Engineering Journal Chula Jobs in Wasco, IL

Controls Engineer – Automation & Robotics (6 Openings)

Location: Elgin, IL (On-site)

Job Type: Direct Hire | Full-Time

Compensation: $95,000 – $150,000 (up to $160,000 for exceptional experience)

Benefits: Comprehensive benefits starting Day 1 (medical, dental, vision, 401k, stock programs, PTO, holidays)

About the Role

We are expanding our Automation Development team and are seeking Controls Engineers to support the design and build of highly advanced, custom automation and robotic equipment for autonomous vehicle production. This is a hands-on role focused on conceptual, in-house engineered systems—not repetitive builds or catalog automation.

Engineers in this group own projects end-to-end, from early concept and proof-of-principle through programming, debug, factory acceptance testing, and on-site integration. The current flagship project supports a next-generation autonomous vehicle platform, with the first production units already shipped.

This role is ideal for Controls Engineers coming from systems integrators or custom machine builders who enjoy variety, ownership, and technically challenging work.

Key Responsibilities

• Design, program, and debug PLC, HMI/SCADA, robotics, servo, and machine vision systems
• Develop control architectures for custom automation and robotic equipment
• Review electrical schematics and contribute to hardware and network architecture
• Perform system bring-up, debugging, validation, and factory acceptance testing
• Collaborate closely with mechanical engineers, assembly teams, and manufacturing
• Support equipment installation and integration at U.S. manufacturing facilities

Travel

• Typical travel averages 10–25% (historically fluctuates by project)
• Travel is limited to 4 U.S. manufacturing locations (California, Texas, Nevada)

Qualifications

• Experience in custom automation, robotics, or systems integration
• PLC programming experience ( Siemens preferred, Rockwell/Allen-Bradley also acceptable )
• Engineers proficient in Rockwell who are open to transitioning to Siemens are strongly encouraged to apply
• Experience with HMI/SCADA platforms (WinCC, Ignition, FactoryTalk, or similar)
• Bachelor’s degree in Electrical Engineering, Controls, Mechatronics, Automation, or related field (or equivalent experience)

Why This Opportunity Stands Out

• Work on fully conceptual, in-house designs with protected intellectual property
• Exposure to cutting-edge autonomous vehicle and robotics technology
• Projects that most automation houses and integrators never get access to
• Strong compensation, Day-1 benefits, and long-term growth potential
• Collaborative engineering culture with high technical standards and visibility

Treasury Analyst

Geneva, IL or Pella, Iowa

The Treasury Analyst will support all aspects of the Treasury Department activities for Pella Corporation. This includes performing daily cash planning and transactions, coordinating borrowing and investing activities, preparing cash forecasts, administrating on-line bank access and controls, maintaining up-to-date bank account records, and ensuring compliance with treasury policies. To accomplish these duties the Treasury Analyst will work very closely with the Treasurer and the financial management at all Divisions and Subsidiaries of Pella Corporation as well as external banking entities.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Direct daily cash management to identify, track, and plan for the various cash flows for all divisions and subsidiaries of Pella Corporation. The goal is to minimize idle dollars sitting in bank accounts and to maximize Pella’s investment position or minimize borrowing balances.

Coordinate monthly Investment & Cash Forecast meeting that reviews and reconciles the previous month’s cash forecast versus actual, Pella’s investment portfolio, investment yields, cash balance year-over-year comparison and the cash forecast for the next month.

Publish weekly Investment & Borrowing report that summarizes investments and credit facility borrowings.

Establish and maintain efficient banking structure that supports corporate cash management goals.

Develop and maintain effective banking relationships.

Serve as System Administrator for on-line banking services and manage access privileges to enable users while maintaining the appropriate system controls. This includes completing formal quarterly reviews that confirm access versus proposed guidelines.

Maintain complete list of all bank accounts with current authorized signers.

Work directly with banks and divisions or subsidiaries to add or delete bank accounts as needed for new acquisitions or banking changes.

Review bank analysis fees for all accounts to ensure accurate billing and identify opportunities to reduce costs while balancing efficiency of bank reporting needs.

Participate in the development and communication of Treasury policies and procedures. Responsible for ensuring compliance and updating policies as needed to reflect improved practices or processes.

Work closely with the benefits team on flexible spending account processes and account reconciliations. Review journal entries prior to submission to ensure reporting from FSA plan administrator accurately reflects the activity in the FSA bank account. This also includes tracking each year separately so that forfeited funds for each respective plan year can be transferred as directed.

Prepare quarterly bank compliance reporting in timely manner and support debt capacity planning as needed.

Support month-end and year-end closes, audits, and internal control reviews as required.

Prepare the Annual and Quarterly U.S. Government Census Reporting requirements. Work with all divisions to provide accurate information for significant Census requirements. Assist with any other census requests throughout the year by acting as the liaison between Pella Corporation and the respective Census Bureau.

Oversee petty cash reimbursements and activity at all sites to ensure compliance with policy.

Complete month-end journal entries as needed for bank fees and misc cash transactions as well as monitoring various accrual accounts. Responsible for ensuring general ledger accounts tie to bank statements and investment reports through monthly account reconciliations.

Complete budget for upcoming year on various Treasury-related accounts. Review and update as needed in the quarterly Forecast process.

Support corporate insurance, bonding, and PDSN reporting activities as needed.

In addition, based on current demands of the business, the Treasury Analyst will participate in other projects and support other functions as needed.

EDUCATION and/or EXPERIENCE

Bachelor's degree in Accounting, or related field from a four-year college or university. Two plus years work related experience in general accounting, treasury, or banking preferred. Candidate with the equivalent combination of education and experience may be considered.

PERSONAL CHARACTERISTICS and ABILITIES

Excellent interpersonal skills with the ability to maintain confidentiality, work independently, multi-task and manage competing deadlines, and apply good judgment. Individual must also have strong organizational, critical thinking and customer service skills.

LANGUAGE SKILLS

Excellent communication skills required, both written and verbally. Possess ability to effectively present information and respond to questions from internal customers, management, vendors, and banking partners.

MATHEMATICAL SKILLS

Strong mathematical and analytical skills with the ability to design and analyze financial reports.

COMPUTER SKILLS

Strong computer skills, including proficiency in using internet banking programs and Microsoft Excel, Word, and PowerPoint.

Companies Overview: Peacock Colors Company (PCC) was founded in 1925 in Chicago, IL as a paint and ink company. For the last 50 years Peacock has manufactured colorants and additives for the plastic processing industry. Vortex Liquid Color Company (VLCC) was founded in 1996 in Sheboygan, WI and provides liquid color concentrates for many engineering and commodity polymers. We create color chemistry for a sustainable future. We combine economic success with environmental protection and social responsibility. Poly Compounding specializes in toll compounding of heat and shear sensitive engineered plastics with technical know-how and decades of experience in developing customized compounding processes specific to the need of the application. All enterprise companies contribute to the success of our customers by providing them brilliant colors, long stable color life, specialty compounds and draw the attention of consumers. We are leaders in our field and work relentlessly to satisfy our customer needs.

Key Accounts Manager (KAM) Plastics Colors and Additives:

Summary:

Key Accounts Manager (KAM) Plastics Colors and Additives: is responsible for the growth of Peacock Color and Vortex Liquid Color product sales in the Americas. Focus on retaining and growing current customers, pipeline of new customer development and closure, forecasting, support customer orders, line scheduling and maintaining all customers within payment terms. Scout new potential customers in previously unknown industrial markets and/or new applications. Create, maintain, and close opportunity in the pipeline to drive above-market growth. Key successes factors include negotiating, project management, networking and ability to build and maintain strong customer relationships. Ability to communicate effectively with all employees as well all customers. Upholds and supports organizational goals and values. Ability to handle multiple activities and must be outgoing, self-driven, pleasant & very personable.

Key Responsibilities:

Key Account Development & Sales Management:

• Own the relationship and projects at core customers and find new opportunities for growth within the accounts. Improve PCC share via gaining competition share.
• Find new/new accounts and drive new business growth by gaining technical specification at customer in the Americas. Understand Customer CTQ’s and relate it back to technical team to develop product for commercial success.
• Balance short term and long-term business objective effectively: drive new business growth and building a strong target position for the future.
• Develop strong technical understanding of Color and liquid color products in traditional and new application area.
• Identify and assess the current customer base and prospects for selling additional PCC. This includes selling price, volume, and customer buying criteria, market/business dynamics and entry strategies.
• Relationships & customer satisfaction.
• Short-term & long-term forecasts.
• Manage complaints.
• Manage credit terms/account receivables.
• Proactively leverage relationships to obtain the Voice of Customers, understand & articulate value propositions, and monitor the competitive landscape.

Project Management:

• Utilize skills to map new business projects and application development (see below)
• Manage projects and developments through the development process and drive completion of milestones per established timelines.
• Strong problem-solving skills

Application Development:

• Utilize specific technical expertise to translate innovations and differentiated products to commercial success.
• Interact with Color development lab and manufacturing organizations to facilitate success by communicating unmet needs in new applications.
• Internal and external influencing skills
• Communicate product quality needs to Manufacturing and technical personnel.

Teamwork is critical due to the diversity of talents involved. Focus of the team on key deliverables and the value of the market dynamic are very important. Development of the capabilities of each direct report is important to the succession options for the company.

Core Competencies (A must have):

• Communication skills: Effectively respond to customer needs, demonstrate listening, questioning, clarifying and summarizing skills.
• Commercial/Negotiating Skills: Build consensus and agreement at customer organization and secure commitments.
• Business Decision Making: Financial acumen, cost and benefits, lean for past experience, problem solving and develop solutions.
• Strategic Thinking: Develop and execute business strategy, understand competitors-strength and weakness, understand and address the needs of multiple customers.
• Results Oriented: Proven commercial track record with sustained business results and topline growth, accountability for target follow up and closure. Ability to break complex problems into manageable task and direct necessary resources to meet and beat deadline.
• Passion for Excellence: Integrity and resilience a must. High level of collaboration, willing to accept constructive criticism/feedback, lead with example, exhibit and expect hard work, deep passion and breed success.

QUALIFYING & REQUIREMENTS:

• BS degree in business, science or engineering or equivalent experience.
• Minimum 3-5 years of experience in sales and marketing in differentiated markets.
• Ability to interact with R&D and manufacturing to facilitate developments, complaint investigations etc.
• Business development, application development, project management, and pull-through marketing experience with proven track record.
• Background in the plastics industry, but not required.
• Proven ability to influence internal and external decision makers.
• Results oriented.
• Strong communication and sales skill.
• Strong team player.
• Comfortable and efficient with working independently.

Aegis is partnered with a growing precision sheet metal fabrication manufacturer in the Chicagoland area that supports OEM customers from prototype through full production. This company operates in a fast-paced job shop environment and prides itself on quality, accountability, and collaboration between engineering and production.

They are seeking a Quality Manager to lead plant-level quality systems and oversee a team of quality technicians.

Daily Responsibilities:

• Own and maintain ISO 9001:2015 Quality Management System
• Lead internal, external, and customer audits
• Drive corrective actions (8D, 5 Why, CAPA)
• Manage customer quality communication and complaint resolution
• Oversee inspection processes including blueprint and GD&T interpretation
• Develop and track KPIs related to scrap, rework, and performance
• Mentor and lead a team of 5 quality inspectors
• Partner with production and engineering to resolve manufacturing issues

Requirements:

• 5+ years quality experience within precision sheet metal fabrication
• Strong ISO 9001:2015 experience
• Audit leadership experience
• Root cause analysis expertise
• Leadership experience managing direct reports
• Hands-on manufacturing presence

As a world leader in sensing and control technology, Nidec Mobility controls the most discrete functions within an automobile – from seat switches, power window switches, and instrument panel controls, towards complex user interfaces. NMOA is directly involved with automotive OEM’s and holds a leadership position within Nidec for product development with global vehicle makers.

The Test Systems Technician is responsible for hands on assembly, wiring, integration, and validation of automated test equipment and custom test systems. This role requires strong practical electrical and mechanical skills, the ability to read and interpret electrical schematics, and experience building complex tester platforms from concept through deployment.

Key Responsibilities

• Assemble automated test systems, electrical panels, and custom tester platforms from engineering drawings and schematics

• Perform point to point wiring of control panels, power distribution systems, instrumentation, and data acquisition hardware

• Route and terminate cables including power, signal, communication, and high voltage wiring

• Read, interpret, and troubleshoot using electrical schematics, wiring diagrams, and layout drawings

• Integrate hardware components such as power supplies, PLCs, relays, breakers, DAQ systems, and network equipment

• Perform continuity checks, insulation resistance testing, and basic electrical verification

• Support system bring up, debugging, and validation alongside engineering teams

• Identify wiring errors, component mismatches, and layout improvements during assembly

• Maintain accurate build documentation and redline drawings as required

• Follow all electrical safety standards and company procedures

Please directly apply or email resume to

NO SOLICITING FROM RECRUITERS

• 
  
• Analyze rejected electronic assemblies using test equipment, simulators, and troubleshooting methods
  
• Perform board-level diagnostics and determine root causes of product failures
  
• Troubleshoot complex electronic issues and recommend corrective actions
  
• Identify vendor defects vs. process-related defects
  
• Document findings and create detailed failure analysis reports
  
• Record failure data and clearly explain diagnostic conclusions
  
• Work independently and adapt to changing operational conditions
  
• Provide support for factory operations, including occasional weekend work
  

• 
  
• Associate's Degree in Electronics Engineering Technology required
  
• Bachelor's Degree preferred
  
• 1-3 years of experience in electronics troubleshooting or analysis
  
• Strong electronic and mechanical troubleshooting skills
  

• 
  
• Signal Generators
  
• Spectrum Analyzers
  
• Oscilloscopes
  
• Power Meters
  
• Modulation / Audio Analyzers
  

• 
  
• RF knowledge
  
• Ability to read and interpret electronic schematics (preferred)
  
• Experience with 2-way subscriber products (preferred)
  

• 
  
• 100% onsite presence required
  
• Steel-toe boots mandatory
  
• Ability to work in a fast-paced production environment
  

• 
  
• Orientation begins at 6:30 AM
  
• Temporary badge will be provided
  
• Immediate start with contract running through end of the year
  
• 30-minute interview (Google Meet or onsite - candidate preference required)
  

• 
  
• Potential contract extension beyond the end of the year
  
• Exposure to advanced electronics troubleshooting tools and techniques
  
• Opportunity to work in a dynamic manufacturing environment focused on continuous improvement
  

MSI Express is a single-source contract manufacturing and packaging company, delivering innovative engineering solutions from our strategically located network of manufacturing facilities.

ROLE PURPOSE/ POSITION SUMMARY:

Manages activities of all production personnel across an entire shift within a manufacturing facility. Monitors activities to maximize productivity, minimize cost, and maintain quality in all facets of the facility operations. Ensures associates comply with company policies, procedures, and guidelines to maintain safe, efficient operations within a positive working environment. Performs shift administrative tasks, including metric reporting and personnel actions.

KEY ACCOUNTABILITIES/PRIMARY DUTIES & RESPONSIBILITIES:

• Manage SQF, Food Safety, Food Quality, Sanitation, 6S and customer standards
• Provides daily direction to Supervisors and hourly associates to meet designated productivity metrics, including labor costs/utilization, operational efficiency, scrap loss rates, and other measures to optimize profitability and meet demand. Develops and implements action plans to address production performance concerns or improve operations
• Coordinates production/facility activities with Shift Managers as appropriate
• Ensures administrative activities for the shift are being completed timely and accurately. These include but are not limited to payroll, performance reviews, standard and ad hoc production reporting, disciplinary actions, etc.
• Ensures announcements, safety topics, policies, procedures, and expectations are communicated to the staff and executed where appropriate
• Create and/or assists in the development and execution of plant budgets, goals, standards, EOS action items and career development plans
• Understand job standards and/or machine operation for each function
• Follow up on associate orientation, on-boarding, training, new hire performance reviews, and/or development as appropriate
• Ensures associates have appropriate tools to perform assigned duties and that tools/equipment are routinely inspected and maintained
• Performs other duties as assigned

PEOPLE MANAGEMENT RESPONSIBILITIES:

• Recruitment and Selection: determine labor needs; understand and use the Company’s interviewing process and tools; participate in the on boarding process (Passport orientation, etc.)
• Managing & Rewarding Performance: set clear performance expectations (Passport, Performance Management Process); provide regular feedback; resolve team conflicts; encourage a positive and safe environment; use coaching and corrective action for underperformance; understand and use voluntary/involuntary termination processes
• Training & Development: understand and coach others on processes, tools and standards (SOP’s); ensure training requirements are met; identify and address skill gaps; discuss career interests and developmental plans/next steps. Create appropriate action plans for individual development
• Communication & Engagement: communicate site, company, and other pertinent information to team (pre-shift, one on one, etc.); share customer and MSI Express Inc information on regular basis

QUALIFICATIONS/ CAPABILITY PROFILE:

Minimum Education

High school diploma and/or GED- Essential

Bachelor’s degree in related field- Desirable

Minimum Experience

Three to five (3-5) years of experience in a manufacturing environment, with particular preference for food manufacturing and/or packaging experience- Essential

Some experience interacting with the company customers- Desirable

One to three (1-3) years of experience in a lead or supervisory role- Essential

Minimum Knowledge/ Skills/ Abilities

Strong leadership skills- Essential

Decision making skills- Essential

Ability to analyze and/or solve problems- Essential

Strong verbal, written, and interpersonal communication skills- Essential

Ability to plan work schedules- Essential

Working knowledge of food manufacturing processes, good manufacturing practices (GMPs) and related concepts- Essential

MSI Express is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Apply today and join our rapidly growing team!

- Inc. 5000 #124 fastest growing company in the Midwest. (2025)

- Inc. 5000 #10 fastest growing company in the Midwest. (2022)

- Inc. 5000 #165 fastest growing company in the Midwest. (2021)

- Inc. 5000 #1,085 fastest growing company in the USA. (2023)

- Inc. 5000 #622 fastest growing company in the USA. (2022)

- Inc. 5000 #479 fastest growing company in the USA. (2021)

Job Title: Account Executive
Location: On Site - Batavia, Illinois, United States
Salary: $70,000 - $80,000 ($100k - $120k OTE)
Skills: Sales, Client Relationship Management, Event Production, CRM (HubSpot), Proposal Development, Event Logistics

About the Company / The Opportunity:

Are you an expert relationship builder with a passion for event production and sales? Our client, a dynamic company in the event solutions sector, is seeking a detail-oriented Account Executive to transform prospects into long-term partners. In this on-site role based in Batavia, Illinois, you’ll engage directly with clients, oversee event logistics, and play a pivotal role in delivering memorable experiences. This is an excellent opportunity for someone who thrives on collaboration, problem-solving, and driving client satisfaction within a fast-paced environment.

Responsibilities:

• Guide clients through the discovery and proposal process, engineering solutions aligned with their objectives.
• Build and sustain strong relationships with clients, including planners, venues, and production partners.
• Develop expertise in products and solutions to serve as a trusted resource for clients.
• Track client performance and sales pipeline through CRM systems, providing regular updates and forecasts.
• Address and resolve client concerns or escalations promptly to foster lasting partnerships.
• Create customized proposals and installation plans tailored to site and event requirements.
• Conduct job walk-throughs and site visits to ensure logistics and design align with client vision.
• Collaborate with Sales Operations for seamless event preparation and execution.
• Provide post-event debriefs, collect feedback, and document learnings for continuous improvement.

Must-Have Skills:

• 5+ years of experience in sales and/or event production (rental experience is a plus).
• Demonstrated ability to manage complex client relationships and project timelines.
• Strong math skills for proposal development and scope accuracy.
• Proficiency with CRM systems (preferably HubSpot), email, QuickBooks, and Microsoft Suite.
• Excellent verbal and written communication abilities across in-person, phone, and email platforms.
• Ability to travel locally for client meetings and site visits as needed.

Nice-to-Have Skills:

• Experience with event logistics, permitting, or construction-related workflows.
• Previous involvement in the tent rental industry or large-scale event production.
• Comfort working under pressure and quickly adapting to changing event needs.
• Strong documentation and reporting abilities for process improvement.
• Collaborative approach with internal teams to ensure client satisfaction.

Position: Mastercam CNC Programmer / Machinist

Hourly Pay: $32–$35/hr

Location: Batavia, IL

Job Description

Essential Duties and Responsibilities

• Set up, program, and operate CNC turning machines, including Haas Turn Mill and Mazak lathes.
• Program lathes using drawings and job travelers to produce designated parts.
• Operate the Star Clip machine and perform secondary operations such as deburring, grinding, drilling, and tapping.
• Inspect parts for quality, take measurements, detect production flaws, and adjust or reprogram controls.
• Communicate effectively with Machinist Level III and Engineering regarding concerns or job changes.
• Recommend or approve supplies and materials necessary for lathe jobs.
• Serve as backup to the Machinist Level I to maintain workflow through the department.
• Assist with general facility operations, including equipment loading/unloading and inventory management.
• Maintain a safe work environment by following established safety procedures and regulations.
• Stay current with job knowledge through training and educational opportunities, including conversational programming and TMA classes.
• Keep work areas organized and clean, including sweeping and general upkeep.

Education and Work Experience

• High school diploma or equivalent.
• Minimum 1 year of experience in a shop environment.
• Minimum 1 year of experience operating CNC turning equipment.

Physical and Skill Requirements

• Ability to work in a non-climate-controlled shop environment.
• Proficiency with basic shop tools, such as drills, hammers, screwdrivers, sanders, and saws.
• Ability to perform high school-level math, including decimals and metric measurements.
• Ability to read and interpret drawings/blueprints and use simple gaging tools, such as tape rules, dial calipers, and pin gauges.
• Fluent in reading and writing English.
• Ability to lift and move up to 40 pounds.

To be considered for this opportunity, please reach out to Trova Advisory Group by sending an email to with your resume, the position you are applying for, and a brief introduction.

When contacting us, please ask for the hiring team to ensure your application is directed to the right person. We look forward to hearing from you!

About Trova Advisory Group

Trova Advisory Group specializes in delivering a comprehensive array of staffing solutions tailored to meet the diverse needs of businesses across various sectors. Our expertise spans clerical, administrative, financial, and professional roles, offered through flexible arrangements including temporary placements, temp-to-hire options, and direct hire services. With a keen understanding of the dynamic demands of today's workforce landscape, we pride ourselves on providing top-tier talent solutions that empower organizations to thrive and succeed in a competitive market environment.

Trova Advisory Group is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.

We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at Include the nature of your request and your contact information, and we will be happy to assist you.

Trova Advisory Group offers a comprehensive benefits package offering Medical, and Dental benefit options to all eligible employees.

Purchasing Analyst

The Purchasing Analyst manages end-to-end procurement for products, components, and supplies, supporting cost savings, supplier performance, and supply chain efficiency. This role oversees purchasing activities including issuing purchase orders, negotiating pricing and contracts, and maintaining strong vendor relationships.

Key Responsibilities

• Manage supplier relationships, contracts, pricing, and purchase orders
• Analyze spend data and market trends to identify savings and risks
• Conduct supplier evaluations and support negotiations
• Monitor inventory levels, delivery performance, and procurement KPIs
• Maintain supplier records, reports, and compliance
• Support continuous improvement and process optimization initiatives

Qualifications

• Bachelor’s degree in Supply Chain, Business, Finance, or related field
• 3+ years of purchasing or supply chain experience
• Strong negotiation, analytical, and communication skills
• Advanced Excel skills; ERP or procurement system experience preferred
• Ability to collaborate cross-functionally and manage multiple priorities
• Relevant certifications (CPSM, CSCP, CPP, APICS) a plus

Salary Range: $70,000-$80,000

Benefits:

• Bonus Offered
• Health, dental, and vision, life, short/long term disability insurance
• 401(k) offering
• Paid time off and holidays (80 hours PTO)
• Paid sick leave where applicable by state law.

LHH is a leader in permanent recruitment—and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn’t a perfect match.

Equal Opportunity Employer/Veterans/Disabled

• To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit