Engineering Journal Jobs in Frisco Remote

Technology Design Engineer

✦ New

$86,800 - 165,200

Mckinney, TX 1 day ago

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG Position Role Type:
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).
Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.
Interface with factory, program, and customer personnel to implement design improvements.
Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.
This 1st shift role will be 100% on-site and based in McKinney, TX.

Experience with data analysis using MATLAB.
S. government issued security clearance is required. S. citizens are eligible for a security clearance.

MS in Electrical Engineering is a PLUS.
RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.
Experience using Keysight ADS and Mentor Graphics Xpedition design software.
Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:
Click on this link to read the Policy and Terms

permanent

E

Manufacturing Process Engineer

✦ New

🏢 Excelon Solutions

Salary not disclosed

Plano, TX 1 day ago

Title: Manufacturing Process Engineer with medical device

Location: Plano, TX - Onsite

Qualification: Bachelor’s in Mechanical engineering or Manufacturing engineering or equivalent

JD:

• Minimum experience of 4 years in Medical devices - Manufacturing Engineering.

• Good Experience working on Process Validations (IQ, OQ, PQ)

• Experience developing manufacturing processes and technologies, which includes process characterization

• Experience working on PFMEAs

• Experience performing Data analysis (Minitab)

• Evaluate process and design alternatives based on Design for Manufacturability principles.

• Ability to work within a team and as an individual contributor in a fast-paced, changing environment.

• Strong verbal and written communications with ability to effectively communicate at multiple levels in the organization.

• Multitasks, prioritizes and meets deadlines in timely manner.

• Strong organizational and follow-up skills, as well as attention to detail.

• Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments.

Not Specified

E

Technical Support Specialist

✦ New

🏢 Enterprise Solutions Inc.

Salary not disclosed

Allen, TX 5 hours ago

Job Title: Technical Support Specialist

Location: Allen, TX 75002

Duration: 6 Months with the possibility of Extension

Work Shift: 7:00 am to 6:00 pm (M-F)- 8 Hours a day

Pay Range: $25 - $27/hr. on W2

Job Description:

This Technical Support Specialist II will be supporting our Vehicle Intelligence team, providing technical support to the ALPR (Automatic License Plate Reader) Division.

Job Description

The Technical Support Specialist II will be interacting with police and is responsible for diagnosing and resolving customer issues through phone, web, email, and direct customer interaction.
They are also responsible for maintaining critical relationships developed by other departments throughout the problem/resolution cycle.
Communicate outages notifications and ticket statuses to customers
Additionally, they will communicate actively with the Product team and Engineering departments detailing specific customer issues.
Answer Inbound and make Outbound Technical Support Calls (about 30 to 40 calls/day)
Self-assign and take ownership of tickets from queue
Accurately document product issues and convey workarounds and fixes to customers.
Follow procedures for internal escalation of issues to the appropriate internal teams.
Track and resolve issues
Interface with Product team and Engineering on customer issues and comments
Help Maintain online Knowledge Base
Provide Technical Assistance to Regional Sales Managers daily

Experience and Skill Requirements

2–3+ years of experience in Technical Support and/or application support roles.
Experience in a remote technical support environment is a plus.
Foundational knowledge of ITIL is a plus.
Extensive Hardware, Software and Networking troubleshooting.
Strong working knowledge of Windows Server 2016, 2012, 2008; Windows 7, 8, 10.
Strong working CLI experience with various Linux distributions (Ubuntu/CentOS preferred).
Familiarity working with Azure Cloud and containers.
Familiarity with technology and products is a plus.
Strong troubleshooting, problem-solving and analytical skills.
Strong communication skills (verbal, written and presentation).
Good time management skills with the ability to set priorities and meet deadlines.
Strong working knowledge of Routers, switches, VLANs, VPN, DHCP, TCP/IP.
Strong working knowledge of various WIFI technologies and practices.
Knowledge of Virtualization platforms, Hyper-V and VMWare, a plus.
Strong working knowledge of internet protocols and certificates (HTTPS, SSL/TLS, etc.).
Experience with PowerShell Scripts.

Education Requirements

One or more of the following certifications preferred: CompTIA A+, MCP, MCSE, CNA, CCNA, Linux Certifications.
Minimum High School degree. An Information Technology College degree is preferred
Previous technical support/engineering/troubleshooting experience

Enterprise Solutions Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Not Specified

Software Engineer II - Embedded

✦ New

🏢 Raytheon

$68,900 - 131,100

Mckinney, TX 1 day ago

Date Posted:

2026-02-05

Country:

United States of America

Location:

US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required on day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We have an exciting opportunity for a Software Engineer II – Embedded to join our development team in McKinney-TX.

What You Will Do:

Deliverables include but not limited to:

Supports all aspects of a software development life cycle as members of a multi-disciplined team. This would include supporting new and legacy military and commercial programs from concept and requirements, to design, development, integration, test, and potentially subsequent maintenance tasking.
Uses and provides creative solutions to complex technical system and software integration problems.
Works closely with Systems Engineers to design ideal solutions with the end user and operational needs in mind.
The ability to obtain and maintain a Secret U.S. government issued security clearance and a Special Access Program security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Work onsite at McKinney, TX [relocation eligible]
This position will require occasional business-related travel.

Qualifications You Must Have:

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) AND a minimum of 2 years of prior relevant experience.
Experience in object-oriented programming.
Experience in developing, testing, and integrating real-time software applications written in C++ or closely related software languages.
Experience in Shell or Perl or Python scripting language.
Active and transferable U.S. Government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

Experience working in lab environments with physical hardware (e.g., test benches, simulators)
Some development experience on Linux, VxWorks, or other Real Time Operating Systems is highly preferred.
Ability to quickly understand and navigate complex systems and established code bases.
Experience with product development utilizing the Scrum techniques of the Agile software development process.
Experience with DevSecOps pipeline implementation and utilization, including Static Code Analysis, Automated Build, and Automated Test techniques using continuous integration/continuous delivery with Test-Driven Development approach.
Hands-on experience with Git for version control and GitLab for repository management.
Ability to manage multiple priorities.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

Relocation Eligible – Relocation assistance available
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

permanent

F

Software Engineer

🏢 FinThrive

Salary not disclosed

Plano, TX 3 days ago

About the Role

Impact you will make

Software Engineer with FinThrive is responsible for the design and development of new features and tools to support our industry leading healthcare software. This position also supports and maintains existing products for growth and development of our Patient to Payment technology suite. The ideal candidate will have experience with software development practices and patterns, as well as direct experience in supporting enterprise-level cloud-based solutions. Collaborating on a high energy team that provides an opportunity for flexibility of responsibility, schedule and location.

You will help create and maintain our software and establish best practices. Key impact:

Create or update components of multi-million-dollar revenue claims products
Work with cutting edge web technologies and modernize older applications
Build cloud based software using modern CI/CD practices

What you will do

Develop new features and maintain/enhance existing functionality
Work within and maintain an extensible and performant system architecture
Perform code review, unit test coverage, and continuous improvement
Monitor and fix security vulnerabilities
Support automation and productivity
Communicate effectively with team members and project leadership about technical deliverables and hurdles
Seek opportunities to incorporate new technologies into the product's technology stack when they can add value
Work directly with support organizations to resolve production issues
Provide application support by analyzing defects, replicating/fixing defects and providing root cause analysis for defects
Troubleshoot and resolve functional and performance related issues
Update documentations for code written, deployment instructions, and support

What you will bring

Bachelor's degree in software engineering or related field; alternative 4+ years of software engineering experience
Experience in developing software in an Agile environment
Good knowledge of Visual Studio, C#, ASP.Net MVC, ASP.Net, SQL, WebAPI
Experience with modern web development with modern JS and TS frameworks
Angular experience
OOD & Design Patterns, e.g., Inversion of Control (Microsoft Dependency Extensions / Autofac/Unity)
Experience with unit testing frameworks (nUnit, Moq, MSTest, nspec, etc.)
Excellent oral and written communications skills
Basic understanding of CI/CD and integration of automation into CI/CD
Effective communication skills and ability to collaborate with developers and product owners

What we would like to see

Strong understanding of .NET
Azure Knowledge
Continuous Integration experience and understanding
Automated Testing & Continuous Integration experience
Test Driven Development (TDD) experience
Cloud base software development experience
Healthcare domain knowledge, specifically in the areas of Patient Accounting, HIM, Revenue Cycle and IT integration
Knowledge of software development best practices; proven ability to monitor code quality and unit test coverage, security vulnerabilities

About FinThrive

FinThrive is advancing the healthcare economy.
For the most recent information on FinThrive's vision for healthcare revenue management visit /why-finthrive.

Award-winning Culture of Customer-centricity and Reliability

At FinThrive we're proud of our agile and committed culture, which makes FinThrive an exceptional place to work. Explore our latest workplace recognitions at careers#culture.

Our Perks and Benefits

FinThrive is committed to continually enhancing the colleague experience by actively seeking new perks and benefits. For the most up-to-date offerings visit /careers-benefits.

FinThrive's Core Values and Expectations

Demonstrate integrity and ethics in day-to-day tasks and decision making, adhere to FinThrive's core values of being Customer-Centric, Agile, Reliable and Engaged, operate effectively in the FinThrive environment and the environment of the work group, maintain a focus on self-development and seek out continuous feedback and learning opportunities
Support FinThrive's Compliance Program by adhering to policies and procedures pertaining to HIPAA, FCRA, GLBA and other laws applicable to FinThrive's business practices; this includes becoming familiar with FinThrive's Code of Ethics, attending training as required, notifying management or FinThrive's Helpline when there is a compliance concern or incident, HIPAA-compliant handling of patient information, and demonstrable awareness of confidentiality obligations

Physical Demands

The physical demands and work environment characteristics described here are representative of those that a colleague must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Statement of EEO
FinThrive values diversity and belonging and is proud to be an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. We're committed to providing reasonable accommodation for qualified applicants with disabilities in our job application and recruitment process.

FinThrive Privacy Notice for California Resident Job Candidates

Know Your Rights
Pay Transparency Notice

FinThrive is an Equal Opportunity Employer and ensures its employment decisions comply with principles embodied in Title VII, the Age Discrimination in Employment Act, the Rehabilitation Act of 1973, the Vietnam Veterans Readjustment Assistance Act of 1974, Executive Order 11246, Revised Order Number 4, and applicable state regulations.
2024 FinThrive. All rights reserved. The FinThrive name, products, associated trademarks and logos are owned by FinThrive or related entities. RV092724TJO

| FinThrive Careers | FinThrive Benefits & Perks | Physical Demands

Not Specified

Power Distribution and Make Ready Designer (Remote) (Akron)

🏢 Sigma Technologies, Ltd.

Salary not disclosed

Akron, Ohio, Remote 2 days ago

Description:

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Akron, OH / Remote (U.S.)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

Requirements:

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22
#Remote

PI103b1a8bddaa-38

Remote working/work at home options are available for this role.

temporary

Power Distribution and Make Ready Designer (Remote) (WICHITA)

✦ New

🏢 Sigma Technologies, Ltd.

Salary not disclosed

WICHITA, Kansas, Remote 5 hours ago

Description:

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Wichita, KS (Remote)