Engineering Journal Jobs in Montclair, NJ

The Integration Architect defines, designs, and governs enterprise integration architecture standards across AWS, Azure, Microsoft Fabric, and on-prem systems. This consultant creates scalable integration blueprints, reusable patterns, and secure connectivity frameworks that ensure interoperability, reliability, and domain-aligned data exchange. The role partners closely with domain teams, platform engineering, API management teams, and enterprise architecture to accelerate delivery while maintaining architectural integrity.

• 
  
• Define and maintain enterprise standards for API design, event schemas, messaging patterns, and integration of contracts.
  
• Establish integration governance across AWS, Azure, MS Fabric, and on-prem systems.
  
• Define patterns for ADS (Authorized Data Sources) alignment, data contracts, schema evolution, and anchor key management.
  
• Enforce adherence to enterprise security principles, including OAuth2/OIDC, JWT, TLS, Zero Trust patterns.
  

• 
  
• Build and maintain unified enterprise integration architecture blueprints spanning cloud, Fabric, and on prem connectivity.
  
• Create domain specific and cross domain integration flow maps, canonical API patterns, and event driven reference architectures.
  
• Align AWS, Azure, MS Fabric, and on-prem patterns under Unified Architecture.
  

• 
  
• Develop reusable integration patterns for:
  
  
  • 
    
  • AWS: API Gateway, Event Bridge, SNS/SQS, Lambda, Step Functions, Glue, EMR, Redshift, Lake Formation, Kinesis, AWS Batch, AWS ECR, AWS ECS Fargate.
    
  • Azure: APIM, Functions, Service Bus, Azure Data Factory (all IR types), Azure Synapse Pipelines, Azure Stream Analytics, Azure Batch, Azure Data Explorer ingestion.
    
  • MS Fabric: Data Factory pipelines, Lakehouse ingestion interfaces, Fabric Data Pipelines, Notebook-based ETL, Warehouse ingestion.
    
  • On prem: MFT, MQ, legacy services.
    
  
  
  
• Provide templates for API contracts, event schemas, integration error handling, observability hooks, and resiliency patterns.
  

• 
  
• Define integration patterns incorporating ADS rules, domain ownership, and anchor key management for interoperability.
  
• Ensure all integration patterns embed security, observability, lineage awareness, and operational resiliency.
  
• Collaborate with data governance to ensure consistent entity resolution and cross?domain identifier mapping.
  

• 
  
• Guide domain teams in implementing target state integration architectures.
  
• Lead or participate in architecture reviews for API designs, event models, platform integrations, and connectivity.
  
• Recommend modernization opportunities to retire from legacy integration mechanisms and adopt event-driven/API?first models.
  

• 
  
• 8-12+ years in integration architecture, API engineering, event-driven design, or hybrid integration.
  
• Strong hands-on expertise across:
  
  • 
    
  • AWS: API Gateway, Event Bridge, SNS/SQS, Lambda, Step Functions, Glue, EMR, Redshift, Lake Formation, Kinesis, AWS Batch, AWS ECR, AWS ECS Fargate.
    
  • Azure: APIM, Functions, Service Bus, Azure Data Factory (all IR types), Azure Synapse Pipelines, Azure Stream Analytics, Azure Batch, Azure Data Explorer ingestion.
    
  • MS Fabric: Data Factory pipelines, Lakehouse ingestion interfaces, Fabric Data Pipelines, Notebook-based ETL, Warehouse ingestion.
    
  • RDBMS: SQL, Oracle, DB2, RDS, etc.
    
  • On prem: MQ, MFT, REST/SOAP services.
    
  
  
  
• Understanding of ADS, anchor key management, data/domain contracts, lineage aware integration.
  
• Experience designing event driven, API first, batch, and hybrid integration architectures.
  

• Technical school diploma or equivalent combination of education and experience.
• Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment.
• Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments.
• Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection.
• Familiar with AQL, sampling methods and traceability.
• Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
• Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc.
• Must be a US Citizen.

• Train other inspection personnel on CMM software and manual measurement techniques.
• Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods.
• Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis.
• Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages.
• Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL
• Reconcile final inspection documentation for shipments
• Interact with source inspector as needed and part-take in source inspection duties if necessary.
• Read, understand and interpret Mechanical/Electronic drawings.
• Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step.
• Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor.
• Approve finished products by confirming specifications, conducting visual and physical measurement of the product.
• Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database
• Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs
• Work with Engineering, Operations, and other sources to resolve issues and meet goals

• Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
• Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
• Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
• Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
• Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals
• Consistently demonstrate commitment to company values
• Keep management informed of area activities and of any significant problems
• Assume responsibility for related duties as required or assigned
• Ensure that work area and work areas of direct reports are clean, secure, and well maintained
• Complete special projects and miscellaneous assignments as required

• While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud.
• This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
• This is a full-time position. Overtime and weekend work may be required as job duties demand.
• Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers.

• While performing the duties of this job, the employee is regularly required to talk and hear.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening
• The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
• 
  The employee may be required to lift and/or move items weighing up to 25 pounds.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Schedule:

Overnight Wednesday to Sunday 6pm to 5am.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

• Performs all work in accordance with established safety procedures. 
• Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.  
• Assists in the repair and adjustment of equipment.  
• Washes vehicles and equipment.  
• Conducts safety checks on vehicles.  
• Assists with service calls for breakdowns.  
• Perform other maintenance related work as required. 
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. 

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.Preform other duties as assigned.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Fuel Your Career with Us!

Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work!

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. 

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.

Requirements

• 2+ years’ experience working as a heavy-duty Diesel Mechanic
• Hydraulics experience is highly preferred
• Engine and transmission maintenance and repairs
• Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.
• Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.
• Maintain and repair exhaust systems equipped with DPF systems.
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards.
• Assists with service calls for breakdowns
• Must be able to provide own tools.
• A valid driver’s license is required.
• Preform other duties as assigned.

What We Offer?

• Competitive wage (based on experience) plus Time and a half for Overtime.
• Union Shop.
• Medical, dental, vision, life, short-term and long-term disability coverage.
• 401(k).
• Uniforms provided with laundry services.

IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.

We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

This position is for the Overnight Shift 2am - 1030am Monday to Friday

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets.  This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet.

Advanced Diagnostics & Complex Repairs

• Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:
• Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems).
• CAN-bus and multiplex electrical systems, electronic control modules, and communication networks.
• Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs.
• Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds.

Technical Leadership & Training

• Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks.
• Assist in training on:
  • Diagnostic software and tools.
  • New equipment technology, safety systems, and telematics.
  • Company maintenance standards, PM strategies, and repair procedures.

Fleet Reliability, Compliance & Continuous Improvement

• Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications.
• Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT.
• Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC).

Operational & Customer Support

• Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area.
• Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets.
• Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety.

Administrative & Leadership Duties (as assigned)

• Help plan daily shop workload and allocate jobs according to technician skill level.
• Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts.
• Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop.

• High school diploma or GED required; additional technical training strongly preferred.

• A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul.
• CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads.

• Demonstrated expert-level knowledge of:
  • Heavy truck and refuse systems.
  • Refuse hydraulic, electrical, and powertrain systems.
  • Diagnostic software, scan tools, and OEM service information.
• Proven track record of performing complex diagnostics and repairs independently.
• Must provide own professional-grade tools required for diagnostic and repair work.
• ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred.
• Possession of a valid driver’s license is required.
• Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred.
• Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred.
• Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

The City of Newark is seeking an experienced and qualified Land Surveyor to serve within the Department of Engineering as the Municipal Land Surveyor.

Under direction, the incumbent is responsible for managing and maintaining the City’s official tax maps, property records, and survey data, while providing technical and administrative support to engineering, planning and zoning, property management, public infrastructure, and legal functions.

Work is primarily performed in an office setting with field assignments as required

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Project Manager will be responsible for the leadership of complex cross-functional projects related to the development and/or sustainment of electro-mechanical medical device systems and/or single use catheters. Project assignment is at the discretion of the supervisor and is based on business requirements. Also responsible for all phases of the project, from Concept Development to Product Launch. Develop and drive project timelines, assemble required project teams, track schedule and deliverables, and maintain effective communication throughout the project.

Job Responsibilities and Essential Duties

• 
  
• Lead cross-functional project teams in support of Class I - III medical devices.
  
• Monitor and maintain awareness of new and current product regulations and standards.
  
• Develop and release all project-related deliverables, including project plan, schedule and budget.
  
• Manage a project within standardized methods and project models such as Waterfall or Agile
  
• Lead and support execution of technical and/or cross-functional project work
  
• Ensure the timely release of critical deliverables within the project.
  
• Ensure all aspects of the project are in compliance to internal procedures.
  
• Develop and present periodic status reports.
  
• Effective communication with project stakeholders, local management, and global management
  
• Demonstrate leadership when facing uncertainty.
  

• 
  
• Understanding of group dynamics to influence team members and lead the project.
  
• Instill confidence through leadership and actions.
  
• Identify, support, and promote new concepts and initiatives related to Project Management within the organization.
  

Minimum Requirements

• 
  
• BS in Engineering discipline (e.g., Systems, Biomedical, Electrical or Software Engineering) or equivalent experience
  
• Minimum of 3+ years in project lead role or project management role
  
• Preferred - experience in medical device or other regulated industry.
  
• Domestic and/or international travel up to 20%
  

Required Knowledge, Skills and Abilities

• 
  
• Experience with Microsoft Project, JIRA, Antura or other project management software
  
• Experience in leading tasks/projects through a structured, phase-gate process
  
• Lead and manage technical meetings with cross-functional members.
  
• Excellent interpersonal, verbal, and written communication skills
  
• Strong technical writing skills; must be well organized, detail oriented.
  
• Task oriented and driven to complete assignments on schedule.
  
• Must have the ability to effectively interface with both technical and non-technical personnel.
  
• Medical Device experience including thorough understanding of Medical Device Quality Management Systems (ISO 13485, 21 CFR 820, ISO 14971)
  
• Working knowledge of FDA and International Standards requirements as related to capital equipment and disposables.
  

Salary range: $120k - $140k

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

To support CS Manufacturing and support the manufacturing engineering department.

Job Responsibilities and Essential Duties

• 
  
• Observes and complies with all safety rules and regulations. This includes QSR and ISO Standards.
  
• Participates in Material Review Boards (MRB) Decision process.
  
• Identifies and implements corrective actions for manufacturing related issues.
  
• Performs equipment setup and corrective, preventative and calibration maintenance as necessary.
  
• Installs and validates equipment and processes in the production area to improve yield and/or reduce cycle time following the established validation procedure.
  
• Evaluate operating data to conduct on-line adjustments to products, instruments, or equipment. May develop or revise documents and procedures.
  
• Certifies manufacturing associates in the production processes.
  
• Evaluates and orders necessary equipment, tools, and fixtures.
  

Minimum Requirements

• 
  
• A high school diploma or equivalent is required. Associate Degree in Engineering, Science or related technical field is preferred.
  
• One to three years of technician experience in a manufacturing environment is required; Experience working in medical device manufacturing or other FDA regulated industry would be ideal.
  

Required Knowledge, Skills, and Abilities

• 
  
• Build Quality into all aspects of their work by maintaining compliance to all quality requirements.
  
• Must demonstrate effective verbal and written communication skills.
  
• Must be well organized and demonstrate the ability to work independently and manage multiple tasks and priorities. Must be flexible and demonstrate the ability to take initiative.
  
• Proficiency with Microsoft Office products such as Word and Excel or equivalent software applications is preferred.
  

The compensation range for this position is between $26-$31 per hour depending on experience and location.

#LI-MV1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

• Sets up and runs Manual Lathes

• Sets up and runs Milling Machines (Bridgeport or other)

• 
  
• Sets up and runs surface grinder
  
• Reads and interprets blueprints
  
• Properly use all types of micrometers, calipers, and other measuring instruments to measure/verify depth, blade, ID, OD, etc.
  
• Recognizes, deploys, and properly uses inserts and tooling.
  
• Performs daily and regular cleaning and light maintenance tasks on machines.
  
• Has a passion for suggesting improvements, working with people to enhance productivity across manufacturing departments as a direct result of work they do
  
• Utilizes and abides all safety procedures.
  
• Complies with all quality policies, specifications, regulations, and instructions.
  
• Shares knowledge and mentor's junior and other co-workers
  
• Must comply with ITAR employment
  

• 
  
• Effective communication and understanding of job instructions both verbally and written.
  
• Problem solving skills to identify potential issues and fix errors.
  
• Attention to detail with precision equipment and product.
  
• Ability to perform basic mathematical computations.
  
• Milling Machine Experience a must (Bridgeport or other)
  
• Ability to perform advanced mathematical computations (trigonometry and geometry) is a plus
  
• Understands and interprets CNC programs when needed is a plus.
  
• Understands and can perform tool wear offsets is a plus
  
• Skills to maintain extremely tight tolerances (as low as 0.001\") is a plus
  
• CNC Experience is a plus
  

• 
  
• High school diploma or GED required
  
• English language Skills are a must (Ability to read and speak), bi-lingual is a plus
  
• 5 years related experience and/or training or equivalent combination of education and experience.
  
• Experience with small assembly production processes, precision manufacturing is a plus
  
• Experience as a manufacturing technician performing secondary machining operations is a plus
  
• Experience setting up and /or running Wire and Ram EDM or working with EDM components is a plus
  

• 
  
• Ability to lift 40 pounds with assistance from handling equipment and co-workers.
  
• Required to stand, walk, and reach with hands and arms.
  

• 
  
• Medical
  
• Dental
  
• Vision
  
• Short Term Disability
  
• Long Term Disability
  
• PTO
  
• Paid Holidays
  
• Paid Sick Days
  
• 401K / 401K Company Match
  
• Life Insurance
  
• Paid Jury Duty
  
• Employee Referral Program
  
• Tuition Reimbursement Program based on job.
  
• Employee Assistance Program
  

• $25.00 - $38.00/Hour based on experience. \"$25.00- $38.00/Hour - \"Wage is dependent on skills and experience, possibly above listed for the most qualified and experience candidates\"