Engineering Journal Jobs in Streetsboro
21 positions found
Avantor, a Global Fortune 500 company is looking for a dedicated Quality Assurance Engineer/ Food Safety to optimize our BPS manufacturing/ QARA organization. This Aurora, OH role is full-time, on-site.
Minimum Education Requirement:
- Bachelor's degree
Required Experience (4+ yrs):
- Leading, coordinating and maintaining a site food safety program FSSC Certification
- Applying quality engineering principles, tools and techniques to develop and optimize systems and processes so that they are aligned with company strategy and regulatory requirements.
- Using root cause analysis and risk assessment tools and techniques to perform investigations and determine appropriate corrective action.
- FSSC (Food Safety System Certifications) certification or comparable
- Reviewing and approving quality assurance procedures and reports.
- Leading, conducting and managing internal audits.
- Maintaining SOP's and Quality Management Systems
- Monitoring compliance with ISO and FDA Quality System Regulation standards.
Preferred Experience:
- Providing support for customer and regulatory audits.
- Updating approved supplier index.
- Maintaining supplier qualification documents and qualifications of service providers that assure compliance with procedures and programs.
- Deviation and complaint investigations, including root cause analysis tools and technical writing.
- Collecting, reviewing, and interpreting data for trend reports, metrics, quality system reviews and complaints.
- Participating in, coordinating and maintaining validations
- CQE/CQA certification.
- Leading, coordinating and maintaining environmental monitoring programs.
How you will thrive and create an impact:
Avantor is a leading life sciences company and global provider of mission-critical products and services to the life sciences and advanced technology industries. A GMP manufacturing facility, the Aurora, OH location specializes in manufacturing biochemicals.
Collaborating/ interfacing effectively with team members the Quality Assurance Engineer is responsible for quality assurance activities with oversight of the food safety program. While performing other duties as assigned, this role will be accountable for:
- Leading the food safety committee
- Investigations
- Quality Management System SOP's
- Validations
- Performing Incoming Audits
- Maintaining Halal, Kosher, and FSSC 22000 certifications and all associated documentation.
- Quality continuous improvements.
Disclaimer:
The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.
Why Avantor?
Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.
The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.
We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!
EEO Statement:
We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.
If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.
For more information about equal employment opportunity protections, please view the Know Your Rights poster.
3rd Party Non-Solicitation Policy:
By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.
Essential Job Functions:
Develops, evaluates, and improves manufacturing processes while maintaining compliance to design specifications.
Programming of equipment, creation of CNC code, and tool path simulation.
Primary contact for design engineering or program management on manufacturing processes.
Creates and maintains manufacturing methods, Bill of Materials, and labor standards in ERP system.
Participates in activities related to C.I. and cost reductions/process improvements.
Design, construction, and validation of tooling, fixtures, gages, and equipment.
Workflow / cell design with a focus on waste reduction and process improvement.
Analysis of manufacturing variances to help identify key areas in need of improvement.
Troubleshoot and solve manufacturing problems in a machining environment.
Support Supply Chain and Quality with supplier development activities as needed.
Mentor/guide lower level manufacturing engineers.
Support customer complaints and concerns.
Provide support for Lean manufacturing and continuous improvement initiatives, companywide.
Other duties, reporting, special assignments, or projects as needed and assigned.
Must remain current with, and complete all required training as assigned.
Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements.
Qualifications:
5-10 years manufacturing engineering experience.
Minimum 5 years CAD and CAM software experience required. Mastercam preferred.
AutoCAD Inventor 3D modelling or similar software required.
Vericut experience preferred.
Ability to read and interpret complex 2D blueprints and 3D models required.
Working knowledge of GD&T required.
Experience with tooling selection and fixture design required.
Knowledge of both manual and CNC machining equipment, specifically multi-axis (5+) programming experience.
Hands on troubleshooting & problem solving including statistical analysis.
Ability to implement change and train employees in a production floor environment.
Excellent technical, written, and oral communication skills.
Working knowledge of Microsoft products.
Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company.
Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results.
Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies.
May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual.
Education:
Four-year degree in engineering preferred, but not required (mechanical, aerospace, or manufacturing preferred)
Job Title: Process Engineer, with 5axis CNC experience - Advanced Manufacturing
Location: Stow, OH
Salary: $80,000-$120,000
About the Role:
Join our dynamic team as a Process Engineer, where you'll be at the forefront of developing and optimizing manufacturing processes for complex product lines. This isn't just an engineering role - it's an opportunity to shape production systems, mentor team members, and drive real innovation on the shop floor. If you're passionate about turning designs into reality and thrive in a hands-on manufacturing environment, we want to hear from you.
What You'll Do:
- Lead process development and optimization for new product launches and existing manufacturing lines
- Create and optimize CNC programs using advanced CAM software (Mastercam preferred)
- Design and validate custom tooling, fixtures, and equipment using 3D modeling (AutoCAD Inventor or similar)
- Drive continuous improvement initiatives using Lean manufacturing principles
- Serve as the manufacturing expert for cross-functional teams, providing technical guidance
- Troubleshoot complex manufacturing challenges in a machining environment
- Develop and implement process improvements that reduce waste and enhance quality
What You Bring:
- 5-10 years of hands-on manufacturing engineering experience
- Expertise in CAD/CAM software and CNC programming (5-axis experience required)
- Proficiency in 3D modeling and blueprint reading with strong GD&T knowledge
- Demonstrated experience in tooling selection and fixture design
- Proven ability to solve complex manufacturing problems using data-driven approaches
- Strong leadership skills with experience mentoring junior engineers
- Excellent communication skills and ability to thrive in a collaborative environment
Why Join Us?
- Competitive compensation and comprehensive benefits package
- Opportunity to work with state-of-the-art manufacturing technology
- Strong focus on professional development and continuous learning
- Collaborative team environment that values innovation
- Clear career growth path with opportunities for advancement
Ready to Make an Impact?
If you're ready to take your manufacturing engineering career to the next level, apply now! We're excited to meet passionate engineers who are ready to drive manufacturing excellence.
[Apply Now Button/Link]
#Hiring #ProcessEngineer #ManufacturingEngineer #CNCProgramming #EngineeringJobs #LeanManufacturing #CADCAM #NowHiring #ManufacturingCareers
We are an industry leader in aerospace manufacturing; supporting our clients aircraft applications.
Why join us?
Competitive Compensation
401K Match
Medical Insurance
Dental Insurance
Vision Insurance
Short-Term Disability Insurance
Long-Term Disability Insurance
Accidental Death and Dismemberment Insurance
Life Insurance
Flexible Spending Accounts (Medical and Dependent Care)
Job Details
Job Details:
Are you a skilled CNC Machinist looking for an exciting opportunity to showcase your skills and grow your career? We are a leading engineering company seeking a dedicated and experienced CNC Machinist to join our dynamic team. This is a permanent, full-time position where you will play a crucial role in our production process. You will be working with state-of-the-art machinery and will have the opportunity to work on a variety of challenging and rewarding projects.
Responsibilities:
As a CNC Machinist, your day-to-day duties will include:
1. Setting up and operating CNC machines, including lathes and mills, to produce precision parts to exact specifications.
2. Reading and interpreting technical drawings and specifications to ensure accurate production.
3. Selecting and installing appropriate tools and attachments for the machine operation.
4. Performing routine machine maintenance and troubleshooting any issues that may arise during the production process.
5. Ensuring adherence to all safety protocols and maintaining a clean and organized workspace.
6. Participating in continuous improvement initiatives and suggesting ways to improve efficiency and reduce waste.
7. Collaborating with team members and other departments to ensure smooth workflow and meet production deadlines.
Qualifications:
To be considered for this role, you must have:
1. A minimum of three years of experience as a CNC Machinist.
2. Proficiency in operating CNC lathes and mills.
3. Demonstrated experience in CNC setup.
4. Strong understanding of technical drawings and specifications.
5. Excellent problem-solving skills and a keen eye for detail.
6. Strong communication and teamwork skills.
7. The ability to multitask and work under pressure to meet production deadlines.
8. A commitment to maintaining a safe and clean working environment.
9. A diploma or certificate in machining or a related field is preferred.
This is a fantastic opportunity for a CNC Machinist who is looking to take their career to the next level. If you have the skills and experience we're looking for, we would love to hear from you. Apply today and join our team of engineering professionals!
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry.
You will help our customers keep their vehicles in shape and on the road.
Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you.
Why is this job awesome? For starters, no day is the same.
You’ll get to work on lots of different types of equipment—not just one manufacturer.
We work hard to get the job done, but we also make sure you have the time you need to do the job right.
Safety and reliability are our top priorities.
Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use.
And we will make sure you are getting the industry certified training you need to succeed and grow your career.
You’ll learn from the best in the industry.
We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.
If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team.
Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver’s license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.
• Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role.
The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years.
Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.
• Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required.
Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.
Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.
• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.
• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.
• The associate must be able to safely work in all weather conditions.
• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.
• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds.
Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 8493 N Boyle Pkwy Primary Location: US-OH-Twinsburg Employer: Penske Truck Leasing Co., L.P.
Req ID: 2602979
Macedonia, OH
$100,000–$115,000 per year | Full‑Time | Direct Hire | Monday–Friday (Days)
Benefits: 401(k), Medical, Dental, Vision, Life Insurance + more
About the Role
A growing metals manufacturer in Macedonia, OH is hiring a Quality Manager to lead all quality functions and drive continuous improvement. This is a high‑impact role reporting directly to the CEO.
Must‑Haves
- Strong Quality experience in manufacturing
- Leadership experience
- Authorized to work in the USA
What You’ll Do
- Lead and maintain QMS (ISO, IATF 16949)
- Drive zero‑defect and continuous improvement initiatives
- Lead root cause analysis and corrective actions
- Oversee audits (internal & external)
- Manage and develop the Quality team
- Support PPAP, customer reports, and quality documentation
- Resolve customer and production quality issues
- Track and report key quality metrics
What You Bring
- Bachelor’s in Engineering (Master’s preferred)
- 10+ years in Quality Management
- Strong knowledge of IATF 16949 (preferred)
- Solid understanding of manufacturing processes and quality tools
- Strong leadership, communication, and problem‑solving skills
Benefits:
- 401(k)
- Dental insurance
- Health insurance
- Vision insurance
We are currently assisting our client, an industrial manufacturer, with a Machine Design Engineering search in the Stow, OH area.
Responsibilities:
- Will be responsible for the design and development of comprehensive machinery and automated systems.
- Engage in collaboration with Project Managers and Engineers to ensure all functional requirements are fulfilled.
- Oversee projects from the initial concept stage through to successful manufacturing.
Key Requirements:
- Proven experience in machine and equipment design.
- Proficiency in 3D CAD software.
- Ability to develop a concept into manufacturing
Additional Information:
- All information will be kept strictly confidential
- Applications will not be considered without a Resume/Curriculum Vitae which includes contact information
Who we are:
• JMI Recruiting Services is a third party search firm that strategically partners with our clients to recruit exceptional talent nationwide. Our customers include Fortune 500, private equity firms, and privately held companies. With our proven process, excellent track record, and willingness to outwork the competition, we consistently deliver quantifiable results.
Job Purpose
The Sales Account Executive is responsible for supporting sales growth and customer satisfaction within an assigned territory through office-based operations. Working in close collaboration with the Territory Sales Manager, this role serves as the primary point of contact for internal sales operations, managing customer accounts, processing orders, generating quotes, and providing support to both channel partners and direct customers. This position bridges the gap between inside operations and sales teams, ensuring a seamless customer experience and driving efficiency in sales execution.
Key Responsibilities
Sales Activities
- Serve as the internal point of contact for all customer inquiries, quotations, and order-related communication within the territory
- Collaborate with the Territory Sales Manager to align on strategy, opportunity tracking, and customer engagement plans
- Prepare, track, and follow up on sales quotes and proposals in a timely manner
- Maintain current CRM records for accounts, opportunities, and sales activities
- Follow up with existing customers to promote reorders, new products, and value-added services
- Coordinate with operations, engineering, and logistics teams to ensure delivery and order fulfillment
- Assist with lead qualification and nurturing efforts to support the pipeline
- Monitor territory sales performance against targets, identifying trends or risks and proposing corrective actions
- Support price negotiations and contract renewals in alignment with sales policies and margin goals
- Conduct regular account reviews and support the development of territory growth plans
- Carry out technical and contract reviews for MTO, CTO, and ETO Jobs
- Support other Territory Internal Account Executives when needed
Company Description
Geis Companies is a Design/Build firm in Ohio, established in 1967, and recognized as one of the largest industrial Design/Build companies in the state. Known for its proven track record of delivering on-time and on-budget projects, Geis has served over 1000's of clients, catering to both renovation and new construction needs across various states. With projects completed or underway in more than 43 states, Geis Companies has evolved into a leading national design-build team.
Role Description
This is a full-time, on-site role located in Streetsboro, OH, for a Construction Estimator. The Construction Estimator will be responsible for preparing detailed cost estimates, performing quantity take-offs, and working closely with project managers and clients to ensure accurate budgeting and cost management. The role also involves collaborating across teams, analyzing project requirements, and ensuring a high level of communication with all stakeholders to deliver successful outcomes.
Qualifications
- Proficiency in Construction Estimating and performing Quantity Take-offs
- Strong skills in Cost Management and Budgeting
- Excellent Communication skills for effective collaboration with teams and clients
- Familiarity with construction software and tools preferred
- Bachelor’s degree in Construction Management, Engineering, or a related field
- Ability to work efficiently in a fast-paced, on-site environment
- Experience with industrial or commercial construction projects is a plus
Look no further!
The Borgen Project is an international organization that works at the political level to improve living conditions for people impacted by war, famine and poverty.
With 20 years of experience in the advocacy space, The Borgen Project has worked to support the passage of numerous bills that have benefitted close to 500 million people in developing countries.
Writer/Journalist Internship: The role is focused on content creation for BORGEN Magazine or The Borgen Project Blog . This is a part-time 12-hours per week, 12 week, unpaid remote internship. If your availability is limited, you can work ahead and complete the program in fewer weeks.
.
Responsibilities will include:
Article writing.
Researching topics.
Assisting with The Borgen Project's advocacy efforts.
Assisting with fundraising. Create a personal fundraising campaign and meet targets.
Experience:
No prior experience is necessary, we're looking for people who are passionate about fighting poverty and righting wrongs, regardless of your GPAs/background.
Details:
This is an unpaid internship, although college credit is available.
Start Date:
New programs begin every month, you choose the month you wish to start.
