Engineering Journal Jobs in Melbourne Fl Remote
329 positions found — Page 5
Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation.
Northrop Grumman Aeronautics Systems sector is hiring a Senior Principal Guidance Navigation and Controls Engineer to join our Vehicle Engineering team of qualified, diverse individuals in Melbourne, Florida.
Responsibilities may include:
- Lead the Guidance, Navigation, and Control system engineering requirement maturation
- Lead the integration of autopilot and auto throttle capabilities into the Vehicle Management System
- Lead subsystem level certification activities
Basic Qualifications
- Bachelor of Science (BS) in a Science, Technology, Engineering, or Mathematics (STEM) discipline and 8 years of relevant experience; OR Master of Science (MS) in a STEM discipline and 6 years of relevant experience
- Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company.
- Knowledge of fixed-wing aircraft dynamics
- Knowledge of fly-by-wire control systems
- Experience in system engineering requirement definition, verification, and validation
- Experience analyzing non-linear simulations of aircraft closed-loop responses
- Experience creating certification test procedures and test cases
- Working knowledge of autopilot and autothrottle capabilities into Vehicle Management Systems
- Working knowledge of Flight Management Systems, including RNAV
- Experience using MATLAB to create, process, analyze, and visually represent data.
- Experience using Simulink to model dynamic systems.
- Experience using Model Based System Engineering tools
- Familiarity with programming (C/C++, Python)
Preferred Qualifications
- Experience developing and integrating autopilot and autothrottle capabilities into Vehicle Management Systems
- Experience with Flight Management Systems, including RNAV
- Experience using CAMEO to create system requirement models
- Experience using System Composer to create software architecture
- Experience with MIL-STD-1797B
- Experience with AS94900 or MIL-STD-9490
- Experience with DO-178C
- Experience for Atlassian tool suite (Jira, Confluence, Bitbucket)
#AS-FA3
Primary Level Salary Range: $122,800.00 - $184,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.Description:
Controls & Systems Analyst to support both our industrial automation projects. This role blends hands-on engineering—such as site surveys, control panel design, and automation support—with internal software development, troubleshooting, and system enhancements. If you enjoy solving technical problems, working across teams, and balancing customer-facing and internal project work, this role is for you.
What You'll Do
- Conduct site surveys and collaborate with customers and project teams to define technical requirements.
- Review bid specs, drawings, and documentation to support accurate project quoting.
- Design industrial control panels, including layouts, wiring diagrams, and hardware selection.
- Support internal business systems through analysis, coding, testing, and maintenance of applications.
- Coordinate resources and timelines for larger system projects.
- Troubleshoot user issues, provide technical guidance, and support system improvements.
- Maintain high-quality documentation for both automation and software projects.
- Collaborate with engineering, operations, IT, and customer teams to ensure successful project outcomes.
What You Bring
- Bachelor's degree in Computer Science, Information Systems, Engineering, or related field preferred.
- Experience in controls engineering and industrial automation support preferred.
- Familiarity with PLCs, HMIs, VFDs, sensors, and industrial electrical principles.
- Electrical CAD drawing experience (AutoCAD or BricsCAD preferred), CAD macro scripting a plus.
- Strong communication, troubleshooting, and documentation skills.
- Customer-focused mindset and ability to work cross-functionally.
- Valid driver's license with insurable driving record.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
Intern - Manuscript Editing
Chicago (Hybrid)
The Journal of the American Medical Association (JAMA), published continuously since 1883, is an international peer-reviewed general medical journal. JAMA is a member of the JAMA Network family of journals, which includes 11 specialty journals and JAMA Network Open. The JAMA Network provides access to the research, reviews, and opinions shaping the future of medicine.
At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.
We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.
Join the JAMA team as an Intern. This is a hybrid position reporting into our Chicago, IL office, requiring 1 day a week in the office.
RESPONSIBILITIES:
- Preference is for an individual who is underrepresented in the medical writing/editing community (see American Medical Writers Association 2022 DEI survey).
- This person would train with senior manuscript editors, working with the AMA Manual of Style, reading sections and completing quizzes on style topics.
- They would observe and participate in the daily activities of JNO and specialty journal manuscript editors to get a sense of what the job is like.
- They would meet with Graphics, Production, Proofreading, and other teams with whom manuscript editors collaborate.
- Under the supervision of the Managing Editor and Assistant Deputy Managing Editor, they would edit commentaries with the eventual goal of editing a Research Letter.
May include other responsibilities as assigned
REQUIREMENTS:
- The intern should be a 3rd or 4th year student at 4-year college, majoring in English, journalism, or life sciences who is interested in pursuing a career in medical editing.
This role is a non-exempt position and the hourly rate for this position is $20. This is the highest rate we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration, geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.
The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.
We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.
THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION
Apply NowShare Save JobRemote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
