Engineering Journal Jobs in Wisconsin

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

COMPANY

Terra Engineering & Construction Corporation is a civil construction company specializing in earth retention, drilling, deep foundations, dams, watercourse and marine work, underground utilities, excavating and grading. Terra also provides engineering/design build services for earth retention and deep foundation structures.

GENERAL DESCRIPTION

Terra Engineering & Construction Corporation, an employee-owned company, has an opportunity for an Assistant Project Manager based out of Madison, WI. This position will provide project management support for all aspects of civil and foundation construction. This position will have some local and regional travel and may at times require being on the jobsite full time.

DUTIES & RESPONSIBLITIES

The specific responsibilities of the Assistant Project Manager include, but are not limited to, the following:

·  Understand the terms and scope of the construction contract.

·  Coordinate subcontractor activities.

·  Track material, production, and project costs.

·  Quality control and adherence to specifications.

·  Corresponding and negotiating with the Owner and Fed/Local Agencies.

·  Maintain project schedule.

·  Attend construction related meetings to support project related functions.

·  Material and Subcontract negotiations and purchasing.

·  Basic estimating, take‐offs, solicit quotes

·  Promote safety – assist with the implementation of all applicable HSE programs, policies and procedures

·  Other duties as needed

QUALIFICATIONS

· Project management experience (2+ years) or a B.S in Construction Management or Civil Engineering with 0+ years of experience. New graduates are encouraged to apply.

·  Ability to handle multiple projects at one time and manage tight deadlines

·  Strong attention to detail

· Exceptional communication skills, both verbal and written, to collaborate with various levels of management

·  Computer software proficient specifically with estimating and job cost tracking software

SALARY RANGE

Terra offers a competitive salary range from $80,000 to $100,000 annual salary.

BENEFITS

Terra offers a competitive benefits package, including:

·        ESOP Ownership

·        401K

·        Health, Dental, Life Insurance

·        Flexible Spending Accounts

·        Long- and Short-Term Disability

·        Paid Holidays, Vacation and Sick Leave

TO APPLY

Send resume to

An Equal Opportunity/Affirmative Action Employer

COMPANY

Terra Engineering & Construction Corporation is a civil construction company specializing in earth retention, drilling, deep foundations, dams, watercourse and marine work, underground utilities, excavating and grading. Terra also provides engineering/design build services for earth retention and deep foundation structures.

GENERAL DESCRIPTION

Terra Engineering & Construction Corporation, an employee-owned company, has an opportunity for a Project Manager/Estimator based out of Madison, WI. This position will provide project management for all aspects of civil and foundation construction. This position will have some local and regional travel.

DUTIES & RESPONSIBLITIES

The specific responsibilities of the Project Manager/Estimator include, but are not limited to, the following:

• Understand the terms and scope of the construction contract
• Coordinate subcontractor activities
• Track material, production, and project costs
• Quality control and adherence to specifications.
• Corresponding and negotiating with the Owner and Fed/Local Agencies
• Maintain project schedule
• Attend construction related meetings to support project related functions
• Leading, mentoring and managing staff
• Material and Subcontract negotiations and purchasing
• Estimating, take‐offs, solicit quotes
• Promote safety – assist with the implementation of all applicable HSE programs, policies and procedures
• Other duties as needed

QUALIFICATIONS

·        B.S in Civil Engineering with 5+ years of experience

·        P.E. and/or project management experience in civil and foundations construction preferred

·        Ability to handle multiple projects at one time and manage tight deadlines

·        Ability to successfully negotiate terms and conditions

·        Excellent verbal and written communication to collaborate with internal and external stakeholders

·        Strong attention to detail

·        Computer software proficient, specifically with estimating and job cost tracking software

SALARY RANGE

Terra offers a competitive salary range from $105,000 to $140,000 annual salary.

BENEFITS

Terra offers a competitive benefits package, including:

·        ESOP Ownership

·        401K

·        Health, Dental, Life Insurance

·        Flexible Spending Accounts

·        Long- and Short-Term Disability

·        Paid Holidays, Vacation and Sick Leave

TO APPLY

Send resume to

An Equal Opportunity/Affirmative Action Employer

Job Title: Manufacturing Engineer

Location: Appleton, WI

Job-Type: Full-time

Job Description:

We are seeking a manufacturing engineer to join our dynamic production team. The ideal candidate will be responsible for improving manufacturing processes, driving operational efficiency, and supporting production operations with a focus on safety, quality, and continuous improvement. This hybrid role blends industrial engineering principles with hands-on manufacturing support, offering opportunities to work directly on the shop floor while contributing to long-term process enhancements.

Key Responsibilities:

• Develop, evaluate, and improve manufacturing processes and methods.
• Collaborate with production, quality, and maintenance teams to troubleshoot and optimize operations.
• Design, procure, and implement tools, fixtures, and equipment for manufacturing.
• Conduct time studies, workflow analysis, and line balancing to improve productivity and efficiency.
• Implement lean manufacturing principles (5S, Kaizen, value stream mapping, etc.) to reduce waste and improve flow.
• Support New Product Introduction (NPI) activities, including process validation and documentation.
• Prepare and maintain process documentation, SOPs, and work instructions.
• Track and report production metrics (cycle time, downtime, scrap, OEE).
• Participate in root cause analysis and corrective/preventive actions (CAPA).
• Contribute to continuous improvement initiatives across safety, quality, and productivity.
• Assist with layout improvements, equipment integration, and workflow optimization.
• Learn and apply ERP/MES systems for production planning and tracking.

Qualifications:

• Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or related field).
• 3+ years of experience in a manufacturing or production engineering role.
• Proficiency in CAD software (SolidWorks, AutoCAD, or similar).
• Strong understanding of lean manufacturing, Six Sigma, and continuous improvement methodologies.
• Familiarity with ERP/MES systems and production scheduling.
• Strong analytical, organizational, and problem-solving skills.
• Excellent verbal and written communication skills.
• Willingness to work directly on the shop floor and gain hands-on experience.
• Proficiency in Microsoft Excel and basic data analysis tools.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, WI

Role Overview

We are seeking an experienced Tractor Test Driver & Quality Inspector to perform structured test drives of new or serviced tractors to evaluate performance, safety, and functional quality. The role involves identifying and documenting issues related to drivetrain, hydraulics, steering, brakes, electrical systems, and overall equipment performance while collaborating with engineering and quality teams for resolution.

Key Responsibilities

• Conduct test drives of tractors across tracks, fields, and mixed terrains.
• Evaluate engine, transmission, PTO, hydraulics, steering, brakes, and 3-point hitch performance.
• Identify NVH (noise, vibration, harshness), driveline, hydraulic, and electrical issues.
• Inspect tractors for leaks, misalignments, loose components, wear, and quality defects.
• Capture CAN diagnostics and DTC data logs using OEM diagnostic tools.
• Perform pre-use safety inspections (tires, fluids, lights, seat belts, ROPS).
• Document findings and collaborate with engineering, quality, and service teams for root cause analysis.

Required Qualifications

• High school diploma or GED (tess

Preferred Certifications

• OSHA 10/30
• Forklift or mobile equipment certification
• First Aid / CPR

Manufacturing Operations Manager

Our Manufacturing Operations Manager oversees execution of manufacturing, and production for the plant which includes safety, productivity, labor, cost, production schedule, quality, and continuous process improvements to meet established business goals. Plans and coordinates efficient and economical manufacturing activities and provides quality levels and service that exceed the customer’s expectations. Responsible for driving key initiatives to ensure cost reduction, inventory management, delivery performance, and key performance indicator (KPI) targets.

What will you be doing -

• Oversee and manage all manufacturing activities to ensure safety, quality, cost, and morale and to meet and exceed customer and Company requirements.
• Assist General Manager in the development and management of annual plan, budget, operating and capital expense budgets, Key Performance Indicators (KPI), operating efficiency, and cost control.
• Coordinate and guide activities in the areas of manufacturing, Lean, 5S, quality enhancements, staffing, training, and employee relations. Manage production supervisors.

What are we looking for -

• Bachelor’s Degree in Manufacturing, Industrial, or Operations Management; Mechanical, Industrial or Manufacturing Engineering; Supply Chain; Business Administration; or related field preferred but not required.
• 7-10+ years of manufacturing (i.e., assembly, cutting, fabrication, welding, painting, etc.) experience.
• 5+ years of progressively responsible manufacturing supervision/management experience.
• Practical experience applying Lean, Continuous Improvement, and Total Quality Production System (TQPS) principles in a manufacturing environment preferred.
• Experience with manufacturing and production KPIs/Analytics including the Production Efficiency (PEFF) system preferred.
• Experience with ERP/MRP systems and integrated computer programs and applications.

4Front Engineered Solutions is a leader in the door and docking industry. This role supports High Performance Doors, under the brand names Dynaco, Albany, and TKO, on-site at our Kenosha, WI facility.

What we offer -

• Medical, dental and vision insurance (HSA includes company contribution)
• STD, LTD, Life and AD&D insurance
• 401k including company match
• Variable compensation bonus plan paid out quarterly
• Reimbursement for select PPE
• 11 paid holidays
• 3 weeks of PTO per year, accrued with each bi-weekly payroll cycle

Why apply?

• Empowerment: You’ll work as part of a global team in a flexible work environment, learning and enhancing your expertise.
• Innovation: You embrace challenges and want to drive ambitious change.
• Integrity: You are results-oriented, reliable, straightforward and value being treated accordingly.

If you are interested or know someone who may be interested in working for a premier employer or want more information, please contact John Vandenberg at , 262-496-5374.

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

Are you a mechanical engineer who enjoys solving real-world problems, working hands-on with products, and contributing to designs that improve safety and performance? Join Rite-Hite's engineering team and help evolve our industry-leading vehicle restraint systems - including our flagship Dok-Lok product line.

This role offers a mix of product design, problem solving, and project-based work, with opportunities to contribute across product improvements, cost initiatives, and new development efforts as our roadmap evolves.

• Design and develop mechanical and structural components for vehicle restraint systems and related products

• Create and modify 3D models, assemblies, and drawings using SolidWorks (or similar CAD tools)

• Support product changes, enhancements, and new development projects across the product lifecycle

• Collaborate with product management, manufacturing, supply chain, and testing teams to bring designs from concept through release

• Select materials and components with consideration for performance, cost, and manufacturability

• Participate in prototype builds, testing, and validation activities to ensure designs meet real-world requirements

• Contribute to continuous improvement initiatives, including cost reduction (VAVE) and design optimization

• Own small engineering projects or workstreams, helping drive progress from problem definition to solution

• Bachelor's degree in Mechanical Engineering or a related field

• 2-3 years of post-graduation engineering experience in product design, development, or project-based engineering work

• Hands-on experience designing metal components and fabricated parts (e.g., machined parts, structural components, weldments, brackets)

• Proficiency in 3D CAD (SolidWorks preferred; Creo or similar acceptable)

• Experience working on cross-functional engineering projects - beyond routine ECN-only work

• Strong problem-solving skills and a practical, detail-oriented engineering mindset

• Ability to communicate effectively and collaborate across disciplines

• Experience with moving or mechanical systems (e.g., mechanisms, linkages, actuators, rotating components)

• Exposure to new product development (NPD), VAVE, or stage-based project workflows

• Experience with testing, validation, test plans, or tools such as DFMEA/FMEA

• Familiarity with electromechanical systems or working alongside electrical engineers

• Work hands-on with physical products in an R&D and test lab environment

• Contribute to a mature but evolving product line with a clear roadmap and room for innovation

• Be part of a flexible, collaborative engineering team where responsibilities may vary year to year

• Gain exposure to a range of engineering work - from product improvements to early concept support - depending on business needs

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Job Description:

• The Associate Manufacturing Engineer will design new, modified, or improved components/process tooling in accordance with engineering standards and project scope of work.
• This role will be an entry level role within the operations engineering organization to gain knowledge and skills in providing engineering support to various manufacturing processes.

Responsibilities:

• These duties are not meant to be all-inclusive and other duties may be assigned.
• Under close supervision, perform basic engineering calculations, investigations, and tasks as assigned according to Client's engineering standards and processes.
• Support more senior engineers in the preparation of plants, designs, computation methods, and reporting.
• Work on projects with limited complexity in a support role.
• Prepare vehicle layouts and component part drawings with supporting calculations (i.e. weight distribution etc.).
• Select parts and/or design components for cost and quality-consciousness.
• Follow project on the assembly floor or through prototype build when instructed by supervisor and render assistance as necessary.
• Generate bills of material and assembly drawings as required by the project.
• Adhere to time schedules.
• Utilize engineering tools (CAD) equipment in assigned projects.

Requirements:

• Experience with CAD modeling software, 3D
• Familiarity with mechanical designing
• Familiarity with applying material science within a design
• Strong mechanical background.
• Manufacturing facility exposure.

Preferred:

• Internship in a relevant engineering space.
• Knowledge of equipment manufacturing industry or automobile industry.
• Experience with Lean and/or Six Sigma tools.
• Experience in Microsoft Office Suite; including a strong emphasis on Excel.
• Analytical and problem-solving skills.

Education:

• Bachelor's degree in Engineering (mechanical preferred) or related field or an equivalent combination of education and experience.