Engineering Journal Jobs in West Nyack, NY

The Rockland County Department of Highways, Drainage Division, is seeking a Director of the Drainage Agency. The work is specialized diverse, and complex in nature.

This is administrative and managerial work of a complex nature that involves responsibility for developing and implementing policies and procedures to implement safe, efficient and modern stream maintenance and drainage programs. The work is performed under the general direction of the Superintendent of Highways and in accordance with Federal and New York State applicable laws and regulations and Rockland County objectives and policies. Supervision is exercised over professional and technical employees. Develops policies and procedures with respect to drainage programs and makes recommendations to the Superintendent of Highways regarding same. Arranges for the engineering, construction, improvement, repair and maintenance of County streams, water courses, drainage courses, and tributaries and ensures that services are in compliance with policies and regulations. Oversees the administration of drainage-related capital projects, including but not limited to monitoring funding, supervising contract bid processes, ensuring compliance with regulations and project requirement. Responds to emergencies (e.g. severe flooding) by inspecting and monitoring flooding and related conditions, acting as liaison with County officials and first responders to exchange information and resolve problems, preparing reports regarding flood damage and related conditions in order to obtain New York State and Federal funding. Completes applications and prepares documents to secure New York State Department of Environmental Conservation (DEC) permits, as needed, regarding dam safety, streams, aquatic habitats, wetland programs, etc. Acts as liaison to a variety of governmental agencies and units of government, as needed, including but not limited to the Army Corp of Engineers, the New York State Department of Environmental Conservation, towns and village, etc. Approves plans, specifications and estimates for construction, maintenance and repair of stream watercourses and tributaries. Directs the control of trees, brush and weeds within the bounds of County streams. Plans and directs a program to inform residents about the programs and functions of the Drainage Agency. Oversees the Drainage Agency’s permit application process and ensures compliance with the Rockland County Stream Control Act as it applies to activities within areas under the jurisdiction of the Drainage Agency. Plans and directs a Stream Maintenance program, maintains records and makes reports. Acts for and in place of the Superintendent of Highways with respect to drainage matters, as needed. May provide legal opinions regarding Federal, New York State, and Rockland County laws that pertain to drainage matters. May inventory and purchase machinery, equipment and materials.

Thorough knowledge of New York State Department of Environmental Conservation requirements and regulations, thorough knowledge of general practices and regulations regarding stream maintenance and general construction procedures. Good knowledge of administrative procedures and techniques, especially as they pertain to a comprehensive modern stream maintenance and drainage programs, ability to plan, develop and implement general policies and procedures for a modern and efficient stream and drainage system, including stream maintenance and construction. Ability to establish and maintain cooperative relationships with others, including elected officials and Federal and New York representatives. Have the ability to understand and interpret laws and regulations that pertain to drainage-related matters. Ability to effectively communicate, both orally and in writing Also does related work as required.

Minimum Qualifications:

• A Bachelor’s degree or higher in Civil Engineering, Civil Engineering Technology, Environmental Engineering, or comparable curriculum or;
• A New York State license to practice law and
• Four (4) years of post-degree supervisory, administrative or management experience that substantially involved responsibility for drainage and/or environmental programs and projects (e.g., development of policies and procedures, supervision of staff, enforcement, providing legal opinions and/or litigating related matters, overseeing the implementation of programs and projects, etc.).

Other Requirements and Information:

• Must be a Resident of Rockland County.
• This is a competitive position in Civil Service and reachability on an eligible list following a civil service examination would be a requirement for permanent appointment.

Salary and Benefits:

Salary and benefits are competitive with the public sector market including but not limited to the following:

• $122,000.00 Annual Salary (as of January 1, 2026)
• 40 Hour work week
• Medical, Dental and Vision
• Time off including vacation, personal and holiday time
• New York State Pension eligibility
• Other benefits, including, but not limited to deferred compensation, tuition reimbursement, leadership and other professional development training

How to Apply:

Interested candidates should email a completed Rockland County employment application, to

Click here to access the online application.

Position open until filled.

• 
  
• Perform assembly-type functions using hand and power tools.
  
  
• Read and interpret mechanical drawings, blueprints, and work instructions.
  
  
• Operate press brake, fastener machine, and index machine as required.
  
  
• Install wiring, lights, and hardware assemblies.
  
  
• Operate forklifts, cranes, and other shop equipment.
  
  
• Conduct visual inspections and ensure compliance with quality standards.
  
  
• Train and oversee assemblers (Lead level).
  
  
• Coordinate workflow and safety (Lead level).
  
  
• Perform other related duties as assigned by the supervisor.
  
  
• Ability to use measuring devices accurately.
  
  
• Strong math aptitude, including fractions and decimals.
  
  
• Basic computer navigation and documentation skills.
  
  
• Strong attention to detail and organizational ability.
  
  
• Critical thinking and problem-solving ability.
  
  
• Commitment to following company safety and operational procedures.
  
  
• Ability to lead, train, and evaluate other employees in assembly techniques (Lead level).
  
  

• 
  
• Associate Level: 1-2 years of related mechanical assembly experience.
  
  
• Staff Level: 2-4 years of professional mechanical assembly or fabrication experience.
  
  
• Lead Level: 5+ years of progressive experience in mechanical assembly, including supervisory or lead responsibilities in a manufacturing or defense environment.
  
  
• High School Diploma or GED required.
  
  
• Technical or vocational training in Mechanical Engineering or Manufacturing preferred.
  
  
• Associate's Degree in Mechanical Engineering from an accredited institution is a plus.
  
  

We are looking for a skilled Technical Project Manager to lead product development initiatives from initial concept through launch. This role serves as the central connector between engineering, design, and business teams—ensuring clarity, alignment, and smooth execution throughout the full development cycle.

Responsibilities

• Define what the product must deliver and ensure requirements are clearly communicated across technical and non-technical teams.
• Guide projects from early concept through final launch, ensuring products meet quality, performance, and timing expectations.
• Translate complex technical challenges into clear direction for cross-functional partners while supporting select hands-on technical activities when needed.
• Develop and maintain detailed project schedules, ensuring milestones stay on track with internal goals and retailer timelines.
• Facilitate strong communication and alignment across global teams, providing ongoing visibility into project status, risks, and decision points.
• Prepare and deliver project updates to senior stakeholders, including recommendations, trade-offs, and key risks.
• Collaborate with engineering and project teams to ensure solutions meet both technical feasibility and business needs.
• Work in a fast-paced environment that values flexibility, problem-solving, and cross-functional collaboration.

Qualifications

• 3+ years of experience in project management or engineering, ideally within consumer products, plastics, or hardware development.
• Proven success managing full product lifecycles—from concept through production and launch.
• Strong technical foundation with an understanding of engineering principles, manufacturing processes, and product constraints.
• Ability to clearly communicate complex technical information to diverse stakeholders.
• Proficiency in Microsoft Office; familiarity with CAD tools such as SolidWorks or CREO is a plus.
• Experience presenting to senior leadership; exposure to executive-level communication is beneficial.
• A proactive, hands-on approach with the ability to adapt quickly and work collaboratively across teams.

Salary Range (commensurate with experience)

$130,000 - $135,000 USD

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Manufacturing Engineer acts as the bridge between Engineering and Production, owning all aspects of process definition, manufacturability, and continuous improvement for MetroWall’s glass partition, door, and framing systems.

RELOCATION ASSISTANCE NOT AVAILABLE.

Responsibilities

Process Design & Standardization:

• Develop, document, and maintain manufacturing processes for aluminum and door assembly operations
• Create Standard Operating Procedures (SOPs), setup sheets, visual work instructions, and tool/fixture lists
• Define operation sequences, routing steps, and cycle times in ERP (Epicor/Kinetic)
• Establish and maintain machine capability matrices, ensuring processes align with equipment limitations

Design for Manufacturability (DFM):

• Participate in NPI and R&D project reviews to ensure designs are manufacturable within MetroWall’s equipment and process constraints
• Collaborate with Product Design Engineers to optimize part geometry, tolerances, and hardware selection
• Approve manufacturability sign-offs prior to product release (NPI Phase Gate)

Process Improvement & Cost Reduction:

• Analyze production performance data to identify waste, bottlenecks, and rework causes
• Implement Kaizen and lean initiatives
• Lead trials to validate improved processes, new jigs, or revised toolpaths

Collaboration & Support:

• Work closely with Production Managers to ensure practical implementation of processes
• Support Production Engineers during complex custom projects or prototypes
• Serve as a technical escalation point for production issues

Document & Revision Control:

• Maintain all process documentation under version control (aligned with Engineering ECO system)
• Link controlled documents to Epicor Work Orders and routings
• Audit shop floor adherence to latest revision

Safety & Compliance:

• Ensure compliance with OSHA and internal safety standards
• Integrate safety instructions directly into work procedures

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
• 3+ years of manufacturing experience (preferably architectural aluminum/glass or similar fabrication).
• Hands-on understanding of CNC machining, cutting, drilling, and assembly operations.
• Familiarity with Epicor/Kinetic, AutoCAD/Inventor, and Lean manufacturing tools.
• Strong documentation and communication skills.
• Ability to work cross-functionally between Engineering and Production.
• Strong organizational abilities to manage multiple tasks and projects simultaneously. Skilled in identifying issues, analyzing options, and implementing effective solutions in a timely manner.
• Keen attention to detail with a commitment to producing high-quality work, ensuring accuracy and precision in all tasks.

Work Environment

• Office & Field

Additional Responsibilities:

• Work with all members of the MetroWall team to deliver a level of customer service that exceeds the expectations of our customers
• Assist sales team personnel in selecting solutions for clients
• Continuously improve existing/new internal processes and deliverables
• Obtain thorough understanding of MetroWall products and their capabilities in order to provide support to other teams/team members

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

Requirements

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.
• Preform other duties as assigned.

What We Offer?

• Competitive wage (based on experience) plus Time and a half for Overtime.
• Union Shop.
• Medical, dental, vision, life, short-term and long-term disability coverage.
• 401(k).
• Uniforms provided with laundry services.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Schedule:

Overnight Wednesday to Sunday 6pm to 5am.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

• Performs all work in accordance with established safety procedures. 
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.  
• Assists in the repair and adjustment of equipment.  
• Washes vehicles and equipment.  
• Conducts safety checks on vehicles.  
• Assists with service calls for breakdowns.  
• Perform other maintenance related work as required. 
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. 

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.Preform other duties as assigned.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

This position is for the Overnight Shift 2am - 1030am Monday to Friday

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets.  This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet.

Advanced Diagnostics & Complex Repairs

• Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:
• Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems).
• CAN-bus and multiplex electrical systems, electronic control modules, and communication networks.
• Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs.
• Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds.

Technical Leadership & Training

• Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks.
• Assist in training on:
  • Diagnostic software and tools.
  • New equipment technology, safety systems, and telematics.
  • Company maintenance standards, PM strategies, and repair procedures.

Fleet Reliability, Compliance & Continuous Improvement

• Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications.
• Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT.
• Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC).

Operational & Customer Support

• Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area.
• Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets.
• Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety.

Administrative & Leadership Duties (as assigned)

• Help plan daily shop workload and allocate jobs according to technician skill level.
• Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts.
• Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop.

• High school diploma or GED required; additional technical training strongly preferred.

• A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul.
• CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads.

• Demonstrated expert-level knowledge of:
  • Heavy truck and refuse systems.
  • Refuse hydraulic, electrical, and powertrain systems.
  • Diagnostic software, scan tools, and OEM service information.
• Proven track record of performing complex diagnostics and repairs independently.
• Must provide own professional-grade tools required for diagnostic and repair work.
• ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred.
• Possession of a valid driver’s license is required.
• Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred.
• Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred.
• Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Electrical Contractor located in Northern Bergen County, NJ seeking a full-time Estimator/Project Manager for commercial projects varying in size throughout the NYC and Tri-State Areas.

ROLE OVERVIEW

• Interpret job bid instructions, technical specifications, and architectural construction prints that are necessary in creating accurate electrical pricing for projects.
• Maintain and log incoming/outgoing bids and meet the deadlines for providing pricing to customers.
• Process and distribute critical/technical information and procured material to the labor force actively building projects.
• Preparation and maintenance of RFI/CO logs over the course of an active project.
• Full-time, in person role
• Work hours: 7:00am – 4:30pm

REQUIREMENTS AND QUALIFICATIONS:

• Four-year degree minimum.
• Degree in engineering/construction is a plus.
• Prior experience in the construction industry is a plus.
• Interest in the Construction and Project Management Field.
• Familiarity with Accubid, AutoCAD, and Bluebeam software is a plus.
• Strong mathematical, mechanical, and technical aptitude.
• An interest and passion for problem solving as it relates to real life construction projects.
• Organizational skills, time management, and willingness to learn are required.
• Must have good communication skills to effectively engage in project meetings with other subcontractors, general contractors, and design professionals.
• Should have strong confidence in speaking either on the phone or in person on a regular basis to vendors, customers, and labor force.
• Must be self-motivated and be able to follow through with a project/estimate from beginning to end with intensity, passion, and pride for their own work.
• Be dependable, self-motivated, and able to function independently with little supervision.
• Enjoys the challenges of an intense, creative, and fast paced industry with opportunity for self-made growth.
• Fluent in English.
• Not a fit for those with a desire to be involved with engineering/architecture design.

BENEFITS:

• Medical - Company pays 75%
• Dental – Company pays 50%
• Life – Company pays 50%
• Holidays
• Vacation
• 401k
• Profit sharing

About us:

We’re Five Star Millwork — a fast growing millwork & trim work company based in Pearl River, NY, with a reputation for exceptional craftsmanship and attention to detail. From high-end millwork to custom kitchen installations, we take pride in delivering work that’s built to last. Our sister companies, Master Trimmer and Five Star Kitchen Design Center, work hand-in-hand to bring beautiful residential and commercial spaces to life.

The Role:

We're looking for an Estimator with specific finish carpentry experience who is ready to work in a fast-paced culture. The Finish Carpentry Estimator will be responsible for all aspects of preparing hard bid construction cost estimates. Responsibilities include plan take-offs, estimating, proposal preparation, negotiations, pre-construction coordination, client relations, and bid tracking. If you are a self-motivated Estimator with sound judgement, strong communication/interpersonal skills, and confidently develops accurate construction bids then we would love to hear from you! Ideally, you will possess knowledge in construction means and methods, costs, and engineering principles to hit the ground running.

The Responsibilities:

• Read and interpret project documents, understand project logistics, understand project schedule, and develop scopes of work.
• Perform detailed and accurate quantity takeoffs and obtain material pricing.
• Work with Five Star Millwork LLC management and field operation teams to estimate labor production rates, identify project efficiencies, and identify alternate approaches.
• Attend client pre-bid meetings, visit project sites, take notes, and assess site-specific conditions.
• Submit and follow up pre-bid requests for information.
• Prepare bids itemized by specification section and detailed into labor, material, equipment, subcontractor, and overhead costs.
• Present bids to management, succinctly explaining estimate details and project specifics.
• Prepare accurate and competitive hard bid construction cost estimates and submit formal proposals in a timely manner.
• Maintain detailed and orderly project files, adhering to Five Star Millwork quality standards.
• Follow up on bid results.
• Build relationships with clients, contractors, and vendors.
• Perform pier reviews of estimates and proposals. Troubleshoot and resolve estimate issues.
• Maintain past performance databases and spreadsheets.
• Research data on industry standard labor production rates and material costs.
• Maintain the bid board, bid tracking logs, customer history, and material management.
• Identify and recommend improvements to the bidding process.
• Maintain professional & technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.

What you bring:

• Bachelor’s degree in Engineering, Architecture, Construction Management, or 10 years’ experience carpentry construction.
• Strong interpersonal and communication skills with the ability to develop and maintain a business relationship with clients and vendors.
• Experience estimating commercial and residential carpentry projects that include finish carpentry, and doors.
• Knowledge of applicable codes and standards.
• Experience with estimating takeoff software.
• Experience estimating construction projects $10,000 to $5,000,000.
• Proficient in Microsoft Windows, Word, Excel, PlanSwift and Quickbooks.
• Superior written and oral communication skills.

Benefits:

• Casual yet professional environment
• Competitive pay
• Paid vacation and holidays
• A yearly review
• Co-workers you enjoy working with

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio!  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. 

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. 

Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns.

• Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)
• Performs repairs and assigned preventative maintenance services.
• Estimates time and material cost on vehicle repairs and requisition of new parts.
• Conduct safety checks on vehicles.
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time.
• Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports.
• Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards.
• This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.
• Assists Sr. Technicians in the completion of project work.

Work Environment

• Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times.
• Only during breakdowns will this position be required to enter transfer station loading/ dumping area.
• The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required.

Requirements

• Applicants must be at least 18 years of age and legally eligible to work in the United States.
• A valid driver’s license is required. CDL a plus.
• At least 5 years of experience in job duties.
• Sanitation or construction industry experience a plus.
• Computer diagnostic experience as diesel technician a plus.
• Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.
• Working knowledge of applicable DOT and OSHA standards and regulations.
• Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.
• Must be able to meet the physical and safety requirements of the position.
• Must be able to provide own tools

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.