Engineering Journal Jobs in Odenton
45 positions found — Page 4
D
Diesel Technician
Salary not disclosed
DIESEL TECHNICIAN HUGE EARNING POTENTIAL Tate Dodge Chrysler Jeep, Inc.
in Glen Burnie, MD is looking for an experienced Diesel Technician.
If you are looking to further your career and earn a great income, apply now! Job Responsibilities: Confer with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements.
Examine vehicles to determine wear and extent of damage or malfunctions.
Assist the shop foreman/lead technician in recruiting and hiring qualified service technicians as well as assisting technicians with their skills, providing technical support when needed and monitoring performance and productivity.
Test and adjust repaired systems to meet manufacturers' performance specifications.
Ensure that the shop is in excellent condition in regard to cleanliness, safety, and equipment condition, and conducting periodic spot checks to maintain high-quality service.
Test-driving vehicles, and testing components and systems, using equipment such as infrared engine analyzers, compression gauges and computerized diagnostic devices.
Master technicians should: Have 5+ (preferably all 8) The National Institute of Automotive Service Excellence (ASE) certifications which include: (engine repair, engine performance, heating and air conditioning, electrical systems, automatic transmissions, manual transmission and axle, brakes and front end) should have at least five plus years of experience as an automotive technician.
MUST have state inspection license Dealership Offers: Pay up to $30/hour Great Working Environment Benefits Available
in Glen Burnie, MD is looking for an experienced Diesel Technician.
If you are looking to further your career and earn a great income, apply now! Job Responsibilities: Confer with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements.
Examine vehicles to determine wear and extent of damage or malfunctions.
Assist the shop foreman/lead technician in recruiting and hiring qualified service technicians as well as assisting technicians with their skills, providing technical support when needed and monitoring performance and productivity.
Test and adjust repaired systems to meet manufacturers' performance specifications.
Ensure that the shop is in excellent condition in regard to cleanliness, safety, and equipment condition, and conducting periodic spot checks to maintain high-quality service.
Test-driving vehicles, and testing components and systems, using equipment such as infrared engine analyzers, compression gauges and computerized diagnostic devices.
Master technicians should: Have 5+ (preferably all 8) The National Institute of Automotive Service Excellence (ASE) certifications which include: (engine repair, engine performance, heating and air conditioning, electrical systems, automatic transmissions, manual transmission and axle, brakes and front end) should have at least five plus years of experience as an automotive technician.
MUST have state inspection license Dealership Offers: Pay up to $30/hour Great Working Environment Benefits Available
Not Specified
R
Automotive Mechanic Mobile
$42 per hour
Position Description
Torque by Ryder is Immediately hiring a Permanent Full Time Automotive Technician to support our Truck Fleet in Annapolis Junction, MD
Hear it from a Torque Mobile Mechanic Technician Here:
- Technician Positions Pay Each Week
- Hourly Pay: $42.00 per hour
- Retention Bonus: $2000 paid every quarter within the first year.
- Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday 2:00 PM Start time
- Fuel Card and Company Cell Phone provided
- For mobile technicians, work site service vehicle will be provided
- Grow with Ryder: This position provides additional training to level up.
We want the right Automotive Maintenance Repair Technician to join us at Ryder manage our fleet of Light and Medium Duty Trucks.
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions? Call Jason or text “Annapolis Junction” to 9 to speak with your recruiter today.
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities
Click Here to See All Ryder Careers:
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Professional diploma preferred
- Three (3) years ormore in combination of classroom training and work experience
- NonCommercial Driver License CLASS E
- Valid Commercial Driver License (CDL) CLASS A preferred
- State driver's license as required
- Ability to:
- Understand and adhere to Company policies in all areas
- Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
- Work independently and as a member of a team
- Demonstrates customer service skills
- Strong verbal and written communication skills
- Capable of multi-tasking, highly organized, with excellent time management skills
- Preventive Maintenance (PM230&PM298) within 90 Days
- Brakes-Air (BA220&BA298) within 90 Days
- Brake mechanics/inspectors FMCS 396.25
- Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
- Tire & Wheel TW220 within 90 Days
- CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
- Battery Charge and Check, Warranty
- HD electrical - DR208 within 90 Days
- Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
- OEM on-line engine courses (minimum 2)
- Possesses flexibility to work in a fast paced, dynamic environment
- Excellent organizational skills
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Perform diagnosis, repairs, inspections and preventative maintenance for non-contractual customers. May assist higher-grade Automotive Maintenance Specialists and assist them in completing complex diagnostic repairs.
- Perform routine vehicle maintenance including, but not limited to, tune-ups, oil changes, tire changes, fuel filter changes, fluid checks, alignments, basic suspension replacement and light and mirror replacements.
- Ability to diagnose, repair or replace engines parts including but not limited to alternators, starts, radiators, and injectors, transmissions and other fuel components.
- Perform basic diagnostics.
- Hydraulic brake inspections, repairs, and replacements.
- May operate out of mobile maintenance vehicle and travel to customer yards within assigned region.
- Possess general knowledge and understanding of the Torque products and services.
- Represent Torque/Ryder to establish a relationship with the customer.
- Utilize key functions of Salesforce and electronic documentation available. Ensure proper documentation of work orders, customer repair authorizations, and repair notes are within Salesforce.
- Perform environmental duties such as site inspections, site clean-ups/disposals, vehicle chemicals with some guidance and direction.
- Work in accordance with all federal/regional and corporate compliance guidelines.
- Perform other duties as assigned.
Posted Date 3 weeks ago (2/26/2026 4:45 PM)
Requisition ID 2
Location (Posting Location) : State/Province MD
Location (Posting Location) : City ANNAPOLIS JUNCTION
Location (Posting Location) : Postal Code 20701
Category Technicians/Service Employees3
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1001719
Min Pay USD $42.00/Hr.
Max Pay USD $42.00/Hr.
permanent
J
Quality Supervisor
🏢 Jobot
Salary not disclosed
Food Manufacturing Plant in need of experienced Quality Supervisor / DC metro area This Jobot Job is hosted by: Matt Swaneveld Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $80,000 per year A bit about us: The Quality Supervisor leads day‑to‑day quality operations on the production floor to ensure products meet all food safety, regulatory, and customer requirements.
This role oversees QA/ QC technicians, manages Critical Control Points (CCPs), verifies sanitation and allergen controls, coordinates in‑process and finished‑product testing, and drives corrective and preventive actions (CAPA).
The ideal leader combines deep knowledge of food manufacturing with hands‑on coaching, clear communication, and disciplined execution.
Why join us? Medical, Dental, and Vision PTO and sick leave 401k with company match Relocation assistance Job Details Qualifications Bachelor’s degree in Food Science, Microbiology, Chemistry, Engineering, or related field; or equivalent experience in food & beverage manufacturing.
3+ years in QA/ QC within food/beverage and/or pharma plants Prior leadership of hourly/ technician teams required.
Certifications: HACCP (required); PCQI (preferred); SQF Practitioner or BRCGS Internal Auditor (preferred).
Proficiency with SPC, problem‑solving/ root cause, and quality systems (LIMS/ MES/ ERP); strong Excel and documentation skills.
Knowledge of FSMA, GMPs, allergen management, sanitation, environmental monitoring, and thermal/ pasteurization controls (as applicable to products).
Excellent communication, situational leadership, and collaboration skills; able to influence across Operations, Sanitation, Engineering, and Supply Chain.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $80,000 per year A bit about us: The Quality Supervisor leads day‑to‑day quality operations on the production floor to ensure products meet all food safety, regulatory, and customer requirements.
This role oversees QA/ QC technicians, manages Critical Control Points (CCPs), verifies sanitation and allergen controls, coordinates in‑process and finished‑product testing, and drives corrective and preventive actions (CAPA).
The ideal leader combines deep knowledge of food manufacturing with hands‑on coaching, clear communication, and disciplined execution.
Why join us? Medical, Dental, and Vision PTO and sick leave 401k with company match Relocation assistance Job Details Qualifications Bachelor’s degree in Food Science, Microbiology, Chemistry, Engineering, or related field; or equivalent experience in food & beverage manufacturing.
3+ years in QA/ QC within food/beverage and/or pharma plants Prior leadership of hourly/ technician teams required.
Certifications: HACCP (required); PCQI (preferred); SQF Practitioner or BRCGS Internal Auditor (preferred).
Proficiency with SPC, problem‑solving/ root cause, and quality systems (LIMS/ MES/ ERP); strong Excel and documentation skills.
Knowledge of FSMA, GMPs, allergen management, sanitation, environmental monitoring, and thermal/ pasteurization controls (as applicable to products).
Excellent communication, situational leadership, and collaboration skills; able to influence across Operations, Sanitation, Engineering, and Supply Chain.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
D
Cloud Customer Support Engineer
Salary not disclosed
Attention cleared cloud professionals! We are seeking an experienced Customer Support Engineer to join our Microsoft operations team supporting critical government cloud environments.
This role combines advanced technical troubleshooting with deployment capability, serving as a key technical resource for both customer-facing support and platform operations.
The ideal candidate will bring expertise in Microsoft 365 environments, incident resolution coordination, and the ability to drive continuous improvement across support and deployment operations.
These roles require a Top Secret SCI with Full Scope Poly clearance and are onsite in Fort Meade, MD.
Key Responsibilities Customer Support & Incident Management Diagnose and resolve technical issues across the Microsoft 365 platform Drive root-cause analysis for customer-reported incidents Deployment & Platform Operations Execute and oversee platform component deployments, including software upgrades and configuration changes Deploy and validate services for multiple engineering teams Follow established procedures including Technical Service Guides and Knowledgebase articles while identifying opportunities for process improvement Conduct validation testing according to Troubleshooting Guides Manage and maintain workstation systems used for daily operations Process Improvement & Knowledge Management Identify opportunities for optimization and automation Maintain technical documentation and troubleshooting procedures in team knowledge base Provide detailed status updates via email and ticketing systems Contribute to continuous improvement initiatives Support root-cause analyses, ad-hoc metrics, and data discovery requests Minimum Qualifications BS in Computer Science or other technical discipline is preferred.
4+ years of experience in technical support or engineering roles supporting enterprise environments 3+ years of hands-on experience with Microsoft 365/Office 365 platform and services Clearance Requirement Must maintain active TS/SCI w/FSP clearance throughout employment Preferred Qualifications Microsoft certifications (AZ-900, MS-900, or equivalent) – required to obtain one within 6 months of start Security certifications (CompTIA Security+ or equivalent) – required to obtain one within 6 months of start Experience with automation tools and scripting (PowerShell, Python, or similar) Experience with monitoring tools Able to quickly learn customer scenarios or new service scenarios Strong documentation skills and commitment to knowledge sharing Job Specific Skills Outstanding customer service skills with experience resolving issues in a high-pressure situation Demonstrated experience with Azure cloud services and government cloud environments Experience with deployment processes, change management, and configuration management Experience conducting validation testing to ensure system integrity and performance Excellent analytical and troubleshooting skills Strong written and verbal communication skills Ability to take ownership of customer concerns, proactively coordinating with appropriate teams to drive resolution and maintain clear communication throughout Proven ability to monitor multiple communication channels (e.g.
phone, email, Teams) and respond to meet SLA/KPI requirements Other Job Specific Skills Experience with system administration support tools such as Windows/Linux Experience supporting a cloud-based environment Strong interpersonal skills Strong oral and written communication skills Experience in supporting Cloud based environment and tools such as Azure/AWS Experience analyzing, troubleshooting, and providing solutions for technical issues Ability to problem solve and collaborate with team members Strong organizational and multi-tasking skills Strong in technical communications with both technical and non-technical peers Able to maintain professionalism under pressure Strong customer focus #cjpost
This role combines advanced technical troubleshooting with deployment capability, serving as a key technical resource for both customer-facing support and platform operations.
The ideal candidate will bring expertise in Microsoft 365 environments, incident resolution coordination, and the ability to drive continuous improvement across support and deployment operations.
These roles require a Top Secret SCI with Full Scope Poly clearance and are onsite in Fort Meade, MD.
Key Responsibilities Customer Support & Incident Management Diagnose and resolve technical issues across the Microsoft 365 platform Drive root-cause analysis for customer-reported incidents Deployment & Platform Operations Execute and oversee platform component deployments, including software upgrades and configuration changes Deploy and validate services for multiple engineering teams Follow established procedures including Technical Service Guides and Knowledgebase articles while identifying opportunities for process improvement Conduct validation testing according to Troubleshooting Guides Manage and maintain workstation systems used for daily operations Process Improvement & Knowledge Management Identify opportunities for optimization and automation Maintain technical documentation and troubleshooting procedures in team knowledge base Provide detailed status updates via email and ticketing systems Contribute to continuous improvement initiatives Support root-cause analyses, ad-hoc metrics, and data discovery requests Minimum Qualifications BS in Computer Science or other technical discipline is preferred.
4+ years of experience in technical support or engineering roles supporting enterprise environments 3+ years of hands-on experience with Microsoft 365/Office 365 platform and services Clearance Requirement Must maintain active TS/SCI w/FSP clearance throughout employment Preferred Qualifications Microsoft certifications (AZ-900, MS-900, or equivalent) – required to obtain one within 6 months of start Security certifications (CompTIA Security+ or equivalent) – required to obtain one within 6 months of start Experience with automation tools and scripting (PowerShell, Python, or similar) Experience with monitoring tools Able to quickly learn customer scenarios or new service scenarios Strong documentation skills and commitment to knowledge sharing Job Specific Skills Outstanding customer service skills with experience resolving issues in a high-pressure situation Demonstrated experience with Azure cloud services and government cloud environments Experience with deployment processes, change management, and configuration management Experience conducting validation testing to ensure system integrity and performance Excellent analytical and troubleshooting skills Strong written and verbal communication skills Ability to take ownership of customer concerns, proactively coordinating with appropriate teams to drive resolution and maintain clear communication throughout Proven ability to monitor multiple communication channels (e.g.
phone, email, Teams) and respond to meet SLA/KPI requirements Other Job Specific Skills Experience with system administration support tools such as Windows/Linux Experience supporting a cloud-based environment Strong interpersonal skills Strong oral and written communication skills Experience in supporting Cloud based environment and tools such as Azure/AWS Experience analyzing, troubleshooting, and providing solutions for technical issues Ability to problem solve and collaborate with team members Strong organizational and multi-tasking skills Strong in technical communications with both technical and non-technical peers Able to maintain professionalism under pressure Strong customer focus #cjpost
Not Specified
K
Intern
Salary not disclosed
Overview Keller is the world leader in geotechnical construction and deep foundations.
With a North American presence of over 100 years, we operate as the market leader with over 50 offices throughout the US and Canada.
By connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges.
Our values of integrity, collaboration, and excellence enable us to lead the industry in providing the optimal solution for our clients.
Keller is looking for an Intern based out of our Odenton, MD location.
Responsibilities Responsibilities will include the following: This internship will allow the candidate to gain real world construction engineering and management experience.
This experience will provide an opportunity to learn first-hand the world of Deep Foundation Construction.
Keller is an excellent fit for any candidate who is looking to become a civil engineer and work within the Construction industry.
Your duties will vary between the office and field atmosphere: Assist the Superintendent with physical and electronic paperwork/forms (daily reports, safety forms, toolbox talks, DTAs) Support the Superintendent by picking up supplies, delivering paperwork to the GC or office, and various other errands Attend meetings and document proceedings Assist Project Managers with researching opportunities, downloading plans, specs, Geotechnical reports, etc.
Generate take-offs and estimates Visit project sites to deliver or pickup paperwork Qualifications Qualified candidates will have: Pursuing a B.S.
in Civil Engineering or Construction Management Communication and Teamwork Skills are a must Commercial instincts Get-it-done attitude Sound technical knowledge Problem solving skills Ability to meet fast paced and changing schedules and deadlines
With a North American presence of over 100 years, we operate as the market leader with over 50 offices throughout the US and Canada.
By connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges.
Our values of integrity, collaboration, and excellence enable us to lead the industry in providing the optimal solution for our clients.
Keller is looking for an Intern based out of our Odenton, MD location.
Responsibilities Responsibilities will include the following: This internship will allow the candidate to gain real world construction engineering and management experience.
This experience will provide an opportunity to learn first-hand the world of Deep Foundation Construction.
Keller is an excellent fit for any candidate who is looking to become a civil engineer and work within the Construction industry.
Your duties will vary between the office and field atmosphere: Assist the Superintendent with physical and electronic paperwork/forms (daily reports, safety forms, toolbox talks, DTAs) Support the Superintendent by picking up supplies, delivering paperwork to the GC or office, and various other errands Attend meetings and document proceedings Assist Project Managers with researching opportunities, downloading plans, specs, Geotechnical reports, etc.
Generate take-offs and estimates Visit project sites to deliver or pickup paperwork Qualifications Qualified candidates will have: Pursuing a B.S.
in Civil Engineering or Construction Management Communication and Teamwork Skills are a must Commercial instincts Get-it-done attitude Sound technical knowledge Problem solving skills Ability to meet fast paced and changing schedules and deadlines
internship
B
Construction Senior Project Manager
Salary not disclosed
About Bering Straits Professional Services, LLC Bering Straits Professional Services (BSPS) is committed to world-class management of global logistics, training and procurement services for U.S.
Government agencies.
BSPS is certified by the .
In February 2022, BSPS became an International Organization for Standardization (ISO) 9001 certified company.
BSPS received the ISO 9001 quality standard certification through the Performance Review Institute (PRI).
PRI recognized BSPS for having met the stringent requirements of international standards, ongoing commitment to satisfying stakeholders and a dedication to continual improvement of their management systems.
Through this certification, BSPS has joined an elite number of organizations worldwide who have achieved certification to this globally recognized ISO 9001 quality standard.
About this position: Construction Senior Project Manager Location – Hanover, MD The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Wage/Salary Range: $175,000 – 225,000 Applicants will be notified via phone or email within ten (10) business days of submittal.
Essential Duties & Responsibilities • Previous Federal contract experience (DOD and Civilian agencies) • Management of task order contracts • Estimating experience • Experience with project buyout • Ability to read prints (civil, structural, electrical, HVAC, plumbing, etc.) • Experience writing sources sought, requests for information, proposals • Business development background to include proposal development • Ability to suggested value engineered options to customers with restrictive budgets • RSMeans experience • Microsoft Project/P6 experience Required (Minimum Necessary) Qualifications • Education Requirements: Engineering Degree with Masters in related customer field • Level of Experience Requirements: 10 years relevant experience; Civil Engineer, P.E.
• Large design-build project experience • Substantial Electrical HV and MV infrastructure experience • Experience with Prime Contractors Knowledge, Skills, Abilities, and Other Characteristics • Familiarity with the Microsoft Suite • Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 • Valid Driver’s License Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce.
• Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.
Preferred • N/A Supervisory Responsibilities • This position will have supervisory responsibilities.
DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
You may delete this line if it does not apply to the job.
Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit and talk or hear.
The employee is frequently required to walk; use hands to finger or feel and reach with hands and arms.
The employee is occasionally required to stand, climb or balance and stoop, kneel, crouch or crawl.
The employee must occasionally lift and/or move up to 25 pounds.
Specific vision abilities required by this job include close vision.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
The employee will normally work in a temperature-controlled office environment, with frequent exposure o electronic office equipment.
During visits to areas of operations, may be exposed to extreme cold or hot weather conditions.
The applicant may occasionally be exposed to fumes or airborne particles, toxic or caustic chemicals and loud noise.
Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
Government agencies.
BSPS is certified by the .
In February 2022, BSPS became an International Organization for Standardization (ISO) 9001 certified company.
BSPS received the ISO 9001 quality standard certification through the Performance Review Institute (PRI).
PRI recognized BSPS for having met the stringent requirements of international standards, ongoing commitment to satisfying stakeholders and a dedication to continual improvement of their management systems.
Through this certification, BSPS has joined an elite number of organizations worldwide who have achieved certification to this globally recognized ISO 9001 quality standard.
About this position: Construction Senior Project Manager Location – Hanover, MD The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Wage/Salary Range: $175,000 – 225,000 Applicants will be notified via phone or email within ten (10) business days of submittal.
Essential Duties & Responsibilities • Previous Federal contract experience (DOD and Civilian agencies) • Management of task order contracts • Estimating experience • Experience with project buyout • Ability to read prints (civil, structural, electrical, HVAC, plumbing, etc.) • Experience writing sources sought, requests for information, proposals • Business development background to include proposal development • Ability to suggested value engineered options to customers with restrictive budgets • RSMeans experience • Microsoft Project/P6 experience Required (Minimum Necessary) Qualifications • Education Requirements: Engineering Degree with Masters in related customer field • Level of Experience Requirements: 10 years relevant experience; Civil Engineer, P.E.
• Large design-build project experience • Substantial Electrical HV and MV infrastructure experience • Experience with Prime Contractors Knowledge, Skills, Abilities, and Other Characteristics • Familiarity with the Microsoft Suite • Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 • Valid Driver’s License Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce.
• Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.
Preferred • N/A Supervisory Responsibilities • This position will have supervisory responsibilities.
DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
You may delete this line if it does not apply to the job.
Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit and talk or hear.
The employee is frequently required to walk; use hands to finger or feel and reach with hands and arms.
The employee is occasionally required to stand, climb or balance and stoop, kneel, crouch or crawl.
The employee must occasionally lift and/or move up to 25 pounds.
Specific vision abilities required by this job include close vision.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
The employee will normally work in a temperature-controlled office environment, with frequent exposure o electronic office equipment.
During visits to areas of operations, may be exposed to extreme cold or hot weather conditions.
The applicant may occasionally be exposed to fumes or airborne particles, toxic or caustic chemicals and loud noise.
Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
Not Specified
R
Diesel Mechanic
🏢 Ryder System
$30 per hour
Position Description
Ryder is hiring a Senior Level Diesel Technician in Glen Burnie, Maryland — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Hear it from a Ryder Technician Employee Here:
- Hourly Pay: $30.00 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Schedule: Monday - Friday
- Hours: First Shift 6:00 am – 2:30 pm
We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.
Apply Here with Ryder Today
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High school diploma or equivalent preferred
- Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
- Basic tools, required
- Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
- Routine preventative maintenance, which should include oil changes, brake and tire work
- Basic diagnostics and repairs, including AC and electrical systems, required
- Three (3) years or more relevant work experience, preferred
- All other certification as required by location, required
- Valid Commercial Driver License (CDL) CLASS A,preferred
- All other certification as required by location, required
- ADDITIONAL REQUIREMENTS:
- Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
- Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
- This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Performs vehicle maintenance and repair duties including:
- Performs standard vehicle maintenance
- Performs preventive maintenance
- Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
- Completes complex and detailed mechanical inspections & repairs with minimal supervision
- Replaces defective components as instructed
- Works unsupervised on most tasks
- Performs facility maintenance duties
- Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
- Utilizes key functions of Shop Management System and electronic documentation available.
- Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
- Acts as mentor for Tech 1 and Tech 2 levels.
- Demonstrate the ability to access and use internal and external maintenance documents.
- Other support duties as required to support operations. These could include but are not limited to Service Island support
- SBTIII trained within 180 days (SBT220)
- Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 2 weeks ago (3/2/2026 2:00 PM)
Requisition ID 2
Location (Posting Location) : State/Province MD
Location (Posting Location) : City GLEN BURNIE
Location (Posting Location) : Postal Code 21061
Category Technicians/Service Employees5
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000356
Min Pay USD $30.00/Hr.
Max Pay USD $30.00/Hr.
permanent
J
Mechanical Construction Estimator ( HVAC and Pipe Fitting)
🏢 Jobot
Salary not disclosed
Mechanical Construction Estimator / Hybrid/ 401K Match/ Bonuses / Awesome Benefits Package/ Company Vehicle This Jobot Job is hosted by: Haley Lucas Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $95,000
- $165,000 per year A bit about us: We are seeking a Permanent Mechanical Construction Estimator with a strong background in HVAC and Pipe Fitting to join our dynamic team.
This position offers an exciting opportunity to play a pivotal role in our construction projects, where you will be responsible for estimating mechanical projects up to $10 million.
This role requires a candidate with a robust understanding of the Baltimore and Washington DC area, and a proven track record in the contracting industry.
If you are a seasoned professional with a trade school education and a Journeyman License, we encourage you to apply.
Why join us? Bonuses 401(k) 401(k) matching Dental insurance Employee discount Health insurance Paid time off Job Details Responsibilities: As a Mechanical Construction Estimator, your responsibilities will include: 1.
Utilizing your knowledge and experience in HVAC and pipe fitting to develop comprehensive, detailed, and accurate estimates for our mechanical construction projects.
2.
Applying your knowledge of the Baltimore and Washington DC area to assess project feasibility and cost-effectiveness.
3.
Leveraging your conceptual estimating experience to develop innovative strategies for project execution and cost-saving.
4.
Coordinating with the project team to transition from a bid to a proposal, ensuring all project specifications, requirements, and timelines are accurately captured.
5.
Using Quote Soft estimating software to prepare cost estimates, and analyzing data to determine cost benefits and financial impact.
6.
Collaborating with project managers, engineers, and clients to understand project scope, requirements, and potential challenges.
7.
Reviewing technical drawings, blueprints, and specifications to ensure accurate cost estimation.
Qualifications: The ideal candidate for the Mechanical Construction Estimator position should have the following qualifications: 1.
A minimum of 5 years of experience in mechanical engineering office and field experience in the contracting industry.
2.
Trade school education in a relevant field.
3.
A valid Journeyman License.
4.
Extensive knowledge of the Baltimore and Washington DC area.
5.
Proven conceptual estimating experience.
6.
Experience in estimating mechanical projects up to $10 million.
7.
Proficiency in transitioning from bid to proposal.
8.
Experience with Quote Soft estimating software.
9.
Strong understanding of HVAC installation and pipe fitting.
10.
Excellent communication and negotiation skills.
11.
Strong analytical and problem-solving abilities.
12.
Ability to work under pressure and meet tight deadlines.
13.
High level of accuracy and attention to detail.
14.
Proficiency in reading and interpreting technical drawings and blueprints.
15.
Strong team player with the ability to work independently when required.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $95,000
- $165,000 per year A bit about us: We are seeking a Permanent Mechanical Construction Estimator with a strong background in HVAC and Pipe Fitting to join our dynamic team.
This position offers an exciting opportunity to play a pivotal role in our construction projects, where you will be responsible for estimating mechanical projects up to $10 million.
This role requires a candidate with a robust understanding of the Baltimore and Washington DC area, and a proven track record in the contracting industry.
If you are a seasoned professional with a trade school education and a Journeyman License, we encourage you to apply.
Why join us? Bonuses 401(k) 401(k) matching Dental insurance Employee discount Health insurance Paid time off Job Details Responsibilities: As a Mechanical Construction Estimator, your responsibilities will include: 1.
Utilizing your knowledge and experience in HVAC and pipe fitting to develop comprehensive, detailed, and accurate estimates for our mechanical construction projects.
2.
Applying your knowledge of the Baltimore and Washington DC area to assess project feasibility and cost-effectiveness.
3.
Leveraging your conceptual estimating experience to develop innovative strategies for project execution and cost-saving.
4.
Coordinating with the project team to transition from a bid to a proposal, ensuring all project specifications, requirements, and timelines are accurately captured.
5.
Using Quote Soft estimating software to prepare cost estimates, and analyzing data to determine cost benefits and financial impact.
6.
Collaborating with project managers, engineers, and clients to understand project scope, requirements, and potential challenges.
7.
Reviewing technical drawings, blueprints, and specifications to ensure accurate cost estimation.
Qualifications: The ideal candidate for the Mechanical Construction Estimator position should have the following qualifications: 1.
A minimum of 5 years of experience in mechanical engineering office and field experience in the contracting industry.
2.
Trade school education in a relevant field.
3.
A valid Journeyman License.
4.
Extensive knowledge of the Baltimore and Washington DC area.
5.
Proven conceptual estimating experience.
6.
Experience in estimating mechanical projects up to $10 million.
7.
Proficiency in transitioning from bid to proposal.
8.
Experience with Quote Soft estimating software.
9.
Strong understanding of HVAC installation and pipe fitting.
10.
Excellent communication and negotiation skills.
11.
Strong analytical and problem-solving abilities.
12.
Ability to work under pressure and meet tight deadlines.
13.
High level of accuracy and attention to detail.
14.
Proficiency in reading and interpreting technical drawings and blueprints.
15.
Strong team player with the ability to work independently when required.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
B
Estimator
🏢 Bering Straits Native Corporation
Salary not disclosed
About Bering Straits Professional Services, LLC Bering Straits Professional Services (BSPS) is committed to world-class management of global logistics, training and procurement services for U.S.
Government agencies.
BSPS is certified by the .
In February 2022, BSPS became an International Organization for Standardization (ISO) 9001 certified company.
BSPS received the ISO 9001 quality standard certification through the Performance Review Institute (PRI).
About this position: Estimator in Hanover, MD The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Applicants will be notified via email or phone within ten business days regarding application status.
Essential Duties & Responsibilities • Previous Federal DoD contract experience • Management of proposing on task order contracts • Estimating experience • Ability to build a project from a narrative and estimate without a design.
• Assemble a proposal with all required documentation • Business development background to include proposal development • RSMeans or other cost estimating software experience • Microsoft Project experience Required (Minimum Necessary) Qualifications • Education Requirements: 4 Year Engineering Degree • Level of Experience Requirements: Three plus years’ experience in estimating construction projects from site visits / off drawings • Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 • Valid Driver’s License Knowledge, Skills, Abilities, and Other Characteristics • Knowledge of organizational procedures and workflows – understanding how work moves through a company.
• Basic knowledge of relevant technologies or tools – e.g., Microsoft 365, communication platforms, or industry‑standard software.
• Knowledge of customer service practices – principles of providing quality service and managing inquiries professionally.
• Knowledge of data privacy and confidentiality principles – awareness of proper handling of sensitive information.
• Communication skills (written and verbal) – ability to convey information clearly and professionally.
• Time management and prioritization – balancing multiple tasks and meeting deadlines.
• Problem‑solving and critical thinking – analyzing issues and selecting appropriate solutions.
• Interpersonal and teamwork skills – building rapport and collaborating effectively with others.
• Attention to detail – producing accurate, error‑free work.
• Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce.
• Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.
Preferred • N/A Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system.
The work described herein is primarily a modern office setting.
Occasional travel may be required.
Also, site visits are part of the position as needed for pricing projects and observing progress.
Supervisory Responsibilities • This position will not have supervisory responsibilities.
DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
Government agencies.
BSPS is certified by the .
In February 2022, BSPS became an International Organization for Standardization (ISO) 9001 certified company.
BSPS received the ISO 9001 quality standard certification through the Performance Review Institute (PRI).
About this position: Estimator in Hanover, MD The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Applicants will be notified via email or phone within ten business days regarding application status.
Essential Duties & Responsibilities • Previous Federal DoD contract experience • Management of proposing on task order contracts • Estimating experience • Ability to build a project from a narrative and estimate without a design.
• Assemble a proposal with all required documentation • Business development background to include proposal development • RSMeans or other cost estimating software experience • Microsoft Project experience Required (Minimum Necessary) Qualifications • Education Requirements: 4 Year Engineering Degree • Level of Experience Requirements: Three plus years’ experience in estimating construction projects from site visits / off drawings • Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 • Valid Driver’s License Knowledge, Skills, Abilities, and Other Characteristics • Knowledge of organizational procedures and workflows – understanding how work moves through a company.
• Basic knowledge of relevant technologies or tools – e.g., Microsoft 365, communication platforms, or industry‑standard software.
• Knowledge of customer service practices – principles of providing quality service and managing inquiries professionally.
• Knowledge of data privacy and confidentiality principles – awareness of proper handling of sensitive information.
• Communication skills (written and verbal) – ability to convey information clearly and professionally.
• Time management and prioritization – balancing multiple tasks and meeting deadlines.
• Problem‑solving and critical thinking – analyzing issues and selecting appropriate solutions.
• Interpersonal and teamwork skills – building rapport and collaborating effectively with others.
• Attention to detail – producing accurate, error‑free work.
• Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce.
• Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.
Preferred • N/A Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system.
The work described herein is primarily a modern office setting.
Occasional travel may be required.
Also, site visits are part of the position as needed for pricing projects and observing progress.
Supervisory Responsibilities • This position will not have supervisory responsibilities.
DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
Not Specified
J
Project Manager
🏢 Jobot
Salary not disclosed
Construction Project Manager
This Jobot Job is hosted by: Scott Dennis
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $90,000 - $130,000 per year
A bit about us:
We are seeking a seasoned Project Manager to join our dynamic team in the Construction industry. This is an excellent opportunity for an experienced professional to lead, manage and deliver complex construction projects from conception to completion. The successful candidate will have a proven track record in managing construction projects, contract management, budgeting, negotiation and a deep understanding of the construction industry. This role requires a minimum of 5 years of experience in project management in the construction industry.
Why join us?
401(k) matching
Health insurance
Paid time off
Bonus opportunities
Great Culture
Work Life Balance
Job Details
Responsibilities:
1. Oversee and manage all aspects of construction projects from initiation to completion.
2. Develop and implement project strategies to ensure projects are delivered on time, within budget, and meet high quality standards.
3. Coordinate and supervise construction teams, contractors, and subcontractors to ensure tasks are carried out according to plan.
4. Manage contracts and negotiations with vendors and suppliers.
5. Develop and manage project budgets, control project costs, and ensure financial efficiency.
6. Conduct risk assessments and implement risk management strategies.
7. Facilitate effective communication and collaboration among team members and stakeholders.
8. Resolve any issues or delays that may impact project timelines or budget.
9. Ensure compliance with safety regulations and quality standards.
10. Prepare and present project reports and updates to stakeholders and senior management.
Qualifications:
1. Bachelor's degree in Construction Management, Engineering, or related field.
2. A minimum of 5 years of experience in project management in the construction industry.
3. Proven experience in construction management, contract management, budgeting, and negotiation.
4. Strong knowledge of construction processes, materials, and legal regulations.
5. Excellent leadership and team management skills.
6. Strong problem-solving abilities and ability to make decisions under pressure.
7. Excellent written and verbal communication skills.
8. Strong negotiation and conflict resolution skills.
9. Proficient in project management software and Microsoft Office Suite.
10. PMP or equivalent project management certification is a plus.
Join us and be part of a team that values professionalism, innovation, and quality. We look forward to welcoming the successful candidate to our team.
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Scott Dennis
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $90,000 - $130,000 per year
A bit about us:
We are seeking a seasoned Project Manager to join our dynamic team in the Construction industry. This is an excellent opportunity for an experienced professional to lead, manage and deliver complex construction projects from conception to completion. The successful candidate will have a proven track record in managing construction projects, contract management, budgeting, negotiation and a deep understanding of the construction industry. This role requires a minimum of 5 years of experience in project management in the construction industry.
Why join us?
401(k) matching
Health insurance
Paid time off
Bonus opportunities
Great Culture
Work Life Balance
Job Details
Responsibilities:
1. Oversee and manage all aspects of construction projects from initiation to completion.
2. Develop and implement project strategies to ensure projects are delivered on time, within budget, and meet high quality standards.
3. Coordinate and supervise construction teams, contractors, and subcontractors to ensure tasks are carried out according to plan.
4. Manage contracts and negotiations with vendors and suppliers.
5. Develop and manage project budgets, control project costs, and ensure financial efficiency.
6. Conduct risk assessments and implement risk management strategies.
7. Facilitate effective communication and collaboration among team members and stakeholders.
8. Resolve any issues or delays that may impact project timelines or budget.
9. Ensure compliance with safety regulations and quality standards.
10. Prepare and present project reports and updates to stakeholders and senior management.
Qualifications:
1. Bachelor's degree in Construction Management, Engineering, or related field.
2. A minimum of 5 years of experience in project management in the construction industry.
3. Proven experience in construction management, contract management, budgeting, and negotiation.
4. Strong knowledge of construction processes, materials, and legal regulations.
5. Excellent leadership and team management skills.
6. Strong problem-solving abilities and ability to make decisions under pressure.
7. Excellent written and verbal communication skills.
8. Strong negotiation and conflict resolution skills.
9. Proficient in project management software and Microsoft Office Suite.
10. PMP or equivalent project management certification is a plus.
Join us and be part of a team that values professionalism, innovation, and quality. We look forward to welcoming the successful candidate to our team.
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
permanent
jobs by
✓ All jobs loaded