Engineering Geology Jobs in Hampton, IL

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

• Provide exceptional service to our customers by performing maintenance, diagnosis, and repairs on allied type construction and Aerial work platform equipment.
• Responsible for picking-up and delivering equipment when necessary.
• Complete associated paperwork.
• Establish and maintain service-oriented working relationship with customers.
• Provide excellent customer service to all customers.
• May perform other related duties as requested and/or assigned.

• Two or more years of related work experience.
• Must have a good understanding of gas and diesel engines, hydraulic and electrical systems.
• Must be a self-starter, organized, with strong customer service orientation.
• Automotive and Industrial Maintenance Technicians are encouraged to apply.
• Must be able to lift 75 lbs.
• Computer literacy required. Must be familiar with programs such as Microsoft Office Suite.
• Ability to follow all safety rules and wear proper safety equipment.
• Excellent planning & organizational skills are needed.
• Must take initiative, be team oriented and willing to adapt to change.
• Ability to respond to callouts, work overtime and weekends when needed.
• Excellent communication skills (written, e-mail, and verbal) are required.
• High School Diploma or equivalent is required.
• Must possess a valid driver's license and clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate

This position will work in the field/shop environment and at Customer jobsites. May on a continuous basis walk, bend and lift up to 75 lbs. Will be required to wear appropriate safety equipment (IE- Safety glasses or side shields, hearing protection, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Contract to Direct Hire Role!

*Looking for Design/CAD experience and we will teach the sprinkler side.

*Mechanical Designer or Mechanical Engineer for this role

Job Description

• Design fire suppression systems including wet, dry, pre-action, and foam fire sprinkler systems
• Perform detailed shop drawings (field installation drawings and hydraulic calculations), field engineering functions (on the jobsite support and review), and operation planning (field installation support)
• Compile and prepare plan submittals (shop drawings) and material submittals for review by architects, engineers, clients, and authorities having jurisdiction Coordinate fire sprinkler design with the building structure and other MEP subcontractors.
• Prepare project material stock lists to be used for material procurement assist with Field engineering troubleshooting and support for the installation operations on the jobsite Prepare \"as-built\" drawings for in-house archive and client files.
• General understanding of job costs related to engineering, material and fabrication, and labor.
• Work productively and meet deadlines timely.
• Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment.
• Perform work safely and effectively.
• Understand and follow oral and written instructions, including warning signs, equipment use, and other policies.
• Work during normal operating hours to organize and complete work within given deadlines.
• Willing to teach.

Skills Required

• Experienced with MS Excel, Word, and AutoCAD preferred.
• High level of self-discipline, motivation, and ability to operate in a team environment with strong interpersonal, written and verbal communication skills.
• Team player, but able to work independently; Highly motivated, with a demonstrated passion for excellence and taking initiative
• Strong organizational skills, time management, and attention to detail
• Regular, reliable attendance
• Experience with AutoSPRlNK, HydroCAD, or SprinkCAD A PLUS

We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

JOB-10042598

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Description

Arconic is currently in search of an entry level Electrical Engineer to join our Plate Department based in our Davenport, IA location.

At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization.

Job Summary:

This entry level Electrical Engineer is a great opportunity to apply your technical skills while coordinating numerous capital projects across the Plate department. This role is driven by self-directed work and collaborative efforts with a team of Electrical Engineers, Technical staff, maintenance, and production across the department.

The Electrical Engineer reports to the Lead Electrical Engineer in the department and will work Monday through Friday during daytime hours. You will support off-shifts as needed for your respective projects.

In this role, you will:

• Coordinate all phases of assigned area electrical engineering projects from concept, scope development, written specifications, bid solicitations, design, manufacturing, equipment commissioning, and project closure.
• Lead and participate in problem solving efforts with multi-discipline technical staff, maintenance and production.
• Use PI Vision and Data Link to analyze process issues and provide input to solve process problems.
• Create and develop electrical control solutions that will support process improvements and improve equipment reliability.
• Assist production and maintenance with equipment and process issues.
• PLC/HMI and controls redesign and upgrades of existing processes.
• Install and troubleshoot camera systems on industrial equipment.
• Incorporate SMART Manufacturing principles and tools into automated inspection systems to improve processes, data collection/analysis, and drive quick results in recovery improvements.

Qualifications

You have:

• Bachelor's Degree in Electrical Engineering Technology or Electrical Engineering from an accredited institution
• 1-3 years of Electrical Engineering experience (including Internship)
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire Visa sponsorship is not available for this position
• This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.
• 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.

Exceptional Candidates possess:

• Manufacturing experience in a highly industrial environment
• 1-3 years' experience with PLC's, HMI's, AC/DC drives & motors, measuring devices and ethernet cameras
• Proficiency with Rockwell programming software (i.e.: RS Logix and FactoryView)
• Proficiency in Microsoft Office Suite and Project programs
• Good oral and written communication skills in a variety of settings (shop floor, peers, plant leadership, etc)
• Demonstrated success as a project implementation manager, including budget and schedule development.

About Us

Arconic Corporation is a leading provider of aluminum sheet, plate and extrusions, as well as innovative architectural products, that advance the automotive, aerospace, commercial transportation, industrial and building and construction markets. Building on more than a century of innovation, Arconic helps to transform the way we fly, drive, and build.

We live our core values and commit to delivering sustainable value to our customers, our employees, our communities and our stakeholders.

At Arconic, we:

Act With Integrity.

We lead with respect, honesty, transparency and accountability.

Safeguard our Future.

We protect and improve the health and safety of our employees, communities and environment.

Grow Stronger Together.

We cultivate an inclusive and diverse culture that advocates for equity.

Earn Customer Loyalty.

We build customer partnerships through best-in-class products and service.

Drive Operational Excellence.

We pursue continuous improvement through innovation, agility, people development and collaboration.

Create Value.

We achieve success by generating and growing value for our stakeholders.

This position is subject to Export Control Law

This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.

• 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.

Equal Employment Opportunity Statement

Arconic is an equal opportunity employer. We take action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics.

About The Team

ABOUT Davenport Works

Davenport Works is the country's largest aluminum rolling mill, it was opened in 1948 and currently employs more than 2,000 people and ships product worldwide. It is in Riverdale in the Quad Cities (Davenport and Bettendorf in southeastern Iowa, and Rock Island and Moline in northwestern Illinois). The Quad Cities is 3 hours south-west of Chicago, 4 hours north of St. Louis, and less than 3 hours from Des Moines. The Quad Cities is home to St. Ambrose University among 8 educational institutes. Major outdoor summer music festivals include the Bix Beiderbecke Memorial Jazz Festival, Mississippi Valley Blues Festival, and River Roots Live.