Engineering Journal Impact Factor Jobs in Oak Brook

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

At Noratel Group, we design and manufacture customised transformers and wound magnetic components that power critical technologies across renewable energy, healthcare, transportation, and industrial automation. For more than a century, Noratel has been trusted for engineering excellence, reliability, and customer-focused solutions that perform where it matters most.

With more than 2,200 employees worldwide, Noratel operates production facilities across Europe, Asia, and North America. One of these is Shape LLC, located in Addison, Illinois, and part of Noratel’s Magnetics Cluster. Shape specialises in mission-critical, custom electrical transformers for demanding equipment manufacturers - combining the strength of a global group with the agility and collaboration of a local team.

Driven by: Passion, Accountability, Customer Focus, Teamwork, and Excellence (PACTE), we foster a workplace where people support one another and consistently strive for high standards.

These values shape how we work every day and they guide the way we build our teams. To support continued operational excellence at our Shape LLC site in Addison, IL, we are now looking for a Procurement Manager who combines structure, ownership, and a hands-on mindset with a collaborative approach.

This is a hands-on, operational role focused on ensuring reliable material availability, strong supplier partnerships, and cost-effective procurement practices that support production continuity.

The successful candidate will be a structured and proactive professional, comfortable managing purchasing workflows, negotiating with suppliers, monitoring inventory, and collaborating closely with Production, Engineering, Quality, and Finance.

Key Responsibilities

Purchasing & Material Management

• Manage daily purchasing activities, including PO creation, confirmations, follow-up, and delivery tracking
• Ensure timely availability of raw materials, components, and indirect supplies
• Maintain accurate ERP data (pricing, lead times, MOQ, supplier details)
• Monitor inventory levels and coordinate with Production Planning to avoid shortages or excess stock

Supplier Management

• Act as the primary point of contact for suppliers
• Maintain strong relationships with existing suppliers and identify new sourcing opportunities as needed
• Monitor supplier performance (on-time delivery, quality, responsiveness)
• Support resolution of supply disruptions and quality issues

Cost Control & Negotiation

• Identify and support cost-reduction initiatives through negotiation and improved purchasing terms
• Monitor price developments, market trends, and BOM cost impacts
• Track and report Purchase Price Variance (PPV)

Process, Compliance & Documentation

• Maintain purchasing records, contracts, certifications, quotations, and supplier files
• Ensure compliance with internal procedures and purchasing guidelines
• Support implementation of Kanban or vendor-managed inventory solutions where applicable

Cross-Functional Collaboration

• Support Engineering during NPI activities and RFQ/RFP processes
• Work closely with Operations to manage demand variability and supply continuity
• Partner with Finance on invoice discrepancies and supplier payment alignment
• Coordinate with Quality on supplier evaluations and corrective actions

Performance & Reporting

• Track and report key procurement KPIs (OTD, inventory levels, MOQ adherence, PPV)
• Contribute to continuous improvement initiatives focused on lead time reduction and supply stability
• Provide regular updates to the Director of Operations on risks, shortages, and supplier performance

Qualifications & Skills

• Degree in Supply Chain, Business Administration, Procurement, or a related field
• 3–5+ years of experience in purchasing or supply chain roles within a manufacturing environment
• Solid understanding of procurement processes and inventory management
• Proven negotiation skills and working knowledge of contracts and commercial terms
• Strong communication skills, both written and verbal
• ERP experience required (Sage 500 is a plus)
• Analytical mindset with strong attention to detail and data accuracy
• Highly organised, dependable, and disciplined in follow-up
• Professional, ethical, and results-oriented

What we offer

• A hands-on procurement role with real ownership and visible impact on daily manufacturing operations
• Employment in a stable, well-established manufacturing company within a global industrial group
• A collaborative site environment, supported by the resources and expertise of the Noratel Group
• Close cross-functional cooperation with Production, Engineering, Quality, and Finance
• A culture driven by clear values (PACTE), accountability, and continuous improvement
• Compensation range of $100,000–$120,000, aligned with role scope and experience
• Healthcare coverage and a Paid Time Off (PTO) plan

At Shape, you’ll find the closeness of a local team with the strength of an international group.

Here, your work will matter - for our people, for our company, and for the industries we serve.

Ready to take ownership of procurement in a hands-on manufacturing environment? Apply today and help shape the future of Shape LLC within the Noratel Group.

Find out more at:

Job Description: Licensed Professional HVAC Design Engineer

Reports To: President

FLSA: Exempt

IF INTERESTED IN THIS POSITION, PLEASE EMAIL RESUME TO:

Company Overview

Admiral Heating has been a trusted leader in commercial and industrial HVAC solutions in the Chicagoland area for over 70 years. Specializing in union construction projects and service work, we partner with contractors, developers, and building owners to deliver custom engineered heating, ventilation, and air conditioning solutions. Our reputation is built on quality workmanship, deep industry relationships, and a commitment to long-term customer success.

Admiral Heating operates on EOS (Entrepreneur Operating System). Our Core Values which we require all employees to exemplify are: Safety and Quality First, Intensely Diligent, Own it!, Innovative Approach, Proudly Humble of our Reputation and Exceed Expectations.

IF INTERESTED IN THIS POSITION, PLEASE EMAIL RESUME TO:

Job Duties and Responsibilities:

• Develop, review, and approve mechanical system designs for HVAC systems.
• Prepare and certify engineering drawings, technical specifications, and calculations in accordance with applicable standards and regulations.
• Conduct system load analyses, equipment selections, and energy performance evaluations.
• Oversee all phases of project development from concept through construction completion.
• Coordinate with multidisciplinary teams including architectural, electrical, civil, and structural engineering professionals.
• Perform field inspections and provide technical support during construction and commissioning.
• Ensure all designs comply with state and local building codes, ASHRAE, IMC, and NFPA standards.
• Provide technical guidance, mentorship, and quality assurance oversight for junior engineering staff.
• Participate in project meetings, client presentations, and design reviews.
• Maintain a current understanding of emerging technologies, materials, and industry trends relevant to mechanical systems design

Qualifications, Competencies, & Abilities:

• Extensive knowledge of mechanical systems and the ability to design commercial HVAC, duct, and piping systems.
• Proficiency in HAP and E20 software.
• Strong knowledge of AutoCAD and ability to prepare and review detailed drawings.
• Experience in design-build delivery, construction administration, or BIM coordination.
• LEED accreditation or demonstrated experience with sustainable design practices.
• Excellent command of the English language, including grammar, spelling, and written composition.
• Exceptional organizational and time management skills.
• Self-motivated, with the ability to work independently and manage multiple priorities.
• Strong attention to detail and analytical problem-solving skills.
• Effective interpersonal and communication skills, both verbal and written.
• Ability to work collaboratively with individuals at all levels of the organization, including executives.

Physical Demands and Working Environment:

The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

• Environment: Work is performed primarily in a standard office environment.
• Physical: Primary functions require sufficient physical ability and mobility to work in an office setting; to stand or sit for prolonged periods of time; to occasionally stoop, bend, kneel, crouch, reach, and twist; to lift, carry, push, and/or pull light to moderate amounts of weight; to operate office equipment requiring repetitive hand movement and fine coordination including use of a computer keyboard; to travel to other locations using various modes of private and commercial transportation; and to verbally communicate to exchange information.
• Vision: See in the normal visual range with or without correction.
• Hearing: Hear in the normal audio range with or without correction.

Education and Experience:

• Bachelor’s degree in Mechanical Engineering MEP
• Active Professional Engineer (PE) license in the State of Illinois
• Fluent with Microsoft Office Suite.
• 7 Plus Years’ experience minimum, 10 Plus preferred
• Extensive knowledge of HVAC, duct work and piping
• Proficiency in HAP, E20, and AutoCAD suite software

Compensation and Benefits

• Base Salary Range $120,000 - $180,000
• Bonus and Profit Sharing up to 30% of base salary
• Fidelity 401k Plan with all fees paid by Admiral
• 401k Safe Harbor Match of 4%
• BCBS PPO and HMO Health Insurance Options (Admiral pays 75%)
• Dental and Vision Plans (Admiral pays 75%)
• Tuition Reimbursement
• Generous PTO Policy
• Paid Holiday’s
• 100% Admiral paid Long and Short Term and Short
• $20,000 Admiral Paid Life Insurance
• Flexible Spending and Dependent Care Accounts
• Employee Assistance Plan
• CTA and Parking Reimbursement
• Employee events throughout the year

IF INTERESTED IN THIS POSITION, PLEASE EMAIL RESUME TO:

This job description does not list all the duties of the job. You may be asked by managers to perform other instructions and duties. This job description may be revised from time to time and does not constitute a contract for employment.

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz.

Associate Director, Operations
SHIFT: Wednesday - Saturday (4:30am - 3:30pm)

Factor_ a brand of HelloFresh is seeking an Associate Director Operations. As the Associate Director in operations, you will focus on operations organizational strategy and lead projects associated with cross functional engagement of staffing, training, talent development teams across the business unit. This will include aligning all support teams to a business vision of how we attract, retain and optimize both direct and indirect team members. Additional effort will be to support strategic launch initiatives including rolling out new technologies, processes and manufacturing facilities. If you're looking to impact the outcome of the business and to the lives of our team members, this is it!

You will...

• Identify organizational gaps in people operations and drive continuous improvement strategies to mitigate
• Collaborate with cross functional support teams of operations and their leadership develop a cohesive organizational strategy
• Run projects associated with new facility launches, new processes changes, and technology implementations
• Champion initiatives associated with direct labor training, onboarding, and experience
• Support cross functional strategy related to salaried development including partnering with operations leaders and HRs to ensure engagement and team morale
• Drive Safety, Quality, Cost, and Delivery, while growing and expanding capabilities that meet production mandatory requirements
• Indirectly lead operational partners to accomplish projects and initiatives
• Share and exchange operational best practices across our national sites
• Guide programs to reward and recognize performance
• Mentor, train and develop operations teammates for career progression and learning
• Create a positive team dynamic that encourages all employees to: provide feedback and drive change within the facility, adapt to the ever-changing business and stay focused on the customer experience
• Drive a customer-focused environment committed to delivering the highest quality product to our customers

You are...

• Team-oriented: you have a track record of leading cross-functional teams and cultivating collaborative partnerships at all levels and departments of an organization
• Strategic: you recognize and resolve situations that are ambiguous or challenging and use logic to identify alternatives, evaluate, and present approaches to solving complex problems while thinking in terms of contingency plans
• Bold: you're adventurous, outgoing and optimistic; you're confident making decisions and taking calculated risks
• Entrepreneurial Spirit: you have the vision, passion, and imagination; you are not afraid to ask 'what if' and constantly challenge the status quo
• Versatile: you roll with the punches and don't get overwhelmed easily; you enjoy grinding away at issues and have a knack for delivering results in hyper-growth, constantly changing environments
• Analytical: data is your friend; you're able to translate numbers into action and pave the way for efficiency
• Customer-focused: slightly obsessive-compulsive when it comes to customer experience and strive to deliver a product that is second to none
• Comprehensive background in Fulfillment, Shipping, Receiving, and Warehousing
• Motivated, developed and managed employees - our culture is a critical part of our success, and you need to help drive it
• Excitement for working in a fast-paced environment with a high level of ambiguity and change
• Interest in spending most of your time on the shop floor to learn and understand process details
• Continuous improvement and project management skills
• High level of integrity and ethics with excellent follow-through

At a minimum, you have...

• Bachelor's Degree required - Master's preferred
• 8+ years of experience in operations or people management
• Familiarity with FSMA, HACCP, SQF
• Knowledge of Lean manufacturing
• Project Management Certifications preferred
• Flexibility to travel

You'll get...

• Competitive hourly rate, 401K company match that vests immediately upon participation, & team bonus opportunities
• Generous PTO and flexible attendance policy
• Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment
• Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_)
• Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+
• Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain

This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors.

#Factor #JD1008

This position is also eligible for the HelloFresh equity plan.

About HelloFresh

We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work!

At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities.

We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form.

To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn.

HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

• Europe:
• APAC:
• United States:
• Canada:

• Develop, implement, and improve manufacturing processes for electronic products.
• Collaborate with R&D and design teams to ensure designs are manufacturable and cost-effective.
• Identify and troubleshoot production issues, providing effective solutions.
• Support process validation, equipment qualification, and production ramp-up activities.
• Implement Lean Manufacturing and continuous improvement initiatives.
• Develop and maintain work instructions, process documentation, and standard operating procedures.
• Analyze production data to identify trends, inefficiencies, and areas for improvement.
• Support supplier and internal audits related to manufacturing processes.

Qualifications:

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, Mechanical Engineering, or a related technical field.
• 3+ years of experience in manufacturing engineering, preferably in electronics production.
• Strong understanding of PCB assembly, electronic components, soldering processes, and testing.
• Experience with process improvement methodologies: Lean, Six Sigma, Kaizen.