Engineering Geology Jobs in New Mexico

• 
  
• Analyze malfunctions and repair all two and four stroke engine driven equipment as required to ensure proper working condition for the customer
  
• Conduct preventive maintenance to avoid unnecessary repairs and down time
  
• Perform safety inspections on equipment
  
• Create work order and assess time and cost of repairs
  
• Maintains a clean and safe shop work environment
  
• Adhere to all governmental, company and equipment related safety requirements
  

• 
  
• A minimum of 2-5 years experience in diagnosing and repairing 2 and 4 stroke engines
  
• Rental experience preferred
  
• Good reading and comprehension skills
  
• Good customer service and communication skill
  
• The ability to consistently lift up to 50 pounds
  
• Must have your own tools
  
• Have a valid driver's license
  

Project Controls Engineer 4

Compa Industries is searching for qualified candidates for a Senior Project Controls Engineer position at the Los Alamos National Laboratory in Los Alamos, NM.

Salary: $85/hr - $90/hr

Location: Los Alamos, NM (Onsite)

Citizenship: US citizenship Required

Work Schedule: 9/80 schedule

The Project Controls Engineer will play a critical role in supporting the Earned Value Management System (EVMS) and the broader Project Controls System at Los Alamos National Laboratory (LANL). This position significantly influences the success of high-impact projects through expert cost engineering, scheduling, and project management support. The specialist will contribute to developing advanced techniques and standards, guiding project teams, and ensuring projects remain on schedule and within budget.

Responsibilities and Duties

• Perform cost estimating, cost analysis, and control activities for highly complex projects.
• Supervise and provide technical direction for planning/scheduling and cost engineering activities.
• Develop and maintain project schedules and monitor progress against milestones.
• Prepare, review, and present detailed cost engineering and scheduling reports.
• Analyze cost trends and schedule performance for management attention.
• Provide innovative solutions to project control challenges and guide technical teams.
• Act as a subject matter expert in EVMS tools and processes.
• Utilize independent judgment to determine the best course of action for achieving project objectives.
• Work under consultative direction and with minimal supervision to meet long-range project goals.
• Support project administrative and organizational tasks, including financial reporting and status updates.

Minimum Qualifications

Demonstrated experience in project controls functions, including:

• Planning and scheduling (development, control, analysis)
• Cost engineering (estimating, control, financial reporting, and analysis)
• Proficiency in multiple software applications used for project controls and cost analysis.
• Experience with supervision, personnel administration, and technical training.
• Understanding of financial reporting systems and cost control procedures.
• Ability to work independently with wide latitude in methods and evaluation criteria.

Desired Skills

• Subject matter expertise in project management and EVMS.
• Proven ability to implement corrective actions and monitor project progress.
• Familiarity with engineering principles related to technical project implementation.
• Knowledge of control account management (CAM) duties and responsibilities.
• Strong analytical skills with the ability to develop innovative solutions to complex issues.
• Viewed as an expert in the field with the ability to guide the development of future concepts and project methodologies.

Education and Experience Requirements

• Bachelor's degree in a relevant field.
• Minimum of twelve (12) years of related experience.
• An equivalent combination of education and experience may be considered.
• Post-graduate coursework or certifications in project controls or engineering disciplines is preferred.

Next Steps

If you are a driven and highly experienced project controls professional seeking a pivotal role in national security and scientific innovation, we encourage you to apply. Please submit your resume to be considered for this opportunity at Los Alamos National Laboratory. A recruiter from Compa Industries will contact qualified candidates to discuss next steps.

Why Work at COMPA Industries?

We strive to provide careers, not just jobs, for our employees. We invest in and serve the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems to meet customer mission-critical objectives.

For over 30 years, Compa has been a trusted partner in progress. We combine decades of technical expertise with a forward-thinking spirit, tackling intricate challenges in nuclear facilities alongside the brightest minds in science and engineering. Join us, and don't just build your career, build the future, with competitive compensation, a collaborative culture, and the chance to make a real difference for national security and beyond.

COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status.

COMPA's policy could disqualify an applicant who has certain criminal history from employment in particular positions.

Project Controls Engineer 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $91/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor's degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.

Emergency Physician On The Trail of the AncientsThe Community
- Crownpoint, NMCrownpoint is in McKinley County, New Mexico, founded in 1912.

The population was 2,278 at the 2010 census.

It is on the Trails of the Ancients Byway, one of the designated New Mexico Scenic Byways.

The Trail of the Ancients is a New Mexico Scenic Byway to prehistoric archaeological and geological sites of northwestern New Mexico.

It provides insight into the lives of the Ancient Puebloan, Navajos, Utes and Apache people.

Geological features include canyons, volcanic rock features, and sandstone buttes.

Several of the sites are scenic and wilderness areas with recreational opportunities.

In 1912, Crownpoint was founded by Samuel F.

Stacher as an Indian Agency to serve the Navajo People in the Pueblo Bonito Agency of Northwestern New Mexico.

A school house, agency office and power house were first built to accommodate future planned establishments.Crownpoint Health Care FacilityThe Crownpoint Health Care Facility serves a population of 200,000 Navajo people.

The staff consists of primary care physicians, physician assistants, and nurse practitioners, at a 32 bed hospital.

The daily inpatient load is nine; daily outpatient visits are 151; annual OB cases are 275; and annual ER cases number about 18,000 (6 ED Beds)Responsibilities:Emergency physicians shall provide immediate medical evaluation, examination, diagnosis, treatment, and/or referral of patients who present for care in the CHCF-ED.

Present for care includes patients referred to the Emergency Department by other medical providers in the Crownpoint Healthcare Facility system (such as outpatient clinics, outlying clinics, ED Fast track, inpatient, etc.).

The ED physician shall provide professional advice to other CHCF providers with regard to professional management of patients being treated and/or hospitalized.

The Contractor physician shall be a resource for contract providers and manage patients in the fast track portion of the Emergency Department as well.

The Contractor physician care shall cover the range of emergency room care typically provided in a rural civilian practice of similar size.

The following list is an example of the types of cases, but is not all-inclusive:Major trauma, including fractures of multiple extremities, stab wounds, open wounds of the chest and abdomen, head trauma, suspected spine injuries, lacerations, amputations;Major medical emergencies such as cardiac arrest, myocardial infarction, respiratory failure, shock;Obstetrical emergencies such as deliveries of single or multiple births, acute pregnancy complications, vaginal bleeding; Our Labor and Delivery Unit is on Long Term Divert.

When possible, we have an OB provider (CNM, FP/OB) on resource call.

Pediatric emergencies, including neonatal resuscitations;Acute psychiatric problems, including suicide attempts;Lower-acuity complaints including viral illnesses, other infections, minor orthopedic problems, minor trauma, alcohol abuse (i.e., urgent care patients);.Other miscellaneous medical problems both acute and chronic.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Aircraft Integration) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment.

Responsibilities

• Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management systems, technical bulletins, engineering orders, service bulletins, and airworthiness directives

• Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

• Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained

Basic Success Criteria

• Bachelor's Degree in Mechanical, Electrical, Aerospace, Systems Engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations

• 7+ years of aircraft design, manufacturing, inspection, and/or testing experience

• 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Success Criteria

• Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate

• Prototype/R&D development or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems

• Maintenance and rigging experience on P&W PT6A Engines/Airframes

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Albuquerque, NM, but will require frequent travel to San Martin, California.

Must be willing to travel 30% of the time (primarily training in San Martin, CA).

The estimated salary range for this position is $135,000 to $190,000. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $135K - $190K

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon Sensor Test Solutions (STS) is actively seeking an onsite Electrical Prototyping Fabrication Technician to join the Test Equipment Engineering Directorate in Tucson, Arizona.

The Test Equipment Engineering Directorate (TEE) includes all engineering disciplines responsible for systems design & test on every Raytheon product. Our engineers are responsible for each element of the development lifecycle for test including test requirements, test system design, flight simulations, hardware-in-the-loop, computer-in-the-loop, advanced engineering prototyping technology, flight operations for manned and unmanned vehicles, environmental testing, environmental characterization and engineering laboratory management.

We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world.

Electrical Prototyping Fabrication Technicians work in an engineering environment to co-develop engineering hardware in accordance with customer and internal requirements, as well as industry standards. Candidates will collaborate with multi-disciplined design teams across multiple projects to bring design concepts to fruition, providing rapid engineering, fabrication and prototyping solutions throughout the entire product lifecycle.

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

• Fabricate, maintain, modify, and repair complex prototype electrical assemblies
• Rely on extensive experience to interpret drawings, schematics, 3D models, written notes, and specifications
• Lead other technicians in the layout and fitment of electrical, electro-optical, electro-mechanical, and mechanical assemblies
• Adapt methods and procedures to test, analyze, and troubleshoot new hardware
• Apply advanced skills to test, inspect, and prove-in complex prototype electrical assemblies
• Lead in electrical/mechanical engineering drawing peer reviews to validate engineering design specifications in development of producible prototypes
• Assess complex designs to ensure producibility, maintainability, safety, and reliability
• Communicate build concerns to customers and collaborate on design improvements
• Work in closed/proprietary/classified areas without access to personal communication devices such as phones/tablets, etc

Qualifications You Must Have

• Typically requires an AA/AS degree (or other 2-year post high school training) with a minimum of 8 years relevant experience
• Experience in an engineering environment, testing and fabricating electrical assemblies in four or more of the following areas:
  • cables or wire harnesses
  • breakout boxes
  • chassis, circuit card modifications
  • racked electronic equipment
  • troubleshooting of systems in an integration environment
• Experience reading and interpreting electrical and mechanical drawings and schematics
• The ability to obtain and maintain a U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Experience analyzing and interpreting schematics and drawings to identify producibility issues
• Military electronics or avionics training
• Familiarity with 3D drawings and CAD tools
• J-STD-001 Solder certification
• IPC 610 & 620 Acceptability certifications and inspection experience

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

Location Information

This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America's 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature's best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ:

Raytheon Information -

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

About Castelion

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapon systems to give America and its Allies a definitive edge and deter future conflicts.

EHS Manager (Rio Rancho)

The EHS Manager will lead Environmental, Health, and Safety efforts for Castelion's Rio Rancho, New Mexico facility, supporting solid rocket motor manufacturing, integration, and test operations. This role is responsible for building and managing site EHS programs to ensure safe operations and regulatory compliance within a fast-paced, high-hazard manufacturing environment.

The EHS Manager will play a key role in facility startup, commissioning, and ramp to production, partnering closely with operations, engineering, and leadership to embed safety and environmental stewardship across development and manufacturing. The ideal candidate brings experience in process safety, hazard analysis, and regulatory compliance in aerospace, manufacturing, energetics, or other high-consequence environments, and will also provide periodic EHS support to Castelion's Midland, Texas test facility.

Responsibilities

• Serve as the EHS leader for the Rio Rancho facility, responsible for developing and managing site EHS programs, systems, and policies to ensure safe operations and regulatory compliance.
• Lead EHS planning and execution during facility startup, commissioning, and ramp to production, partnering with operations and engineering to integrate safety and environmental requirements into processes, equipment, and daily operations.
• Develop and maintain process safety and risk management programs, including hazard analyses (HAZOP, LOPA, FMEA) and risk assessments to identify and mitigate operational hazards.
• Ensure compliance with OSHA, EPA, ATF, NFPA, and applicable state and local regulations, including oversight of environmental programs such as hazardous waste, air emissions, stormwater management, and regulatory reporting.
• Implement and continuously improve safety programs through audits, inspections, training, and safety initiatives that strengthen operational discipline and safety culture.
• Lead incident investigations and root cause analysis for safety or environmental events, implementing corrective and preventive actions and maintaining site emergency response plans and preparedness.
• Provide periodic EHS support to Castelion's Midland, Texas facility, including audits, incident support, and program development as needed.

Basic Qualifications

• Bachelor's degree in Environmental Health & Safety, Environmental Engineering, Chemical Engineering, Industrial Engineering, Safety Engineering, or a related technical field.
• 5+ years of experience supporting EHS and process safety programs in manufacturing, test, or other high-hazard operational environments.
• Experience implementing process safety management and hazard analysis techniques (HAZOP, LOPA, FMEA).
• Strong working knowledge of OSHA, EPA, ATF, NFPA, and applicable state and local regulations.
• Experience leading incident investigations and corrective action programs.
• Hands-on experience developing and implementing EHS programs in manufacturing or test environments.
• Strong communication and leadership skills with the ability to influence cross-functional teams.
• Willingness and ability to travel periodically to support Midland, Texas operations.

Preferred Skills and Experience

• Professional certification such as CSP, CIH, or similar.
• Experience supporting solid rocket motor manufacturing, propulsion systems, energetics, or explosive/high-energy material operations.
• Experience supporting facility startup, commissioning, or greenfield manufacturing site development.
• Familiarity with EHS management systems such as ISO 14001 and ISO 45001.
• Experience applying continuous improvement and risk-based safety methodologies.

All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers three weeks of paid time off per year.

Leadership Qualities

Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support.

High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity.

Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity.

ITAR Requirements:

• To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

We put the unity in \"opportunity.

Opportunity Snapshot:

• Compensation: $55/hour
• Location: Carlsbad, NM
• Assignment Duration: 12 months+
• Work Schedule: Monday-Friday, 40 hours +
• Benefits: Comprehensive with 401K, holidays and PTO

Qualifications:

• Previous experience in a closely related position
• Associates degree in Drafting or equivalent from a two-year college or technical school
• General knowledge of 2D CAD software AutoCAD/Microstation/Bluebeam
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communications
• Strong in Oil & Gas
• High School diploma or equivalent required

Responsibilities:

• Transforms complex rough product designs into working documents using computer aided design (CAD)
• Develop computer generated drawings, isometrics, details, plans, schedules, and data sheets
• Prepare dimensional drawings for layouts and non-dimensional drawings such as one lines, etc
• Revises drawings based on instructions from engineers, etc
• Communicate effectively and work with other members of the design team of each individual project assignment. Interface management across disciplines
• Document control support, database administration, and progress reporting
• Coordination and communication of various issues among the company and contractor's engineering team that affect the discipline engineering drawings
• Keep Supervisor informed of discipline engineering progress, deviations, and execution concerns
• Support internal engineering general interest or Global Practice initiatives as requested by Supervisor

The Bergaila Way:

The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice.

Client Overview:

Our Client is an American energy company operating principally in the U.S. and Canada, that specializes in the drilling and production of unconventional oil and natural gas assets. Our client has a reputation for efficient resource development, environmental stewardship and community involvement, with a drive to meet the growing challenges of the domestic natural gas industry.

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Project Controls 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $95/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor's degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Compensation & Benefits

• Hourly Pay: $85/hr – $95/hr
• Potential short-term per diem available for qualifying candidates.
• Opportunity to work on high-impact national laboratory projects.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.