Engineering Geology Jobs in Pickerington Ohio

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Maintenance Supervisor - 3rd Shift - Bexley, OH - $70k - $80k + 10% bonus

We are partnering with a well-established manufacturing facility in the food/CPG space that is seeking a hands-on Maintenance Supervisor to lead and support a 3rd shift maintenance team. This role is ideal for a technically strong leader who enjoys being on the floor, driving reliability, and building a safety-first culture.

You’ll be responsible for ensuring plant equipment runs reliably, supporting production goals, and leading continuous improvement efforts—all while maintaining strict compliance with food safety and regulatory standards.

Key Responsibilities

• Lead and promote a strong safety culture, ensuring compliance with OSHA, NFPA, and company safety standards
• Supervise and support maintenance technicians across preventive, corrective, and emergency maintenance activities
• Prioritize work orders to support production uptime and equipment reliability
• Utilize a CMMS system (MaintainX) to schedule PMs, track downtime, and close work orders
• Manage shift coverage, time & attendance, and technician workflow
• Track machine downtime and coordinate corrective actions
• Maintain spare parts inventory and ensure accurate transactions
• Support operations leadership in achieving safety, performance, and cost objectives
• Partner with Continuous Improvement and Engineering on capital projects and process improvements
• Oversee facility maintenance including HVAC and electrical distribution systems
• Interface with vendors and contractors to ensure work is completed safely and effectively

Food Safety & Quality

• Lead maintenance staff in compliance with GMPs, HACCP, sanitation, and food safety standards
• Support adherence to FDA, SQF, and other applicable regulatory requirements

Health & Safety

• Ensure safe work practices and safe working conditions at all times
• Promote high standards of health, hygiene, and workplace security

Qualifications

• High School Diploma or equivalent (required)
• 3+ years of maintenance supervisory experience in a Food Manufacturing environment
• Food processing or CPG experience strongly preferred
• Technical degree or maintenance-related certifications are a plus
• Strong working knowledge of OSHA and NFPA regulations
• Demonstrated understanding of food safety practices in manufacturing
• Ability to lift up to 50 lbs and perform physical job requirements
• Comfortable operating forklifts and scissor lifts
• Bilingual (English/Spanish) is a plus

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

• Lead project delivery, ensuring scope, quality, timing, and budget are met.
• Motivate and guide project teams, establish work plans and staffing, assign duties, and coordinate activities.
• Engage in crucial conversations as necessary to drive collaboration, team alignment, and maintain project progress.

• Evaluate project proposals, set timelines, funding, and deliverables.
• Define achievements, schedule tasks, and ensure alignment with business goals.

• Assess risks, develop mitigation plans, and monitor project progress.
• Maintain data integrity and ensure consistency in reporting and documentation.

• Communicate project status, prepare status reports, and implement reporting standards.
• Ensure project updates align with business objectives.

• Benchmark project management performance, identify improvement opportunities, and enhance project and portfolio management capabilities.
• Maintain alignment with established Bath & Body Works Project Management guidelines

• At least two years of demonstrated competency in a assistant project management role or above involving the execution of multiple projects or a large project.
• Experience in leading a team with the ability to motivate and empathize with others.
• Familiarity with industry standard project management methodologies (ex: Project Management Institute, PRINCE2 and Agile approaches) and tools.
• Exceptional verbal and written communication skills.
• Effective influencing and negotiating skills in an environment where this role may not directly control resources.
• Strong knowledge and understanding of business needs, with the ability to establish and maintain a high level of stakeholder trust and confidence.

• Required: Bachelor's degree or equivalent experience in supply chain management, business management, or project management fields
• Preferred: additional project management or supply chain education, training and/or certification through professional organizations such as CSCMP, APICS, edX, Coursera, and/or the Project Management Institute

• Lead with Curiosity & Humility
• Build High Performing Teams for Today & Tomorrow
• Influence & Inspire with Vision & Purpose
• Observe, Engage & Connect
• Strive to Achieve Operational Excellence
• Deliver Business Results

• Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office.
• 401k with company match and Associate Stock Purchase with discount
• No-cost mental health and wellbeing support through our Employee Assistance Program (EAP)
• Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance.
• Tuition reimbursement and scholarship opportunities for post-secondary education programs
• 40% merchandise discount and gratis that encourages you to come back to your senses!

Job Overview:

We are seeking a motivated and enthusiastic Packaging Distributor Sales Representative to join our dynamic sales team. As a Sales Representative, you will play a crucial role in driving our business growth by identifying new opportunities, building strong client relationships, and promoting our packaging solutions to customers.

Responsibilities:

Proactively identify and target potential clients within assigned territory.

Conduct market research to understand customer needs, preferences, and industry trends.

Develop and maintain a deep understanding of our product offerings, pricing, and value propositions.

Build and nurture relationships with existing clients to ensure customer satisfaction and loyalty.

Present and demonstrate our packaging solutions to clients, highlighting their benefits and unique features.

Collaborate with the sales team to develop and execute effective sales strategies.

Prepare and deliver persuasive sales presentations, both in person and virtually.

Meet and exceed assigned sales targets and quotas on a consistent basis.

Effectively manage and update customer information in the CRM system (HubSpot).

Stay updated on competitor offerings and market changes to maintain a competitive edge.

Provide feedback to the marketing and product development teams based on customer interactions.

Qualifications:

Bachelor's degree in Business, Packaging Engineering, or a related field (preferred but not required).

Excellent verbal and written communication skills.

Strong interpersonal skills and ability to build rapport with clients.

Self-motivated with a desire to learn and grow in a sales career.

Comfortable with using CRM software and other sales tools.

Ability to work independently and as part of a team.

Willingness to travel within the assigned territory, if required.

Prior sales experience or internship experience is ideal.

Additional Information

We offer a competitive base salary along with a commission structure, comprehensive training, and opportunities for career advancement within our organization. If you are a results-driven individual with a passion for sales and a knack for building relationships, we encourage you to apply for this exciting Entry Level Packaging Distributor Sales Representative role.

About Piedmont National

At Piedmont National, our solid values and unwavering commitment to our customers have created lasting relationships for over a half-century. Packaging products, packaging automation, and customized solutions tailored to your exact needs are what we do best. We believe that success is achieved by inspiring greatness in oneself and in one another.

Program Manager - Power Distribution

Location: Columbus, OH (Remote)

Are you an experienced Program Manager looking to join a supportive, passionate team? We have an attractive opportunity for you!

ABOUT THIS OPPORTUNITY:

As the Program Manager, you will oversee program execution from start to finish, providing strategic direction, mentorship to project managers, and exceptional client relationship management. You'll collaborate with cross-functional teams, monitor KPIs, optimize workflows, and ensure projects are delivered on time, on budget, and to the highest standards.

This is not an Information Technology-related position. If you do not have experience managing power distribution engineering/design projects, you will likely not be considered for the position.

Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period.

Responsibilities:

Project Leadership:

· Responsible for measuring and developing the project manager's abilities and effectiveness through KPI's and setting core competencies in accordance with corporate governance.

· Work closely with cross-functional teams to ensure smooth project implementation and customer satisfaction.

· Attend industry events, conferences, and networking opportunities to enhance the company's visibility.

· Serve as a mentor and coach to other project managers, offering guidance and support.

Program Planning and Strategy:

· Oversees project managers in the delivery of all program-related projects in accordance with the contractual agreement, scope, schedule, and budget of the project.

· Oversee the planning, scheduling, and execution of all phases of projects within the designated program in accordance with project management processes, policies, guidelines, and corporate governance.

· Develop and monitor high-level project workflows, validate project scopes, and collaborate on project priorities.

· Oversees the creation of proposals, kickoff meetings, and discovery calls.

Program Monitoring and Reporting:

· Prepare, review, and approve project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager.

· Provide program cost forecasting over the life of the project or program.

Program Closure:

· Ensure the successful closure of the program, including finalizing all program activities, obtaining acceptance from stakeholders, and conducting post-program evaluations.

· Document lessons learned and share best practices with the organization.

Communication:

· Maintain clear and consistent communication with program stakeholders, including executive leadership, project managers, and cross-functional teams.

· Provide regular program updates to management and stakeholders.

· Resolve conflicts and facilitate effective communication within the program team.

· Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated.

· Accountable for contractual correspondence and communication with all stakeholders, including identification and reporting of risks, liabilities, and opportunities.

Risk Management:

· Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle.

Budget Management:

· Manage Program level P&L reporting.

Customer/Client Relationship Management:

· Build and maintain strong relationships with existing clients, understanding their needs and providing exceptional service.

· Build relationships with Sr. Leadership within the customer organization.

· Build an understanding of the customer’s organizational structure and decision-making process.

· Identify and understand client challenges, propose solutions, and tailor product/service offerings accordingly.

· Conduct thorough market research to stay informed about industry trends, customer preferences, and competitor activities.

· Lead Program update calls and in-person meetings with external clients.

· Monitor and manage expectations of communication between staff and external clients.

· Develop and execute a strategic plan to identify and target new business opportunities in the market.

· Collaborate with the sales team to develop sales strategies, set targets, and achieve revenue goals.

· Prepare and deliver compelling presentations and proposals to potential customers.

· Negotiate contracts and terms of agreements with clients, ensuring a win-win outcome for both parties.

· Maintain accurate and up-to-date records of sales activities and client interactions in the CRM system.

· Keep abreast of the company's product/service offerings, updates, and enhancements.

· Other duties as assigned.

Competencies: Fit/Gap Analysis | Needs Analysis | Project Administration | Project Controls | Project Development | Project Estimation | Project Evaluation | Project Implementation | Project Lifecycle Management (PLM) | Project Management | Project Planning | Project Portfolio Management (PPM) | Project Scheduling | Project Status Reporting | Scope Management | Stakeholder Management | Project Management Software | Customer Satisfaction | Vendor Management | Contract Negotiation

WHAT WE'RE LOOKING FOR:

• Education Requirements – Bachelor’s of Science in Engineering/Engineering Technology or Bachelor's of Business Administration; or an equivalent combination of education and experience.
• Experience Requirements - A minimum of 7 years of experience in the Power Utility Industry with engineering, operations, and /or project management, including financial oversight and personnel development. And a minimum of 3 years of functional, or direct people management experience, with the proven ability to lead, motivate, and influence.
• Project Management Certification (PMP) or equivalent certification required.
• Proven experience in project management, with a track record of successfully delivering projects on time and on budget.
• Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities.
• Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth.
• Demonstrated a level of understanding of commonly used project management concepts, practices, and procedures.
• Adaptability and problem-solving abilities.
• Exceptional attention to detail and organizational skills.
• Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required as duties demand.
• Willing and able to travel regularly (30%+), which will include planned overnight travel
• Dependable transportation, a valid driver’s license, and insurance
• Able to pass a background check/drug test/driving record check.
• Authorized to work in the United States

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral communication, and to make discriminations in sound.

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this advertisement. This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

PM22

PIf4d394d302e3-37344-39887020