Engineering Applications Of Artificial Intelligence Jobs in Hell, MI
1,404 positions found — Page 5
Position Summary:
The RT Vent Field Clinician is a Respiratory Therapist providing respiratory patient care to Vent patients for optimal outcomes. Provides respiratory care to patients in alternate sites in accordance with AdaptHealth’s policies and procedures. Respiratory care will be preventative, rehabilitative, and palliative in nature. The RT will utilize all the resources available within the agency and community to accomplish care objectives. This position will provide education and care to the patient and communicate with team, physicians and referral sources and other patient agencies ensuring prompt attention to patient care issues.
Essential Functions and Job Responsibilities:
- Utilizes various sources of information to attain greater competence about his or her position, including attending educational events (including attending optional in-services) and asking questions.
- Utilizes acquired knowledge to increase his or her competencies.
- Consistently demonstrates ability to adequately complete all documentation and charting procedures in compliance with company policy and procedures.
- Maintains complete and accurate patient files by updating all documents per company policy and procedures.
- Reviews Plan of Treatments and Care Plans to assure they are accurate and up to date.
- Documents procedures including how the patient tolerated a procedure, side effects and other pertinent information.
- Assists with authorization for Ventilator referrals for patients.
- Shows adequate knowledge of respiratory equipment and displays ability to utilize knowledge in the clinical setting.
- Displays knowledge of assessment skills and demonstrates application of clinical skills during set-ups, follow-ups, and in-services.
- Participates in discharge planning of highly technical cases.
- Performs clinical assessments as needed and reports results and recommendations to the referral and physician.
- Participates in highly technical discharges and prepares in advance to assure the patient and caregivers have a smooth transition to the home setting.
- Performs in-services to hospital staff, referrals, other professionals regarding equipment & issues of clinical nature.
- Follows up with physician and referrals regarding patient status and documents accurately and in a timely manner.
- Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), infection control and hazardous materials handling.
- Works to promote AdaptHealth by new program development, operational backup, personal visits, coordination of educational activities, etc.
- Assume on-call responsibilities during non-business hours in accordance with company policy.
- Uses clinical expertise in evaluating vent patients records once a ventilator set up has been completed by the branch Respiratory Therapist.
- Ensures accuracy of prescriptions and plan of care was followed and documented. Also reviews delivery tickets, home inspection, ventilator check, and patient equipment competencies are complete and documented.
- Maintains proficient knowledge of ventilator patients including compliance software, new technology, units, and supplies supported by Adapthealth.
- Ability to demonstrate and instruct on use of vent units and supplies. Ability to make decisions for patients based on compliance data and assessment.
- Communicates with team, physicians and referral sources and other patient agencies ensuring prompt attention to patient care issues.
- Maintains working knowledge of Medicare/Medicaid and other third-party payer guidelines related to ventilation.
- Electronically documents patient care activity, intervention provided and all communication regarding the patient. Documentation is accurate, complete and follows company standards.
- Appropriate steps taken to ensure recommendations and orders sent are acknowledged and followed up in a timely manner.
- Responsible for accuracy, clarity, and timeliness of verbal and written communications as it relates to role.
- Responsible for documentation that supports data collection to track and trend outcomes.
- Assists in establishing clinical documentation when needed for third party reimbursement or justification.
- Uses knowledge in working with referral sources to educate about best practice standards.
- Works collaboratively and pro-actively with peers and other team members to resolve issues and assure optimum outcomes for patients, referral sources and staff.
- Acts as a resource on practices and processes to provide appropriate guidance.
- Develop and maintain working knowledge of current HME products and services offered by the company.
- Maintain patient confidentiality and function within the guidelines of HIPAA.
- Completes assigned compliance training and other educational programs as required.
- Maintains compliant with AdaptHealth’s Compliance Program.
- Perform other related duties as assigned during and outside of normal business hours as needed.
Competency, Skills, and Abilities:
- Experience with ventilator patients
- Competent in Ventilator, Airway Clearance, and Oxygen therapy administration and management
- Able to perform clinical assessments.
- Equipment troubleshooting and maintenance skills.
- Decision making skills.
- Expert communication and interpersonal skills
- Ability to prioritize tasks and manage multiple projects.
- Strong analytical and problem-solving skills with attention to detail
- Proficient use of Microsoft Office Suite – Excel, Word, and PowerPoint
- Solid ability to learn new technologies and possess the technical aptitude required to understand flow of data through systems as well as system interaction.
- Knowledge of the regulatory requirements at the state, federal, and local level
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Ability to adapt and be flexible in a rapidly changing environment, be patient, accountable, proactive, take initiative and work effectively on a team.
Requirements:
Education and Experience Requirements:
- Associates degree from an AMA approved respiratory program,
- Valid and unrestricted RT clinical license in all states serviced by the branch.
- Must be CPR certified,
- One (1) year of clinical experience as a Health Care RT, HME RT or clinical nursing with Vent experience.
- Valid and unrestricted driver’s license
Physical Demands and Work Environment:
- Must be able to lift 50 pounds, stand, bend, stoop, and be able to sit at a computer for extended periods of time.
- Must be able to perform one-man CPR.
- Ability to perform repetitive movements of the upper extremities’ motions of wrists, hands, and/or fingers due to extensive computer use.
- May be exposed to unsanitary conditions in some home settings.
- Work environment may be stressful at times, as overall office activities and work levels fluctuate.
- May be exposed to high crime areas within the service community.
- Subject to long periods of sitting and exposure to computer screen.
- May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially in
**Up to $10,000 Sign on Bonus, based on relevant experience**
DMC Detroit Receiving Hospital, Michigan's first Level I Trauma Center, helped pioneer the evolution of emergency medicine and currently has one of the busiest and most well-equipped emergency departments anywhere. The first and largest verified burn center in the state is at Receiving, and it is one of only 43 in the nation. Receiving also offers the state's leading 24/7 hyperbaric oxygen program, Metro Detroit's first certified primary stroke center, and the nationally recognized and accredited DMC Rosa Parks Geriatric Center of Excellence.
SUMMARY
The Registered Nurse (RN) is a member of the Patient Care Services Team. The Registered Nurse is responsible for the satisfactory completion of nursing care by the nursing team. The RN manages and provides patient care activities for a group of patients and their families through application of independent judgment, communication and collaboration with all team members including ancillary and support services. The role of the Registered Nurse at the DMC encompasses leadership, partnership, collaboration, teaching and supervision. The RN establishes and maintains collaborative relationships with physicians and other health care providers to achieve desired patient outcomes throughout the continuum of care. The RN delegates, assesses, provides and evaluates patient care. The RN assesses, monitors and evaluates patient status by observing the patient, noting data collected by other team members and analyzing this information to independently develop a plan of nursing care which is implemented by the care delivery team under the supervision of the RN. The RN provides and delegates patient care activities to team members based upon patient needs and team member skills/abilities and supervises the delivery of care by other team members. The RN evaluates patient response to treatment and nursing interventions and if needed, revises the plan of care. The RN monitors patient progress and prepares patient for discharge, utilizing established clinical pathways. The RN reports directly to senior unit management, participates in shared decision-making activities and establishes relationships with professionals in other healthcare and community organizations to develop strong partnerships that support improved patient outcomes and the health of the community served.
GENERAL DUTIES:
1. Supervises, including assignment and evaluation of subordinate team members, and provides patient care on a daily basis.
2. Participates in the employment process related to peers and subordinate team members; addresses employee problems, complaints, disputes or requests as the first level of supervision; evaluates their performance post hire; and is authorized to issue work improvement plans to subordinates.
3. Adheres to the mission, vision, values and code of Business Conduct as established by the DMC and its associate facilities.
4. Complies with approved policies, procedures, guidelines and standards as established by the DMC and its associated facilities.
5. Demonstrates an understanding of and a commitment to customer service values of respect, courtesy, ownership, privacy, professionalism and responsiveness.
6. Completes mandatory education and training as defined by the DMC and the specific employer-facility.
7. Maintains a safe working environment through compliance with established policies and procedures and timely reporting of safety variances.
8. Demonstrates a commitment to improving the work environment through participation in meetings, timely and effective communication and an embracement of cultural diversity.
PRINICIPAL/ESSENTIAL DUTIES:
1. Utilizes various strategies to assess patient, family, employee and environment of care strengths and weaknesses to determine appropriate action plan(s)
2. Develops a detailed plan of care, which includes patient / family education, based on initial and on-going assessment findings to optimize patient outcomes.
3. Communicates with patients, families, subordinate staff and peers to ensure that plans and associated interventions are understood, operationalized and revised, as appropriate.
4. Assigns, delegates, and supervises other employees and intervenes as appropriate to ensure that the plan of care is carried out and that established outcomes are achieved through availability and appropriate utilization of human, material and financial resources.
5. Evaluates the effectiveness of plans and interventions to promote optimum achievement of established goals.
6. Collaborates formally and informally with other members of the healthcare team, including facility and DMC representatives, to identify opportunities for improvement and develop strategies for enhancing clinical practice.
7. Establishes relationships with professionals in other healthcare and community organizations to develop strong partnerships that support improved patient outcomes and the health of the community served.
8. Provides supervision, including guidance, counseling, teaching and mentoring, to targeted peers and subordinates to enhance learning experiences and improve the professional practice environment within the designated work setting.
1. Graduation from an accredited school of nursing.
2. BSN preferred.
3. Licensed to practice as a Registered Nurse (RN) in the state of Michigan.
Job: Nursing
Primary Location: Detroit, Michigan
Facility: DMC Receiving Hospital
Job Type: Full Time
Shift Type: Night
The Team Leader is responsible for assisting the Store Manager and Assistant Store Manager with the execution of operational, sales, and merchandising objectives by delivering a Legendary Customer Experience. The Team Leader is also responsible for promoting a safe and productive work environment for all Team Members, customers, and vendors, as well as training Team Members on the appropriate application of policies and procedures.
Do you love the life out here and want to share it with others? At Tractor Supply we strive to make the life out here a little bit better each day for both our neighbors and our teams.
Essential Duties and Responsibilities (Min 5%)It is essential that you be available, flexible, adaptable, and service-oriented, as you must be able to fulfill all of the following requirements:
- Maintain regular and predictable attendance.
- Work scheduled shifts, and have the ability to work varied hours, days, nights, weekends, and overtime as dictated by business needs.
- Uphold and promote a safe and productive work environment by following and enforcing policies and procedures.
- Deliver on our promise of Legendary Customer Service through GURA:
- Greet the Customer.
- Uncover Customer's Needs & Wants.
- Recommend Product Solutions.
- Ask to Add Value & Appreciate the Customer.
- The Team Leader is required to perform a combination of the following duties during 95 percent of their day. Although the mix may vary from one day to another, our business and staffing model makes it essential that every person in the Team Leader position be able to perform all of the following duties accurately, efficiently and safely on a regular basis and without advance notice:
- Execute assigned basic, promotional, and seasonal merchandising activities.
- Perform Opening/Closing procedures.
- Transport and make deposits to bank.
- Assess store conditions and assign duties.
- Organize and prioritize workflow through the use of the daily planner.
- Recovery of merchandise.
- Participate in mandatory freight process.
- Perform regular and promotional price change activities.
- Resolve customer complaints/issues and ensure the customer has a Legendary shopping experience that differentiates from the competition.
- Adhere to loss prevention standards and respond to any alarm calls as needed.
- Communicate with Team Members on job functions, responsibilities and financial goals.
- Operate cash register/computer supervising cash handling procedures.
- Assist Team Members on appropriate application of policies and procedures.
- Ensure the safety and well-being of birds. Sanitize and maintain poultry holding tanks and care for birds as required.
- Operate Forklift and Baler.
- Complete all documentation associated with any of the above job duties.
- Obtain license or certifications as needed by the business.
- May be required to perform other duties as assigned.
Retail experience and/or farming, ranching, pet/equine, or welding knowledge is strongly preferred. Supervisory experience preferred. Must be at least 18 years of age and possess a valid driver's license. High school diploma or equivalent is preferred, but not required. Regardless of education level, you must be able to read, write, and count accurately.
Preferred Knowledge, Skills or AbilitiesBasic computer skills. Ability to read, write, and count accurately. Strong interpersonal skills and ability to resolve issues ethically and with minimal conflict. Ability to perform and execute principle responsibilities of Team Members.
Working Conditions- Working environment is favorable, generally working inside with moderate noise.
- Work shifts vary from one store to another, but generally are no less than 4 hours and may exceed 8 hours.
- Promote a safe and productive work environment for Team Members and customers and adhere to Company safety training and guidelines.
- Indoor floors and outdoor lots generally are hard surfaces (concrete, asphalt, etc.) lighting and temperature are adequate.
- Ability to work outdoors in adverse weather conditions.
- Ability to move and transfer merchandise, weighing up to 50 pounds, throughout the store.
- Ability to push and pull merchandise up to 2,000 pounds with the assistance of proper material handling equipment (e.g. pallet jack).
- Ability to occasionally lift or reach merchandise overhead.
- Ability to frequently stand, kneel, twist, crouch, squat, bend, stoop, and climb ladders.
- Ability to move throughout the store for an entire shift.
- Ability to safely access all areas of the store including selling floor, side lot, stock area, and register area.
- Ability to operate and use all equipment necessary to run a store (e.g. dolly, handtruck, forklift, baler, computer, cash register) (forklift and baler requirements do not apply if under the age of 18).
- Ability to constantly operate store equipment such as computer, cash register, and other store equipment.
- Ability to read, write, and count accurately to complete all documentation.
- Ability to utilize strong written and verbal communication skills to communicate effectively with team members and customers.
- Ability to process information / merchandise through the point-of-sale system.
- Ability to handle and be in contact with birds/poultry.
- Ability to successfully complete training and certification to dispense propane, and to dispense propane (propane certification and dispensing requirement does not apply if under the age of 18).
- Ability to successfully complete all required training.
- Ability to travel as required in support of district needs.
- Ability to drive or operate a vehicle for business needs.
- This position is non-sedentary.
- Ability to successfully complete training and certification for various business needs.
This job description represents an overview of the responsibilities for the above referenced position. It is not intended to represent a comprehensive list of responsibilities. A team member should perform all duties as assigned by his/her supervisor.
Company InfoAt Tractor Supply and Petsense by Tractor Supply, our Team Members are the heart of our success. Their dedication, passion, and hard work drive everything we do, and we are committed to supporting them with a comprehensive and accessible total reward package. We understand the evolving needs of our Team Members and their families, and we strive to offer meaningful, competitive, and sustainable benefits that support their well-being today and in the future. Our benefits extend beyond medical, dental, and vision coverage, including company-paid life and disability insurance, paid parental leave, tuition reimbursement, and family planning resources such as adoption and surrogacy assistance, for eligible Team Members. While all Team Members have access to a broad range of rewards, eligibility and specific offerings may vary depending on the role, individual plan requirements and eligibility criteria.
Job Title: Emissions Certification Engineer
Location: Dearborn, MI
Role Overview:
We are seeking an experienced Emissions Certification Engineer to support regulatory certification and compliance activities for gasoline, diesel, and hybrid powertrain programs. The candidate will work closely with calibration, testing, and regulatory teams to ensure vehicles meet EPA and CARB emissions standards.
Key Responsibilities:
- Lead vehicle and engine emissions certification submissions to EPA & CARB
- Prepare and manage certification documentation per CFR requirements
- Coordinate emission testing (FTP-75, US06, HWFET, WLTP, etc.)
- Support powertrain calibration teams to achieve emissions compliance
- Analyze emission test data and resolve compliance gaps
- Support OBD, evaporative emissions, and durability requirements
- Interface with regulatory agencies during audits and reviews
Required Skills:
- Strong knowledge of U.S. EPA & CARB regulations
- Hands-on experience in automotive emissions certification
- Background in Powertrain / Engine Calibration
- Familiarity with 40 CFR Part 86 & Part 600
- Experience working in OEM environment (Ford preferred)
Preferred:
- Hybrid / Electrified vehicle certification experience
- Experience with certification tools & reporting systems
- Bachelor’s degree in Mechanical / Automotive Engineering
Embedded Software Engineer – Engine Controls GTM/AUTOSAR CDD development
Auburn Hills, MI
Full time Role
Customer wants Engineer having experience on Engine CDD Development using GTM timer module such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.
Must to Have
• Experience with Infineon Generic Timer Module (GTM) for engine timing control.
• Understanding of digital signal processing concepts used in knock detection algorithms.
• Experience with AUTOSAR MCAL configuration using EB Tresos.
Key Responsibilities
• Develop Complex Device Drivers (CDD) for gasoline Engine Control Module (ECM/PCM) functions on ECU platform.
• Implement software for engine sensing and actuation including crank/cam position, engine speed, and direction detection.
• Support development of engine control features such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.
• Implement above timing features using GTM-based timing and signal processing logic using modules such as TIM, TOM, ATOM.
• Integrate CDD logic with AUTOSAR BSW modules including NvM, RTE, OS, Digital IO, and Diagnostics.
• Support AUTOSAR BSW integration and ECU software architecture implementation.
• Work with MCAL drivers and support integration activities using EB Tresos Studio (modules such as ADC, DSADC, MCU, FEE, DMA, IRQ).
• Develop and debug software on Infineon AURIX TC38x microcontrollers.
• Support ECU software integration, testing, and debugging using Lauterbach Trace32 and ETAS INCA tools.
• Work closely with calibration, system, and hardware teams to support engine control feature development.
• Support issue analysis and root cause debugging during integration and validation phases.
Required Skills
• Strong Embedded C programming experience.
• Experience with ECM/PCM gasoline engine control software development.
• Hands-on experience in AUTOSAR BSW integration and CDD development.
• Experience with Infineon AURIX TC3xx (TC38x) microcontroller platform.
• Knowledge of engine sensing interfaces such as cam/crank sensors and injector/spark control mechanisms.
Hi,
I hope this email finds you well. I have an exciting job opportunity available. Please review the details below and reply with your resume if you are interested.
Job Title: BOM / PLM Engineer
Location: Dearborn, MI
Role Overview
We are seeking a detail-oriented BOM / PLM Engineer to manage and maintain product structures, Bill of Materials (BOM), and Product Lifecycle Management (PLM) data across the product development lifecycle. The role involves coordinating with cross-functional teams such as design, manufacturing, procurement, and quality to ensure accurate product data, configuration control, and engineering change management.
Key Responsibilities
- Create, maintain, and manage Bill of Materials (BOM) structures in the PLM/ERP system.
- Ensure data accuracy and integrity for parts, assemblies, and product configurations.
- Manage Engineering Change Orders (ECO), Engineering Change Requests (ECR), and Change Notices (ECN) in PLM systems.
- Support product lifecycle processes from concept through production and service.
- Collaborate with engineering, manufacturing, supply chain, and quality teams to ensure proper product documentation.
- Maintain part numbering systems, revisions, and version control.
- Ensure proper release of engineering documentation including drawings, specifications, and technical documents.
- Support configuration management and product traceability.
- Assist with new product introduction (NPI) by ensuring BOM readiness and documentation compliance.
- Perform BOM audits and validation to maintain system accuracy.
- Coordinate with ERP teams to ensure PLM–ERP data synchronization.
Required Qualifications
- Bachelor’s degree in Engineering, Mechanical Engineering, Industrial Engineering, or related field.
- 2+ years of experience working with BOM management and PLM systems.
- Experience with PLM tools (Windchill, Teamcenter, Enovia, Agile PLM, Arena, or similar).
- Knowledge of Engineering Change Management processes.
- Experience working with ERP systems (SAP, Oracle, etc.) is a plus.
- Strong understanding of product structure and configuration management.
- Excellent attention to detail and documentation skills.
Job Title: PLM Engineer
Location: Dearborn, MI
Role Overview
We are seeking a detail-oriented BOM / PLM Engineer to manage and maintain product structures, Bill of Materials (BOM), and Product Lifecycle Management (PLM) data across the product development lifecycle. The role involves coordinating with cross-functional teams such as design, manufacturing, procurement, and quality to ensure accurate product data, configuration control, and engineering change management.
Key Responsibilities
- Create, maintain, and manage Bill of Materials (BOM) structures in the PLM/ERP system.
- Ensure data accuracy and integrity for parts, assemblies, and product configurations.
- Manage Engineering Change Orders (ECO), Engineering Change Requests (ECR), and Change Notices (ECN) in PLM systems.
- Support product lifecycle processes from concept through production and service.
- Collaborate with engineering, manufacturing, supply chain, and quality teams to ensure proper product documentation.
- Maintain part numbering systems, revisions, and version control.
- Ensure proper release of engineering documentation including drawings, specifications, and technical documents.
- Support configuration management and product traceability.
- Assist with new product introduction (NPI) by ensuring BOM readiness and documentation compliance.
- Perform BOM audits and validation to maintain system accuracy.
- Coordinate with ERP teams to ensure PLM–ERP data synchronization.
Required Qualifications
- Bachelor’s degree in Engineering, Mechanical Engineering, Industrial Engineering, or related field.
- 2+ years of experience working with BOM management and PLM systems.
- Experience with PLM tools (Windchill, Teamcenter, Enovia, Agile PLM, Arena, or similar).
- Knowledge of Engineering Change Management processes.
- Experience working with ERP systems (SAP, Oracle, etc.) is a plus.
- Strong understanding of product structure and configuration management.
- Excellent attention to detail and documentation skills.
Job Title: Controls Engineer
Location: Grand rapids, MI
Duration: Long Term
Job Description :
Design and build automation and robotic equipment.
Own and implement solutions from project concept to installation.
Conduct machine concepting, proof-of-principle, electrical design/layout, software design/programming, and debug hardware/software.
Perform acceptance testing and installation/integration at the factory.
Stay updated with rapidly changing technology to deliver optimal solutions.
Essential Skills
Proficiency in Siemens TIA Portal.
6 + years of experience with TIA Portal.
PLC programming, HMI/SCADA design, and drive configuration.
Knowledge of controls hardware including sensors, remote IO, servos, VFDs, machine vision, and barcode readers.
Familiarity with industrial networking protocols such as Profinet, Ethernet I/P, and EtherCAT.
Experience with 6-axis robots, primarily FANUC.
Additional Skills & Qualifications
Bachelor’s Degree in Electrical Engineering, Controls and Computer Control Systems, Mechatronic Engineering, Automation Engineering, Mechanical Engineering, or equivalent experience.
Work Environment
Job Title: EDS Component Design Engineer
Location: Novi, MI
Role Overview
We are seeking an experienced EDS Component Design Engineer to lead the design and development of electrical distribution system (EDS) components for next-generation electric pickup trucks and rugged SUVs. The role will involve full lifecycle responsibility from concept design through validation, testing, and manufacturing launch.
The ideal candidate will have strong expertise in wire harness components and power distribution systems, working closely with cross-functional teams including engineering, purchasing, finance, and suppliers to deliver high-quality automotive components.
Key Responsibilities
- Design and develop EDS components including shields, troughs, grommets, connectors, terminals, and power distribution components.
- Support development from concept (clean sheet design) through virtual validation, testing, sign-off, and manufacturing launch.
- Collaborate with purchasing and finance teams to create technical specifications for sourcing and supplier quoting.
- Develop and maintain a standard library of core EDS components aligned with global automotive standards.
- Work closely with VW Group module owners and suppliers to define and release wiring and power distribution components.
- Perform virtual and physical verification testing, including field testing.
- Ensure compliance with safety standards and U.S. regulatory requirements.
- Contribute to production facility design for electric trucks and SUVs.
- Manage supplier deliverables to meet cost, quality, and program timing targets.
- Identify opportunities to improve system performance and consumer experience.
Required Qualifications
- Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Systems Engineering, or related field.
- 5+ years of experience in automotive wire harness or power distribution component design.
- Strong expertise in EDS component design and release processes.
- Experience working across complete product development lifecycle (design, testing, launch).
- Knowledge of Six Sigma engineering methods for design and problem solving.
- Familiarity with CAE tools or computer-aided engineering environments.
- Strong collaboration skills with cross-functional teams and suppliers.
Preferred Skills
- Experience working in electric vehicle platforms or advanced automotive programs.
- Knowledge of automotive electrical architecture and power distribution systems.
- Ability to work in fast-paced product development environments.
Job Title: Hardware Technician
Location: Novi, MI
Job Type: Long-Term
Job Summary:
We are seeking a detail-oriented and hands-on Hardware Technician to support hardware test bench setup, maintenance, and integration activities. The ideal candidate will have strong experience in electronics hardware environments, with the ability to install, troubleshoot, and maintain test systems while collaborating closely with engineering teams.
Key Responsibilities
- Install, wire, and configure hardware test benches according to engineering specifications and safety standards
- Perform routine maintenance, troubleshooting, and repair of test bench components and equipment
- Assist engineering teams with hardware integration, diagnostics, and validation testing
- Support calibration and functional verification of electronic test systems
- Maintain inventory of tools, components, and lab equipment
- Document test configurations, procedures, maintenance activities, and issue resolutions
- Ensure compliance with lab safety protocols and maintain a clean, organized workspace
- Work independently and collaboratively within cross-functional teams
Required Qualifications
- Associate’s degree or technical certification in Electronics, Electrical Engineering Technology, or a related field
- Minimum 2 years of experience in hardware setup, lab support, or electronics test environment
- Hands-on experience with wiring, soldering, crimping, and cable assembly
- Proficiency in using diagnostic tools such as multimeters and oscilloscopes
- Strong troubleshooting and problem-solving skills
- High attention to detail and documentation accuracy
- Ability to work in a fast-paced engineering environment
