Engineering Journal Scimago Jobs in Berthoud Flexible
209 positions found — Page 4
About the Company
Be a part of a local Northern Colorado family-owned contractor that has been proudly serving the community for over 26 years. Our company specializes in commercial mechanical services and is built on a foundation of quality workmanship, long-term client relationships, and a strong team environment. We are committed to providing reliable service, professional growth opportunities, and a supportive workplace where technicians can build long-term careers while delivering high-quality solutions to our customers.
Ideal candidate must: exhibit proficiency in servicing, troubleshooting, and cleaning of heating and cooling equipment and the related systems (i.e., forced air, hydronic, split systems, package units, make up air and exhaust systems, and controls). Proficiency in start-up of new installations including pump alignment, VFDs, chillers, boilers, AHUs, and all other HVAC-related equipment. Chiller and boiler experience is a plus. Kitchen equipment such as walk-ins is also a plus.
About the Role
The Commercial HVAC Service Technician will be responsible for servicing, diagnosing, repairing, and maintaining a wide range of commercial HVAC and refrigeration systems. This position requires strong troubleshooting abilities, attention to detail, and the ability to work independently while maintaining communication with the team and management. Technicians will travel to commercial job sites, perform preventative maintenance and repairs, and ensure equipment operates safely and efficiently for our clients.
Responsibilities
- Diagnostics and repair of HVAC/R equipment.
- Installation of both soft ACR copper and ACR copper refrigerant piping using nitrogen purge and brazing techniques.
- Perform low voltage wiring, controls wiring, final tie-in’s and terminations.
- Perform start up and repair of roof top equipment, make up air units, exhaust fans, energy recovery ventilators (ERV’s), unit heaters, variable air volume terminals (VAV’s), zone dampers, furnaces, fan coil units, condensers and refrigeration equipment (walk in coolers/freezers).
- Technician is expected to be in the on-call rotation for emergencies.
Qualifications
- Valid CO Driver's License – No DUI/Suspensions for previous five (5) years
- EPA Universal Certification
- 3 – 5 years HVAC service/installation experience preferred
- Ability to use and interpret diagnostic and service equipment and tools including but not limited to meters, manometer, vacuum gauges, combustion analyzer, reclaim machines, vacuum pumps, etc.
- Ability to read, interpret and apply instructions per blueprints, specifications, sequence of operations, engineering and operations/maintenance manuals
- Attention to detail
- Thorough and accurate completion of company and manufacturer’s installation/start up paperwork
- Desire to advance both professionally and personally
Required Skills
Job Type: Full-time
Benefits
- 401(k)
- 401(k) matching
- Dental insurance
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Vision insurance
Pay range and compensation package
Ability to Commute: Loveland, CO 80538 (Required)
Ability to Relocate: Loveland, CO 80538: Relocate before starting work (Preferred)
Work Location: In person
Equal Opportunity Statement
We are committed to diversity and inclusivity.
We are seeking individuals to review and provide feedback on everyday money-management tips. This role focuses on common financial challenges such as managing expenses, reducing spending, and making smarter financial choices.
You will review examples of budgeting methods and evaluate practical ideas people use to stretch their income. The goal is to understand which approaches work best for real households.
The work is flexible and fully online. Applicants should have an interest in budgeting, saving money, or improving financial habits.
No formal finance background is required.
Remote working/work at home options are available for this role.
The SSD Firmware Test Engineer would be working for a Major Fortune 500 Company and has career growth potential.
SSD Firmware Test Engineer Highlights: • Schedule: Monday to Friday 8am-5pm • Pay Range: $45-$50 Hourly SSD Firmware Test Engineer Qualifications: • 2–4+ years of relevant experience in firmware or hardware validation.
• Experience debugging test scripts.
• Knowledge of SSD firmware and SSD product test cycles.
• Experience using Jira for test management and defect tracking.
Firmware Test Engineer Responsibilities: • Design, implement, and debug automated test scripts for SSD firmware based on design specifications and feature requirements.
• Develop and maintain grey-box, black-box, and white-box tests to validate firmware features, FTL/backend algorithms, and cross-feature interactions under realistic workloads and stress conditions.
• Execute functional, reliability, performance, and protocol-level validation; analyze results and collaborate with firmware engineers to root-cause and resolve issues.
• Own the end-to-end test development lifecycle in Jira, including test development stories, integration tasks, and defect tracking to ensure linkage between requirements, tests, and bugs.
• Collaborate with global validation teams to align coverage, reduce overlap, and support customer-facing and system-level validation scenarios.
• Contribute to improvements in validation workflows, tools, and processes to streamline SSD product test cycles and enhance defect detection efficiency.
If you are interested in this Firmware Test Engineer position, please apply to this posting with Silvana M.
at A-Line!
Salary: $90,000
- $120,000 per year A bit about us: With offices locally and across the world we are a leading provider of custom automation solutions for multiple industries! If you are an experienced Mechanical Engineer with experience designing custom, automated manufacturing equipment, then please apply! Why join us? Meaningful Work! Best in Class Organization! Competitive Compensation Package! Complete Benefits Package! Accelerated Career Growth! Fun Company Activities! Many More! Job Details Responsibilities: 1.
Lead the mechanical design of custom automation and industrial equipment, from concept through commissioning.
2.
Design mechanisms involving pneumatics, servos, motors, gearboxes, conveyors, and material handling systems.
3.
Collaborate with controls and electrical engineers to ensure seamless system integration.
4.
Support prototype builds, debug issues, and drive design improvements.
5.
Specify components, materials, and manufacturing processes.
6.
Work directly with vendors and fabricators to source and validate components.
7.
Provide technical mentorship to junior engineers and designers, fostering a culture of continuous learning and improvement.
8.
Participate in design reviews, ensuring that all solutions meet technical specifications and operational requirements.
9.
Continuously monitor industry trends, technologies, and standards, incorporating relevant innovations into our engineering processes.
Qualifications: 1.
Bachelor’s degree in Mechanical Engineering or a related field.
A Master’s degree is preferred.
2.
A minimum of 8 years of experience in mechanical design engineering in the automation or industrial equipment sector.
3.
Proficiency in SolidWorks or equivalent 3D CAD software.
4.
Extensive knowledge of mechanisms involving pneumatics, servos, motors, gearboxes, conveyors, and material handling systems.
5.
Strong understanding of manufacturing processes and material properties.
6.
Demonstrated ability to work collaboratively with multidisciplinary teams, including controls and electrical engineers.
7.
Proven experience in mentoring junior engineers and designers.
8.
Excellent problem-solving abilities, with a strong focus on quality and performance.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $40 per hour A bit about us: With numerous offices across the country we are a TOP Ranked Space Hardware Development company.
We specialize in the design, manufacture, integration, and test of critical spacecraft components.
We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications.
If you are an experienced, hands-on RF Test Technician then please apply! Why join us? Do you want to work with some of the nation’s best Clients like NASA and Boeing? We do too! Meaningful Work! Gold Level PPO Heath Insurance
- 75% Covered! Competitive Compensation Package! Benefits Package! Accelerated Career Growth! Fun Company Activities! Many More! Job Details Responsibilities: Perform RF and electronic testing, troubleshooting, and assembly on a wide range of complex electronic systems.
Use a variety of electronic equipment such as DMMs, oscilloscopes, network analyzers, power supplies, DAQs, VNA’s, Spectrum Analyzers, etc.
to conduct tests and inspections.
Implement and adhere to ESD protocols to ensure the safety and integrity of electronic components.
Use common aerospace assembly and inspection tools such as torque wrenches, load cells, feeler gauges, calipers, multimeters, etc.
Carry out soldering tasks in accordance with J-STD or NASA soldering with space addendum.
Perform harnessing tasks in accordance with IPC or NASA standards.
Document test results, prepare test reports, and maintain records for later analysis.
Collaborate with the engineering team to identify, define, and solve developmental problems.
Qualifications: 2+ years of experience as a technician, ideally in space or aerospace.
Proficiency in soldering and experience using a wide range of electronic equipment.
Familiarity with common aerospace assembly and inspection tools.
Demonstrated experience in RF testing and troubleshooting (preferred).
J-STD with space addendum certified (preferred).
IPC or NASA harnessing certified (preferred).
Strong problem-solving skills and the ability to work in a fast-paced environment.
Excellent communication skills and the ability to work effectively as part of a team.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications. This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.
The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
- Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements.
- Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions.
- Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts.
- Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies.
- Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.
Qualifications You Must Have:
- Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:
- Experience with proactive and reactive component obsolescence management methodologies.
- Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues.
- Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process.
- Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs.
- Experience with BOM (Bill of Material) development and management for developmental and production programs.
- Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions.
Qualifications We Prefer:
- Master’s Degree in Electrical Engineering or other related science or engineering discipline
- Ability to navigate multiple complex processes and tools.
- Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field.
- Ability to read and interpret engineering drawings and hierarchy definition.
- Knowledge of component failure modes by commodity
- Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs
- Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications
- Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces
- Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.
- Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations.
- Outstanding organizational, presentation and technical skills.
- Ability to multi-task and appropriately prioritize responsibilities.
- Willingness to support occasional travel.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI80414dffc879-38
Remote working/work at home options are available for this role.
Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA
Title: Machine Learning Engineer
Location: San Jose, CA
Responsibilities:
- Productize and optimize models from Research into reliable, performant, and cost-efficient services with clear SLOs (latency, availability, cost).
- Scale training across nodes/GPUs (DDP/FSDP/ZeRO, pipeline/tensor parallelism) and own throughput/time-to-train using profiling and optimization.
- Implement model-efficiency techniques (quantization, distillation, pruning, KV-cache, Flash Attention) for training and inference without materially degrading quality.
- Build and maintain model-serving systems (vLLM/Triton/TGI/ONNX/TensorRT/AITemplate) with batching, streaming, caching, and memory management.
- Integrate with vector/feature stores and data pipelines (FAISS/Milvus/Pinecone/pgvector; Parquet/Delta) as needed for production.
- Define and track performance and cost KPIs; run continuous improvement loops and capacity planning.
- Partner with ML Ops on CI/CD, telemetry/observability, model registries; partner with Scientists on reproducible handoffs and evaluations.
Educational Qualifications:
- Bachelors in computer science, Electrical/Computer Engineering, or a related field required; Master’s preferred (or equivalent industry experience).
- Strong systems/ML engineering with exposure to distributed training and inference optimization.
Industry Experience:
- 3–5 years in ML/AI engineering roles owning training and/or serving in production at scale.
- Demonstrated success delivering high-throughput, low-latency ML services with reliability and cost improvements.
- Experience collaborating across Research, Platform/Infra, Data, and Product functions.
Technical Skills:
- Familiarity with deep learning frameworks: PyTorch (primary), TensorFlow.
- Exposure to large model training techniques (DDP, FSDP, ZeRO, pipeline/tensor parallelism); distributed training experience a plus
- Optimization: experience profiling and optimizing code execution and model inference: (PTQ/QAT/AWQ/GPTQ), pruning, distillation, KV-cache optimization, Flash Attention
- Scalable serving: autoscaling, load balancing, streaming, batching, caching; collaboration with platform engineers.
- Data & storage: SQL/NoSQL, vector stores (FAISS/Milvus/Pinecone/pgvector), Parquet/Delta, object stores.
- Write performant, maintainable code
- Understanding of the full ML lifecycle: data collection, model training, deployment, inference, optimization, and evaluation.
Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
*Securian Financial Groups internal position title is Engineering Sr Analyst.
Position Summary:
Are you an experienced application developer passionate about creating impactful technology solutions? Securian Financial is seeking an Engineering Senior Analyst with 2-4 years of proven application development experience, specifically skilled in Java, Mainframe, and Informatica, to join our Life & Annuity Actuarial Systems Technology team. As a crucial member of our agile scrum team, you'll innovate, optimize data processing, and support critical actuarial systems, leveraging a diverse technology stack including AWS, Spring, SQL Server, and Oracle.
Responsibilities include but not limited to:
- Own critical business application support, promptly resolving complex production issues to ensure reliable and efficient operations.
- Drive modernization initiatives such as Application Rationalization and migration to AWS, significantly enhancing our systems' capabilities and performance.
- Become a subject matter expert in Individual Life and Annuity business processes, influencing strategic decisions and technical planning.
- Cultivate strong relationships with stakeholders and cross-functional teams, fostering collaboration and alignment.
- Lead and execute projects through detailed analysis, thoughtful design, robust development, rigorous testing, seamless integration, and successful implementation.
- Encourage innovation and creativity through a proactive test-and-learn approach, contributing actively to continuous improvement.
Qualifications:
- 2-5 years of proven professional experience in application development.
- Extensive experience (3+ years) in Java development, particularly using Spring and Spring Batch frameworks.
- Demonstrated ability to tackle and resolve complex technical challenges.
- Excellent communication and interpersonal skills, thriving in a collaborative team environment.
- Strong expertise in Mainframe systems and Informatica ETL tools.
Preferred Qualifications:
- Experience in system design and analysis.
- Expertise in Mainframe systems and Informatica ETL tools.
- Previous exposure to actuarial systems or financial services technology environments.
#LI-Hybrid **This position will have a hybrid working arrangement, working in-office for a minimum of 3 days a week.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
