Engineering Journal Jobs in Middletown Middlesex County Ct Remote

The Manufacturing Engineer is responsible for optimizing the process capability of the assigned product group by developing and verifying processes, analyzing process flows, implementing performance improvements, and conducting long-term process monitoring. This role ensures that production operations meet safety, quality, cost, and delivery objectives through process improvements, technical support, and continuous improvement initiatives. The engineer acts as the technical liaison between design, production, quality, and maintenance teams to sustain and enhance product line performance.

Key Responsibilities:

Safety & Compliance:

• Ensure compliance with safety, environmental, and regulatory standards in all process designs and implementations.

Quality:

• Collaborate with Quality Assurance and implement best practices for process control.

Daily Operations:

• Ensure stable and efficient production processes to support execution of production plan.
• Train operators and supervisors on new processes, equipment, and quality standards.
• Provide technical guidance during equipment installation, qualification, and maintenance troubleshooting.

Process Standards:

• Update and maintain production standards in ERP (Standard Rates/Crewfactor)
• Develop, document, and maintain manufacturing process instructions, standard work, and operating procedures.

Process Improvement:

• Collaborate with Quality and Production teams to reduce setup times, improve cycle times and reduce scrap.
• Analyze production data to identify trends, inefficiencies, and opportunities for cost reduction and process improvement.
• Design and validate tooling, fixtures, and process layouts to ensure ergonomic and efficient operations.
• Monitor and improve key performance indicators (KPIs) such as throughput, downtime, and quality metrics.
• Participate in cross-functional continuous improvement activities, including Lean, 5S, and Six Sigma initiatives.

Problem Solving:

• Actively participate in root cause analysis and corrective and preventive actions (CAPA) for process-related issues, internal rejections, and customer complaints.

Communication:

• Foster open, cross-functional communication across all levels and departments to address opportunities and challenges within the product line.
• Support new product introductions (NPI) and engineering change implementations within the product line.

Key Metrics: (Product Line Performance Card)

Safety and Compliance

• Recordable Incident Rate: OSHA-reportable safety incidents per period.
• Near Miss Reporting: Frequency of safety risks reported before they become incidents.

Quality

• Customer complaints and/or returns: Frequency and type of product issues reported post-shipment.
• Scrap Rate: Pieces Scrapped / Pieces Produced
• Internal Rejections/Defect Rate: Issues found during process control checks.

Production Performance

• On-Time Delivery (OTD)
• Production Efficiency: Actual output vs. planned output.
• GMP (Good Manufacturing Practices)

Cost Control

• Product Line GPM Targets (Gross Profit Margin)
• Material Usage Variance: Difference between actual and expected material usage.

Continuous Improvement

• Kaizen Participation: Employee involvement in improvement activities.
• Downtime Analysis: Root cause tracking and reduction of unscheduled downtime.
• 5S or Visual Management Audits: Scores from housekeeping and organization assessments.
• Willingness to stay current with emerging technologies is Vital.

Qualifications:

• Education: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field.
• Experience: 3–7 years of experience in a manufacturing environment; experience supporting a dedicated product line is preferred.
• Capable of meeting and exceeding timelines.
• Strong knowledge of manufacturing processes, equipment, and production systems.
• Experience with Lean manufacturing, Six Sigma, and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram, FMEA).
• Proficiency with CAD software (SolidWorks, AutoCAD) ERP systems.
• Understanding of GD&T, process capability (Cp, Cpk), and statistical process Control (SPC).
• Strong analytical and problem-solving abilities.
• Excellent communication and collaboration skills.
• Ability to manage multiple projects and priorities in a fast-paced environment.
• Capable of working with minimal or no supervision.
• A can-do attitude.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Location: Middlefield, CT, US, 06455

The Division Vice President, Business Unit Manager (DVP, BU Manager) will be responsible for overall profit and loss performance and leading and driving growth of the Zygo business unit. They will work to thoroughly understand the business, take a hands-on approach, lead the business unit teams across multiple geographies, and be responsible for developing and implementing the Business Unit's Strategic Plan with an emphasis on AMETEK's culture and four-pronged growth strategy promoting continuous improvement, new product development, global and market expansion, and mergers & acquisitions.

Responsibilities:

• Develop the annual operating plan and meet financial commitments, including meeting or exceeding revenue, profitability and return-on-asset targets.
• Drive annual revenue growth organically while achieving growth through M&A activity.
• Develop and execute a strong growth strategy including market expansion, new product development/launch and acquisitions.
• Develop and lead a world-class operating culture and have a measurable impact on the success and growth of the overall organization. Provide strong process-driven leadership.
• Develop and articulate the annual strategic plan along with the action plans that support the execution of this strategy.
• Responsible for operating performance, e.g. sales, profit, working capital, on-time delivery, planning, scheduling, materials management, etc. Provide direct management to site and functional leaders.
• Improve the product development and launch process by developing strong product maps, shortening the current development cycle, and emphasizing NPD as a percentage of sales.
• Ensure effective product management to assist in driving market expansion.
• Utilize the current product portfolio as well as R&D plans to help drive growth.
• Develop strong product roadmaps, proactively tracing the paths of development for new applications and existing product movements in the marketplace.
• Practice strategic product management, planning the development and life cycles of all products through production.
• Develop an acquisition strategy including studying and building business cases for new investment opportunities that will create competitive advantages.
• Analyze market positioning of the various players operating in the sector for the purpose of benchmarking and identifying future business opportunities.
• Develop talent and maximize human capital including assessing the current team, identifying those with potential, providing opportunities to grow professionally, and building a succession plan for the business.

Requirements:

• 15+ years of progressive management experience and 5+ years in a senior leadership role with full P&L responsibility and full cross-functional responsibility including finance, engineering, quality, manufacturing operations, marketing/sales and human resources.
• Bachelor's degree required, a BSEE or BSME preferred. An MBA is strongly preferred.
• The ideal candidate will have managed a business with revenues of at least $100M with global experience highly preferred.
• A proven track record serving in multiple functional roles which could include engineering, operations, sales and/or marketing.
• Familiarity with the manufacturing of engineered products required.
• Candidates must have proven strategic planning skills, conducted competitive analysis, developed marketing plans, pricing strategies, etc. Experience evaluating and making acquisitions is strongly preferred.
• Proven track record of improving operational excellence (Lean, Six Sigma, Kaizen, CI and JIT), and operating metrics (OTD, operating profit margin, reducing working capital. etc.).
• Hands-on involvement in customer relationships in applicable markets; the knowledge and confidence to interact with customers and speak articulately about the products.
• Strong financial acumen and experience working for a publicly traded or Private Equity owned company continuously driven to lower costs while improving performance.
• Effective strategic leadership skills and executive attributes; the ability to foster, formulate and execute business strategies that deliver profitable growth.
• Strong analytical thinking, problem solving, and communications skills (both written and oral) with attention to detail.
• Ability to effectively communicate ideas and establish credibility to people at all levels of the organization.
• Must be self-directed and able to work well under pressure, multi-task, and meet deadlines.
• Must be a team player with excellent interpersonal skills and a commitment to relationship-building, both internally and externally; isn't afraid to roll up their sleeves.

Compensation: Salaried. Salary Minimum: $200,000+. Salary Maximum: $200,000+. Incentive: Yes.

AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.

AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

Nearest Major Market: Hartford

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Applied AI Engineer

Compensation:

• Up to $150,000 base salary (direct hire w2 only, no c2c, no 1099), (flexibility on base salary for exceptional experience)

Location:

• Hybrid / Onsite - Greater Kansas City Metro Area
• 3 days per week onsite, 2 days remote
• Candidates must currently reside in the KC metro area or be willing to relocate within a reasonable timeframe
• Fully remote candidates cannot be considered

Work Authorization:

• Must be authorized to work in the U.S.
• No current or future visa sponsorship available

Engagement Type:

• Full time, direct hire only
• No third-party agencies, consulting firms, C2C, or 1099 arrangements

About the Opportunity

Vaco Highspring is conducting a confidential search on behalf of a global enterprise organization with a strong technology footprint, including a proprietary SaaS platform and a technology?enabled services business.

The organization is making a focused investment in artificial intelligence to improve internal efficiency, modernize workflows, and embed intelligent capabilities into its software platform. This role offers meaningful ownership and visibility, with a mandate to build and deploy AI systems that have real, production level impact.

The Role

As an Applied AI Engineer, you will play a key role in integrating AI across internal systems and a customer facing SaaS platform. You will work hands on with large language models (LLMs) and modern AI tooling to automate processes, build internal tools, and deliver intelligent product features.

This is a production focused role operating at the intersection of engineering, product, and business operations, with close collaboration across teams in a hybrid/onsite environment. (3-days per week onsite in Greater Kansas City Metro Area, 2-days remote work.)

Key Responsibilities

• Design and build scalable AI powered services and tools to streamline internal workflows across multiple teams (e.g., operations, content, sales, support).
• Develop and deliver intelligent features within a proprietary SaaS platform.
• Integrate, manage, and optimize multiple LLMs and AI APIs (e.g., OpenAI style, Anthropic style, or comparable providers).
• Provide technical leadership and mentorship to other engineers, including guidance on architecture, best practices, and performance.
• Build and maintain backend systems and APIs that support AI functionality across products and services.
• Design infrastructure for model serving, orchestration, monitoring, and lifecycle management.
• Implement fallback strategies, model routing, and cost performance optimization.
• Partner cross functionally with engineering, product, and business stakeholders to identify high impact AI opportunities.
• Apply best practices related to data privacy, security, compliance, and responsible AI use.
• Stay current with advancements in AI, LLMs, and MLOps, introducing new approaches where appropriate.

Qualifications

• 6+ years of engineering experience with multiple years of experience in a production environment deploying AI/ML applications or infrastructure.
• Proven experience applying LLMs or similar AI models to real business or product challenges.
• Strong backend engineering skills (Python and/or TypeScript preferred).
• Experience with AI/ML orchestration and deployment tools (e.g., LangGraph style frameworks, Airflow like systems, Kubeflow, Ray, or workflow automation tools).
• Hands on experience with cloud platforms (AWS, GCP, or Azure) and containerization (Docker, Kubernetes).
• Front end development experience in areas like React, Node.js, Web Development, front end web product design
• Solid understanding of MLOps practices, including deployment, monitoring, logging, and evaluation.
• Knowledge of data privacy, security, and ethical AI considerations.
• Experience supporting SaaS platforms or technology driven products is a plus.
• Strong communication skills and the ability to collaborate across technical and non-technical teams.
• Passion for applying AI in practical, high impact ways.

Why This Role

• High visibility and ownership of AI initiatives
• Opportunity to build AI systems that directly impact business outcomes
• Emphasis on production grade systems, not experimentation alone
• Collaborative, hybrid environment with close access to stakeholders

Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual's skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs. With that said, as required by local law in geographies that require salary range disclosure, Vaco/Highspring notes the salary range for the role is noted in this job posting. The individual may also be eligible for discretionary bonuses, and can participate in medical, dental, and vision benefits as well as the company's 401(k) retirement plan. Additional disclaimer: Unless otherwise noted in the job description, the position Vaco/Highspring is filing for is occupied. Please note, however, that Vaco/Highspring is regularly asked to provide talent to other organizations. By submitting to this position, you are agreeing to be included in our talent pool for future hiring for similarly qualified positions. Submissions to this position are subject to the use of AI to perform preliminary candidate screenings, focused on ensuring minimum job requirements noted in the position are satisfied. Further assessment of candidates beyond this initial phase within Vaco/Highspring will be otherwise assessed by recruiters and hiring managers. Vaco/Highspring does not have knowledge of the tools used by its clients in making final hiring decisions and cannot opine on their use of AI products.

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.