Engineering Journal Jobs in Galloway Ohio

Job Summary Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.

Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.

Record all maintenance issues in maintenance log for each line.

Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.

Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.

Assist maintenance mechanics in work that requires two people or when operational needs demand.

Perform facility/building project work as assigned.

Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.

Assemble and test equipment to verify correct operation and production.

Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.

Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.

Ability to certify on all industrial lift equipment.

Pickers, Reaches, Skates, Booms, Scissor lifts, etc.

Oversee projects as assigned.

Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.

Oversee, inspect, and monitor the routine maintenance provided by junior engineers.

Will also provide guidance and training as needed.

Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.

Graduate of an apprenticeship program or hold current trade certification.

Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).

Must be willing to learn new equipment as it is brought on-line.

Physical activities necessary to perform one or more essential functions of the position.

Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.

fork truck).

- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.

and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.

The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.

Medline will not pay less than the applicable minimum wage or salary threshold.

Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.

For a more comprehensive list of our benefits please click here .

For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.

We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.

We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.

Explore our Belonging page here .

Medline Industries, LP is an equal opportunity employer.

Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.

AUTOMOTIVE TECHNICIANS/MECHANICS COME GROW WITH THE TEAM AT PERFORMANCE CHRYSLER JEEP DODGE RAM GEORGESVILLE! EXCELLENT COMPENSATION
- GREAT OPPORTUNITY GENEROUS SIGN ON BONUS
- up to $5,000!!! YEARLY RETENTION BONUS- up to $3,000!!! WILL PAY TOP DOLLAR FOR EXPERIENCE IN CHRYSLER!!!!! Performance Chrysler Jeep Dodge Ram Georgesville, located in Columbus, OH, is GROWING, and want you to join their award winning service team!! They are looking for ALL LEVELS OF TECHNICIANS! Don’t miss out on this great opportunity! The service shop is expanding and the workload is increasing! Performance CDJR is adding a second shift to their rotation
- 5:00 pm to 3:00 am.

Job Responsibilities: Confer with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Perform quality inspections of vehicle repairs prior to returning the vehicle to the customer Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.

Communicate directly with the service advisor so that customers can be informed if any additional service is needed.

Providing an estimate of time needed for additional repairs Execute repairs under warranty to manufacturer specifications Job Requirements: Minimum of 1 year of experience as an automotive technician (automotive mechanic) Automotive Service Excellence (ASE) certifications preferred Must have automotive dealership experience Comfortable with flat-rate pay Hold a valid driver’s license Team oriented, flexible and focused on maintaining a high level of customer service Working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, AC equipment, etc.) Valid driver's license with an acceptable driving record Must be able to pass a pre-employment drug screen and background check Dealership Commitment: Generous sign on bonus- up to $5,000! Yearly Retention bonus- up to $3,000! Paid Training! Competitive Wages! Paid Time Off! Paid Uniforms! 401k! Health, Dental, Vision and Life Insurance! Short and Long Term Disability Insurance! State-of-the-Art facility! Call Mike Sanders at 614-632-4149 if interested in this great opportunity! Apply Now!

AUTOMOTIVE DIESEL TECHNICIANS GROW YOUR CAREER AT PERFORMANCE CHRYSLER JEEP DODGE RAM! Open to Relocation
- Generous Compensation!! GENEROUS SIGN ON BONUS
- up to $5,000!!! YEARLY RETENTION BONUS- up to $3,000!!! Performance Chrysler Jeep Dodge Ram in Columbus is expanding, and want you to join their award winning service team!! Currently, they are looking for experienced Diesel Technicians! Don’t miss out on this great opportunity! Due to their recent expansion and increased work load, they will be running two shifts! The second shift will run from 5:00 pm to 3:00 am.

APPLY TODAY! Job Duties include: Conferring with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements Examining vehicles to determine wear and extent of damage or malfunctions Assisting the shop foreman/lead technician in recruiting and hiring qualified service technicians as well as assisting technicians with their skills, providing technical support when needed and monitoring performance and productivity Testing and adjusting repaired systems to meet manufacturers' performance specifications Ensuring that the shop is in excellent condition in regard to cleanliness, safety, and equipment condition, and conducting periodic spot checks to maintain high-quality service Test-driving vehicles, and testing components and systems, using equipment such as infrared engine analyzers, compression gauges and computerized diagnostic devices Job Requirements: Chrysler experience/certification highly preferred, but not required Dealership experience is required Comfortable with flat-rate pay Automotive Service Excellence (ASE) certifications preferred Have at least 2 years of experience as a diesel automotive technician Valid driver's license with an acceptable driving record Must be able to pass a pre-employment drug screen and background check Dealership Commitment: Generous Sign on Bonus- up to $5,000 Yearly Retention Bonus- up to $3,000 Paid Training! Competitive Wages! Paid Time Off! Paid Uniforms! 401k! Health, Dental, Vision and Life Insurance! Short and Long-Term Disability Insurance! Call or text Mike Sanders at 614-632-4149 if interested in this position or any other position with Performance Chrysler Jeep Dodge Ram!! Apply now!!

Master Level Mechanic / Automotive Master Mechanic / Master Mechanic GENEROUS SIGN ON BONUS
- up to $5,000!!! YEARLY RETENTION BONUS- up to $3,000!!! WILL PAY TOP DOLLAR FOR EXPERIENCE IN CHRYSLER!!!!! Performance Chrysler Jeep Dodge Ram Georgesville, located in Columbus, OH, is now hiring Automotive Master Technicians
- Chrysler Certification is preferred, but not required for this role.

Their shop has expanded and the workload is increasing! They are adding a second shift to our rotation for those that are interested- 5:00 pm to 3:00 am.

Job Responsibilities: Confer with customers or service advisors to obtain descriptions of vehicle problems, and to discuss work to be performed and future repair requirements Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Perform quality inspections of vehicle repairs prior to returning the vehicle to the customer Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.

Communicate directly with the service advisor so that customers can be informed if any additional service is needed.

Providing an estimate of time needed for additional repairs Execute repairs under warranty to manufacturer specifications Job Requirements: Chrysler certification HIGHLY PREFERRED but not required Minimum of 5 years Automotive Technician experience ASE Master Certification required if not FCA Master Certified Team oriented, flexible and focused on maintaining a high level of customer service Must have working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, AC equipment, etc.) Must have a valid driver’s license Must be able to diagnose and repair Dealership Commitment: Generous sign on bonus- up to $5,000! Yearly Retention bonus- up to $3,000! Paid Training! Competitive Wages! Paid Time Off! Paid Uniforms! 401k! Health, Dental, Vision and Life Insurance! Short and Long Term Disability Insurance! Call or text Mike Sanders at 614-632-4149 if interested in this opportunity with Performance Chrysler Jeep Dodge Ram! Apply Now!

Job Summary This position assists with repairing and maintaining the physical assets of the division and supports the Maintenance Team in all functions related to maintaining all production equipment and spare parts.

Job Description Responsibilities: Sets up, adjusts, performs preventive maintenance, troubleshoots, repairs, and maintains assigned equipment with responsibility for production and quality Monitor and maintain all building and production systems as assigned.

Responsible for 24-hour emergency maintenance service as scheduled.

Makes preventive maintenance check and inspection of assigned equipment, reports to Shift Supervisor, and takes appropriate action Analyzes mechanical and operational problems, makes necessary corrections and runs adjustments to maintain maximum production and quality Tests equipment to verify correct operation and production of quality products Create a spare parts program and take on the responsibility of ordering all spare parts for the Maintenance Department and manage these orders through the system to ensure receipt of all orders and payment to vendors.

Update all technical SOPs for the Maintenance Department (preventative maintenance, machine operating procedures, etc.) with support from the Engineering team.

Act as the main contact person for all vendors that support facilities maintenance (fire protection, pest control, compactor maintenance, HVAC, boiler maintenance, fire control, etc.), and maintain a file of all service and ensure that all vendors provide service to RCW per the frequency described in the vendor preventative maintenance schedule.

Point of contact for all vendors that support facilities maintenance (fire protection, pest control, compactor maintenance, HVAC, boiler maintenance, fire control, etc.), and maintain a file of all service and ensure that all vendors provide service to RCW per the frequency described in the vendor preventative maintenance schedule.

Ensure all vendors are set up in SAP.

Maintain inventory controls for cost effective operations.

Required Experience: Education High school diploma or equivalent required.

Work Experience: Experience working in a technical or mechanical environment is a plus.

Some plant or maintenance experience.

Must be experienced in Microsoft Office applications (Outlook, Word, Excel).

This job requires exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Preferred Qualifications: High school diploma or equivalent required.

Experience working in a technical or mechanical environment is a plus.

Have technical background to support the needs of the mechanics and the parts that must be ordered for efficient sourcing from the appropriate vendors.

- SAP experience is a plus Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.

The anticipated salary range for this position: $21.25
- $30.75 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.

Medline will not pay less than the applicable minimum wage or salary threshold.

Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.

For a more comprehensive list of our benefits please click here .

For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.

We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.

We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.

Explore our Belonging page here .

Medline Industries, LP is an equal opportunity employer.

Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.