Engineering Journal Elsevier Jobs in Mckinney
39 positions found — Page 2
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).
Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.
Interface with factory, program, and customer personnel to implement design improvements.
Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Experience with data analysis using MATLAB.
S. government issued security clearance is required. S. citizens are eligible for a security clearance.
MS in Electrical Engineering is a PLUS.
RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.
Experience using Keysight ADS and Mentor Graphics Xpedition design software.
Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. Collaborate with hardware and software teams to develop test procedures and
Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
Test event support activity may require travel which is not expected to exceed 20%.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
Modeling and simulation for Electronic Warfare (EW) or radar systems.
Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).
Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.
Interface with factory, program, and customer personnel to implement design improvements.
Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Experience with data analysis using MATLAB.
S. government issued security clearance is required. S. citizens are eligible for a security clearance.
MS in Electrical Engineering is a PLUS.
RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.
Experience using Keysight ADS and Mentor Graphics Xpedition design software.
Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-05Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
We have an exciting opportunity for a Software Engineer II – Embedded to join our development team in McKinney-TX.
What You Will Do:
Deliverables include but not limited to:
- Supports all aspects of a software development life cycle as members of a multi-disciplined team. This would include supporting new and legacy military and commercial programs from concept and requirements, to design, development, integration, test, and potentially subsequent maintenance tasking.
- Uses and provides creative solutions to complex technical system and software integration problems.
- Works closely with Systems Engineers to design ideal solutions with the end user and operational needs in mind.
- The ability to obtain and maintain a Secret U.S. government issued security clearance and a Special Access Program security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
- Work onsite at McKinney, TX [relocation eligible]
- This position will require occasional business-related travel.
Qualifications You Must Have:
- Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) AND a minimum of 2 years of prior relevant experience.
- Experience in object-oriented programming.
- Experience in developing, testing, and integrating real-time software applications written in C++ or closely related software languages.
- Experience in Shell or Perl or Python scripting language.
- Active and transferable U.S. Government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer:
- Experience working in lab environments with physical hardware (e.g., test benches, simulators)
- Some development experience on Linux, VxWorks, or other Real Time Operating Systems is highly preferred.
- Ability to quickly understand and navigate complex systems and established code bases.
- Experience with product development utilizing the Scrum techniques of the Agile software development process.
- Experience with DevSecOps pipeline implementation and utilization, including Static Code Analysis, Automated Build, and Automated Test techniques using continuous integration/continuous delivery with Test-Driven Development approach.
- Hands-on experience with Git for version control and GitLab for repository management.
- Ability to manage multiple priorities.
What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Relocation Eligible – Relocation assistance available
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Collaborative. Respectful. A place to dream and do. These are just a few words that describe what life is like at Toyota. As one of the world's most admired brands, Toyota is growing and leading the future of mobility through innovative, high-quality solutions designed to enhance lives and delight those we serve. We're looking for talented team members who want to Dream. Do. Grow. with us.
An important part of the Toyota family is Toyota Financial Services (TFS), the finance and insurance brand for Toyota and Lexus in North America. While TFS is a separate business entity, it is an essential part of this world-changing company- delivering on Toyota's vision to move people beyond what's possible. At TFS, you will help create best-in-class customer experience in an innovative, collaborative environment.
To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position at this time.
The Toyota Motor Credit Corp. (TMCC) Accounting Department is looking for passionate and highly motivated Accounting Managers/Consultants.
The primary responsibility of this role is to ensure accurate and timely preparation and delivery of financial results in conformity with US GAAP and IFRS while supporting department and company-wide initiatives to develop our business and grow internal capabilities.
Toyota's TMCC Accounting Department has multiple Accounting Manager/Consultant positions open. As we progress through the interview process with highly qualified candidates, we will share specific available roles and help match candidate interests with the right opportunity. Open positions may span a range of departments, including Loan and Lease Accounting, Insurance Accounting, Treasury Accounting, Financial Reporting, or others.
Provide training, development, and support for direct reports and other team members through real-time feedback. Challenge the status quo by taking calculated risks and move the department forward. Build trusting working relationships with direct reports and peer groups. Influence peers and management to work towards departmental goals. Perform timely review of journal entries, account reconciliations, analytical procedures, and financial reporting deliverables. Responsible for the accuracy and oversight of monthly/quarterly and annual accounting and reporting processes (including SEC, parent company, management and regulatory reporting). Present financial results to Accounting leadership. Lead and support accounting projects. Ensure that the SOX control processes have been designed properly, documented and are being executed appropriately. Support quarterly reviews and audits performed by both external and internal auditors. Research and identify new/changes to accounting guidance, products, systems, and business processes. Implement needed adjustments to incorporate changes. Serve as the SME in technical accounting, business operations, and accounting systems for areas of responsibility. Continuously look for opportunities to strengthen and/ or streamline existing accounting policies, procedures and processes. Recommend process improvements as appropriate.
Bachelor's degree required 7+ years of relevant work experience (in similar field and/or industry) Successful leadership experience Advanced knowledge of Microsoft Excel and Word and demonstrated talent for using technical tools in account analyses and research Strong working knowledge of US GAAP Month End Close and/or Financial Reporting experience Strong analytical skills
CPA preferred Knowledge of IFRS Public accounting experience SAP and Hyperion knowledge Financial Services experience
During your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include: A work environment built on teamwork, flexibility, and respect Professional growth and development programs to help advance your career, as well as tuition reimbursement Team Member Vehicle Purchase Discount Toyota Team Member Lease Vehicle Program (if applicable) Comprehensive health care and wellness plans for your entire family Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute Paid holidays and paid time off Referral services related to prenatal services, adoption, childcare, schools and more Tax Advantaged Accounts (Health Savings Account, Health Care FSA, Dependent Care FSA) Relocation assistance (if applicable)
Our success begins and ends with our people. We embrace all perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members' efforts to dream, do and grow without questioning that they belong.
Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.
Now Hiring: Manufacturing Project Manager
We’re looking for an experienced Manufacturing Project Manager to lead projects, process improvements, and cross-functional initiatives in a production environment.
What You’ll Do:
Lead manufacturing projects from concept to completion
Manage budgets, timelines, and resources
Coordinate with engineering, production, and vendor teams
Drive efficiency, safety, and continuous improvement
What We’re Looking For:
• 3+ years of project management experience in manufacturing
• Strong knowledge of production processes and lean principles
• Excellent leadership and communication skills
• PMP certification preferred
Hiring CDL-A Truck Drivers
- STEADY PAY THAT SHOWS UP - Earn up to $1,680 per week
- FREIGHT THAT FLOWS - 100% no-touch dry van
- HOME TIME THAT WORKS - Weekly or bi-weekly options
Why Drive for Mesilla Valley Transportation?
Mesilla Valley Transportation isn't just big - it's built right. As the largest privately owned fleet in the U.S., MVT combines scale with a driver-first mindset that actually shows up on your paycheck and your schedule.
From optimized lanes and ultra-low equipment downtime to fuel efficiency rewards and unique incentive programs, MVT focuses on what matters most: keeping you moving, paid, and respected. When MVT says drivers come first, it's more than talk - it's policy.
Regional CDL-A Truck Driver Job Overview
- Reliable weekly earnings you can count on. Earn $1,125-$1,680 per week*, with consistent regional freight and engineered lanes designed to keep miles steady and downtime low.
- Home time that fits your life. Choose weekly or bi-weekly home time options, giving you flexibility without sacrificing earning potential.
- Easy freight, smoother weeks. Run 100% no-touch dry van loads, spending more time driving and less time waiting or handling freight.
- Equipment that keeps you rolling. MVT's fleet runs with less than 1% downtime, backed by Penske roadside assistance and replacement trucks to keep you on schedule.
Benefits, Bonuses & Extras
- Strong benefits from day one. Full benefits package, weekly direct deposit, and access to pet & rider policies.
- Bonuses that actually stand out. Earn a $1,000 referral bonus, monthly fuel incentive bonuses, and qualify for MVT's quarterly new car giveaway.
- Rewards for running smart. Finish the year with the best MPG and compete for a $25,000 grand prize - because efficiency should pay.
- Tools that make life easier. Driver app for logs and paperwork, plus 24/7 Penske roadside support and replacement equipment when needed.
*Pay varies by route, location, experience level, and performance.
**There is no deadline to apply. Applications are accepted on an ongoing basis.
Driver Requirements
- Valid Class A CDL
- 6 months recent CDL-A experience
- Houston and Phoenix: 2 years recent CDL-A experience
- Must live within 100 miles of Dallas, TX
Job Type: Full-time
Work Location: On the road
Reference Number: 7
About us
Sol-Ark is a Veteran-owned solar and battery-based technology manufacturer based in Texas. Our mission is making the most reliable, innovative, and affordable solar storage solutions to power families & their businesses. Founded in 2013, the company has experienced massive, organic growth due to our equipment being 3x more powerful and capable than best-in-class alternatives. It is a fast-paced, yet casual work environment. We are a close-knit team looking to make significant contributions to a very fast-growing industry that values merit, character, aptitude, sustainability and self-reliance.
Job Description
Location: This position will be based in our corporate headquarters in Allen, Texas (Dallas-Fort Worth area)
Please use this link to apply directly to Careers Page: are seeking a detail-oriented and proactive Shift Manufacturing Supervisor – Afternoon Shift to join our team, to oversee our mechanical electronic assembly operations. The ideal candidate will be responsible for managing daily production activities, ensuring adherence to quality standards, and leading a team of assembly technicians to meet production goals efficiently.
Responsibilities:
- Supervision and Leadership: Manage and mentor a team of assembly associates, technicians, or any other assigned personnel, providing guidance, training, and performance evaluations to ensure a skilled and motivated workforce.
- Production Management: Oversee the assembly of mechanical and electronic components, ensuring production schedules are met and products comply with quality specifications.
- Workflow Optimization: Develop and implement efficient workflow processes, monitor production metrics, and identify areas for improvement to enhance productivity and reduce costs.
- Quality Assurance: Establish and enforce quality control standards according to the quality management system (QMS), conduct regular inspections, and collaborate with the quality assurance team to address any issues promptly.
- Safety Compliance: Ensure all assembly operations adhere to company safety policies and regulatory requirements, promoting a culture of safety awareness among staff.
- Resource Coordination: Manage inventory levels of assembly materials, coordinate with the procurement team for timely replenishment, and ensure optimal utilization of resources.
- Reporting: Prepare and present regular reports on production performance, quality metrics, and other relevant data to senior management.
Requirements
- Education: High school diploma or equivalent required; a Bachelor’s degree in Industrial Engineering, Manufacturing Technology, or a related field is preferred.
- Experience: Minimum of 3 years of supervisory experience in a manufacturing environment, specifically in mechanical and electronic assembly.
- Technical Proficiency: Strong understanding of assembly equipment, tools, and processes, with the ability to read and interpret technical drawings and schematics.
- Leadership Skills: Proven ability to lead and develop a team, with excellent communication and interpersonal skills.
- Problem-Solving: Demonstrated aptitude for identifying operational issues and implementing effective solutions promptly.
- Organizational Abilities: Strong organizational and time-management skills, with the capacity to manage multiple priorities in a fast-paced environment.
- Software Knowledge: Proficiency in Microsoft Office Suite; experience with manufacturing software systems (e.g., SAP, NetSuite, Oracle) is a plus.
Salary and Benefits: We offer a competitive salary and performance-based bonus program, top-tier benefits package, including medical, dental, and vision insurance, 401(k), and paid time off.
Architecture & Engineering Manager
5G is changing the world. Be part of that change. MD7, a digital infrastructure consultancy, is seeking a passionate Architecture & Engineering Manager to play a pivotal role in our continued expansion.
CONDITIONS
Location: Allen, Texas
Travel: 5%
Employment Type: Full-time, Permanent
Compensation: Starting at $100,000 + Dependent on Experience (DOE)
IN A NUTSHELL
The A&E Manager is responsible for preparing detailed architectural and engineering drawings and specifications for MD7 clients within the telecom industry. The A&E Manager will ensure all drawings follow company standards and state and local codes and ordinances. Additionally, the A&E Manager will attend site visits as necessary to obtain field measurements and photos to complete the drawings. The A&E Manager will ensure compliance and delivery on all telecommunication projects, in such a manner as to provide the highest quality of services to MD7 customers.
DAY-TO-DAY
- Leads and supports a team to achieve goals through clear direction, collaboration, and accountability. Oversees daily operations while fostering growth, performance, and a positive work environment.
- Accurately and effectively prepare architectural & engineering drawings, analysis, and specifications by agreed upon deadlines.
- Ensure drawings adhere to company standards, as well as state and local codes/ordinances.
- Drive visibility into task assignments and departmental progress via MD7's proprietary reporting platforms.
- Support Director of Architecture & Engineering as needed for projects and special assignments
- 50% Preparation of architectural & engineering drawings, analysis, and specifications utilizing AutoCAD, Adobe Photoshop, and other proprietary calculation sheets.
- 15% Modify drawings and analysis per redline mark-ups from A&E staff.
- 15% Ensure drawings are following company standards and state and local codes and ordinances.
- 10% Manage departmental workflows, including tracking, task assignment, and performance reporting
- 5% Attend field site walks to obtain site measurements and photos of field conditions.
- 5% Perform other duties and responsibilities as required by Director of A&E Operations.
DO YOU BRING?
- Certification in technical drafting (preferred not required)
- Active professional license with plan-stamping authority (preferred not required)
- Experience preparing architectural, electrical, and structural drawings for wireless carriers within the telecom industry, as well as EV infrastructure projects
- Experience creating construction drawings
- Good working knowledge of architectural and engineering practices, methods, and procedures.
- Experience with AutoCAD or other CAD software. Proficiency with AutoCAD tools, including Fields, Dynamic Blocks, and Design Center.
- Advanced knowledge and experience with AutoCAD or other CAD software.
- Advanced Excel skills for calculations and organization.
- Advanced skill level with computer software programs, such as Microsoft Office (including Outlook and Word).
- Ability to manage one's own time and to properly prioritize tasks to complete projects accurately and on time, consistently.
- Strong attention to detail and accuracy required.
- Able to sit, research and process documents on a computer for long periods at a time required.
We understand that you may not meet all the requirements. But if you bring the right level of commitment and enthusiasm, we believe we can achieve great things together. If you require reasonable accommodations to make your application process more comfortable, please email our recruiting team at , so we can support you accordingly.
BENEFITS
Time Off - We know the importance of work-life balance.
- 2 weeks of Vacation Time to start and grow throughout tenure
- 13 Paid Holidays
- 40+ hours of Sick Time
Rewards & Recognition - We value performance and celebrate success.
- Shoutouts on our newsletter
- Weekly Friday Huddle Recognitions
Health & Wellbeing- We take your wellbeing seriously.
- Comprehensive health, dental, vision insurance
- Voluntary coverages (Pet insurance, Long-Term Disability, Short-term Disability, Life Insurance and MORE!)
- On-site gym in office building
- Monthly company lunches and breakfast
- Private Wellness rooms
- Employee Assistance Program (EAP) – anonymous third-party support
Culture & Community- Work should be fun, meaningful, and connected.
- Monthly engagement activities
- Company-wide volunteer events for opportunities to give to your local community
Growth & Development- Your career is important to us.
- Internal career development opportunities
- Mentorship Program
Location
- Work from our prime Allen, TX office – right in the heart of the action
MD7 Core Values
Our Vision and Core Values are both foundational and aspirational at the same time. We never quit striving to improve. We're always looking to recruit exceptional talent that shares these values as well.
Respect for the Individual
Balanced Life
Giving Back
Continuous Improvement
Extreme Service
Integrity
We want to be able to continuously innovate to empower success. That's why, in addition to exciting career opportunities throughout the world, we also provide the best training in the industry.
Disclaimer
MD7 is an Equal Opportunity Employer. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.
If you need assistance or an accommodation due to a disability, please contact us at .
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.
In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.
This position is in McKinney Texas
What You Will Do
- Reading contracts for understanding of the deliverables
- Working in a PDM system to capture, manage, and track data deliverables and/or receivables
- Coordinating with cross-functional teams to obtain requested data
- Proofreading data for compliance to the requirement(s)
- Managing the data deliverable schedule and providing the data to the customer on-time
- Learning and understanding contractually required markings applied to data
- Running forecast reports and providing them to the appropriate stakeholders
- Providing metrics related to on-time deliveries and outstanding dispositions upon request
- Reviewing and approving sub-tier supplier statements of work for data requirements
- Supporting program meetings and providing training to program personnel and customers and/or suppliers
- Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information
Qualifications you must have
- Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
- Minimum of 2 years’ experience related to data management and/or equivalent professional experience
- Minimum of 2 years’ experience in a customer support/service role
Qualifications We Value
- Knowledge of U.S. government defense contracts
- Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
- Collaborate in a team environment
- Self-motivated and detail oriented
- Proven excellent oral and written communication and presentation skills
- Excellent proofreading skills
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Relocation Eligibility
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
