objections and address concerns
• Answer candidate questions regarding job opportunities and hiring processes
• Review inbound resumes within Velocity’s internal applicant tracking system
• Accurately document candidate information and screening notes
Qualifications
• 1 year to 3 years of experience in recruiting, talent acquisition, call center, sales or customer service roles
• Bachelor’s or Associate’s degree preferred (or equivalent professional experience)
• Strong verbal and written communication skills
• Comfortable with high-volume phone-based work
• Ability and willingness to work in-office on a consistent schedule
• Solid computer skills, grammar, and multitasking ability
• Strong attention to detail, time management, and decision-making skills
• Demonstrated reliability and professionalism
Core Competencies
• Customer Focus – Committed to positive candidate and client experiences
• Communication – Clearly conveys information across multiple channels
• Drive for Results – Motivated by goals and performance metrics
• Problem Solving – Approaches challenges with structure and persistence
• Innovation – Open to creative sourcing and engagement strategies
• Business Acumen – Understands how recruiting supports business success
The Bottom Line
Our Talent Acquisition Specialists play a critical role in connecting candidates with meaningful opportunities and supporting our clients’ hiring needs. At Velocity, your contributions matter, your effort is recognized, and your work directly impacts on the global workforce side by side with a driven, collaborative team.
