Engineering Geology Jobs in Roseville, CA

Harris & Bruno International (H&B), a printing equipment and spare parts manufacturer, is seeking full-time CNC Machinist III ($30-$35 p/h) & CNC IV/Programmers ($36-$45 p/h). See below for both job descriptions.

CNC Machinist III ($30-$35 P/h)

This is a highly skilled, senior-level machinist responsible for setting up and operating CNC equipment to manufacture precision components. This role serves as a technical expert on the shop floor, leading complex machining projects, troubleshooting issues, and mentoring junior machinists to ensure quality, efficiency, and continuous improvement.

Expectations

• Set up and operate CNC mills for complex, tight-tolerance parts
• Edit and optimize CNC programs (G-code or CAM-generated)
• Interpret advanced engineering drawings, GD&T, and specifications
• Select appropriate tooling, fixtures, and machining strategies
• Perform first article inspections and in-process quality checks using precision measuring tools
• Troubleshoot machining issues, including tooling, programming, and material challenges
• Optimize cycle times and improve manufacturing processes
• Lead or support continuous improvement initiatives (lean, 5S, etc.)
• Train, mentor, and provide guidance to CNC Machinist I & II team members
• Collaborate with engineering and quality teams to resolve design or production issues
• Maintain equipment and ensure proper machine upkeep
• Follow all safety and quality procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training or apprenticeship preferred)
• 5–10+ years of CNC machining experience in a manufacturing environment
• Advanced experience with CNC mills (multi-axis preferred)
• Basic programming skills (G-code and/or CAM)
• Deep understanding of GD&T and blueprint reading
• Proficiency with precision measurement tools (micrometers, calipers, height gauges, CMM exposure a plus)
• Experience machining a variety of materials (aluminum, steel, stainless, etc.)
• Strong troubleshooting and problem-solving skills
• Ability to work independently with minimal supervision

Preferred Qualifications:

• Experience with 4-axis and 5-axis machining
• Lean manufacturing or continuous improvement experience
• Leadership or team lead experience
• Familiarity with ERP/MRP systems

CNC lV/Programmer ($36-$45 p/h)

This is a senior-level technical expert responsible for full-cycle CNC programming, setup, and operation of complex precision components. This role leads advanced machining strategies, develops efficient programs using CAM software, and drives continuous improvement across machining processes. This position supports engineering and manufacturing by assisting with troubleshooting, process development, and manufacturability improvements, while mentoring machinists and supporting production excellence.

Expectations

• Develop, write, and optimize CNC programs using CAM software (e.g., Mastercam, Fusion 360)
• Set up and operate CNC mills and/or lathes for highly complex, tight-tolerance parts
• Interpret advanced engineering drawings, CAD models, and GD&T requirements
• Design and recommend tooling, fixtures, and workholding solutions
• Lead new part introduction (NPI) from print to production
• Perform program prove-outs, first article runs, and process validation
• Troubleshoot and resolve complex machining, tooling, and programming issues
• Optimize cycle times, tool life, and overall machining efficiency
• Collaborate closely with engineering to improve part manufacturability (DFM feedback)
• Mentor and train CNC Machinist I–III team members
• Establish and document standardized work instructions and setup sheets
• Support continuous improvement initiatives (Lean, 5S, Kaizen)
• Ensure compliance with quality standards and safety procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training strongly preferred)
• 8–12+ years of CNC machining experience, including advanced programming
• Expert-level proficiency with CNC mills (multi-axis required)
• Advanced CAM programming experience (Mastercam, Fusion 360, or similar)
• Strong G-code knowledge and ability to edit programs at the machine
• Deep understanding of GD&T and blueprint interpretation
• Experience with complex materials (stainless steel, tool steels, aluminum, etc.)
• Proficiency with precision inspection tools; CMM experience preferred
• Proven ability to troubleshoot and optimize machining processes
• Ability to work independently and lead technical projects

Preferred Qualifications:

• 4-axis and 5-axis machining expertise
• Fixture design experience
• Lean manufacturing or Six Sigma exposure
• Experience with ERP/MRP systems

Both Positions:

Physical Requirements:

• Standing/Walking: Must be able to stand and walk for extended periods.
• Lifting/Carrying: Must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds.
• Manual Dexterity: Requires the use of hands and fingers to handle, feel, reach, and operate tools, measuring instruments, and computer controls.
• Vision Requirements: Must have close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus to inspect parts and read precision measuring instruments.
• Hearing and Communication: Must be able to hear machine sounds, alarms, and verbal instructions in a noisy environment.
• Postural Requirements: Must be able to bend, stoop, kneel, crouch, and occasionally climb or balance while loading materials or accessing machinery.
• Work Environment: Exposure to moving mechanical parts, metal shavings, noise, coolant, and shop odors. Personal protective equipment (PPE) such as safety glasses, hearing protection, and safety shoes are required.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Position Summary:

Harris & Bruno is seeking a highly organized and technically capable Capital Equipment Project Manager to support the delivery, installation, and demonstration of our coating and embellishment equipment for the printing industry. This role serves as the primary technical and project coordination contact for customers during machine builds, installations, and startups, while also acting as an internal resource across sales, service, engineering, production, and marketing teams. The position ensures projects remain on schedule, customers are prepared for successful installations, and demonstrations and production of samples are executed to a high standard.

Key Responsibilities:

Project Management & Coordination

• Manage projects associated with Harris & Bruno equipment, including auxiliary coating systems and full machinery platforms (ZR, ZRW, ZRX).
• Coordinate cross-functional efforts between engineering, production, service, sales, and marketing to ensure projects stay on schedule and aligned with customer requirements.
• Track project milestones, identify risks, and proactively communicate status updates internally and externally.

Customer Technical Liaison

• Serve as the primary technical point of contact for customers during pre-installation, installation, and startup phases.
• Communicate facility requirements, utility needs, and site readiness expectations to customers.
• Support customers in understanding startup materials, consumables, and operational prerequisites.

Installation & Startup Support

• Assist in planning and execution of machine installations and commissioning activities.
• Work closely with service teams to ensure smooth handoff from build to installation and support resolution of technical issues.

Internal Support & Collaboration

• Act as a technical resource for sales during pre-sales discussions and project handoff.
• Support engineering and production by clarifying customer requirements and guiding build priorities.
• Provide input to marketing on machine capabilities, applications, and customer use cases.

Demonstration Room & Applications Support

• Support operation and scheduling of the Harris & Bruno demonstration room.
• Assist with customer demos, trials, and sample production.
• Produce samples for customer evaluation, sales efforts, and marketing initiatives.
• Help maintain demo equipment readiness and documentation.

Qualifications

• Experience in project management within manufacturing, capital equipment, or industrial machinery environments.
• Strong technical aptitude with mechanical systems; printing, coating, or converting industry experience is highly preferred.
• Ability to communicate technical concepts clearly to customers and internal stakeholders.
• Strong organizational skills with the ability to manage multiple projects simultaneously.
• Comfortable working cross-functionally in a fast-paced manufacturing environment.

Preferred Skills & Attributes

• Familiarity with printing presses, coating systems, or inline converting equipment.
• Experience supporting machine installations or customer-facing technical roles.
• Strong problem-solving skills, adaptability, and attention to detail.
• Ability to balance customer-facing responsibilities with internal project coordination.

Reporting & Impact

This role works closely with sales, engineering, service, production, and marketing teams and plays a critical role in customer satisfaction, on-time delivery, and successful adoption of Harris & Bruno equipment.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Pilot—CBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY!

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region: Homestead, FL and CAMB: Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR

• Apply on USAJOBS ; OR

• Apply on Airline Apps.

Stay Updated – Opt into CBP's talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Job Responsibilities:

• Assists team with project research and project coordination with governing municipalities / agencies
• Prepare complete civil design – from schematic plan sets to construction documents for permitting of development projects using AutoCAD and Civil 3D, transforming conceptual designs into detailed plans, in accordance with jurisdictional requirements.
• Collaborate with Project Manager I/II, and/or Project Engineer to prepare reports and supporting documents including hydrology reports, feasibility studies, engineers cost estimates, etc.
• Attend meetings, site visits and field inspections independently to coordinate various design aspects of projects with project consultants and/or contractor
• Review co-consultant reports, plans and /or recommendations and effectively implement into project design and documentation
• Participate in project coordination / correspondence with consultants (project architect, geotechnical engineer, structural engineer, arborist, surveyor and/or contractor)
• Ensure deliverables meet project specifications, regulatory standards, and client expectations

Job Requirements, Qualifications, Characteristics:

• B.S. in Civil Engineering
• 3–5 years of experience in civil engineering design
• Proficiency with AutoCAD Civil 3D
• Excellent written and verbal communication skills
• E.I.T. certification
• Experience in general civil engineering design topics including utility design, hydraulic/hydrology, storm water quality, geometric layout, geotechnical and structural concepts
• Access to automotive transportation
• Advanced knowledge of current building design codes and applications
• Analytical/Strategic thinking abilities
• High attention to detail
• Occasionally walk job sites and carry or use survey equipment

FULL TIME CONSTRUCTION MARKETING AND PROPOSAL MANAGER

Location: Sacramento Area

In a competitive construction environment, Landmark is dedicated to customer satisfaction through collaborative project delivery. As a marketing manager, you are a valuable part of our success in this effort. Our team is committed to:

PROFESSIONALISM: We are committed to the continuous development of our professional approach to all of our business activities.

CHARACTER & BEHAVIOR: We conduct ourselves to the highest standards with a focus on integrity, forthrightness, and fairness.

CONTINUOUS IMPROVEMENT: We conduct our business to the highest standards with a focus on quality and continuous improvement.

Landmark is a different company; we work hard and play hard. We find the skillsets we cultivate to play hard are the very same that we use to complete our projects to the highest standards.

RESPONSIBILITIES:

• Represent the firm to clients, peer organizations, and business associates
• Establish programs to accomplish marketing-related aspects of our mission
• Manage and oversee conference, trade show, and event messaging and materials where we are exhibitors, and attend as requested by management.
• Manage prequalification activities
• Manage proposal activities including development of winning strategies for each proposal
• Production of high quality RFQ/P responses
• Lead pursuit and approach meetings, alongside Director
• Direct, communicate, and manage timely collection of deliverables, content, and components from internal and external parties
• Conduct research to understand client and project needs, preferences and requirements
• Author, collaborate, and edit proposal content to align with company values and standards
• Create visually appealing proposals and content, providing information in an attractive and clear manner
• Manage presentation activities including development of slide deck, story boards, and other supporting materials
• Coordinate with staff, proposed team members, design partners, subconsultants, and clients to ensure complete, strategic, and winning proposal responses
• Conduct post-project reviews to evaluate performance, identify lessons learned, and implement improvements for future projects.
• Lead, coordinate and manage collateral materials development, public relations and advertising programs, corporate identity development and implementation, special events, and market research activities
• Actively involved in professional and community organizations
• Manage and coordinate internal and external events
• Assist with marketing budget development
• Assist with marketing plan development
• Manage client-contact program
• Develop and maintain the firm’s digital presence
• Maintain an organized and complete marketing library
• Work collaboratively with team members
• Manage resources to produce excellent, high-quality results

QUALIFICATIONS:

• Bachelor’s degree in Marketing, Communication, Journalism, English, Architecture, Construction Management, Engineering, or related field is preferred.
• Ideal candidate has 8+ years of marketing experience in the AEC industry.
• Experience with Adobe Creative Cloud, particularly InDesign, is required.
• Experience with Salesforce CRM software a plus, but not a requirement
• Proficient in MS Office.
• Strong writing and editing skills, and exceptional graphic layout design skills
• Strong organizational skills
• Ability to prioritize multiple tasks amid changing needs and demands, maintaining a constant attention to detail
• Flexibility to periodically work outside normal business hours, and travel as required for business needs
• A positive attitude

BENEFITS: We offer competitive wages depending on experience with opportunities for professional growth. Landmark offers a generous benefits package that includes:

• Employer-paid premium medical, dental, and vision
• Employer match 401(k) retirement program
• Seven paid holidays
• Paid time off (PTO)
• Discounted gym memberships
• Industry and Charity event sponsorships
• Company adventure outings such as skiing and white-water rafting
• Employee referral program

We are an Equal Opportunity Employer. We maintain a drug-free workplace. Candidates will be required to pass a pre-employment background investigation and drug test as a condition of employment. Must meet the I-9 eligibility requirements for employment.

If interested, please send your resume to

Job Responsibilities:

• Evaluating proposals/bid documents to determine scope of work and required contents of estimate.
• Evaluating contractual requirements, attending pre-bid meetings, and determining scope of work and potential conflicts.
• Preparing take-offs and budgets for labor/material/equipment pricing, performing labor production analysis, and determining general conditions and indirect job cost expenses.
• Assisting and leading the bid effort on behalf of the Owner, providing systems cost analysis, assisting with constructability reviews, and providing input to the project schedule analysis.
• Planning, preparing, executing, and presenting all cost models and milestone estimates throughout the various phases of design.
• Supporting the Estimating Team in the procurement of work and budgeting of projects
• Providing the design team with accurate cost information for Design-Build projects, ensuring that the project is on budget and on schedule.
• Coordinating the entire competitive bid process on projects as assigned.
• Working with the Project Managers in the procurement and buyout phases.
• Maintaining relationships with the local subcontractor community and negotiating with subcontractors/vendors on contracts and purchase agreements.

Job Requirements, Qualifications, Characteristics:

• Bachelor’s degree in engineering, construction management, mathematics, finance or accounting, or related degree field.
• Strong analytical skills and ability to learn quickly and adapt to pressure situations.
• Understanding of basic math skills with general understanding of construction practices.
• Understanding of estimating software, including Microsoft Products, On-Screen Take-Off software, Blue Beam, Bid Software, and knowledge of BIM, Primavera, Assemble, and Autodesk (this can be learned on the job).
• Work well in team environment as well as demonstrating strong work ethics.
• Other preferred skills include creative problem solving, strong organizational and interpersonal skills, as well as a positive, “can-do” attitude.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

We have an immediate opportunity for a Proposal Writer/Editor Coordinator in the Placer County Area. This position requires a fun creative writer that will support the marketing department with RFPs. This is an in-office position, Monday - Friday.

Job Responsibilities:

• Ability to lead the development of marketing content for bid proposals, RFPs, and presentations.
• Prepares marketing content for proposals by determining concept, gathering and formatting information, writing drafts, and obtaining approvals.
• Determines proposal concept by identifying and clarifying opportunities and needs, studying requests for proposal (RFPs), and attending strategy meetings.
• Meets proposal deadlines by establishing priorities and target dates for information gathering writing, review, approval, and transmittal.
• Enters and monitors marketing tracking data.
• Coordinates requirements with contributors and contributes proposal status information to review meetings.
• Gathers proposal information by identifying sources of information, coordinating submissions and collections, and identifying and communicating risks associated with proposals.
• Develops proposal content by assembling information including project nature, objectives/outcomes/deliverables, implementation, methods, timetable, staffing, budget, standards of performance, and evaluation.
• Oversee the writing, quality control, and edits drafts including executive summaries, conclusions, and organization credentials.
• Prepares creative presentations by evaluating text, graphics, and binding and coordinating printing.
• Maintains quality results by using templates; following proposal-writing standards including readability, consistency, and tone; maintaining proposal support database.
• Obtains approvals by reviewing proposals with key providers and Project Managers.
• Improves proposal-writing results by evaluating and re-designing processes.

Qualifications / Skills:

• Adobe InDesign software experience required.
• Must have 2 years + experience in proposal writing in the construction, architect, or engineering field.
• Strong writing and editing skills and exceptional graphic layout design skills.
• Technical documentation and with strategic planning ability.
• Problem solving with strong time management and planning skills.
• Deadline-oriented.

Education:

• Bachelor’s degree in English, Journalism, Graphic Design, Marketing, English or Communication desired.

(Proposal, Writing, Construction, Engineering, Architecture, RFPs, Drafts, Writer, RFPs, InDesign, Creative)