Engineering Journal Jobs in Carmichael Sacramento County Ca Remote

The Building Engineer reports to the Chief Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties.

Issues may range from tenant improvement work to preventive maintenance and repair of all building systems. This must be done in a manner that not only protects, but also maximizes the value of the property. The Building Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff. Teamwork and collaboration are critical to this position's success. The portfolio currently consists of six buildings, totaling 546,440 SF.

• Operate, maintain, and log all HVAC and MEP equipment under the direction of their supervisor.
• Complete tenant service requests, and develop and maintain positive tenant relations through prompt, courteous response to tenant requests.
• Perform preventive maintenance and repairs on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Duties include, but are not limited to changing filters, coil cleaning, greasing motors, replacing light bulbs & ballasts, inspecting/adjusting belts, and regular inspections of equipment
• Maintain computerized or manual equipment logs that detail preventive work performed.
• Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.
• Assist in ordering stock and inventory of parts and supplies, as needed.
• Respond immediately to emergency situations and customer concerns.
• Review elevator maintenance records and confirm elevator maintenance is performed per national agreement. Inspect condition of elevator machine rooms. Report any elevator deficiencies to their supervisor.
• Assist with review of tenant improvement plans. Inspect active construction areas and confirm contractors are following all building rules and regulations.Coordinate fire alarm and sprinkler shutdown and drain downs with contractors as needed.
• Coordinate all quarterly fire alarm testing and maintenance with building vendor.
• Maintain and operate life safety/fire systems
• Perform carpentry and snow removal, if necessary.
• Take meter readings on all meters and equipment as directed by their supervisor.
• Perform minor repairs on doors, hardware, lock, windows, ceilings, and floors
• Troubleshoot, evaluate and make recommendations to upgrade maintenance operations and/or implement savings opportunities.
• Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance.
• Inspect buildings, grounds and equipment for unsafe or malfunctioning conditions and report to management
• Inspect new installation for compliance with building codes and safety regulations
• Comply with all applicable codes, regulations, governmental agency and company directives, as related to building operations and practice safe work habits
• Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.

General Maintenance and Operation Duties:

• Understand OSHA guidelines and how to ensure that all equipment is maintained to guidelines/standards.
• Read and follow written and oral instructions.
• Convey thoughts and recommendations orally and/or in writing to supervisors, contractors and others in order to resolve building-related problems.
• Operate and use necessary manual and power-driven tools.

• High school diploma or GED equivalent required.
• Minimum 3-5 years of building maintenance experience or commensurate experience in a trade (plumbing, electrical, HVAC).
• HVAC or electrical technical school training preferred.
• Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.
• Experience with automated building management systems
• Ability to interpret mechanical, electrical blueprints and schematics
• Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines.
• Must be team oriented and a problem solver.
• Strong verbal and written communication skills.
• Manage own time on a daily basis with little supervision
• Must be able to handle multiple projects, changing priorities, and continually heavy workloads
• May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments)
• Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device
• Lift and carry objects of up to 50 lbs. for distances of up to 30 feet
• Climb ladders and stairs.
• Maintain professional appearance and manner at all times while in the complex.
• Will be required to perform off site duties through the use of a personal vehicle.
• Must have a valid driver's license.
• If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.

The RMR Group offers an extensive total rewards package to ensure that your benefits align with your needs. Employees who work at least 21 hours per week are eligible to participate in The RMR Group's benefits plans, including:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Life & Disability Insurance
• Health Savings Account (HSA) & Flexible Spending Plans (FSA)
• 401(k) Plan with Employer Match
• Holidays, Vacation & Sick Time
• Parental Leave
• Tuition Assistance
• Matching Gift Program
• Wide Array of Voluntary, Employee-Paid Benefits to choose from including Critical Illness & Accident Insurance, Identity Theft Protection & Pet Insurance

The estimated base compensation range for this position is $75,000 to $90,000 per year. RMR considers several components including an individual's skills, qualifications, experience, internal equity, and market data.

The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR's vertical integration is strengthened by nearly 900 real estate professionals in more than 30 offices nationwide who manage approximately $40 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a "Top Place to Work", by the Environmental Protection Agency (EPA) as an "ENERGY STAR Partner of the Year" and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.

RMR's mission is to create long term value for our clients by managing their investments and assets "like we own it" - an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided by six core values:

• Integrity at Our Core.
• Perform Passionately and Effectively.
• Inspired Thinking.
• Like We Own It.
• Power of We.
• Mutual Respect.

Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.

Follow RMR on LinkedIn and Instagram @thermrgroup.

The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here.

Harris & Bruno International (H&B), a printing equipment and spare parts manufacturer, is seeking full-time CNC Machinist III ($30-$35 p/h) & CNC IV/Programmers ($36-$45 p/h). See below for both job descriptions.

CNC Machinist III ($30-$35 P/h)

This is a highly skilled, senior-level machinist responsible for setting up and operating CNC equipment to manufacture precision components. This role serves as a technical expert on the shop floor, leading complex machining projects, troubleshooting issues, and mentoring junior machinists to ensure quality, efficiency, and continuous improvement.

Expectations

• Set up and operate CNC mills for complex, tight-tolerance parts
• Edit and optimize CNC programs (G-code or CAM-generated)
• Interpret advanced engineering drawings, GD&T, and specifications
• Select appropriate tooling, fixtures, and machining strategies
• Perform first article inspections and in-process quality checks using precision measuring tools
• Troubleshoot machining issues, including tooling, programming, and material challenges
• Optimize cycle times and improve manufacturing processes
• Lead or support continuous improvement initiatives (lean, 5S, etc.)
• Train, mentor, and provide guidance to CNC Machinist I & II team members
• Collaborate with engineering and quality teams to resolve design or production issues
• Maintain equipment and ensure proper machine upkeep
• Follow all safety and quality procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training or apprenticeship preferred)
• 5–10+ years of CNC machining experience in a manufacturing environment
• Advanced experience with CNC mills (multi-axis preferred)
• Basic programming skills (G-code and/or CAM)
• Deep understanding of GD&T and blueprint reading
• Proficiency with precision measurement tools (micrometers, calipers, height gauges, CMM exposure a plus)
• Experience machining a variety of materials (aluminum, steel, stainless, etc.)
• Strong troubleshooting and problem-solving skills
• Ability to work independently with minimal supervision

Preferred Qualifications:

• Experience with 4-axis and 5-axis machining
• Lean manufacturing or continuous improvement experience
• Leadership or team lead experience
• Familiarity with ERP/MRP systems

CNC lV/Programmer ($36-$45 p/h)

This is a senior-level technical expert responsible for full-cycle CNC programming, setup, and operation of complex precision components. This role leads advanced machining strategies, develops efficient programs using CAM software, and drives continuous improvement across machining processes. This position supports engineering and manufacturing by assisting with troubleshooting, process development, and manufacturability improvements, while mentoring machinists and supporting production excellence.

Expectations

• Develop, write, and optimize CNC programs using CAM software (e.g., Mastercam, Fusion 360)
• Set up and operate CNC mills and/or lathes for highly complex, tight-tolerance parts
• Interpret advanced engineering drawings, CAD models, and GD&T requirements
• Design and recommend tooling, fixtures, and workholding solutions
• Lead new part introduction (NPI) from print to production
• Perform program prove-outs, first article runs, and process validation
• Troubleshoot and resolve complex machining, tooling, and programming issues
• Optimize cycle times, tool life, and overall machining efficiency
• Collaborate closely with engineering to improve part manufacturability (DFM feedback)
• Mentor and train CNC Machinist I–III team members
• Establish and document standardized work instructions and setup sheets
• Support continuous improvement initiatives (Lean, 5S, Kaizen)
• Ensure compliance with quality standards and safety procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training strongly preferred)
• 8–12+ years of CNC machining experience, including advanced programming
• Expert-level proficiency with CNC mills (multi-axis required)
• Advanced CAM programming experience (Mastercam, Fusion 360, or similar)
• Strong G-code knowledge and ability to edit programs at the machine
• Deep understanding of GD&T and blueprint interpretation
• Experience with complex materials (stainless steel, tool steels, aluminum, etc.)
• Proficiency with precision inspection tools; CMM experience preferred
• Proven ability to troubleshoot and optimize machining processes
• Ability to work independently and lead technical projects

Preferred Qualifications:

• 4-axis and 5-axis machining expertise
• Fixture design experience
• Lean manufacturing or Six Sigma exposure
• Experience with ERP/MRP systems

Both Positions:

Physical Requirements:

• Standing/Walking: Must be able to stand and walk for extended periods.
• Lifting/Carrying: Must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds.
• Manual Dexterity: Requires the use of hands and fingers to handle, feel, reach, and operate tools, measuring instruments, and computer controls.
• Vision Requirements: Must have close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus to inspect parts and read precision measuring instruments.
• Hearing and Communication: Must be able to hear machine sounds, alarms, and verbal instructions in a noisy environment.
• Postural Requirements: Must be able to bend, stoop, kneel, crouch, and occasionally climb or balance while loading materials or accessing machinery.
• Work Environment: Exposure to moving mechanical parts, metal shavings, noise, coolant, and shop odors. Personal protective equipment (PPE) such as safety glasses, hearing protection, and safety shoes are required.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Position Summary:

Harris & Bruno is seeking a highly organized and technically capable Capital Equipment Project Manager to support the delivery, installation, and demonstration of our coating and embellishment equipment for the printing industry. This role serves as the primary technical and project coordination contact for customers during machine builds, installations, and startups, while also acting as an internal resource across sales, service, engineering, production, and marketing teams. The position ensures projects remain on schedule, customers are prepared for successful installations, and demonstrations and production of samples are executed to a high standard.

Key Responsibilities:

Project Management & Coordination

• Manage projects associated with Harris & Bruno equipment, including auxiliary coating systems and full machinery platforms (ZR, ZRW, ZRX).
• Coordinate cross-functional efforts between engineering, production, service, sales, and marketing to ensure projects stay on schedule and aligned with customer requirements.
• Track project milestones, identify risks, and proactively communicate status updates internally and externally.

Customer Technical Liaison

• Serve as the primary technical point of contact for customers during pre-installation, installation, and startup phases.
• Communicate facility requirements, utility needs, and site readiness expectations to customers.
• Support customers in understanding startup materials, consumables, and operational prerequisites.

Installation & Startup Support

• Assist in planning and execution of machine installations and commissioning activities.
• Work closely with service teams to ensure smooth handoff from build to installation and support resolution of technical issues.

Internal Support & Collaboration

• Act as a technical resource for sales during pre-sales discussions and project handoff.
• Support engineering and production by clarifying customer requirements and guiding build priorities.
• Provide input to marketing on machine capabilities, applications, and customer use cases.

Demonstration Room & Applications Support

• Support operation and scheduling of the Harris & Bruno demonstration room.
• Assist with customer demos, trials, and sample production.
• Produce samples for customer evaluation, sales efforts, and marketing initiatives.
• Help maintain demo equipment readiness and documentation.

Qualifications

• Experience in project management within manufacturing, capital equipment, or industrial machinery environments.
• Strong technical aptitude with mechanical systems; printing, coating, or converting industry experience is highly preferred.
• Ability to communicate technical concepts clearly to customers and internal stakeholders.
• Strong organizational skills with the ability to manage multiple projects simultaneously.
• Comfortable working cross-functionally in a fast-paced manufacturing environment.

Preferred Skills & Attributes

• Familiarity with printing presses, coating systems, or inline converting equipment.
• Experience supporting machine installations or customer-facing technical roles.
• Strong problem-solving skills, adaptability, and attention to detail.
• Ability to balance customer-facing responsibilities with internal project coordination.

Reporting & Impact

This role works closely with sales, engineering, service, production, and marketing teams and plays a critical role in customer satisfaction, on-time delivery, and successful adoption of Harris & Bruno equipment.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Pilot—CBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY!

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region: Homestead, FL and CAMB: Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR

• Apply on USAJOBS ; OR

• Apply on Airline Apps.

Stay Updated – Opt into CBP's talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*

Position Summary:

Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.

As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.

You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.

Responsibilities include but not limited to:

• Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms

• Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions

Qualifications:

• Hands-on experience engineering and supporting cloud-based telephony or contact center platforms

• Strong understanding of VoIP technologies, SIP, and call routing concepts

• RingCentral and RingCentral Contact Center engineering

• NiCE inContact / CXone administration and development

• Cyara or similar modern telephony orchestration platforms

• Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments

• Solid knowledge of networking concepts related to real-time communications

Preferred Qualifications:

• Supporting remote contact center agents

• REST API integrations and automation

• Scripting using PowerShell or Python

• Workforce management, call recording, or speech technologies

• PSTN carrier and phone number lifecycle management

This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.

#LI-Hybrid**This position willhave a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Intern - Manuscript Editing

Chicago (Hybrid)

The Journal of the American Medical Association (JAMA), published continuously since 1883, is an international peer-reviewed general medical journal. JAMA is a member of the JAMA Network family of journals, which includes 11 specialty journals and JAMA Network Open. The JAMA Network provides access to the research, reviews, and opinions shaping the future of medicine.

At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.

We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.

Join the JAMA team as an Intern. This is a hybrid position reporting into our Chicago, IL office, requiring 1 day a week in the office.

RESPONSIBILITIES:

• Preference is for an individual who is underrepresented in the medical writing/editing community (see American Medical Writers Association 2022 DEI survey).
• This person would train with senior manuscript editors, working with the AMA Manual of Style, reading sections and completing quizzes on style topics.
• They would observe and participate in the daily activities of JNO and specialty journal manuscript editors to get a sense of what the job is like.
• They would meet with Graphics, Production, Proofreading, and other teams with whom manuscript editors collaborate.
• Under the supervision of the Managing Editor and Assistant Deputy Managing Editor, they would edit commentaries with the eventual goal of editing a Research Letter.

May include other responsibilities as assigned

REQUIREMENTS:

1. The intern should be a 3rd or 4th year student at 4-year college, majoring in English, journalism, or life sciences who is interested in pursuing a career in medical editing.

This role is a non-exempt position and the hourly rate for this position is $20. This is the highest rate we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration, geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.

The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.

We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.

THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

• Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

• Perform analysis, design, development, and integration on medium to high level complexity assignments.

• Develop and support automation capabilities through webservices and APIs.

• Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

• Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

• Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

• Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

• Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

• Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

• 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

• Familiarity with SAP ICM/APM and ALM modules.

• Strong problem-solving skills and ability to manage multiple priorities.

• Excellent communication skills and ability to work cross-functionally.

• Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

• SAP Certification in relevant Modules

• Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

• Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

• Ability to work independently and as part of a collaborative team.

• Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here