Engineering Journal Jobs in Warminster Pennsylvania

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

About Precis

Precis Engineering + Architecture (Precis) is a 150+ person consulting firm with offices in Ambler, Pa., and Cary, N.C., offering comprehensive design services. Precis has been repeatedly recognized as a Best Place to Work by the Philadelphia Business Journal.

Position Overview:

The Automation Engineer supports the Ambler, Pa., office with 3 years or more of experience in the design and implementation of industrial automation systems for the pharmaceutical + biotechnology, chemical, and/or building systems markets. This individual must have a strong engineering background and an understanding of instrumentation, control, and automation systems hardware and software design, testing, and implementation. Experience in Allen Bradley PLCs, Siemens Building Automation Systems, and/or the DeltaV DCS platform is preferred.

The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. The individual will be responsible for generating automation-related project deliverables such as P&IDs, loop sheets, control panel designs, instrument specifications, software specifications, testing protocols, and corresponding narratives and reports.

Key Responsibilities:

• Knowledge in design and implementation for process, utility, and building automation systems.
• Experience with major automation system vendors including Allen Bradley, Siemens, Honeywell, ABB, and Emerson.
• Familiarity of systems integration technologies and approaches.
• Experience in automation system implementation/migration projects and upgrades required.
• Knowledge of cGxP requirements as they relate to automation systems preferred.
• Present automation system designs at client meetings.
• Interface with third-party control system vendors.
• Develop new clients, maintain and expand the relationship and scope of work with existing clients.

Competencies

• Automation systems hardware and software
• Industrial and process instrumentation
• Strategic thinking, problem solving, and analysis
• Customer/client focus
• Communication proficiency
• Time management

Qualifications

• B.S. in Chemical, Electrical, or Mechanical Engineering or related major required.
• Minimum of 3 years of experience in the field.
• The ability to work well with others, lead a team, and manage in matrix teams and environments with multiple clients.
• Experience in automation systems design and implementation.
• Experience in industrial and process instrumentation types, technologies, and specification.
• Effective presentation, written, and verbal communication skills.
• Excellent organizational, planning, and time management skills.
• Logical thinking with creative problem-solving skills.
• Familiar with a variety of the field's concepts, practices, and procedures.

Why Join Precis?

• Be part of a collaborative, innovative team that values your ideas and expertise.
• Shape growth for a respected, specialized engineering and architecture firm.
• Enjoy a flexible, supportive work environment and competitive compensation package.

Equal Opportunity Employer

Precis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.

Overview & Purpose

Precis Engineering is seeking a mid-level Process Utilities Engineer with 5 years or more of experience focusing on the design and implementation of Clean Utility Systems (WFI generation and purified water systems) and Equipment Cleaning in Place (CIP) systems for the pharmaceutical, biotechnology, and/or chemical industries. This individual must have a strong engineering background and a thorough understanding of equipment design, CIP design, US Pharmacopia and BPE standards.

The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. Process is a young business endeavor for Precis and this individual will have an entrepreneurial and strategic mindset towards the long-term growth and viability of the group. He/she will be comfortable in a process execution role as well as representing the process discipline as a technical resource on larger, multi-discipline project teams. The individual will work be responsible for generating process-related project deliverables such as P&IDs, utility diversity calculations, user requirements, equipment specifications, piping design, and corresponding narratives/reports.

Responsibilities

• Responsible for execution and coordination of multi-discipline engineering teams for process projects comprised of Precis, client, and third-party personnel.
• Work in conjunction with a subject matter expert in design and implementation for process and clean utilities for pharmaceutical manufacturing clients.
• Experience with major clean utility and Cleaning equipment manufacturers.
• Prepare and review systems calculations, drawings, and specifications.
• Familiarity of instrumentation and automation and control approaches.
• Knowledge of cGMP requirements with respect to operations and manufacturing facility design.
• Ability to communicate and articulate process design deliverables and convey the project needs to complete construction drawing deliverables to clients and partners/
• Be able to manage work to a budget and schedule and report status to project oversight.

Qualifications

• B.S. in Chemical Engineering or related major required.
• Minimum of 5 years of experience in the field.
• The ability to work well with others, lead a team and manage in matrix teams and environments with multiple clients.
• Experience in process utility design and implementation.
• Experience in process deliverables such as Process Flow Diagrams, P&IDs, piping drawings and equipment specifications.
• Experience with AutoCAD and Revit drafting software.
• Delegation negotiating, and team skills.
• Effective presentation, written and verbal communication skills.
• Excellent organizational, planning, and time management skills.
• Logical thinking with creative problem solving skills.
• Understanding of budget control.
• Familiar with a variety of the field's concepts, practices, and procedures.

Competencies

• Process Engineering with a Focus on Process Utilities & CIP Equipment
• Specification of Process Equipment and Instrumentation
• Strategic Thinking/Problem Solving/Analysis
• Customer/Client Focus
• Communication Proficiency
• Time Management

Education / Licenses

• BS degree in Chemical Engineering or related
• Professional Engineer (PE) License, or FE Preferred

Mechanical Design Engineer

$80,000 - $110,000 + Quarterly Bonuses + Progression to Management + PTO + Holiday + Medical + Dental + Vision + Life Insurance + 401K + Other Excellent Benefits.

Langhorne, Pennsylvania (Commutable from Philadelphia, Doylestown, Newton, Hatboro, Levittown, Morrisville, Bristol, Cherry Hill, Princeton, Trenton).

Are you a Mechanical Design Engineer from an Industrial Manufacturing background, ready to take the next step into a high-impact technical leadership role, where you'll have the autonomy to fully own and drive the mechanical design process?

This is a standout opportunity to establish yourself as the go-to expert for mechanical design, with clear progression into management or senior leadership, in addition to competitive quarterly bonuses and comprehensive training on machinery unique to the business.

Now is the time to join this industry leading organization, at a cutting edge, state-of-the-art manufacturing facility. Renowned for their quality, innovation, and employee development, you'll play an integral part in continuing their legacy as a market leader, whilst growing your own horizons both personally and professionally.

In this role, your expertise will be instrumental in the design and optimisation of mechanical powertrain systems and components. You will take ownership of designing fabricated weldments and precision-machinery, whilst applying FEA to assess structural, thermal, and vibration performance. You'll work closely alongside engineers, vendors, and cross-functional teams, to produce manufacturing drawings, support component selection, and deliver solutions that meet performance, reliability and manufacturability targets.

This role would suit a Mechanical Design Engineer with Industrial Manufacturing experience, looking to step-into a high-impact technical leadership role with extensive growth potential and progression towards senior leadership.

The Role:

• Design and optimise large-scale industrial equipment and mechanical powertrain components.
• Perform mechanical system analysis (including FEA) and produce detailed manufacturing drawings.
• Collaborate with engineers, project teams, and vendors to specify components and ensure designs meet manufacturing requirements.

The Candidate:

• Strong mechanical design background with proficiency in 3D CAD (Autodesk Inventor preferred) and Finite Element Analysis.
• Solid understanding of mechanical systems (including pneumatics), ideally with experience in industrial equipment, automation, or robotics.
• Degree qualified (Bachelors).

To apply for this role or to be considered for further roles, please click \"Apply Now\" or contact Oliver George at Rise Technical Recruitment.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

Mechanical Design Engineer, Mechanical Engineer, Design Engineer, Mechanical Design, Design, Mechanics, FEA, Finite Element Analysis, Weldments, Precision Machining, Mechanical Powertrains, Mechanical Components, Autodesk, SolidWorks, CAD, 3D CAD, Engineering, Langhorne, Pennsylvania.

Company Description

Sojo Industries ("Sojo") is an industrial automation company that utilizes robotics, mobility, and modularity to deliver efficient packaging and assembly solutions to the food and beverage industry.

Sojo has built and designed a sophisticated SQF-compliant facility in Pennsylvania ("Sojo Sprint") across its eight automated lines to support a variety of packaging materials such as registered shrink, top loaded boxes, and side loaded cartons to name a few. In addition, Sojo utilizes its proprietary mobile manufacturing offering, "Sojo Flight", to eliminate freight costs, labor costs, packaging costs and harmful emissions while delivering on-site packaging services.

The Sojo team is comprised of seasoned executives and operators from the food and beverage industry and customers include several Fortune 500 brands, distributors, and manufacturers.

Job Role

The Production Manager will report directly to the Regional Plant Director. They will be responsible for managing operations at customer facilities. This position will oversee the training, production, and performance of the assigned Flight operation.

Responsibilities

• Daily production measured by output per day and machine uptime
• Daily scheduling of production based on weekly capacity plan
• Daily management of forklift operations to support production activity
• Daily management of ERP and WMS system related to line production
• Setup of new locations based on engineering and design parameters following FAT
• Management of team performance based on metrics and KPIs across multiple locations
• Maintain and track daily labor hours by line associate to support invoice reconciliation
• Support and coordination with capacity planning and scheduling functions
• Maintain and follow all local site safety and quality related functions
• Training of production team in areas of production lines, robotics, and quality control
• (Oversight) Ordering all warehouse supplies (PPE, glue, shrink wrap, etc.)
• Management of spare parts and supplies
• Engage with Sojo Maintenance on routine and ad-hoc maintenance and repair

Job Type: Full-time

Salary: $85,000.00 - $100,000.00 per year

Benefits:

• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Schedule:

• 10 hour shift
• Day shift
• Monday to Friday
• On call
• Weekends as needed
• Availability to rotate 1st, 2nd, and 3rd shift

Supplemental pay types:

• Bonus opportunities

Experience:

• Production management: 4 years (Required)
• Management: 4 years (Required)

Description:

The Director of Operations will oversee all production and facility operations at ALIGN Precision Philadelphia, ensuring seamless execution across precision machining, assembly, and cleanroom environments. This role will serve as the operational hub, coordinating with the Director of Planning & Delivery and Director of Quality to deliver on customer commitments while driving efficiency, safety, and culture. Reporting directly to the Site General Manager, the Director of Operations will translate strategic goals into daily execution and long-term capability building.

Essential Duties and Responsibilities:

Production & Facilities

• Provide leadership to a staff of Production Supervisors and CNC Programmers.
• Lead machining, CNC programming, assembly, and cleanroom operations.
• In cooperation with the Director of Maintenance, oversee facilities management, equipment utilization, and preventive maintenance.
• Ensure Safety, Quality, Delivery, and Cost targets are consistently achieved.
• Develop the operations and capital equipment budget.
• Champion 5S workplace organization.

Scheduling & Capacity Planning

• Develop daily plans and execute production schedules against the master schedule.
• Cooperate with Planning and Delivery through the SIOP process providing inputs into capacity planning and modeling, aligning with the supply chain and customer demand.
• Partner with Planning and Delivery to balance inventory strategies with operational readiness.
• Collaborate with Quality and Engineering to embed process controls and ensure compliance.

Continuous Improvement

• Drive Lean, Six Sigma, and Kaizen initiatives across production areas working closely with Engineering.
• Implement systems for performance metrics, accountability, and operational transparency.
• Champion waste reduction, cycle time improvement, and productivity gains.

Culture & Leadership

• Build a culture of engagement, accountability, and innovation.
• Mentor supervisors and team leads, fostering psychological safety and high performance.
• Facilitate employee engagements and cross-functional collaboration to surface systemic themes.

Cross-Functional Alignment

• Act as the connective agent between Planning and Delivery, Quality, Engineering, Program Management and Business Development.
• Support business development by ensuring operational readiness of our expanded cleanroom and CNC automation for new verticals.
• Collaborate with leadership to embed strategic operating systems across the enterprise.

Qualifications:

• Bachelor’s degree in Engineering, Operations Management, or related field.
• 10+ years of leadership experience in precision machining, semi-conductor, aerospace, medical devices, or advanced manufacturing.
• Proven success in production leadership, scheduling, and facilities management.
• Strong background in Lean, Six Sigma, and operational excellence.
• Excellent leadership, communication, and team-building skills.
• Ability to balance strategic vision with hands-on execution.

Other Skills Required:

• Communications - Exhibits good listening and comprehension.

• Business Acumen - Understands business implications of decisions; displays orientation to profitability; demonstrates knowledge of market and competition. Aligns work with strategic goals.

Language Skills:

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

Mathematical Skills:

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Reasoning Ability:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills:

To perform this job successfully, an individual should have an understanding of Microsoft Office Software- especially knowledge of Microsoft Word and Microsoft Excel.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee will be in the office and shop and required to sit, stand and walk.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ADDITIONAL NOTES:

ALIGN Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN Precision are employed on an at-will basis.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

• CNC Machinist capable of running both Lathes and Mills
• Candidate should be proficient in operating various machine/control configurations and have experience in the manufacture of tool and die parts.
• Works with minimal supervision
• Setup tooling and specified cutters as required
• Perform simple programming changes and edits to maximize productivity, and read and interpret Engineering drawings
• Perform frequent checks of parts to ensure dimensional requirements are met
  

• Setup of machine including parts and tooling
• Make modifications to programs where needed
• Verify first part qualification
• Perform preventative maintenance to equipment including daily, weekly and monthly maintenance and checks
  

• Minimum of 3-5 years experience operating both Mills and Lathes, great training opportunity for the mechanically inclined.
  

• Lifting and carrying of parts and or fixtures weighing from 2-100 lbs frequently
• Operate machine controls positioned 4-5 feet from shop floor
• Able to perform at work benches set at 36-40 height
• Standing and walking continuously for 8 hours per workday
• Forward bending required while loading and unloading machine and operating controls
• Move carts containing parts weighing up to 200 lbs.
  

In our 'always on' world, we believe it's essential to have a genuine connection with the work you do.

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products

.

We’re looking for bold thinkers and exceptional builders—engineers who thrive in highly technical environments and want to design hardware that powers the connected world. If you enjoy solving tough engineering challenges, collaborating with a talented cross‑functional team, and owning designs from concept through production, this is the role for you.

How You’ll help us connect the world:

As a Power Hardware Engineer reporting to the Sr. Manager of Hardware Engineering, you will play a key role in architecting and developing stand‑alone and embedded power supplies for indoor and outdoor CATV/networking equipment. You’ll work hands‑on across the entire product lifecycle—from early concept, modeling, and prototyping to validation, manufacturing, and sustaining engineering.

What You’ll Own

• Lead electrical design of SMPS‑based power supplies from concept through production release
• Design for challenging environments, ensuring high reliability and robustness
• Perform electrical, thermal, and DVT measurements throughout all stages of development
• Model, breadboard, and build prototypes for rapid iteration and validation
• Design and specify custom magnetic components for advanced SMPS designs
• Develop and optimize digital and analog control interfaces
• Mitigate input/output noise and improve power quality and efficiency
• Provide sustaining engineering support for existing power supply platforms
• Partner with manufacturing and supply chain teams to qualify alternate components and improve production efficiency

Required Qualifications:

• 7+ years of hands‑on SMPS design experience, including topologies such as Forward, Flyback, Buck, Boost, etc.
• Deep experience designing and specifying magnetics for power conversion
• Strong background in analog and digital power control circuits
• Solid understanding of noise mitigation, EMI/EMC considerations, and power integrity
• Strong knowledge of discrete semiconductors and passive components
• Proficiency with electrical modeling and simulation tools (e.g., SPICE‑based tools, simulation suites)

• Re-location assistance will be provided for candidates within U.S.

.Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver

value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and

veterans.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.