Engineering Journal Jobs in Campbelltown, PA
9 positions found
ARM Group LLC is looking for a self-driven and energetic Staff Engineer who is looking to grow and embodies an ownership mentality. The Staff Engineer will collaborate with a team of multi-disciplined engineers and scientists, project managers, CAD designers, and other staff to service our client’s needs. This role will support a wide range of projects related to our Energy & Power practice area in the areas of erosion and sediment control design, stormwater management design, and land development engineering.
The successful candidate will assist in performing engineering calculations, writing reports, and creating/updating design drawings using CAD and assist with client and regulator communications. This role may also support our solid waste management, environmental services, geotechnical engineering, oil and gas, water resources, and construction administration practice areas.
Location: This position can be filled in our Hershey, PA office.
Requirements
- Prepare, review, and update design drawings and investigation reports for commercial/industrial and utility scale solar projects throughout the Mid-Atlantic region.
- Observe and monitor field work to analyze possible problems.
- Perform and/or check technical calculations related to erosion and sediment control design, stormwater management design, and related land development engineering.
- Research code, zoning, ordinances, and other requirements as needed to ensure project compliance.
- Prepare reports, letters, emails, permit applications, etc. for projects.
- Collaborate with other team members to meet deliverables on project and obtain further knowledge and experiences.
- Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
- Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.
Base Requirements:
- Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.
- Experience with Autodesk Civil 3D or equivalent engineering software.
- A self-starter possessing strong communication, planning and organizational skills.
- Desire to work on multiple projects in parallel rather than a single large project for months.
- Proficiency in Microsoft Office Suite.
- Requires travel to job sites and occasionally out of the local area overnight stay.
- Valid drivers license
Preferred Requirements:
- E.I.T. certification preferred, but the opportunity to obtain certification can be developed.
Your Wellness, Our Priority: A Look at Our Benefits
We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.
Job Title: Pavilion Craftsman
Company: Country Lane Gazebos
Location: New Holland, PA Country Lane Gazebos is hiring a Pavilion Craftsman to join our production team in New Holland, PA. We build high-quality outdoor structures that are shipped across the country and internationally. What You'll Do:
As part of the Pavilion Production Team, you will help build pavilion components from start to finish.Material Preparation:
Select lumber, measure accurately, and cut materials while minimizing waste.Precision Craftsmanship:
Cut and assemble materials according to engineered drawings and specifications using hand and power tools.Quality Focus:
Inspect your work to ensure all parts meet company standards for fit, finish, and strength.Efficiency & Safety:
Operate tools and equipment safely (including pneumatic nailers) and keep your work area clean and organized. What You Bring:A dependable, professional attitude.
Strong work ethic and ability to work in a fast-paced production setting.
Attention to detail and pride in quality workmanship.
Ability to communicate and work well as part of a team.
Willingness to learn new skills and processes.
Physical ability to lift, lower, push, and pull up to 100 lbs. Desired (But Not Required to Apply):Experience in woodworking, construction, or manufacturing.
Forklift experience (training and certification provided).
Ability to read blueprints or technical drawings. Safety is Our Priority:
We maintain a safe work environment and provide safety training, including:
- Proper use of pneumatic tools (safety glasses and hearing protection required).
- Safe operation of machinery.
- Forklift certification (provided and required before operating equipment).
Financial Security: Retirement plan with employer match, Company Paid Life Insurance, Short-Term and Long-Term Disability Insurance.
Time Off: Paid Time Off (PTO) and paid holidays.
Growth & Support: Training opportunities and an Employee Assistance Program (EAP).
Additional Benefits: 10-year employee incentive program, team events, and company meals.
Stability: Join a growing company that values quality work and reliable team members. Ready to get started? Apply today. Country Lane Gazebos provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any characteristic protected by federal, state, or local laws.
Compensation details: 18-25
PIb5887c4ca88d-26289-39635742
Quality Assurance Manager
ATTRACTIVE SKILLS / EXPERIENCES:
- Bachelor's Degree in Chemistry, Biology, Engineering or related field (required)
- Experience (3+ years) in a leading/managing a Quality Department/Group
- Demonstrated knowledge of ISO standards (9001; 14001; 15378) along with cGMP
- Experience and knowledge with MS Office applications (especially MS Excel)
- Experience and knowledge with SAP and electronic QMS systems
- Demonstrated communication skills (written / oral) including the ability to read/speak English
- Ability and willingness to work in office and in a production floor setting with moderate noise
- Ability and willingness to work in fast-paced, matrix structured organization
- Willing to work traditional business hours (8am to 5pm) during weekdays (M-F) with the flexibility to accommodate supporting the 24/7 shift schedule
SUMMARY / RESPONSIBILITIES:
- Assist in developing department budget and investment plan(s) according to strategic goals
- Cultivate employee talent through training and coaching measures, while also conducting employee performance reviews
- Support the development and updating of Quality Assurance programs, policies, processes, procedures and controls
- Review, analyze and report on quality discrepancies related to SCHOTT products, while developing disposition and corrective actions for product discrepancies
- Manage the review of batch records and avoid impacting shipment dates
- Manage Department Training Coordinator activities and projects
- Manage document control activities to include, releasing, archiving, tracking and reporting of the document review process for controlled documents
- Lead and support the implementation of Systems and Compliance Improvements including site compliance, along with data integrity requirements
- Measure and analyze Quality System trends
- Oversee the internal audit function to ensure ongoing compliance to the Quality Management System (QMS)
- Maintain the Archive Room and document retention requirements
- Write and revise Standard Operating Procedures (SOPs) and provide training, as required
- Manage the CAPA and Change-Control process to include, issuing, reviewing and approving steps
- Support all customer or registrar quality related audits and/or evaluations
- Utilize quality tools, including Compliant-PRO, etc., for information, tracking and reporting purposes, as required by the Pharm Business Unit
- Manage assigned CAPA(s) by performing root cause investigations, while defining resolution actions; implement preventive and corrective actions in a timely manner as a result of customer complaints or customer audit findings
- Help promote and implement safety/EHS directives and maintain a clean and safe workspace
- Assure compliance with ISO certifications and cGMP, along with adherence to Company policies and procedures and Code of Conduct/safety guidelines
Look no further!
The Borgen Project is an international organization that works at the political level to improve living conditions for people impacted by war, famine and poverty.
With 20 years of experience in the advocacy space, The Borgen Project has worked to support the passage of numerous bills that have benefitted close to 500 million people in developing countries.
Writer/Journalist Internship: The role is focused on content creation for BORGEN Magazine or The Borgen Project Blog . This is a part-time 12-hours per week, 12 week, unpaid remote internship. If your availability is limited, you can work ahead and complete the program in fewer weeks.
.
Responsibilities will include:
Article writing.
Researching topics.
Assisting with The Borgen Project's advocacy efforts.
Assisting with fundraising. Create a personal fundraising campaign and meet targets.
Experience:
No prior experience is necessary, we're looking for people who are passionate about fighting poverty and righting wrongs, regardless of your GPAs/background.
Details:
This is an unpaid internship, although college credit is available.
Start Date:
New programs begin every month, you choose the month you wish to start.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Manufacturing Engineer II (sterile)
COMPANY: SCHOTT Pharma USA (Lebanon, PA) has been providing advanced solutions and services to the global pharmaceutical and biotechnology industries for over 100 years. SCHOTT Pharma USA offers an extensive and scientifically proven product portfolio including vials, syringes, cartridges and Fast Track Kits, for the safe storage and administration of injectable drugs worldwide.
ATTRACTIVE SKILLS/EXPERIENCES:
- Bachelor’s Degree in Mechanical, Electrical, Chemical, Industrial/Manufacturing, Pharmaceutical or Materials Engineering (required)
- Six Sigma Certifications and/or PMP (preferred)
- Experience (4+ years) in a regulated manufacturing setting (Pharma; BioTech; Medical Device; Primary Packaging)
- Experience leading Project/CAPEX (up to $500K)
- Experience with Validation and QMS (URS; FMEA; VMP; IQ/OQ/PQ) - Author/Review protocols/reports, manage deviations/CAPA and change control
- Experience leading new equipment / NPI validations (FAT/SAT; commissioning; start-up)
- Demonstrated knowledge of Lean/CI principles (5S; Kaizen; DMAIC; Root Cause; 5-Why; Fishbone)
- Demonstrated knowledge with SAP, MS Project (Gantt / Critical Path), SolidWorks and Minitab
- Proven knowledge of cGMP and ISO Standards (9001; 15378)
- Demonstrated communication skills (written / oral) including the ability to read/speak English
- Ability and willingness to work in fast-paced, matrix structured organization
SUMMARY / RESPONSIBILITIES: This Manufacturing Engineer II (sterile) will lead validated, compliant CAPEX projects and new product/equipment introductions that improve OEE, reduce scrap, and integrate seamlessly into production, on-time and on-budget. Other potential duties/expectations include (but not limited to)…
- Own and control project scopes, schedules and budgets; manage risks/issues and communicate status to stakeholders
- Lead cross functional execution with Production, Quality, Maintenance, Supply Chain, EHS, and Global Engineering
- Manage CAPEX, PO releases, FAT/SAT planning, cost tracking/forecasting and accruals; deliver fiscal year plan on time and on budget
- Prepare and maintain audit ready documentation aligned to US cGMP
- Operate in accordance with standard cleanroom conduct consistent with ISO 14644 practices and internal QMS and site Contamination Control Strategy
- Own change controls (local and global)- initiation, risk assessment, execution plan, verification of effectiveness and closure
- Lead/support validation and qualification for equipment, products, processes, etc.
- Integrate into operations; plan trials and downtime, coordinate line readiness/tech transfer, create/update SOPs, define PM requirements and maintenance plans, ensure spares/training are in place
- Support quality investigations
- Drive continuous improvement with Lean to improve OEE, scrap rates, uptime and cycle times
- Mentor/train Engineers and Technicians (no direct reports); structured troubleshooting/problem solving and Best Known Methods; develop quick-reference guides/checklist, where needed
- Promote safety and EHS and adhere to all Company policies, procedures and guidelines
- Perform other duties as assigned
We are seeking individuals to review and provide feedback on everyday money-management tips. This role focuses on common financial challenges such as managing expenses, reducing spending, and making smarter financial choices.
You will review examples of budgeting methods and evaluate practical ideas people use to stretch their income. The goal is to understand which approaches work best for real households.
The work is flexible and fully online. Applicants should have an interest in budgeting, saving money, or improving financial habits.
No formal finance background is required.
Remote working/work at home options are available for this role.
Salary: $80,000
- $140,000 per year A bit about us: Employee-owned consulting firm based in Lebanon, Pennsylvania.
Our team of professional engineers, land surveyors, CADD technicians, drone pilots, inspectors and support staff offers a variety of services, including civil engineering, water and wastewater engineering, environmental engineering, electrical engineering, land surveying, drone services, subdivision and land development planning, erosion and sediment pollution control planning, NPDES permitting, parks and recreation planning, grant writing and municipal consulting.
Why join us? Great Company Culture Strong Benefits Flexible Schedule Immediate Growth Potential Strong Leadership Capabilities Fantastic Retirement Benefits Yearly Bonuses Job Details Responsibilities will include but are not limited to the design and permitting of construction plans for site layout, grading, drainage, erosion control, stormwater treatment and conveyance, water and sewer, roadway, pump station and force main design.
This individual will also provide technical and design services in support of civil engineering projects reporting directly to their project manager.
Applicant must be able to communicate and coordinate technical evaluations and designs, produce reports in technical writing format, and correspond with other team members to complete work in a timely and efficient manner.
Must have the ability to coordinate project submittals, facilitate regulatory agency approvals, and obtain construction permits.
Experience: Bachelor of Science Degree in Civil or Environmental Engineering.
Professional Engineering License Required Experience with AutoCAD Civil 3D and Microsoft Office required.
Hydraflow Storm Sewer, Hydrograph, and WaterCad preferred.
Must have strong communication and writing skills.
Experience with design of land development projects preferred.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
At Powerback, we're on a mission to improve lives. As the leader in physical, occupational, speech, and respiratory therapies, we help older adults stay active and thrive while providing essential therapy for children at home and in school.
With over 38 years of trusted service, our reach spans skilled nursing centers, assisted and independent living facilities, outpatient clinics, and home-based care. We're proud to deliver personalized care exactly where and when it's needed most.
Join an industry-leading team that restores hope and makes a lasting impact. If you're passionate about making a meaningful difference and want to be part of the future of rehabilitation and wellness, Powerback is the place for you.
Why Powerback?
- Benefits: We offer Medical, Dental, and Vision plans to Full-Time team members. We offer Dental and Vision to Part-Time team members.
- Paid Time Off: We offer generous paid time off to Full-Time and Part-Time team members.
- Support for New Grads: Our Powerback Clinical Mentorship Program kicks off on day one, helping you learn from the best in the field.
- Continuing Education: Keep growing with free CEUs through Medbridge.
- H-1B Visa & Relocation Assistance: We support Visa or Green Card sponsorships, plus our Journey Travel Program lets you work across the U.S. with the security of a full-time role.
- Perks at Powerback: Enjoy exclusive discounts on Wireless/TV, Home/Auto/Renters and Pet Insurance, Childcare, Eldercare, and more. Earn rewards through our PowerZone Employee Recognition Program, and expand your expertise with our Clinicians in Action professional development program.
Performs airway care and maintenance.
Manages artificial ventilator status as directed by an approved protocol.
Maintains and troubleshoots mechanical ventilators.
Participates in cardiopulmonary resuscitation procedures of bag ventilation and closed chest massage.Initiates, monitors and documents performance of various respiratory care modalities.Performs assessment of residents' cardiopulmonary status utilizing physical assessment and history taking skills, laboratory findings, radiological studies of the chest, pulmonary function testing and professional judgment to formulate a respiratory care plan upon the order of a physician.Performs various tasks prior to treating a resident as follows:
Check physician's orders for completeness.
Orders to include: diagnosis, ICD -10 code, type and duration of therapy, type and dosage of medication, FI02 and frequency.
Check resident's chart for history, physical and for pertinent information to determine precautions to be observed at bedside.
Observe and chart: pulse, respiration, breath sounds (number and quality), and resident's general appearance, including breathing exercises and teaching and training to residents.
Notify supervisor of all new starts and discontinued residents.Administers proper technical respiratory care procedures. Dispenses proper dosage of medication, acquires and adjusts devices to insure optimal results from therapy. This includes mask, mouthpiece, or Trach equipment for resident's comfort and ease of operation, regulates flow and pressure of equipment. Observes resident's respiratory rate and pattern, pulse, breath sounds, reaction to medication, any difficulty with therapy during and after treatment. Chart and communicate to the resident's nurse any pertinent information. Observe thorough and accurate charting technique.Inspects and tests equipment, disassembles, cleans, reassembles equipment as required. Maintains adequate supply of necessary equipment. Performs administrative duties and record keeping when required. Disposes of equipment properly.Assists in emergency cardio-pulmonary resuscitation as an integral part of the emergency team. Therapist is required to be CPR certified.8. Initiates, administers, evaluates response to, and documents all therapy modalities according to departmental procedure and ordered by a physician including: intermittent positive pressure breathing, hand held nebulizer, chest physical therapy modalities, including percussion, vibration, breathing and cough retraining exercises, deep tracheal suctioning, incentive spirometry, sputum induction.Recognizes resident's adverse reaction to therapy modalities and takes correct action.Documents all resident care services rendered as part of a medical record.Accepts and transcribes verbal orders related to respiratory care procedures.Sets up, maintains and records log entries on all types of oxygen and respiratory supplies and equipment as required.Instructs residents and family members in the rationale and methodology of every respiratory procedure administered to each resident to facilitate resident cooperation, understanding and efficiency of treatment. Work towards set goals to reach maximum rehabilitation potential.Attends internal and external educational programs and reads appropriate professional journals in order to maintain and enhance technical skills and clinical competencies.Participates in interdisciplinary resident rounds and conferences to plan and evaluate effective resident care.Participates in quality assurance program data collection as assigned.Responsible for the effective and efficient delivery of rehab services; adherence to an established plan of care, department and patient(s)' schedule, and timely documentation of services.Participates in general equipment troubleshooting and specific tasks to optimize accuracy of diagnostic equipment including quality control methods and preventive maintenance and calibration.Performs other duties as assigned. Qualifications: * A Respiratory Therapist must have a high level of knowledge of respiratory therapy and practice required through completion of a NBRC approved and accredited program and one year of clinical practice experience under medical direction.* Must have a current Basic Cardiac Life Support certification and current State Licensure for a Respiratory Care Practitioner. Posted Salary Range: USD $36.00 - USD $39.00 /Hr.
